Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!
Jigs for Manual Tightening (página 2)
Hand-tightening jigs are jigs for fixing a workpiece to a table or base jig of a machine tool by hand-tightening. This category includes clamping parts, clamping units and locating elements. Clamping parts are individual parts of jigs for hand tightening of workpieces and include screw jacks, toggle clamps, and T-slot nuts. Clamp units are jigs for fixing workpieces similar to clamping parts, but they are set consisting of various parts. Locating elements are tools and optional parts used for positioning and raising workpieces and supporting workpieces, such as guide blocks and straight pins.
751 itens
* Informações sobre dias de expedição, custos de expedição e preços
NABEYA
Attachment for No. E-175A can be used for SJK type. SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.Ler maisConfigurarPreço (excluindo IVA) a partir de:100.45 €Data de envio regular:8 dias úteis
NABEYA
A clamp bar for L-type nut runners. This product can be additionally processed by the customer.[Features]· Torque control and speedy clamping can be performed by using Nut Runner.· Quasi-hydraulic operability, no piping is required so it is handy to use.· Clamp bar springs up to easily attach/detach the workpiece.· Free from troubles such as oil leakage as it does not use oil.Ler maisConfigurarPreço (excluindo IVA) a partir de:633.96 €Data de envio regular:8 dias úteis
NABEYA
Q Lock (Screw Type) Clamp Bushing
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.Ler maisConfigurarPreço (excluindo IVA) a partir de:114.72 €Data de envio regular:6 dias úteis
NABEYA
EN 1.7264 Equiv., Hardening HRC60 eccentricity height cylinder.Compatible bolts are M12/16.Ler maisConfigurarPreço (excluindo IVA) a partir de:61.98 €Data de envio regular:10 dias úteis
ESCO
clamping parts (for hand tightening), T-slot nut.[Materials]: Hardening steel (C45)Ler maisConfigurarPreço (excluindo IVA) a partir de:4.79 €Data de envio regular:9 dias úteis
ESCO
【Product Specifications】・Material-Quenched steel(C45)・TSlot…8・Screw…M6・A…10・C…13・D…6・E…26Ler maisConfigurarPreço (excluindo IVA) a partir de:13.27 €Data de envio regular:9 dias úteis
ESCO
【Product Specifications】・Material-Quenched steel・Screw…M24・A…200・B1…35・B2…125Ler maisConfigurarPreço (excluindo IVA) a partir de:42.98 €Data de envio regular:9 dias úteis
- Volume Discount
ESCO
【Product Specifications】・Material-Quenched steel(C45)・Screw…M8・A…12・B…18・D…13Ler maisConfigurarPreço (excluindo IVA) a partir de:9.20 €Data de envio regular:9 dias úteis
ESCO
【Product Specifications】・Material-Quenched steel・Screw…M24・D1…25・D…60・H…8Ler maisConfigurarPreço (excluindo IVA) a partir de:11.13 €Data de envio regular:9 dias úteis
ESCO
【Product Specifications】・Material-Quenched steel・T slot…22・Screw…M16・B1…21.5・L…63・H2…15Ler maisConfigurarPreço (excluindo IVA) a partir de:237.06 €Data de envio regular:9 dias úteis
- DESCONTO
AMF
Plain clamp Tempering steel, varnished. The product is available per 1 peace.Ler maisConfigurarPreço (excluindo IVA) a partir de:9.46 €Preço especialData de envio regular:Item em stock: 1 dia útilAlguns artigos podem ser enviados no próprio dia
AMF
6325G Clamps for machine vices, supplied in pairs
Clamps for machine vices Forged design, packaged in pairs. The product is available per 1 peace.Ler maisConfigurarPreço (excluindo IVA) a partir de:27.46 €Data de envio regular:4 dias úteis
AMF
Aluminium screw jack Centring hole dia. 12 mm. Spindle: Tempering steel, blued, Trapezoidal thread, self-locking with end stopbody. Base: Aluminium 400 N/mm2 tensile strength. The product is available per 1 peace.Ler maisConfigurarPreço (excluindo IVA) a partir de:66.34 €Data de envio regular:5 dias úteis
AMF
Ball-pad Steel tempered, burnished. The product is available per 1 peace.Ler maisConfigurarPreço (excluindo IVA) a partir de:14.07 €Data de envio regular:5 dias úteis
AMF
6490 Low height clamping jaws, model Bulle
Low height clamping jaws, model Bulle tempered and burnished. Packing: 2 units in carton, complete with cap screw ISO 4762-10.9, T-nuts DIN 508 and hexagon key ISO 2936. Available in pairs only! The product is available per 1 peace.Ler maisConfigurarPreço (excluindo IVA) a partir de:148.85 €Data de envio regular:5 dias úteis
AMF
Universal step blocks Step increments: vertical 4.65 mm, horizontal 2.3 mm. Tempering steel, varnished. The product is available per 1 peace.Ler maisConfigurarPreço (excluindo IVA) a partir de:7.10 €Data de envio regular:5 dias úteis
AMF
Pressure pad Complete with dowel pin.Stainless steel. The product is available per 1 peace.Ler maisConfigurarPreço (excluindo IVA) a partir de:7.90 €Data de envio regular:5 dias úteis
- DESCONTO
- Volume Discount
GANTER
Flanged connector clamps / Aluminium / GN 145 / 2-with Stainless Steel-clamping screw DIN 912
The clamping bores of GN 145 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.GN 145 flanged connector clamps are also suitable for mounting on profile systems.The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).Ler maisConfigurarPreço (excluindo IVA) a partir de:19.96 €Preço especialData de envio regular:Item em stock: 1 dia útilAlguns artigos podem ser enviados no próprio dia
- Volume Discount
GANTER
Flanged connector clamps / Aluminium / GN 147 / 2-with Stainless Steel-clamping screw DIN 912
The clamping bores of GN 147 flanged connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.The square designs are also suitable for use in profile systems.The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).Ler maisConfigurarPreço (excluindo IVA) a partir de:35.38 €Data de envio regular:7 dias úteis
- Volume Discount
GANTER
Hook type toggle clamps for pulling action
The draw hook of the GN 850 hook type toggle clamps can be adjusted within the stroke.Ler maisConfigurarPreço (excluindo IVA) a partir de:28.70 €Data de envio regular:7 dias úteis
- Volume Discount
GANTER
Linear actuator connectors / Aluminium / GN 165.1 / 2-with 2 Stainless Steel-clamping screws DIN 912
GN 165.1 linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.The square of the linear actuator connector is supplied not machined in the standard design. Together with the tolerance of the tube, this may result in a relatively large play.This can be adjusted in one direction using the clamping screws. In the other direction (90° to it), a defined minimum play can be achieved only by appropriate machining (special design) of the square linear actuator connector.The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).Ler maisConfigurarPreço (excluindo IVA) a partir de:69.50 €Data de envio regular:7 dias úteis
- DESCONTO
- Volume Discount
GANTER
Split hubs GN 150 are distinguished by the method of simple clamping to any shaft.This can be achieved without prior machining of the shaft, eliminating clamping parts and assembly work.A further advantage is the positioning of the lever arm to any required position.The shaft tolerance should be within h11; to transmit higher torques the hub can be supplied with a keyway.Ler maisConfigurarPreço (excluindo IVA) a partir de:15.60 €Preço especialData de envio regular:Item em stock: 1 dia útilAlguns artigos podem ser enviados no próprio dia
AMF
Clamping Module with Detent Function, Mechanical, Screw-In Version, 6214RM-251
Clamping module with detent function, mechanical, screw-in version Mechanical opening. Housing and piston hardened. Repetition accuracy < 0.1 mm.Ler maisConfigurarPreço (excluindo IVA) a partir de:194.58 €Data de envio regular:6 dias úteis
AMF
Cover Caps for Clamping Module, 6206ZS
Cover caps for clamping module Material: PolyethyleneLer maisConfigurarPreço (excluindo IVA) a partir de:13.79 €Data de envio regular:6 dias úteis
AMF
Installation Clamping Module, Screw-In Version, with Hydraulic Opening, 6370EARHX5
Installation clamping module, screw-in version Hydraulic opening. Opening operating pressure: min. 50 bar - max. 60 bar. Cover and piston hardened. Repeatability < 0.005 mm.Ler maisConfigurarPreço (excluindo IVA) a partir de:867.79 €Data de envio regular:6 dias úteis
NORELEM
Slot guide nuts, Form A, single (03240)
· Elements are aligned exactly· Fixtures are positioned with repeat accuracy· Objects are positioned quickly· Fixtures are positioned with repeat accuracy· Objects are positioned quicklyLer maisConfigurarPreço (excluindo IVA) a partir de:23.65 €Data de envio regular:4 dias úteis
NORELEM
· Workpiece clamping with positive down force· Ideal for flat workpieces· Stainless steel parts hardenedLer maisConfigurarPreço (excluindo IVA) a partir de:99.00 €Data de envio regular:4 dias úteis- ConfigurarPreço (excluindo IVA) a partir de:124.04 €Data de envio regular:5 dias úteis
AMF
Heavy screw jack with nickel lock bolt. Centring hole D12 / M10. Spindle: Tempered steel, self-locking acme thread, with final stop. Spindle head burnished. Body: tempered steel, painted.Ler maisConfigurarPreço (excluindo IVA) a partir de:406.16 €Data de envio regular:6 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:1,030.39 €Data de envio regular:5 dias úteis
NABEYA
Chips bite into in the aluminum base, leaving no scratches on the machine table. Lightweight as it is made of aluminum.Ler maisConfigurarPreço (excluindo IVA) a partir de:167.88 €Data de envio regular:8 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:70.53 €Data de envio regular:6 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:317.49 €Data de envio regular:6 dias úteis
NABEYA
[Features]· Bar for Quick Lock.· Annoying thread feeding when clamping is not necessary.· A one-action clamp that adopts a cam lock mechanismLer maisConfigurarPreço (excluindo IVA) a partir de:51.73 €Data de envio regular:8 dias úteisNABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.Ler maisConfigurarPreço (excluindo IVA) a partir de:7.03 €Data de envio regular:8 dias úteis
NABEYA
Clamp Part of Wedge Clamp (for T-Shaped Grooves)
For the T-slot on the clamping part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, clamp stroke 6 mm. The workpiece contact surface is a flat type. The manufacturer also sells the clamp part only.Ler maisConfigurarPreço (excluindo IVA) a partir de:188.28 €Data de envio regular:8 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:307.77 €Data de envio regular:6 dias úteis
NABEYA
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.Ler maisConfigurarPreço (excluindo IVA) a partir de:25.79 €Data de envio regular:6 dias úteis
NABEYA
Swing Clamp Height Adjusting Support
Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.Ler maisConfigurarPreço (excluindo IVA) a partir de:98.09 €Data de envio regular:6 dias úteis
NABEYA
This product can clamp 2 workpieces at the same time. Due to its compact structure (cylinder diameter 10 mm to 30 mm), it can be used in small spaces. The freely rotating structure saves time when loading and unloading the workpieces.Ler maisConfigurarPreço (excluindo IVA) a partir de:81.28 €Data de envio regular:6 dias úteis
NABEYA
Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.Ler maisConfigurarPreço (excluindo IVA) a partir de:300.23 €Data de envio regular:8 dias úteis
NABEYA
It is the base part of the Clamp Unit 7110 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.Ler maisConfigurarPreço (excluindo IVA) a partir de:526.97 €Data de envio regular:8 dias úteis
NABEYA
It will be the base part of the Clamp Unit 7111 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.Ler maisConfigurarPreço (excluindo IVA) a partir de:980.38 €Data de envio regular:8 dias úteis
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.Ler maisConfigurarPreço (excluindo IVA) a partir de:183.15 €Data de envio regular:8 dias úteis
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.Ler maisConfigurarPreço (excluindo IVA) a partir de:317.12 €Data de envio regular:8 dias úteis
