Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!
Jigs for Manual Tightening (página 5)
Hand-tightening jigs are jigs for fixing a workpiece to a table or base jig of a machine tool by hand-tightening. This category includes clamping parts, clamping units and locating elements. Clamping parts are individual parts of jigs for hand tightening of workpieces and include screw jacks, toggle clamps, and T-slot nuts. Clamp units are jigs for fixing workpieces similar to clamping parts, but they are set consisting of various parts. Locating elements are tools and optional parts used for positioning and raising workpieces and supporting workpieces, such as guide blocks and straight pins.
751 itens
* Informações sobre dias de expedição, custos de expedição e preços
NABEYA
A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.Ler maisConfigurarPreço (excluindo IVA) a partir de:202.05 €Data de envio regular:6 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:125.22 €Data de envio regular:6 dias úteis- ConfigurarPreço (excluindo IVA) a partir de:141.88 €Data de envio regular:6 dias úteis
- ConfigurarPreço (excluindo IVA) a partir de:137.89 €Data de envio regular:6 dias úteis
NABEYA
Install it between the pitches of the Q-lock element to prevent deflection and chattering of the jig base.Ler maisConfigurarPreço (excluindo IVA) a partir de:53.00 €Data de envio regular:6 dias úteis
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.Ler maisConfigurarPreço (excluindo IVA) a partir de:83.44 €Data de envio regular:6 dias úteis
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.Ler maisConfigurarPreço (excluindo IVA) a partir de:45.47 €Data de envio regular:6 dias úteis
- Volume Discount
NABEYA
V Block Guide Block【2 unidades】
For installation, use E-660 socket screws (sold separately).Ler maisConfigurarPreço (excluindo IVA) a partir de:32.73 €Data de envio regular:6 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:53.30 €Data de envio regular:6 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:112.24 €Data de envio regular:8 dias úteis
NABEYA
Guide Block (Open Type)【2 unidades】
After setting the fixed object in the given position, place the guide block in the T-groove to position.Ler maisConfigurarPreço (excluindo IVA) a partir de:50.96 €Data de envio regular:6 dias úteis
NABEYA
Guide Block (Stepped Type)【2 unidades】
It is screw-fastened on a fixed object or vise with 20 mm key groove. Can be used in any machine with varied guide block sizes available.Ler maisConfigurarPreço (excluindo IVA) a partir de:100.68 €Data de envio regular:6 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:53.03 €Data de envio regular:8 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:1,357.80 €Data de envio regular:8 dias úteis
NABEYA
Flange Locating Pin (Diamond Pin)
Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)Ler maisConfigurarPreço (excluindo IVA) a partir de:98.24 €Data de envio regular:6 dias úteis
NABEYA
Flange Locating Pin (Diamond Pin S)
Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)Ler maisConfigurarPreço (excluindo IVA) a partir de:115.72 €Data de envio regular:8 dias úteis
NABEYA
Easily supports and clamps unstable workpieces that are measured with a 3D measuring machine: 169 support pins support complex three-dimensional curved surfaces, shortening changeover time. The support pin can be fixed with a single clamp lever, and the clamp position can be freely adjusted vertically and laterally according to the workpiece shape. . Can also be used for long workpieces by using multiple units.Ler maisConfigurarPreço (excluindo IVA) a partir de:949.90 €Data de envio regular:8 dias úteis
NABEYA
Locating Pin A Type (Self Cut Product)
Machine outer diameters A and B according to the tolerance specified by the user. (Self Cut Product)Ler maisConfigurarPreço (excluindo IVA) a partir de:28.28 €Data de envio regular:8 dias úteis
NABEYA
Locating Pin A Type (Finishing Product)
Outer diameters A and B have ground finish (finished product)Ler maisConfigurarPreço (excluindo IVA) a partir de:77.16 €Data de envio regular:8 dias úteis
NABEYA
Locating Pin B Type (Self Cut Product)
Machine outer diameters A and B according to the tolerance specified by the user. (Self Cut Product)Ler maisConfigurarPreço (excluindo IVA) a partir de:44.60 €Data de envio regular:8 dias úteisNABEYA
Locating Pin B Type (Finishing Product)
This product comes with A-type and B-type locating pins with grinding finish.Ler maisConfigurarPreço (excluindo IVA) a partir de:97.21 €Data de envio regular:8 dias úteis
NABEYA
Locating Pin (Adjustable Diameter Pin)
[Features]· A single wrench with the positioning repeatability of 5 μm.· Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.· The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.· Locating adjustable pin creates zero gap.Ler maisConfigurarPreço (excluindo IVA) a partir de:136.73 €Data de envio regular:6 dias úteisNABEYA
Locating Pin (Adjustable Round Pin)
[Features]· A single wrench with the positioning repeatability of 5 μm.· Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.· The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.· Locating adjustable pin creates zero gap.Ler maisConfigurarPreço (excluindo IVA) a partir de:136.73 €Data de envio regular:8 dias úteis
NABEYA
Locating Pin (Inch Finish Round Pin)
Inch finish used for jigs and components in the aviation industry (φA only). In order to improve the efficiency of driving work, the lead part has undergone finishing grinding in 2 stages. The hardness is set low.Ler maisConfigurarPreço (excluindo IVA) a partir de:33.60 €Data de envio regular:6 dias úteis
NABEYA
Compared with chamfering pins, galling is less likely to occur during insertion, making it ideal for use as a positioning pin for robot jigs or workpieces. The 1 mm width around the reference plane enables stable positioning. The reference surface is given a DLC (Diamond-Like Carbon) coating, providing excellent abrasion resistance.Ler maisConfigurarPreço (excluindo IVA) a partir de:72.64 €Data de envio regular:8 dias úteisNABEYA
Locating Pin (Ball DLC Diameter)
Compared with chamfering pins, galling is less likely to occur during insertion, making it ideal for use as a positioning pin for robot jigs or workpieces. The 1 mm width around the reference plane enables stable positioning. The reference surface is given a DLC (Diamond-Like Carbon) coating, providing excellent abrasion resistance.Ler maisConfigurarPreço (excluindo IVA) a partir de:77.82 €Data de envio regular:8 dias úteis
NABEYA
Body: SCM420 / rhombic nut: S45C-D, Hardened HRC56 ±2 locating cylinder (positioning stopper).Ler maisConfigurarPreço (excluindo IVA) a partir de:102.59 €Data de envio regular:10 dias úteis
NABEYA
Socket screw fixing type positioning pin. Can be used repeatedly. Mounting bolts are sold separately. Use socket screws.Ler maisConfigurarPreço (excluindo IVA) a partir de:50.59 €Data de envio regular:8 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:154.49 €Data de envio regular:8 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:592.98 €Data de envio regular:6 dias úteis
NEW STRONG
Screw Support with Magnetic Force
For height adjustment of workpieces. A set of 2 pieces. Materials: EN 1.1191 Equiv. HRC: 35 to 40Ler maisConfigurarPreço (excluindo IVA) a partir de:206.73 €Data de envio regular:12 dias úteis
NEW STRONG
It is very useful for clamping large or tall workpieces.[Features]It is used to support clamps and adjust the height of workpieces.Ler maisConfigurarPreço (excluindo IVA) a partir de:510.76 €Data de envio regular:6 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:46.22 €Data de envio regular:6 dias úteis
- DESCONTO
- Volume Discount
NEW STRONG
[Features] Materials: EN 1.1191 Equiv., hardness: HRC35, black oxide coating, finish.Ler maisConfigurarPreço (excluindo IVA) a partir de:20.32 €Preço especialData de envio regular:Item em stock: 1 dia útilAlguns artigos podem ser enviados no próprio dia
NEW STRONG
[Features] -EN 1.1191 equiv., hardness: HRC35, black oxidised surface.-It can be used with a double cam handle for a wide range of applications.[Features] -As a pressure device for workpieces.-As a clamping device.Ler maisConfigurarPreço (excluindo IVA) a partir de:30.22 €Data de envio regular:6 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:96.03 €Data de envio regular:6 dias úteis
FUJI TOOL
[Features]· Free type with continuously variable fastening ability.· Doesn't turn a hair even at intense vibrations.[Applications]· It is used to press and hold a workpiece or mold from above.Ler maisConfigurarPreço (excluindo IVA) a partir de:171.74 €Data de envio regular:6 dias úteis
NABEYA
[Features]· Adsorption of workpieces is possible by simply supplying air from a compressor.· Supports non-magnetic workpieces such as aluminum, stainless steel, and copper, etc. with which a magnetic chuck cannot be used.· VCM0303E.· Supply valve can only turn the adsorption ON or OFF.· VCM0303S.· Adsorption and air blowing are both possible using the changeover switch.· The current adsorption force can be confirmed by vacuum pressure gauge.· Adsorption force can be adjusted by vacuum regulatorLer maisConfigurarPreço (excluindo IVA) a partir de:2,359.65 €Data de envio regular:8 dias úteis
ConfigurarPreço (excluindo IVA) a partir de:99.98 €Data de envio regular:8 dias úteis![Multi Auto-Clamp, Guide Bar Type [Serial], Standard Type](https://uk.misumi-ec.com/linked/material/fs/NBY1/PHOTO/4mta.jpg)
NABEYA
Multi Auto-Clamp, Guide Bar Type [Serial], Standard Type
Significantly reduces mounting jig changes which accompany workpiece changes, helping to reduce production costs and shorten construction periods.Ler maisConfigurarPreço (excluindo IVA) a partir de:158.65 €Data de envio regular:8 dias úteis![Multi Auto-Clamp, Guide Bar Type [Serial], Return Mechanism Type](https://uk.misumi-ec.com/linked/material/fs/NBY1/PHOTO/5mra.jpg)
NABEYA
Multi Auto-Clamp, Guide Bar Type [Serial], Return Mechanism Type
Significantly reduces mounting jig changes which accompany workpiece changes, helping to reduce production costs and shorten construction periods.Ler maisConfigurarPreço (excluindo IVA) a partir de:209.17 €Data de envio regular:6 dias úteis![Multi Auto-Clamp, Guide Plate Type [Serial], Standard Type](https://uk.misumi-ec.com/linked/material/fs/NBY1/PHOTO/6mtb.jpg)
NABEYA
Multi Auto-Clamp, Guide Plate Type [Serial], Standard Type
Significantly reduces mounting jig changes which accompany workpiece changes, helping to reduce production costs and shorten construction periods.Ler maisConfigurarPreço (excluindo IVA) a partir de:158.53 €Data de envio regular:8 dias úteis![Multi Auto-Clamp, Guide Plate Type [Serial], Return Mechanism Type](https://uk.misumi-ec.com/linked/material/fs/NBY1/PHOTO/7mrb.jpg)
NABEYA
Multi Auto-Clamp, Guide Plate Type [Serial], Return Mechanism Type
Significantly reduces mounting jig changes which accompany workpiece changes, helping to reduce production costs and shorten construction periods.Ler maisConfigurarPreço (excluindo IVA) a partir de:209.11 €Data de envio regular:8 dias úteis![Multi Auto-Clamp, Double Side Type [Branched], Standard Type](https://uk.misumi-ec.com/linked/material/fs/NBY1/PHOTO/8mt.jpg)
NABEYA
Multi Auto-Clamp, Double Side Type [Branched], Standard Type
Significantly reduces mounting jig changes which accompany workpiece changes, helping to reduce production costs and shorten construction periods.Ler maisConfigurarPreço (excluindo IVA) a partir de:158.47 €Data de envio regular:8 dias úteis![Multi Auto-Clamp, Double Side Type [Branched], Return Mechanism Type](https://uk.misumi-ec.com/linked/material/fs/NBY1/PHOTO/9mr.jpg)
NABEYA
Multi Auto-Clamp, Double Side Type [Branched], Return Mechanism Type
Significantly reduces mounting jig changes which accompany workpiece changes, helping to reduce production costs and shorten construction periods.Ler maisConfigurarPreço (excluindo IVA) a partir de:208.69 €Data de envio regular:8 dias úteis
