Screws and Accessories

?* Information on days to ship and prices

• 

  Clamp Pin Type CPA

  NABEYA

  Ideal for thin workpieces. One-touch clamp: just push in the workpiece

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.28 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  T-slot Nut

  NEW STRONG

  -A bolt fixing nut for T-slots.
  -This product does not penetrate bolts so as not to damage the underside of the table T-slot.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.33 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  6332S Quick-action clamping nut without collar

  AMF

  Quick-action clamping nut without collar hardened and zinc-plated, strength class 6. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.27 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  T-Nuts / GN 507 / M4, M5, M6, M8

  GANTER

  T-nuts GN 507 have been specially designed for use on extrusion rails. They are inserted from either end of the T-slot.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  T-Nuts for T-Slots

  GANTER

  T-Nuts GN 505 can be inserted vertically into a T-Slot like rhombus T-Nuts GN 508.1.
  When tightening the clamping bolt, the nut will be forced into a crosswise position by the applied torque and firmly anchored in the T-slot.
  This action is achieved by using T-nut type MB which is intentionally fitted with an overtight fit requiring a higher torque.
  To remove the bolt and T-nut a 90° anticlockwise turn is sufficient to withdraw the two components with the clamped workpiece.
  The clamping face of the T-nut is serrated to ensure that a possible plating coat in the T-slot is penetrated to establish a good electrical contact.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Wedge clamps, Steel

  GANTER

  Clamping with the wedge clamps GN 920.1 is achieved via the socket head cap screw and the clamp wedge which cause both clamping jaws to move outward.
  When loosening the screw, the clamp wedge is returned via an internal return spring which, in turn, loosens the tension.
  Wedge clamps are ideal for multiple clamping operations, but they are also suitable for clamping individual workpieces.
  The long hole in the clamp wedge serves to compensate tolerances in the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	189.92 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Hook Catch for Toggle Hook Clamp 6848

  NABEYA

  Receiving part for Toggle Hook Clamp 6848H, 6848V series. Also sold separately

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  DIN 6331 Collar nut

  AMF

  Collar nut height 1,5 dia. Tempered, tensile strength class 10. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Clamping pads, with male thread, Steel

  GANTER

  Clamping pads GN 709.1 are used as mobile supports or as spring plungers for clamping workpieces. They can also be used as a back stop.
  The ball is limited to an angular movement of 9° only.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  T-Nuts / Stainless Steel / GN 508 / M6, M8, M10, M12, M14, M16

  GANTER

  Stainless Steel-T-Nuts DIN 508 are also available without tapped hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.70 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Toggle clamp spindle assemblies with protective neoprene tip, Stainless Steel

  GANTER

  The hexagon nuts are included.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  508 Nuts for T-slots (T-nuts)

  AMF

  Nuts for T-slots (T-nuts) tempered, strength class 10. The nuts for the T groove can only experience a full load when the screw connection exists over the entire length of the thread.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.75 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Toggle clamp spindle assemblies with protective neoprene tip

  GANTER

  The hexagon nuts are included.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  T-Slot bolts

  GANTER

  [Specifications]
  ・Material: Heat-treatable Steel
  ・Slot flats milled
  ・Standard: DIN 787

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Shaft Clamps, Stainless Steel

  HALDER

  Material

  Body

  • Stainless steel 1.4305
  

  Spring

  • stainless steel
  

  Clamping screw

  • Steel, zinc-plated
  • Stainless Steel
  

  Assembly

  • Expand the clamping jaws to the diameter of the shaft to be clamped.
  • Insert shaft clamp into hole using the  assembly tool.
  • Insert and position the shaft.
  • Clamp using cylinder screw WS (observe tightening torque).
  

  Notes

  The thread d3 serves to hold the assembly tool (optional).

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.46 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Cam clamps, steel with tension lever, Form A (K2049)

  KIPP

  · Compact design
  
  · Quick and easy clamping of components
  
  · Tool-free clamping with tension lever

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stopper Bolt (SSB-B)

  NABEYA

  For positioning the workpiece, or as a stopper, etc. The spherical part has been quenched. Excellent Abrasion Resistance.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Coupling Nut

  NEW STRONG

  S45C / HRC35 / Black-steel-finished type 1 Box of 10 Pieces

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.82 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Shoulder Type Eye Bolt

  NEW STRONG

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.13 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  6330B Hexagon nut

  AMF

  Hexagon nut 1.5 d high, tempered, strength class 10. Can be used for conical sockets DIN 6319D or G. With the flat end, can be used for washers DIN 6340. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DIN 6379 Studs

  AMF

  Studs Rolled thread. M 6-M12 tempered to strength class 10.9, M14-M42 tempered to strength class 8.8.
  The specially developed AMF-studs for clamping purposes are graduated by length according to DIN 323 series R10 figures. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  T-Slot bolts for T-Nuts

  GANTER

  T-Slot bolts GN 505.4 can be inserted vertically into the slot. During tightening, the bolt is forced into the crosswise position and thus anchored in the slot. Conversely, the bolt is turned back during loosening and can then be removed.
  The clamping face of the bolt is serrated to ensure that the eloxal coating is broken up to establish a good electrical contact.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  T-Slot bolts, Stainless Steel

  GANTER

  Stainless Steel-T-Slot bolts GN 505.5 can be inserted vertically into the slot. During tightening, the bolt is forced into the crosswise position and thus anchored in the slot. Conversely, the bolt is turned back during loosening and can then be removed.
  The clamping face of the bolt is serrated to ensure that the eloxal coating is broken up to establish a good electrical contact.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spherical Washer

  MISUMI

  Stable clamping is always attainable without being affected by the parallels of work pieces and bolts, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  U-Washer, 6887

  AMF

  U-washer
  galvanised and passivated.
  For clamping screws 6890.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stopper Bolt (SSB-A)

  NABEYA

  For positioning the workpiece, or as a stopper, etc. The spherical part has been quenched. Excellent Abrasion Resistance.

  Select to compare

  Configure now
  Starting from∗ ：	3.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  T-Slot Long Nut

  NABEYA

  A T-slot nut with 3 tapped holes. It leads to a reduction in the number of parts by integrating

  Select to compare

  Configure now
  Starting from∗ ：	29.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  T-slot Bolt

  NEW STRONG

  For press tool holders. Materials: EN 1.1191 Equiv., forgings, hardness: HRC 30 to 40, finish with black oxide layer.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Spherical Washer

  SUPER TOOL

  [Features]
  · For stability when fixing the clamp with a nut. Combination of a convex spherical surface and concave spherical surface.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Chain Clamp Set

  NABEYA

  [Features]
  · Optimal for circular and eccentric workpieces such as valves and pump cases.
  · Since the clamping force is evenly applied to the workpiece, deflection does not occur in the workpiece and it can be tightened accurately and reliably.
  

  Select to compare

  Configure now
  Starting from∗ ：	3,490.22 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  DIN 787 Bolts for T-slots

  AMF

  Bolts for T-slots Forged, T-slot guid-faces milled, rolled thread, AMF-symbol and strength class punched into head. M 6-M12 tempered to strength class 10.9, M14-M42 tempered to strength class 8.8 The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.19 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  T-Nuts, Extract

  GANTER

  Beyond the scope of the official standard sheet DIN 508, there is also a choice of additional sizes a = 16, 20 and 24 and a selection of various thread sizes d.
  T-Nuts DIN 508 untapped with the tensile strength class 8 (blank) are also available. When ordering the latter the thread size is omitted in part number.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ratchet elements, Form G with external toothing (K1446)

  KIPP

  · Flexible fastening options due to the combination of snap-in elements
  
  · Defined position due to positive connection
  
  · compact design
  
  · Small adjustable angle (9° or 7.5°)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.86 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Sliding clamp for slotted holes, knob black (K1070)

  KIPP

  · Simple and quick fixating using the knobs
  
  · Variable stop element

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	48.21 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Eye Bolt

  NABEYA

  This is a lifting bolt.

  Select to compare

  Configure now
  Starting from∗ ：	4.12 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Spherical washer

  NEW STRONG

  Easy to fix. 1 set of top and bottom. Materials: EN 1.1191 Equiv., hardness: HRC 30 to 35, black oxide finish.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  T Slot Bolt

  SUPER TOOL

  [Features]
  · Special bolt made from precision forged carefully selected carbon steel.

  Select to compare

  Configure now
  Starting from∗ ：	10.78 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Steel] Spring Ejector Pin EA949RM-41

  ESCO

  【Product Specifications】
  ・Material-Body： steel (SCM435)Pin： steel (S45C), Spring： SUS304
  ・-41 to -43： round-tip type, -46 to -48： flat-tip type
  ・Use this tool for removing a workpiece or as a simplified shock absorber.
  ・The pin is fastened with a hexagonal nut and glue.
  ・A…M8
  ・B…7.6
  ・C…44
  ・D…9
  ・K…8

  Select to compare

  Configure now
  Starting from∗ ：	22.47 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  DIN 787 Bolts for T-slots with hexagon nut DIN 6330B and washer DIN 6340

  AMF

  Bolts for T-slots complete with hexagon nut DIN 6330B and washer DIN 6340.
  Forged, milled T-groove, rolled thread, stamped with AMF logo and strength class. M6 to M12 hardened to strength class 10.9, M14 to M42 hardened to strength class 8.8. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping Pads / GN 709.7 / with Female Threads / B, K, R

  GANTER

  Clampimg pads GN 709.7 are also used in jig and fixture construction, for example for clamping workpieces, as movable bearing surface or as stop. The swivel-mounted ball compensates uneven and non-parallel contact surfaces by as much as 10°. It is also secured against further twisting.
  The O-ring holds the ball in position and prevents dirt from penetrating, resulting in a long service life and constant mobility.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.82 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Rhombus T-Nuts

  GANTER

  Rhombus T-Nuts GN 508.1 can be inserted vertically into the T-Slot.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ratchet elements, Form A with internal toothing (K1446)

  KIPP

  · Flexible fastening options due to the combination of snap-in elements
  
  · Defined position due to positive connection
  
  · compact design
  
  · Small adjustable angle (9° or 7.5°)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.86 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  T-slot bolts DIN 787, 12.9 (07040)

  NORELEM

  · Rapid assembly for slot dimensions of 6 mm to 42 mm
  
  · Rolled thread (increased strength)

  Select to compare

  Configure now
  Starting from∗ ：	9.98 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  UNILOCK 5-axis basic module system size 50 mm (K1117)

  KIPP

  · Zero point clamping system
  
  · Ideal for clamping small workpieces
  
  · Manual actuation
  
  · 5-side machining without interfering edges
  
  · Combinable with system size 80

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	615.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Turnbuckles, steel, for chain clamp sets (K1656)

  KIPP

  · Optimal application of the preload
  
  · Acts against any stretching of the chain

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	167.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...