Data Measurement Equipment（Page 4）

?* Information on days to ship and prices

• 

  SMPR, Measuring Insert with Anti-Twist Measure

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	16.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  PR786 Pneumatic indexing for PR780

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	857.14 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Inductive probe Millimar P1300 MB

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	394.29 €
  Min. Shipping Days ：	31 Days

  *Unit price with basic configuration

• 

  Inductive probe Millimar 1318

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	980.57 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  RS232 f RS232 f Transmitter for FM 2

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	774.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  SMPR, Measuring Tip with Ball

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	9.71 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  16 EWe 16 EWe Transmitter for e-Stick

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	441.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  SMPR, Block Measuring Element

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	442.29 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swivel Plate

  MITUTOYO

  For the mounting of brackets or columns in any angle in the plane or in the room

  Select to compare

  Configure now
  Starting from∗ ：	115.79 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Vise

  MITUTOYO

  Spring clamps, vices, etc.

  Select to compare

  Configure now
  Starting from∗ ：	362.37 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  USB Input Tool Direct (Digimatic USB Cable)

  MITUTOYO

  A Mitutoyo USB Input Tool SPC data cable with data pushbutton connector (A) to suit compatible measuring tools.

  Select to compare

  Configure now
  Starting from∗ ：	124.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  USB I/F Unit for EJ Counter

  MITUTOYO

  The EJ-Counter is targeted at secondary and automatic embedded markets as well as conventional measurement rooms.Multipoint measuring systems with a maximum of 16 gauges can be configured. The EJ-Counter is attached to a DIN rail for use. Due to the small size of the unit, it can be installed inside of switchboards /equipment. When using multiple EJ Counters linked together, connection of power to one EJ Counter also supplies power to the other linked counters.In addition, through the industrial I/F unit (sold separately), data can be managed on the upper side, and it is possible to support smart factories such as IoT and M2M.Easy setup with the LG QuickSetup Tool software (free of charge) (USB interface is required).

  Select to compare

  Configure now
  Starting from∗ ：	470.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp, Slidable Clamping Position

  MITUTOYO

  Toggle clamp with slidable adjustment of the clamping position.

  Select to compare

  Configure now
  Starting from∗ ：	93.55 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Tip Stylus M2 Hardened Steel

  MITUTOYO

  Tip styli are required when detecting threaded or scribed features or specific shapes.

  Select to compare

  Configure now
  Starting from∗ ：	26.32 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus, Eccentric Type

  MITUTOYO

  Stylus, Eccentric Type

  Select to compare

  Configure now
  Starting from∗ ：	614.61 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus M4 Ruby Ball, Ceramic Stem

  MITUTOYO

  Straight styli are used to detect easily reachable features on the measured surface.

  Select to compare

  Configure now
  Starting from∗ ：	78.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus M4 Ruby Ball, Carbide Stem

  MITUTOYO

  Straight styli are used to detect easily reachable features on the measured surface.

  Select to compare

  Configure now
  Starting from∗ ：	76.97 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus M4 Carbide Ball DB, Stainless Steel Stem

  MITUTOYO

  Straight styli are used to detect easily reachable features on the measured surface.

  Select to compare

  Configure now
  Starting from∗ ：	144.47 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Stylus M3 Zirconium Oxide, Carbide Stem

  MITUTOYO

  Straight styli are used to detect easily reachable features on the measured surface.

  Select to compare

  Configure now
  Starting from∗ ：	111.32 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus M3 Silicon Nitride Ball, Carbon Fiber Stem

  MITUTOYO

  Straight styli are used to detect easily reachable features on the measured surface.

  Select to compare

  Configure now
  Starting from∗ ：	121.05 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus M3 Ruby Ball, Ceramic Stem

  MITUTOYO

  Straight styli are used to detect easily reachable features on the measured surface. Ruby, as the hardest of all stylus tip materials, is the perfect choice for most applications. Bend-resistant styli stems made of tungsten carbide are ideal for virtually all standard applications in the measuring lab with its high rigidity properties. Because of the adhesive material build up, the scanning of aluminium surfaces with ruby tips is not recommended.

  Select to compare

  Configure now
  Starting from∗ ：	56.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus M3 Ruby Ball, Carbide Stem

  MITUTOYO

  Straight styli are used to detect easily reachable features on the measured surface. Ruby, as the hardest of all stylus tip materials, is the perfect choice for most applications. Bend-resistant styli stems made of tungsten carbide are ideal for virtually all standard applications in the measuring lab with its high rigidity properties. Because of the adhesive material build up, the scanning of aluminium surfaces with ruby tips is not recommended.

  Select to compare

  Configure now
  Starting from∗ ：	43.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus M2 Ruby Ball, Carbon Fiber Stem

  MITUTOYO

  Straight styli are used to detect easily reachable features on the measured surface. Because of the specific surface properties of contact points made of zirconium oxide - a ceramic compound with high wear resistance – they are acknowledged as the best choice for aggressive scanning of abrasive surfaces, such as workpieces made of cast iron. Zirconium oxide provides a smooth and frictionless sliding performance on rough surfaces. Bend-resistant styli stems made of tungsten carbide are ideal for virtually all standard applications in the measuring lab with its high rigidity properties.

  Select to compare

  Configure now
  Starting from∗ ：	90.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Machine Tool Stylus M4 Ruby Ball, Stainless Steel Stem

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	41.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus M2 Diamond Coated Ball

  MITUTOYO

  The properties of diamond coated styli are outstanding. While ruby and most other commonly used styli ball materials are exposed to and suffer from abrasive or adhesive wear, diamond coated balls offer advantage over all these styli ball materials. They will outlast ruby balls in everyday use and therefore pay off as a long term investment. Additionally they are not subject to the adhesion of material particles when scanning for e.g. aluminium components. When it comes to measure modern wear resistant coatings with a high surface hardness, diamond coated styli are essential to the success of the measurement, as ruby ball styli can already suffer massive wear in the first measurement cycle.

  Select to compare

  Configure now
  Starting from∗ ：	579.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stem for Series 513, D= 4mm

  MITUTOYO

  for Ø 4 mm

  Select to compare

  Configure now
  Starting from∗ ：	11.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stem for Pocket Type Series 513

  MITUTOYO

  for Ø 4 mm

  Select to compare

  Configure now
  Starting from∗ ：	11.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Staking Bushing Ø10mm Multiflex

  MITUTOYO

  For the fixed positioning of slider components

  Select to compare

  Configure now
  Starting from∗ ：	7.11 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Machine Tool Stylus M4 Ruby Ball, Ceramic Stem

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	96.04 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Spring-loaded Cone Support

  MITUTOYO

  For interfacing workpiece and fixturing jig, a wide selection of stopper and positioning components is available.

  Select to compare

  Configure now
  Starting from∗ ：	84.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Sphere Bolt

  MITUTOYO

  Ballscrew for manual eco-fix loading system Connecting thread

  Select to compare

  Configure now
  Starting from∗ ：	37.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Special Base Plate

  MITUTOYO

  Fixturing base plate designed for direct mounting on the granite table of CRYSTA-Apex . The base plate provides multiple possibilities for fixing fixtures and direct construction of jigs on the CMM. It is equipped with fixing threads M6 in a 25mm / 50mm grid to directly position and build up fixtures. The base plate is designed to perfectly match the Mitutoyo eco-fix clamping system and also for fixing aids such as chucks, positioning angles or the like. In addition, threads M8 are used to attach CMM accessories such as Measuring balls or stylus rack which are located in the edge area on the base plates. Besides the wide area base for fixturing, it also protects the valuable granite base of the CMM. Precision machined from a high quality aluminum alloy and provided with a surface finish that makes the base plates extremely durable. 1 Segment.

  Select to compare

  Configure now
  Starting from∗ ：	1,100.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spanner for Standard Type Series 513

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	6.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spacer Multiflex-profile

  MITUTOYO

  T-slot distance piece Incl. nut and screw

  Select to compare

  Configure now
  Starting from∗ ：	17.37 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Sliding Block M6 Multiflex

  MITUTOYO

  T-slot nut with M6 connection

  Select to compare

  Configure now
  Starting from∗ ：	7.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Multiflex-profile

  MITUTOYO

  The multiflexprofile series from Mitutoyo combines in one profile the advantages of three different kinds of profiles for modular fixture construction. Dovetail profile Flexible repositioning with slider elements for rapid and cost effective changes of fixture points. Grid profile Benefit from a fixed 50mm positioning grid for the reproducible addition of features. T-nut profile Additions can de added and freely positioned in the t-nut profile Can be combined with all kinds of profiles and add-on parts, even from third parties. multiflexprofile are compatible with the Mitutoyo multiflexprofile frames and are ideal for combining with the vari-fix clamping columns.

  Select to compare

  Configure now
  Starting from∗ ：	77.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Location Pin

  MITUTOYO

  eco-fix location pin, For the adjustment of the required height level of the fixture.

  Select to compare

  Configure now
  Starting from∗ ：	16.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Headless Screw

  MITUTOYO

  For the connection of threaded components

  Select to compare

  Configure now
  Starting from∗ ：	5.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flat Top Insert

  MITUTOYO

  Flat top insert for direct workpiece support.

  Select to compare

  Configure now
  Starting from∗ ：	13.03 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fastening Element for Toggle Clamps

  MITUTOYO

  Fastening element for connecting the toggle clamps and receiving prisms.

  Select to compare

  Configure now
  Starting from∗ ：	56.84 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Extension Set Clamping Components

  MITUTOYO

  Spring clip extension set. Easily clamp the components by spring force.

  Select to compare

  Configure now
  Starting from∗ ：	358.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  EJ-Counter -102N

  MITUTOYO

  The EJ-Counter is targeted at secondary and automatic embedded markets as well as conventional measurement rooms.Multipoint measuring systems with a maximum of 16 gauges can be configured. The EJ-Counter is attached to a DIN rail for use. Due to the small size of the unit, it can be installed inside of switchboards /equipment. When using multiple EJ Counters linked together, connection of power to one EJ Counter also supplies power to the other linked counters.In addition, through the industrial I/F unit (sold separately), data can be managed on the upper side, and it is possible to support smart factories such as IoT and M2M.Easy setup with the LG QuickSetup Tool software (free of charge) (USB interface is required).

  Select to compare

  Configure now
  Starting from∗ ：	630.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  EJ Counter - 102NE

  MITUTOYO

  The EJ-Counter is targeted at secondary and automatic embedded markets as well as conventional measurement rooms.Multipoint measuring systems with a maximum of 16 gauges can be configured. The EJ-Counter is attached to a DIN rail for use. Due to the small size of the unit, it can be installed inside of switchboards /equipment. When using multiple EJ Counters linked together, connection of power to one EJ Counter also supplies power to the other linked counters.In addition, through the industrial I/F unit (sold separately), data can be managed on the upper side, and it is possible to support smart factories such as IoT and M2M.Easy setup with the LG QuickSetup Tool software (free of charge) (USB interface is required).

  Select to compare

  Configure now
  Starting from∗ ：	630.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Extension M3, Stainless Steel L = 30 mm.

  MITUTOYO

  Extensions are required when the measurement location cannot be accessed with the stylus alone, for e.g. to reach features in bores and hard to access areas on the workpiece. Stainless steel is the primary material of choice for high-strength precision styli and extensions if weight can be disregarded.

  Select to compare

  Configure now
  Starting from∗ ：	25.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Eco-plus Multiflex Combi Kit, 258 Pieces

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	5,868.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...