Wheels with Shafts（Page 3）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Flap Wheel
DREMEL
[Features]
-Sanding and polishing flat and curved surfaces
-Bendable metal, rigid wood, chipboard, plastic, rubber, etc.- Volume Discount
Configure nowStarting from∗ ： 20.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Configure nowStarting from∗ ： 12.71 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Polygon Band Mini
ICHIGUCHI
[Features]
● Very fast since the micro flap works on a line and the polygon band mini works on a surface.
● Post-use dust is surprisingly minimal compared to micro flaps, and can easily remove small whiskers and burrs from small holes.
● Easily performs hairline finishing on iron, aluminum and stainless steel.- Volume Discount
Configure nowStarting from∗ ： 5.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Polygon Band Mini Drum【5 Pieces Per Package】
ICHIGUCHI
Very fast since the micro flap works on a line and the polygon band mini works on a surface. Work time is 1/5. Post-use dust is surprisingly minimal compared to micro flaps. Disposal weight is 1/5. Whisker-like burrs are removed easily from small holes. Easily performs hairline finishing on iron, aluminum and stainless steel.- Volume Discount
Configure nowStarting from∗ ： 59.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Polygon Band A【10 Pieces Per Package】
ICHIGUCHI
Workpiece is regarded as a plane, not as a point, thus dramatically increasing work efficiency (approx. three times greater efficiency). Shape of blade results in effective air cooling, with workpiece retaining minimal heat. Attaching the dedicated drum makes it possible to change to the required granularity with a single action. Industrial waste volume is 1/3, to be environmentally friendly. Hairline finishing is easy and neat. This product has a soft touch and does not carve deep.- Volume Discount
Configure nowStarting from∗ ： 47.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Polygon Band Z【10 Pieces Per Package】
ICHIGUCHI
Gripping the entire workpiece rather than just at a single point greatly increases work efficiency (by approximately 3 times). A multi-vane design that uses an air-cooling effect to reduce heat build-up on the workpiece. Equipped with a dedicated drum, allowing single-action conversion to the required grit size. Environmentally-friendly product producing 1/3 of the weight of industrial waste. Easy and clean hair-line finishing. Soft-touch operation prevents deep boring.- Volume Discount
Configure nowStarting from∗ ： 50.05 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Polygon Band Dedicated Drum【5 Pieces Per Package】
ICHIGUCHI
Gripping the entire workpiece rather than just at a single point greatly increases work efficiency (by approximately 3 times). A multi-vane design that uses an air-cooling effect to reduce heat build-up on the workpiece. Equipped with a dedicated drum, allowing single-action conversion to the required grit size. Environmentally-friendly product producing 1/3 of the weight of industrial waste. Easy and clean hair-line finishing. Soft-touch operation prevents deep boring.- Volume Discount
Configure nowStarting from∗ ： 52.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mega Bright Flap Wheel【50 Pieces Per Package】
ICHIGUCHI
Uses a polishing cloth with alumina abrasive.
Worn abrasive material is promptly ejected, enabling stable polishing.- Volume Discount
Configure nowStarting from∗ ： 224.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Polygon Band, Free Trial Kit【10 Pieces Per Package】
ICHIGUCHI
Workpiece is regarded as a plane, not as a point, thus dramatically increasing work efficiency (approx. three times greater efficiency).
Shape of blade results in effective air cooling, with workpiece retaining minimal heat.
Attaching the dedicated drum makes it possible to change to the required granularity with a single action.- Volume Discount
Configure nowStarting from∗ ： 52.18 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Super Diamond Band Set
ICHIGUCHI
The tube-shaped diamond cutting edge is used with the dedicated rubber holder. Touch is also smooth.- Volume Discount
Configure nowStarting from∗ ： 108.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Router Felt Buff with Handle F3615【5 Pieces Per Package】
NIHON SEIMITSU KIKAI KOSAKU
The wheel for aluminum oxide polishing is ideal for cleaning, deburring, rust removal, and grinding applications with almost all metals, including stainless steel. Use of abrasives is recommended for polishing and glazing.- Volume Discount
Configure nowStarting from∗ ： 40.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Ultra Grind Flap Wheel (Diagonal Type, Shaft Diameter: 6 mm)【5 Pieces Per Package】
TRUSCO NAKAYAMA
- Volume Discount
Configure nowStarting from∗ ： 61.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cushion Sander
MINITOR
[Features]
· Provides a soft touch and fits well to the machined material, enabling work on both flat and curved surfaces.
· Little heat generated during grinding so the work material is not scorched.
· Layer Type
[Applications]
· Applicable Materials: Tool Steel, Alloy Steel, Resin, Rubber, General Steel, Stainless Steel, Aluminum, Copper- Volume Discount
Configure nowStarting from∗ ： 35.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Felt Buff Shaft Diameter 2.34 mm
MINITOR
[Features]
· A high-quality, smooth buff made of wool compressed to high density.
· Excellent abrasive retention force enables effective polishing.
[Applications]
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet, General Steel, Stainless Steel, Aluminum, Copper- Volume Discount
Configure nowStarting from∗ ： 54.60 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
FR Wrap
MINITOR
[Features]
· A brand new buff made of special resin foam.
· Buff with both the abrasive sustaining power of a felt buff and shape-holding performance similar to lapping wood.
[Applications]
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet, General Steel, Stainless Steel- Volume Discount
Configure nowStarting from∗ ： 30.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Yellow Felt Buff
MINITOR
[Features]
· The soft type felt has been impregnated with abrasive (alumina oxide) for finishing.
· The abrasive undergoes minimal change due to heat and does not easily adhere due to seizure.
[Applications]
· Applicable Materials: Tool Steel, Alloy Steel, Resin, Rubber, General Steel, Stainless Steel, Aluminum, Copper- Volume Discount
Configure nowStarting from∗ ： 91.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Laminated Buff, Applications: Polishing
MINITOR
[Features]
· Buffs with different characteristics are available depending on the polishing objective.
· It is perfect for finish polishing because the soft contact causes almost no damage to the work.
[Applications]
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Resin, Rubber, Cemented Carbide, Cermet, General Steel, Stainless Steel, Aluminum, Copper- Volume Discount
Configure nowStarting from∗ ： 65.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Clean Felt Buff
MINITOR
[Features]
· The soft type felt buff has been impregnated with abrasive (chromium oxide) for finishing.
· Immediate polishing is possible without abrasive application.
[Applications]
· Applicable Materials: Tool Steel, Alloy Steel, General Steel, Stainless Steel, Aluminum, Copper- Volume Discount
Configure nowStarting from∗ ： 37.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Polishing Wood
MINITOR
[Features]
· Minimal abrasive absorption; abrasive grains are suitably retained on the surface to enable optimal slurry polishing.
· Stable polishing is possible with little change in the shape.
· Shape: Cylinder
[Applications]
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet- Volume Discount
Configure nowStarting from∗ ： 93.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sponge Sander (With Polishing Grain)
NAKANISHI
[Features]
· A powerful fiber sander made from polyester abrasive non-woven fabric.
· Numerous pores almost completely prevent clogging and minimize heat generation on the machined surface.- Volume Discount
Configure nowStarting from∗ ： 48.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Polishing Sander Assorted Set (No. 48891 to No. 48897)
NAKANISHI
[Features]
· Sander set for finishing made by impregnating nylon non-woven fabric with abrasive grains.
· Highly-elastic and enables smooth, uniform polishing without creating secondary burrs.- Volume Discount
Configure nowStarting from∗ ： 50.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flap Sander
NAKANISHI
[Features]
· Powerful sander with radially layered polishing cloth.
· The polishing cloth is spread by the rotational centrifugal force and is ideal for polishing the inner surfaces of cylinders.- Volume Discount
Configure nowStarting from∗ ： 64.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cartridge Cap Sander
NAKANISHI
[Features]
· Cylindrical polishing cloth that enables soft polishing.
· Replaceable.- Volume Discount
Configure nowStarting from∗ ： 64.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sisal Hemp Bob
NAKANISHI
[Features]
· Hard bob stitched together with layered bob material.
· Appropriate for pre-polishing of stainless steel, aluminum, copper alloy, etc. Use together with an abrasive.
[Applications]
· For used together with abrasives for pre-polishing of stainless steel, aluminum, copper alloy, etc.- Volume Discount
Configure nowStarting from∗ ： 65.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Wheel Type Felt Bob
NAKANISHI
[Features]
· High quality felt bob that works well with abrasives.- Volume Discount
Configure nowStarting from∗ ： 19.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Laminated Buff, Maximum Operating Rotational Speed (Rpm): 11000
NAKANISHI
[Features]
· Soft bob that enables for soft-touch finishing of metals, plastics, etc.- Volume Discount
Configure nowStarting from∗ ： 94.07 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chamois Bob
NAKANISHI
[Features]
· Soft bob that enables for soft-touch finishing of metals, plastics, etc.- Volume Discount
Configure nowStarting from∗ ： 68.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cloth Bob
NAKANISHI
[Features]
· Soft bob that enables for soft-touch finishing of metals, plastics, etc.- Volume Discount
Configure nowStarting from∗ ： 63.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pointed Pad (Shaft Diameter 6 mm), Pointed Cap, Cap S Type
OFFICE MINE
[Features]
· The cap (abrasive) can be changed with a single action.
[Applications]
· For grinding internal rounded sections of molded products such as aluminum wheels.
· For deburring metal parts, etc.- Volume Discount
Configure nowStarting from∗ ： 79.93 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pointed Pad (Shaft Diameter 6 mm), Pointed Cap, Pad
OFFICE MINE
[Features]
· The cap (abrasive) can be changed with a single action.
· Sponge pad fits well to workpiece bumps.
[Applications]
· For grinding internal rounded sections of molded products such as aluminum wheels.
· For deburring metal parts, etc.- Volume Discount
Configure nowStarting from∗ ： 89.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cartridge Sander
NAKANISHI
[Features]
· Cylindrical polishing cloth that enables soft polishing.
· Replaceable.- Volume Discount
Configure nowStarting from∗ ： 51.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Polygon Band A / Z【10 Pieces Per Package】
ICHIGUCHI
[Features]
· The multi-blade shape creates a cooling effect that reduces heat accumulation in the workpiece. Equipped with a dedicated drum that enables single-action replacement with the required particle size.
· Product has less environmental impact, with 1/3 industrial waste.
[Applications]
· Grinding/polishing of iron and stainless steel
· Pipe inner surface polishing
· Rounding edges and hole circumferences
· Deburring small burrs, removing rust- Volume Discount
Configure nowStarting from∗ ： 46.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Slit Polishing Wheel Hand Type
ICHIGUCHI
[Features]
· The wound paper flexibly forms to the workpiece, easily removing burrs from molded workpieces.
[Applications]
· Deburring after punch press or laser machining
· Scratch elimination on sheet metal and wood workpiece
· Rust removal and small scratch removal- Volume Discount
Configure nowStarting from∗ ： 69.95 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Blade Wheel
ICHIGUCHI
[Features]
· Uses ultra-strong and supple material, sintering special nylon non-woven fabric with an abrasive. Optimal for work that only cleans the surface without engraving the substrate.
[Applications]
· Removing stubborn rust
· Cleaning metal surface
· Removal of adhered substance or paint- Volume Discount
Configure nowStarting from∗ ： 13.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Super Diamond Flap
ICHIGUCHI
[Features]
· Diamond sheets are formed into a flap wheel.
· Provides gentle contact unavailable in conventional diamond grinding stones.
· Also, the air cooling effect operates to enable dry use.
[Applications]
· Grinding and polishing ceramics, carbide, stone and difficult-to-cut material- Volume Discount
Configure nowStarting from∗ ： 44.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Blade Wheel With Hole
ICHIGUCHI
[Features]
· Attach directly to a tabletop grinder, or equip onto a separately sold dedicated arbor and attach to a 6-chuck grinder to use.
· The bird-nest structure demonstrates the air cooling effect, suppressing burn.
[Applications]
· Removing stubborn rust
· Cleaning metal surface
· Removal of adhered substance or paint- Volume Discount
Configure nowStarting from∗ ： 6.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Buff with Shaft Assorted Kit
YANASE
[Features]
· An assorted kit is available for first-time users and those who want to use it for various applications.- Volume Discount
Configure nowStarting from∗ ： 104.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flexible Shaft 1
YANASE
[Features]
· Collet chuck type, for φ3/φ6.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.- Volume Discount
Configure nowStarting from∗ ： 181.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flexible Shaft 2
YANASE
[Features]
· A drill chuck type that can be used with up to φ8.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.- Volume Discount
Configure nowStarting from∗ ： 88.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flap Wheels with Shaft
YANASE
[Features]
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.- Volume Discount
Configure nowStarting from∗ ： 7.47 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Felt Wheel with Shaft (Impregnated) Cylinder Type
YANASE
[Features]
· Can be used without applying polishing agent to the alumina oxide permeated felt buff.
· Apply abrasives to produce further gloss.- Volume Discount
Configure nowStarting from∗ ： 12.29 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
BS Nejitaru Flap Wheel (Hexagonal Shaft)
ICHIGUCHI
[Features]
· Smoothly polishes workpieces with the polishing properties of sandpaper and suitable elasticity.
· Uses Japan-made abrasive materials and shafts.
[Applications]
· For polishing stainless steel and metal, removing rust and paint, and for woodwork.- Volume Discount
Configure nowStarting from∗ ： 5.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 15.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
BS Nejitaru Delight Wheel (Hexagonal Shaft)
ICHIGUCHI
[Features]
· Abrasive grains are embedded in the special fibers to enable simple glazing.
[Applications]
· For polishing stainless steel and metal, cleaning, and woodwork.- Volume Discount
Configure nowStarting from∗ ： 12.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
BS Nejitaru Scolight Wheel (Hexagonal Shaft)
ICHIGUCHI
[Features]
· The power of the fiber results in mild work with no jams.
· Material is highly resistant to shaving.
[Applications]
· For polishing stainless steel and metal, removing dirt, and for woodwork.- Volume Discount
Configure nowStarting from∗ ： 10.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Application |
| Type |
| Material |
| Outer Diameter(mm) |
| Width(mm) |
| Shaft Diameter(mm) |
| Particle Size(#) |
| Stationary Diameter(mm) |
| Screw Hole Diameter(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | DREMEL | H & H | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | NIHON SEIMITSU KIKAI KOSAKU | TRUSCO NAKAYAMA | MINITOR | MINITOR | MINITOR | MINITOR | MINITOR | MINITOR | MINITOR | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | NAKANISHI | OFFICE MINE | OFFICE MINE | NAKANISHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | YANASE | YANASE | YANASE | YANASE | YANASE | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI |
| Product Series | Ultra Grind Flap Wheel (Diagonal Type, Shaft Diameter: 6 mm)【5 Pieces Per Package】 | Laminated Buff, Maximum Operating Rotational Speed (Rpm): 11000 | |||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 20.67 € *Unit price with basic configuration Volume Discount | 12.71 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 5.62 € *Unit price with basic configuration Volume Discount | 59.74 € *Unit price with basic configuration Volume Discount | 47.15 € *Unit price with basic configuration Volume Discount | 50.05 € *Unit price with basic configuration Volume Discount | 52.16 € *Unit price with basic configuration Volume Discount | 224.44 € *Unit price with basic configuration Volume Discount | 52.18 € *Unit price with basic configuration Volume Discount | 108.98 € *Unit price with basic configuration Volume Discount | 40.96 € *Unit price with basic configuration Volume Discount | 61.30 € *Unit price with basic configuration Volume Discount | 35.33 € *Unit price with basic configuration Volume Discount | 54.60 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 30.27 € *Unit price with basic configuration Volume Discount | 91.69 € *Unit price with basic configuration Volume Discount | 65.27 € *Unit price with basic configuration Volume Discount | 37.74 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 93.28 € *Unit price with basic configuration Volume Discount | 48.88 € *Unit price with basic configuration Volume Discount | 50.84 € *Unit price with basic configuration Volume Discount | 64.83 € *Unit price with basic configuration Volume Discount | 64.50 € *Unit price with basic configuration Volume Discount | 65.81 € *Unit price with basic configuration Volume Discount | 19.47 € *Unit price with basic configuration Volume Discount | 94.07 € *Unit price with basic configuration Volume Discount | 68.92 € *Unit price with basic configuration Volume Discount | 63.63 € *Unit price with basic configuration Volume Discount | 79.93 € *Unit price with basic configuration Volume Discount | 89.20 € *Unit price with basic configuration Volume Discount | 51.84 € *Unit price with basic configuration Volume Discount | 46.09 € *Unit price with basic configuration Volume Discount | 69.95 € *Unit price with basic configuration Volume Discount | 13.80 € *Unit price with basic configuration Volume Discount | 44.77 € *Unit price with basic configuration Volume Discount | 6.38 € *Unit price with basic configuration Volume Discount | 104.20 € *Unit price with basic configuration Volume Discount | 181.38 € *Unit price with basic configuration Volume Discount | 88.36 € *Unit price with basic configuration Volume Discount | 7.47 € *Unit price with basic configuration Volume Discount | 12.29 € *Unit price with basic configuration Volume Discount | 5.90 € *Unit price with basic configuration Volume Discount | 15.67 € *Unit price with basic configuration Volume Discount | 12.92 € *Unit price with basic configuration Volume Discount | 10.57 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | Same day | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 6 Days | 8 Days | 5 Days | 5 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Application | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | - | - | - | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing |
| Type | - | - | Flap with shaft | Drum | Band | Band | Drum | - | - | - | Flap with shaft | Flap with shaft | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Drum | Drum | - | Band | - | - | Flap with shaft | - | Paper | - | - | Flap with shaft | Drum | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft |
| Material | - | - | - | - | - | - | - | - | - | - | Buff | - | - | Buff | Buff | Felt | Buff | Felt | - | - | - | - | - | Buff | Buff | Buff | Buff | Buff | - | - | - | - | - | - | - | - | - | - | - | - | Felt | - | - | - | - |
| Outer Diameter(mm) | - | - | - | 8 ～ 12 | - | - | 20 ～ 45 | - | - | - | 15 | 25 ～ 80 | 10 ～ 30 | 4 ～ 25 | 4 ～ 10 | 13 ～ 15 | 14 ～ 28 | 6 ～ 25 | 6 ～ 10 | 10 ～ 30 | - | 10 ～ 25 | 7 | 25 ～ 30 | 22 ～ 25 | 15 ～ 21 | 23 | 23 | - | 7 ～ 14 | 5 ～ 12 | 20 ～ 45 | - | 50 | 15 ～ 50 | 50 ～ 100 | - | - | - | 10 ～ 125 | 10 | 30 ～ 50 | 50 | 30 ～ 50 | 30 ～ 50 |
| Width(mm) | - | - | 20 | 20 | 25 ～ 30 | 25 ～ 30 | 25 ～ 30 | - | - | 10 ～ 20 | 25 | 25 | 8 ～ 13 | 4 ～ 25 | 13 ～ 18 | 25 | 3.5 ～ 16 | 10 ～ 30 | 15 ～ 20 | 10 | - | 5 ～ 20 | 12 | 5 ～ 21 | 2 ～ 5 | 8 ～ 12 | 8 | 7 | 30 | 12 ～ 20 | 13 ～ 20 | 25 ～ 30 | 150 | 13 ～ 26 | 10 ～ 20 | 13 | - | - | - | 10 ～ 30 | - | 25 | 40 | 25 | 25 |
| Shaft Diameter(mm) | 3.2 | - | - | 6 | - | - | 6 | - | - | - | 3 | 6 | 3 | 2.34 | 3 | 3 | 2.34 ～ 3 | 2.34 ～ 6 | 3 | 3 | 3 | 3 | - | 3 ～ 6 | 1.3 ～ 3 | 2.34 ～ 3 | 3 | 2.34 ～ 3 | - | 6 | - | - | 10 | 6 | 6 | 6 ～ 13 | 6 | - | - | 3 ～ 6 | 3 | 6.3 | 6.3 | 6.3 | 6.3 |
| Particle Size(#) | 80 ～ 120 | - | 60 ～ 400 | - | 60 ～ 120 | 40 ～ 80 | - | 40 | - | 100/240/400/800/1500/3000 | - | 40 ～ 60 | 180 ～ 400 | - | - | - | 100 ～ 240 | - | Hard ～ Super hard | 120 ～ 600 | - | 60 ～ 600 | 150 | - | - | - | - | - | 60 ～ 400 | - | 80 ～ 600 | 100 ～ 240 | 180 | 36 | 180 ～ 400 | 36 | - | - | - | 40 ～ 600 | - | 60 ～ 120 | 60 ～ 120 | 400 ～ 1000 | 180 ～ 320 |
| Stationary Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Hole Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Application
-
Type
-
Material
-
Outer Diameter(mm)
-
Width(mm)
-
Shaft Diameter(mm)
-
Particle Size(#)
- 10,000
- 36
- 40
- 60
- 80
- 80、120、220
- 100
- 100/240/400/800/1500/3000
- 120
- 150
- 180
- 200
- 240
- 240 equivalent
- 320
- 400
- 600
- 800
- 1000
- 1500
- 3000
- Hard
- Soft
- Super hard
-
Stationary Diameter(mm)
-
Screw Hole Diameter(mm)
Brand
CAD data type
-
- 2D
- 3D
Categories related to Wheels with Shafts
-
- DIA/CBN Grinding Stones
- Grinding Stones for Flat Surfaces
- Grinding Stone Dressers
- Offset/Flexible Grinding Stones
- Disks
- Sheet Polishing Materials
- Belt Polishing Materials
- Grinding Stones with Shafts
- DIA/CBN Bars
- Ultra-Hard Bars
- Wheels with Shafts
- Brushes with Shafts
- Cup Brushes
- Hand Brushes
- Stick Grinding Stones
- Files
- Deburring Tools
- Polishing Materials for Grinders
-
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.