Circular saw blades（work material：Iron）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Cermet Tipped Saw Sakura (for Iron)
FUJI GRINDING WHEEL
Due to the integration of the special grooving of the base metal and the cermet insert, the durability has increased by more than 30%. Absorbs vibration with a laser slit and special resin (in-house comparison). Demonstrates silent effect.- Volume Discount
Configure nowStarting from∗ ： 248.54 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Circular Saw (for Sheet Metal)
MOTOYUKI
[Features]
· Can be used with galvalume.
· Suitable for cutting a wide range of thin iron plates and other metal plates.
· It suppresses fluttering while cutting, enabling smooth cutting.
[Applications]
· For materials such as thin iron plates, metal siding, galvanized sheets, tin, wavy corners and wavy sheets, aluminum sash, thin pipes, plastic plates, and vinyl chloride pipes.- Volume Discount
Configure nowStarting from∗ ： 69.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Circular Saw (for Corrugated Corner Spans)
MOTOYUKI
[Features]
· Can be used with galvalume.
· Uses a blade type optimal for square corrugated material/square span.
· Clean cutting is possible with few burrs.
[Applications]
· Square wave/square span, metal sidings, batten seam metal rain gutters, zinc/tin plate, etc.- Volume Discount
Configure nowStarting from∗ ： 69.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Button
FUJI GRINDING WHEEL
[Features]
-It can be used for cutting electrical wires, duct steel and copper pipes.
[Features]
A carbide blade is used for excellent economy.- Volume Discount
Configure nowStarting from∗ ： 70.23 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Dunk for Iron and Steel
TIPSAW
It can cut longer by using a cermet insert with excellent wear resistance. Laser slit resin embedded "anti-vibration silent type". Spark resistance, burn resistance, and fast cutting speed improve work efficiency.- Volume Discount
Configure nowStarting from∗ ： 69.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chargeable Circular Chip Saw for Sheet Metal Work
IWOOD
[Features]
· With a balance optimized for simple recharging, this rechargeable chip saw supports all applications.
· 100% laser cut using ultra-thin blade on base metal. Smooth cutting and beautiful cut surface retained with special tip undergoing precision polishing.- Volume Discount
Configure nowStarting from∗ ： 56.43 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Sheet Metal Craftsman (99440,99442,99443,99444)
IWOOD
Special blade shape enables burr-free light and clean cutting- Volume Discount
Configure nowStarting from∗ ： 51.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Super All-Mighty (Cutting Various Materials)
YAMASHIN SEIKYO
YAMASHIN original. Original Super Almighty. Cutting wood, aluminum, iron, or PVC is possible with this one piece thanks to powder metal chips.- Volume Discount
Configure nowStarting from∗ ： 44.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Super All-Mighty Slide / Tabletop Circular Saw-Use (Cutting Various Materials)
YAMASHIN SEIKYO
Super Almighty Desktop & Sliding Circular Saw lineup. Cutting wood, aluminum, iron, or PVC is possible with this one piece thanks to powder metal chips.- Volume Discount
Configure nowStarting from∗ ： 54.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Super All-Mighty ZERO (Cutting Various Materials)
YAMASHIN SEIKYO
Single unit can easily and smoothly cut iron, wood, polyvinyl chloride and aluminum. This is ZERO. Cutting wood, aluminum, iron, or PVC is possible with this one piece thanks to powder metal chips.- Volume Discount
Configure nowStarting from∗ ： 25.83 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hybrid X (Multi-Material Cutting Blade)
YAMASHIN SEIKYO
Hybrid X: the home use version of Super Almighty. Cutting wood, aluminum, iron, or PVC is possible with this one piece thanks to powder metal chips.- Volume Discount
Configure nowStarting from∗ ： 31.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Lightweight Chipsaw
MOTOYUKI
[Features]
· Compatible with high speed tip saw cutting machines.
· Applicable model: Shindaiwa LA1205, Sanko-Mitachi SSC305, Mac MAC305, Might Industry MC-305M, Fuji Grinding Wheel MFG FT305, etc.- Volume Discount
Configure nowStarting from∗ ： 145.14 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Zet Flasher
LOBTEX
Multiple sharp blades with excellent sharpness and don't leave burrs or deform the cutting plane and deliver a beautiful finish.- Volume Discount
Configure nowStarting from∗ ： 93.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tokumaru Chip Saw (for Steel) 5-Pack【5 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Economy chip saw specialized for cutting soft iron with a carbide tip.
· Long life and maintains smooth sharpness.
· A bargain 5-piece set.
[Applications]
· For cutting angle steel, iron bars, iron pipes, hanger rails, channel steel, and various shaped steel.- Volume Discount
Configure nowStarting from∗ ： 122.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tokumaru Chip Saw (for Iron)
TRUSCO NAKAYAMA
[Features]
· Economy chip saw specialized for cutting soft iron with a carbide tip.
· Long life and maintains smooth sharpness.
[Applications]
· For cutting angle steel, iron bars, iron pipes, hanger rails, channel steel, and various shaped steel.- Volume Discount
Configure nowStarting from∗ ： 37.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 49.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Chip Saw for General Steel Material
MOTOYUKI
Hilti rechargeable circular saw for cutting metals is supported.
[Features]
· The use of a special cermet insert with excellent wear resistance, high hardness and high toughness suppresses chipping and provides long tool life.
· Designed with a thin, light, sharp blade to reduce resistance during cutting, increasing cutting speed.
[Applications]
· Steel pipe/perforated angle/stud bolt/hanger rail/lip steel.- Volume Discount
Configure nowStarting from∗ ： 88.05 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Chip Saw for General Steel Material
MOTOYUKI
○HS-165
Compatible with high speed tip saw cutting machines.
[Features]
· Supports 165 mm, small tip saw cutting machine (recommended rotation speed of 5,000 min-1).
[Applications]
· Steel pipe/perforated angle/stud bolt/aluminum/polyvinyl chloride resin, etc.
○HS-305
Supports high speed chip saw cutting machines for steel.
[Features]
· Laser slitting in unique shapes and unique resin filling dramatically reduce noise during cutting.
[Applications]
· Used for angle steel / channel steel / C type channel steel / rebar / flat bar / steel pipe / gas pipe / lining steel pipe / cast iron pipe / threaded rod / hanger rail, etc.- Volume Discount
Configure nowStarting from∗ ： 80.17 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Sakura (FHU Type)
FUJI GRINDING WHEEL
[Features]
· High performance cutting blade made using cermet tips.
· Superior heat and abrasion-resistance over carbide tips. Capable of smoothly cutting not only iron but also stainless steel.
· The special base metal processing helps prevent cutting chips from scattering off everywhere.
[Applications]
· For ironworking thin items- Volume Discount
Configure nowStarting from∗ ： 257.98 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| work material |
| Chip |
| Cutting Performance(mm) |
| Cutting Capacity (Steel)(mm) |
| Cutting Capacity (Stainless Steel)(mm) |
| Outer Diameter(mm) |
| Blade thickness(mm) |
| Number of flutes(P) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | FUJI GRINDING WHEEL | MOTOYUKI | MOTOYUKI | FUJI GRINDING WHEEL | TIPSAW | IWOOD | IWOOD | YAMASHIN SEIKYO | YAMASHIN SEIKYO | YAMASHIN SEIKYO | YAMASHIN SEIKYO | MOTOYUKI | LOBTEX | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | OMIKOGYO | MOTOYUKI | MOTOYUKI | FUJI GRINDING WHEEL |
| Product Series | Super All-Mighty Slide / Tabletop Circular Saw-Use (Cutting Various Materials) | ||||||||||||||||||
| Starting from∗ | 248.54 € *Unit price with basic configuration Volume Discount | 69.47 € *Unit price with basic configuration Volume Discount | 69.55 € *Unit price with basic configuration Volume Discount | 70.23 € *Unit price with basic configuration Volume Discount | 69.79 € *Unit price with basic configuration Volume Discount | 56.43 € *Unit price with basic configuration Volume Discount | 51.03 € *Unit price with basic configuration Volume Discount | 44.01 € *Unit price with basic configuration Volume Discount | 54.48 € *Unit price with basic configuration Volume Discount | 25.83 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 31.89 € *Unit price with basic configuration Volume Discount | 145.14 € *Unit price with basic configuration Volume Discount | 93.00 € *Unit price with basic configuration Volume Discount | 122.65 € *Unit price with basic configuration Volume Discount | 37.27 € *Unit price with basic configuration Volume Discount | 49.89 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 88.05 € *Unit price with basic configuration Volume Discount | 80.17 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 257.98 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 12 Days | 6 Days | 6 Days | 12 Days | 6 Days | 8 Days | 5 Days | 6 Days | 5 Days | Same day | 5 Days | 10 Days | 5 Days | 6 Days | 6 Days | Same day | 7 Days | Same day | 10 Days |
| work material | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron | Iron |
| Chip | - | Carbide | Carbide | - | - | - | - | - | - | - | - | Cermet | Diamond | Carbide | Carbide | Cermet | Cermet | Carbide / Cermet | - |
| Cutting Performance(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Cutting Capacity (Steel)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | 4 ～ 10 | 6 | 6 | 4 ～ 9 | 3 | 6 ～ 10 | - |
| Cutting Capacity (Stainless Steel)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Outer Diameter(mm) | 355 ～ 405 | 100 ～ 125 | 100 ～ 216 | 180 | 100 ～ 255 | 110 ～ 125 | 125 ～ 180 | 100 ～ 190 | 190 ～ 305 | 100 ～ 190 | 147 ～ 190 | 305 | 180 ～ 307 | 180 | 180 | 100 ～ 180 | 165 | 165 ～ 305 | 310 |
| Blade thickness(mm) | 2.4 ～ 2.8 | 1 ～ 1.2 | 1 ～ 1.8 | 2 | 1.6 ～ 2.2 | 1 | 1.2 ～ 1.5 | 1.1 ～ 1.5 | 2 ～ 3 | 1.1 ～ 1.5 | 1.4 ～ 1.6 | 2 | - | 1.8 | 1.8 | 1.3 ～ 1.6 | 1.4 | 1.4 ～ 1.8 | 2 |
| Number of flutes(P) | 64 ～ 80 | 36 ～ 42 | 36 ～ 60 | 40 | 22 ～ 60 | 40 ～ 46 | 50 ～ 72 | 32 ～ 55 | 72 ～ 100 | 32 ～ 52 | 52 | 60 | 40 ～ 54 | 36 | 36 | 20 ～ 30 | 40 | 40 ～ 50 | 80 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
work material
- Aluminum
- Stainless Steel
- Spiral duct
- Polyvinyl chloride, plastic
- Building Material
- Iron + Stainless Steel
- Iron Bar
- Iron
- Wood
-
Chip
- Carbide
- Cermet
- Tungsten Carbide
- Diamond
-
Cutting Performance(mm)
-
Cutting Capacity (Steel)(mm)
-
Cutting Capacity (Stainless Steel)(mm)
-
Outer Diameter(mm)
-
Blade thickness(mm)
-
Number of flutes(P)
Brand
-
- MISUMI (0)
- MOTOYUKI (5)
- YAMASHIN SEIKYO (4)
- FUJI GRINDING WHEEL (3)
- IWOOD (2)
- TRUSCO NAKAYAMA (2)
- LOBTEX (1)
- OMIKOGYO (1)
- TIPSAW (1)
- DREMEL (0)
- RESITON (0)
- EARTH MAN (0)
- HITACHI KOKI (0)
- SK 11 (0)
- YANASE (0)
- HOUSE BM (0)
- BAKUMA (0)
CAD data type
-
- 2D
- 3D
Categories related to Circular saw blades
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.