GANTER Indexing Plungers

Narrow search by specifying Type

Standard Knob
Lever Type
With Side Flange
With Ring
With Vertical Flange
Related Components
W/o Knob
Special Knobs

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship and prices

Promotional pricing

Cam action indexing plungers, Stainless Steel

GANTER

Stainless Steel-Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	17.32 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Cam action indexing plungers with flange / Guide zinc die casting

GANTER

Cam action indexing plungers GN 612.9 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Indexing plungers / Plastic knob

GANTER

Stainless Steel-Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	12.32 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers for precision locating

GANTER

Indexing plungers GN 817.3 realize a reasonable priced precision locating when guide bushes DIN 179 are used.
For this purpose a guide bush DIN 179 is used as guide, whereby the dimension l3 of the plunger determines the length of the bush.
The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bush (bore tolerance F7) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying that the bush length also influences the accuracy of the positioning.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	27.02 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Steel, with knob, with and without rest position

GANTER

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.12 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing Plungers / Steel, Plastic-Knob / GN 817

GANTER

Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.80 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing Plungers / Removable / Steel / GN 817.8

GANTER

Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	12.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers with rest position, Plunger Steel

GANTER

Indexing plungers GN 608.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 608.1 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.12 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Stainless Steel / Plastic knob

GANTER

Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	13.00 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Cam action indexing plungers, Steel, with locking function

GANTER

The groove on GN 721.1 cam action indexing plungers ensures that the locking pin remains in its withdrawn position.
For opposing cam action indexing plungers the left or right-handed types allow practical use, that is the same setting of the lock.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	18.28 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit

GANTER

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	4.08 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing Plungers / Steel / GN 7017

GANTER

GN 7017 indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	6.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Mini indexing plungers

GANTER

Stainless Steel-Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
In type CN, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.56 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Stainless Steel, with knob, with and without rest position

GANTER

GN 717 Stainless Steel-Indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.52 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Locking plungers, PUSH-PUSH locking mechanism

GANTER

The indexing pin in the locking plungers GN 514 is moved via a so-called cardioid mechanism.

This mechanism means that the indexing pin is both extended and retracted alone by pressing the operating button (PUSH-PUSH locking mechanism).

Please note that the indexing pin cannot absorb any axial forces and that it retracts virtually by spring action; the indexing pin must therefore remain free and easy to move.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.76 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Indexing plungers with long plastic knob

GANTER

Stainless Steel-Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.28 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers with rest position, Stainless Steel / Plastic knob

GANTER

Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.98 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Spring bolts, Steel / Plastic knob

GANTER

The plunger of the spring bolts GN 313 does not protrude in the inoperative position.
It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Spring latches with flange for surface mounting

GANTER

Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	31.88 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers with T-Handle

GANTER

Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.50 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Plunger Steel

GANTER

Indexing plungers GN 608 are distinguished for their small dimensions.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	8.62 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Locking plungers, Plunger protruded

GANTER

If not operated, the plunger of the locking plungers GN 816 protrudes. To retract, move against the spring force and hold in the end position by turning by 90°.
The shape of the cam curve secures the plunger against accidental operation.
When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	19.58 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Mini indexing plungers, covered indexing mechanism / with and without rest position

GANTER

Mini indexing plungers GN 822.6 are distinguished for their small dimensions.
Based on the principle of the GN 822 mini indexing plungers, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	6.02 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Mini indexing plungers, Stainless Steel / Plastic knob

GANTER

Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	6.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Indexing plungers / without rest position / GN 617

GANTER

The indexing plungers GN 617 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	19.62 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Indexing plungers / with rest position / GN 617.1

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	30.50 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Indexing plungers, removable / GN 817.8

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	17.90 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Spring latches for welding / GN 722.1

GANTER

Stainless Steel-Spring latches GN 722.1 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
The square bar allows the latch to be welded in any desired position. To prevent excessive heating up and the resulting change in the spring properties, fixing with welding spots is recommended.
Stainless Steel-Spring latches GN 722.1 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	28.38 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Cam action indexing plunger, Plunger pin retracted

GANTER

Cam action indexing plungers GN 712.1 are used in such applications where the plunger pin has to protrude only occasionally. When turning the cam by 90° resp. 120° degrees in clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is protruded.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in protruded position (Type R), resp. is secured against accidental operation (Type S). In order to move the plunger pin, safety version Type S requires an additional pushing of the latch.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	25.62 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Mini indexing plungers, open indexing mechanism

GANTER

Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.40 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Spring latches with flange for surface mounting / GN 722.2

GANTER

Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	13.78 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Spring latches with flange for surface mounting

GANTER

Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°.
A lock notch will hold the latch in both positions.
Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	15.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Cam action indexing plungers, without locking function

GANTER

For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	22.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Mini indexing plungers, with and without rest position

GANTER

Stainless Steel-Mini indexing plungers GN 822.9 are distinguished for their small dimensions. They are mounted by countersunk screws.
The Stainless Steel-Mini indexing plungers present an affordable alternative to the GN 608.5 and GN 608.6 Stainless Steel-Indexing plungers.
In types C and CN, the button can be turned by 30° after retracting the indexing pin, holding it in the "retraced" position using the indexing lock.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Spring latches for welding / GN 722.1 / TypeA , AU

GANTER

[Specifications]
・Type: A. Latch riveted. not removable, AU. Latch screwed. removable
・Material: A4. Stainless Steel precision casting

With spring latches GN 722.1, the plunger pin is retracted over the curve of the guide by a 180° turn of the latch. The notch at the upper end of the curve causes the latch to be held in place if the plunger pin needs to be kept temporarily from protruding.The ST version is designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments.

Volume Discount

Starting from^∗ ：	24.86 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Promotional pricing

Cam action indexing plungers, Steel

GANTER

Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.22 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Cam action indexing plungers, Zinc die casting

GANTER

Cam action indexing plungers GN 612.8 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. The notch allows safe positioning.
These cam action indexing plungers made of die-cast zinc are very reasonably priced design versions.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.80 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Clamping knobs with indexing plunger

GANTER

Clamping knobs with indexing plunger GN 7336.7 are used for positioning, securing and clamping adjusting elements at the same time.
The axial movement of the handle (pulling) pulls the indexing pin from the engaged position against the spring force, with the star know at the same time remaining connected with form-lock to the clamping screw via a hexagonal element, allowing both clamping and releasing.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	8.56 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, plunger conical

GANTER

Indexing plungers GN 817.5 allow highly accurate positioning, with the guidance made by the positioning bushings DIN 172 / DIN 179 with cylindrical bore. The actual indexing bore is fitted with positioning bushings GN 172.1 / GN 179.1 with conical bores.
The conical shape of the indexing pin / the indexing bore makes the positioning virtually clearance-free and therefore highly precise.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	35.32 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Steel, with red knob

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.80 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Mini indexing plungers Zinc die casting / Plastic-knob

GANTER

Mini indexing plungers GN 822.8 are distinguished for their small dimensions. They are mounted by countersunk screws.
The mini indexing plungers present an affordable alternative to the GN 608 and GN 608.1 indexing plungers.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	6.24 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Mini indexing plungers, open indexing mechanism, with red knob

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.40 €
	Special price
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Spring bolts, Stainless Steel / Plastic knob

GANTER

The plunger of the Stainless Steel-Spring bolts GN 313 does not protrude in the inoperative position.
It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	13.50 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Cam action indexing plungers for welding

GANTER

Stainless Steel-Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	25.90 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Stainless Steel-Indexing plungers / without rest position / GN 613

GANTER

The indexing plungers GN 613 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator, GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	18.78 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Type
Locking Mechanism
Mounting Method
Overall Length
Body Material
All Stainless
Tip Material
Body O.D./Thread M(mm)
Stroke S(mm)
Tip Surface Treatment
Tip Heat Treatment
Tip O.D. d(Ø)
Length L(mm)

	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing		Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing				Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing		Promotional pricing		Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing
Brand	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Product Series	Cam action indexing plungers, Stainless Steel	Cam action indexing plungers with flange / Guide zinc die casting	Stainless Steel-Indexing plungers / Plastic knob	Indexing plungers for precision locating	Indexing plungers, Steel, with knob, with and without rest position	Indexing Plungers / Steel, Plastic-Knob / GN 817	Indexing Plungers / Removable / Steel / GN 817.8	Indexing plungers with rest position, Plunger Steel	Indexing plungers, Stainless Steel / Plastic knob	Cam action indexing plungers, Steel, with locking function	Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit	Indexing Plungers / Steel / GN 7017	Stainless Steel-Mini indexing plungers	Indexing plungers, Stainless Steel, with knob, with and without rest position	Locking plungers, PUSH-PUSH locking mechanism	Stainless Steel-Indexing plungers with long plastic knob	Indexing plungers with rest position, Stainless Steel / Plastic knob	Spring bolts, Steel / Plastic knob	Stainless Steel-Spring latches with flange for surface mounting	Indexing plungers with T-Handle	Indexing plungers, Plunger Steel	Locking plungers, Plunger protruded	Mini indexing plungers, covered indexing mechanism / with and without rest position	Mini indexing plungers, Stainless Steel / Plastic knob	Stainless Steel-Indexing plungers / without rest position / GN 617	Stainless Steel-Indexing plungers / with rest position / GN 617.1	Stainless Steel-Indexing plungers, removable / GN 817.8	Stainless Steel-Spring latches for welding / GN 722.1	Cam action indexing plunger, Plunger pin retracted	Mini indexing plungers, open indexing mechanism	Spring latches with flange for surface mounting / GN 722.2	Spring latches with flange for surface mounting	Stainless Steel-Cam action indexing plungers, without locking function	Stainless Steel-Mini indexing plungers, with and without rest position	Stainless Steel-Spring latches for welding / GN 722.1 / TypeA , AU	Cam action indexing plungers, Steel	Cam action indexing plungers, Zinc die casting	Clamping knobs with indexing plunger	Indexing plungers, plunger conical	Indexing plungers, Steel, with red knob	Mini indexing plungers Zinc die casting / Plastic-knob	Mini indexing plungers, open indexing mechanism, with red knob	Spring bolts, Stainless Steel / Plastic knob	Stainless Steel-Cam action indexing plungers for welding	Stainless Steel-Indexing plungers / without rest position / GN 613
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	17.32 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.42 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	12.32 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	27.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.12 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.80 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	12.46 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.12 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	13.00 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	18.28 € *Unit price with basic configuration Volume Discount	4.08 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.42 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.56 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.52 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.76 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.28 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.98 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.38 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	31.88 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.50 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	8.62 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	19.58 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.46 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	19.62 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	30.50 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	17.90 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	28.38 € *Unit price with basic configuration Volume Discount	25.62 € *Unit price with basic configuration Volume Discount	5.40 € *Unit price with basic configuration Volume Discount	13.78 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	15.46 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	22.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.38 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	24.86 € *Unit price with basic configuration Volume Discount	14.22 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.80 € *Unit price with basic configuration Volume Discount	8.56 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	35.32 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.80 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.24 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.40 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	13.50 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	25.90 € *Unit price with basic configuration Volume Discount	18.78 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	7 Days	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	12 Days	7 Days	7 Days	Same day	Same day	Same day	Same day	12 Days	Same day	3 Days	Same day	Same day	Same day	Same day	4 Days	Same day	7 Days	7 Days
Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	With Side Flange	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Locking Mechanism	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	With Locking Nose	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Flange	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Overall Length	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Body Material	Stainless Steel	-	Stainless Steel	-	Steel	-	Steel	-	Stainless Steel	-	Steel	Steel	-	Stainless Steel	-	Stainless Steel	Stainless Steel	-	Stainless Steel	-	-	-	-	-	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	-	Steel / Stainless Steel	Steel / Stainless Steel	-	-	-	-	-	-	-	-	-	-	Steel / Stainless Steel	-	Stainless Steel	Stainless Steel
All Stainless	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Applicable / Not Compliant	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Steel / Stainless Steel	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Body O.D./Thread M(mm)	-	16 ～ 20	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Stroke S(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	14	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Surface Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Not Provided / Zinc Plating	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Heat Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Not Provided	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip O.D. d(Ø)	4 ～ 12	6 ～ 12	4 ～ 16	6 ～ 10	3 ～ 10	4 ～ 16	7 ～ 12	6 ～ 8	5 ～ 10	5 ～ 10	3 ～ 10	4 ～ 10	4 ～ 10	3 ～ 10	6 ～ 8	4 ～ 12	5 ～ 10	5 ～ 10	8 ～ 14	6 ～ 12	6 ～ 8	6 ～ 10	4 ～ 10	4 ～ 10	5 ～ 10	5 ～ 10	7 ～ 12	-	6 ～ 8	4 ～ 7	8 ～ 14	8 ～ 14	5 ～ 10	4 ～ 10	-	4 ～ 12	4 ～ 12	-	6 ～ 10	4 ～ 16	4 ～ 10	4 ～ 7	5 ～ 10	-	5 ～ 10
Length L(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	68	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Locking Mechanism
- Not Provided
- With Locking Nose
- Without Locking Nose
Images

Clear

Mounting Method
- Screw-In
- Press Fit
- Bolt Mounting
- Others
- Flange
Clear

Overall Length
- Standard
- Short
Clear

Body Material
- Steel
- Stainless Steel
- Zinc Die Cast
- Polyamide
- Others
Clear

All Stainless
- Applicable
- Not Compliant
Clear

Tip Material
- Steel
- Stainless Steel
Clear

Body O.D./Thread M(mm)
3

5

6

8

10

M10

12

M12

14

14.5

16

M16

18

20

M20

22

24
Drawing

Clear

Stroke S(mm)
3.5

4

5

5-9

6

6-10

7

7.5

8

9

9.5

10

12

14

15

16

18

19

20

24

25
Drawing

Clear

Tip Surface Treatment
- Not Provided
- Black Oxide
- Trivalent Chromate
- Electroless Nickel Plating
- Nickel Plating
- Others
- Zinc Plating
Clear

Tip Heat Treatment
- Not Provided
- Hardened
- Carburized
Clear

Tip O.D. d(Ø)
2

2.5

3

4

5

6

7

7.1

8

M8 x 1

8.28

10

M10 x 1

11.52

12

M12 x 1,5

14

15.49

16

M16 x 1,5

18

19.7

20

M20 x 1,5

22

25

30

60

80
Drawing

Clear

Length L(mm)
25

26.5

29.5

30

30.5

31

31.5

32

33

34

34.5

35

36

37

37.5

38

38.5

39

40

40.5

41

41.5

41.7

42

42.5

43

43.5

44

44.5

45

46

46.5

47

47.5

48

49

50

51

51.7

52

53

54

54.5

54.7

56

56.5

57

57.25

57.5

58

58.5

59

59.5

60.4

60.5

61

62

63

63.5

64.5

65

66

67.5

68

68.5

69

70

70.5

71

72

72.5

73

74

75

75.5

76

77

79

80

80.5

82

83

84

85

86.5

91

92

98.5

99.9

102.5

123
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (19)
- Cost Efficient Products ()
- NORELEM (183)
- KIPP (142)
- GANTER (88)
- HALDER (37)
- NABEYA BI-TECH (25)
- KONISHI MFG (19)
- IMAO CORPORATION (18)
- ELESA (4)
- NABEYA (1)
- TOSHIN CASTER (1)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

Narrow search by specifying lead time

All

Same day

2 Days or Less

3 Days or Less

4 Days or Less

5 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less
Clear