GANTER Clamping Knobs（Mounting Section Diameter d(mm) and/or Diameter：M 10）

Star knobs DIN 6336 with bore H7 are available under code GN 6336.1 and GN 6336.2.

Torque limiting knobs GN 3663 are used when the manually applied torque is to be limited.When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.

Star knobs GN 6336.5 comply with DIN 6336 type L.

Torque limiting knob screws GN 3663 are used when the manually applied torque is to be limited.When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.

The star knobs have an immaculate contact or clamping surface thanks to the protruding steel bushing.

The star knobs have an immaculate contact or clamping surface thanks to the protruding Stainless Steel bushing.

Star knobs GN 6336.2 with bushing have important advantages:The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

Stainless Steel - Triangular knobs GN 5339.5 have been specially designed for use on machinery in the food industry.The smooth and enclosed areas as well as the corner radii comply with the requirements of hygiene standards.Original ELESA-Design, manufactured in metal version under permission of ELESA s.p.a.