GANTER Clamping Knobs（Page 2）

?* Information on days to ship and prices

• 

  Control knobs, Aluminium, natural colour, anodized

  GANTER

  Control knobs GN 723.4 can be combined with reference flanges GN 723.3 which offer the following advantages:
  - they are provided with a reference mark relating to the scale on the control knobs
  - they give additional support to the control shaft,
  - the version with a friction ring prevents unexpected movement through vibration.
  Scale and arrow on the control knobs are indelibly marked and easily legible.
  Besides the standard scale (Type S) they can be supplied with any type of graduation.
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale knobs on the order sheet „How to order Graduations“

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	26.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Flat knurled screws with brass / plastic pivot

  GANTER

  Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.
  The head dimensions comply with flat knurled thumb screws DIN 653.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	4.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Flat Knurled screws, Stainless Steel

  GANTER

  All Stainless Steel-Flat knurled screws DIN 653 are produced from one piece and threaded over its full length.

  • Volume Discount

  Starting from∗ ：	2.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Hand knobs, Cast iron

  GANTER

  Hand knobs, Cast iron

  • Volume Discount

  Starting from∗ ：	3.60 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Hand knobs, Plastic, protruding Stainless Steel bushing, Stainless Steel-Threade

  GANTER

  The hand knobs have an immaculate contact or clamping surface thanks to the protruding Stainless Steel bushing.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	2.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing mechanisms, Steel

  GANTER

  Indexing mechanisms GN 200 replace and simplify complicated indexing and safety mechanisms.
  Besides the standard scale (Type AS) the control knob version may be supplied with any scale. In such cases, it is recommended to use the matt chrome plated version since the colour contrast is better.
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	70.76 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Knobs, Stainless Steel

  GANTER

  Stainless Steel-Knobs GN 676.5 are used in applica-tions where a push or pull movement is required. Their concave top gives a more comfortable thumb grip.
  The knurled model (Type B) can be used as an attractively shaped knurled knob with a threaded blind hole.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	7.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Knurled screws with recessed stud for loss prevention

  GANTER

  Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
  When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
  Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	2.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Knurled screws, with pivot

  GANTER

  Knurled screws GN 7336.5, type MS/KU with brass or plastic pivots are used when pressure dents or damage must be avoided.
  Knurled screws GN 7336.5, type ZK feature a spherical pivot whose Ø d6 is smaller than the core Ø of the thread. The version with spherical pivot is suitable for holding GN 631 / GN 631.5 thrust pads, which must be ordered separately.
  The knurled screws GN 7336.5 distinguish an attractive design in combination with closed shape (no recess on the underside of the handles).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	5.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stainless Steel-Flat knurled screws with brass / plastic pivot

  GANTER

  Stainless Steel-Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.
  The head dimensions comply with flat knurled thumb screws DIN 653.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	6.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing mechanisms

  GANTER

  Stainless Steel-Indexing mechanisms GN 200 replace and simplify complicated indexing and safety mechanisms.
  Besides the standard scale (Type AS) the control knob version may be supplied with any scale.
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	123.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Star knobs AISI 316L (A4)

  GANTER

  Stainless Steel-Star knobs GN 5335.4 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	24.74 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Star knobs with threaded bolt AISI 316L (A4)

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	15.44 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Star knobs with threaded stud

  GANTER

  Stainless Steel-Star knobs with threaded stud GN 5335 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	21.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Star knobs with protruding Stainless Steel bushing

  GANTER

  Star knobs GN 6336.1 with all Stainless Steel bushing (main dimensions of DIN 6336) have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	4.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Star knobs, Brass insert

  GANTER

  Star knobs, Brass insert

  • Volume Discount

  Starting from∗ ：	1.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Star knobs, Hygienic Design

  GANTER

  GN 5435 star knobs are intended for use in hygiene areas. The sealed mounting surface enables fastening without dead spaces. The high quality finish and the large corner radii prevent adherence of dirt and facilitate cleaning.

  • Volume Discount

  Starting from∗ ：	33.54 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Star knobs, Technopolymer, with protruding steel bushing

  GANTER

  Star knobs GN 6336.2 with bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	1.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tommy nuts, with movable bar

  GANTER

  The movable bar of the tommy nut DIN 6307 is held in any position by the pressure spring.
  The plastic end caps limit the travel distance. They are pressed on with form-lock and may be supplied separately if the parts are to be electro-plated. The official DIN standard sheets provides for steel rings at this point.
  

  • Volume Discount

  Starting from∗ ：	15.66 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Safety star knobs, Plastic

  GANTER

  • Volume Discount

  Starting from∗ ：	11.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Three-lobe knobs AISI 303

  GANTER

  • Volume Discount

  Starting from∗ ：	22.28 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Star knobs, Cast iron, zinc plated, blue passivated

  GANTER

  • Volume Discount

  Starting from∗ ：	4.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjustable knobs

  GANTER

  With GN 700 adjustable knobs a shaft can be infinitely adjusted in both directions. The anti-backlash mechanism with a max. load of 15 Nm ensures the firm locking of the shaft in any position.
  This mechanism prevents any uncontrolled movement of the shaft. The locking action is a safety feature to prevent unwanted re-adjustments caused by backlash and vibration.
  Scale and arrow on the control knobs are indelibly marked and easily legible.
  Besides the standard scale (Type AS) the control knob version may be supplied with any other scale (Type KS).
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	220.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Control knobs, Aluminium, black anodized

  GANTER

  The light grey cover of the control knobs GN 726 shrouds the fixing components as well as the shaft end. The cover also lends itself for a logo or other symbols.
  Made from an aluminum extrusion allows the manufacture of customized solutions in existing diameters at relatively low cost.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	9.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Control knobs, Aluminium, black anodized

  GANTER

  Control knobs GN 729 are usually selected for applications which require a limited movement within 180°.
  With the aid of limiting pins which protrude into the circular groove the angle of rotation can be restricted. The bore d4 is for a spring plunger GN 614 to act as a simple detent.
  The indexing line is indelible and visible from two sides.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	16.38 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Control knobs, Stainless Steel

  GANTER

  Scale and arrow on the Stainless Steel-control knobs GN 436.1 are indelibly marked and easily legible.
  Besides the standard scale (Type S) the control knobs can be supplied with any type of graduation.
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale knobs on the order sheet „How to order Graduations“
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	21.24 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Control knobs, Stainless Steel

  GANTER

  Control knobs, Stainless Steel

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	18.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Flat knurled screws, Steel

  GANTER

  All flat knurled screws DIN 653 are produced from one piece and threaded over ist full length.

  • Volume Discount

  Starting from∗ ：	1.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hand knobs with increased clamping force

  GANTER

  Hand knobs GN 6335.9 have a clamping contact area which is connected to the knob via an axial ball bearing. This has led to the following advantages:
  Doubled clamping force through vastly reduced friction. There is no movement on the contact area between star knob and component which greatly reduces any marking on the clamping area. In addition a reduced creep factor has been achieved by the indreased preload.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	27.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Hand knobs, cast, iron, with threaded bolt steel

  GANTER

  Hand knobs, cast, iron, with threaded bolt steel

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	7.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Hand knobs, Duroplast, with protruding steel bushing

  GANTER

  Hand knobs GN 6335.1 with protruding steel bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	2.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Hand knobs, Plastic, protruding steel bushing, threaded bolt

  GANTER

  The hand knobs GN 6335.4 have an immaculate contact or clamping surface thanks to the protruding steel bushing.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	2.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Hand knobs, plastic, with threaded bolt, Steel

  GANTER

  Hand knobs GN 6335.4 comply with DIN 6335 type L.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	0.88 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Hand knobs, Stainless Steel

  GANTER

  Hand knobs, Stainless Steel

  • Volume Discount

  Starting from∗ ：	9.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Hand knobs, Technopolymer, with protruding Stainless Steel bushing

  GANTER

  Hand knobs GN 6335.2 with protruding Stainless Steel bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	3.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Hand knobs, Technopolymer, with protruding steel bushing

  GANTER

  Hand knobs GN 6335.2 with protruding steel bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	1.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Knobs, Steel

  GANTER

  Knobs GN 676.1 are used in applications where a push or pull movement is required. Their concave top gives a more comfortable thumb grip.
  The knurled model (Type B) can be used as an attractively shaped knurled knob with a threaded blind hole.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	7.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Knurled knobs, Plastic

  GANTER

  Knurled knobs GN 7336 distinguish an attractive design in combination with closed shape (no recess on the underside of the handles).
  Knurled knobs GN 7336 are also available without threaded insert.
  Article codes:
  GN 7336-34
  GN 7336-42
  GN 7336-53

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	4.22 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Knurled screws, Plastic

  GANTER

  Knurled screws GN 7336 distinguish an attractive design in combination with closed shape (no recess on the underside of the handles).
  Knurled screws GN 7336 are also available without threaded insert.
  Article codes:
  GN 7336-34
  GN 7336-42
  GN 7336-53

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	4.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Reference flanges for GN 723.4

  GANTER

  Reference flanges GN 723.3 are used together with control knobs GN 723.4 which offer the following advantages:
  - they have a reference mark to line up with the control knob scale,
  - they offer additional support for the control shaft,
  - the version with friction ring prevents an unexpected movement of the control knob by vibration.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	14.12 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stainless Steel-Hand knobs, casting only

  GANTER

  Stainless Steel-Hand knobs, casting only

  • Volume Discount

  Starting from∗ ：	4.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stainless Steel-Star knobs AISI 304

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	11.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Star knobs AISI 316L (A4)

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334.4 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	15.18 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Star knobs AISI 316L (A4), Casting only

  GANTER

  Stainless Steel-Star knobs GN 5335.4 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	25.50 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Star knobs, Casting only

  GANTER

  Stainless Steel-Star knobs GN 5335 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	17.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...