GANTER Washers / lock washers

Stainless Steel-Spherical washers DIN 6319 are used for clamping on non-parallel surfaces.When utilizing Stainless Steel-Hexagon nuts with spherical seating DIN 6330 type B the male washer is redundant.

Spherical washers DIN 6319 are used for clamping on non-parallel surfaces.Female washers Type G are mainly used on elongated holes.When utilizing hexagon nuts with spherical seating DIN 6330 the male washer is redundant.

Stainless Steel-Washers GN 6341 are used mainly in mechanical machine and jig construction when DIN 125, DIN 9021 and DIN 6340 washers no longer meet requirements.In particular, Type B for countersunk screws is ideal for solid screw connections with a low construction height.

Spherical washers combinations GN 6319.1 provide an "undetachable" connection for male and female spherical washers DIN 6319.They simply storage and allow fast and efficient installation.

Washers / Levelling disks GN 6343 are used mainly in mechanical engineering and jigmaking if shimming is required for levelling.

Washers GN 6341 are used mainly in mechanical machine and jig construction when DIN 125, DIN 9021 and DIN 6340 washers no longer meet requirements.In particular, Type B for countersunk screws is ideal for solid screw connections with a low construction height.

The influence of a washer on the quality of the screwed connection is very often underestimated. With washers GN 6339, high quality preloaded screwed connections can be established. A high static clamping force can be reached avoiding loss of tension. At a specified preloaded clamping force it is often possible to use thinner bolts. This can result in a better ratio between clamping distance and bolt diameter to minimise the danger of failure. The case hardened smooth bolt head/screw contact face leads to a lower and more constant friction co-efficient even when continuous clamping and releasing operations are required. Washers GN 6339 are only suitable for machine con-struction bolts of classes 8.8 / 10.9 / 12.9, and not for steel bolts DIN 6916.

Captive C-Washers DIN 6371 transfer the clamping force of screw or nut to the workpiece. After releasing the thread they can be swung away from the clamping point. They are hinged and thus can never be mislaid.Flat shoulder screws DIN 923 are included.

Spherical washers combinations GN 6319.1 provide an "undetachable" connection for male and female spherical washers DIN 6319.They simply storage and allow fast and efficient installation.

Dimensionally, Stainless Steel plates GN 2372 are designed as accessories for the GN 237 family of hinges, eliminating the need for nuts and washers for mounting.Meanwhile, there is no need for the time-consuming pre-assembly of washer and nuts or for counterholding during tightening. Mounted to the top side of the hinge, the plate offers entirely new assembly options.

The influence of a washer on the quality of the screwed connection is very often underestimated. With washers GN 6339, high quality preloaded screwed connections can be established. A high static clamping force can be reached avoiding loss of tension. At a specified preloaded clamping force it is often possible to use thinner bolts. This can result in a better ratio between clamping distance and bolt diameter to minimise the danger of failure. The case hardened smooth bolt head/screw contact face leads to a lower and more constant friction co-efficient even when continuous clamping and releasing operations are required. Washers GN 6339 are only suitable for machine construction bolts of classes 8.8 / 10.9 / 12.9, and not for steel bolts DIN 6916.

GN 2344 Stainless Steel-Retaining washers are universally usable standard parts. Type E is suitable for use in connection with retaining cables and ball chains to mount other standard or securing parts in order to prevent loss. Type L is suitable, for example, for mounting bolts or axes, which can thereby simultaneously be secured in an axial and also in a radial position.

Chamfers, different sheet metal thicknesses, or seals could mean that the mounting surfaces of hinges to frame and door are not on the same level.Stainless Steel-Spacer plates GN 2370, as accessories of the GN 237 and GN 337 family of hinges, are designed dimensionally so that they ensure the appropriate height compensation during mounting by shimming, either individually or in combination.The 2nd table includes a number of potential compensation heights which can be accomplished by shimming with one or two spacer plates.

Used in connection with clamping screws, e.g. star knob screws, Stainless Steel-Washers with axial friction bearing GN 6342 offer the following advantages:- almost double the clamping force owing to lower area friction- fixed contact surface acting gently on the element to be clamped

Used in connection with clamping screws, e.g. star knob screws, washers with axial friction bearing GN 6342 offer the following advantages:- almost double the clamping force owing to lower area friction- fixed contact surface acting gently on the element to be clamped

Washers DIN 6340 are mainly used for elongated holes.

Dampening washers GN 7062.30 are designed as accessories for semi-split set collars and are attached with the help of an adhesive film, preferably on the groove-less side of the set collar. They absorb mild shocks and have a sound-dampening effect when the set collars come into contact with other components.Generally, after the protective film is removed, the damping washers can be attached to any suitable and clean surface.Semi-split set collars GN 7062.3 are generally offered with assembled dampening washers.]

Dampening washers GN 7072.30 are designed as accessories for split set collars and are attached with the help of an adhesive film, preferably on the groove-less side of the set collar. They absorb mild shocks and have a sound-dampening effect when the set collars come into contact with other components.Generally, after the protective film is removed, the dampening washers can be attached to any suitable and clean surface.Split Stainless-Steel-Set collars GN 7072.3 are generally offered with assembled dampening washers.