HALDER Proximity Sensors

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Polling Units, with sensor

HALDER

For polling a workpiece on a seating element.
The polling unit is always built into a seating element as a single system. By means of a simple plug-in connection, it transmits whether a part is located at a specific position, as an electrical signal.
The polling unit can be used in combination with various seating elements. For example, the EH 22690 pins from the Halder standard parts are suitable.
Data is transferred via a cable connection. Optionally, the polling signal can be transferred by radio.
The interrogation unit meets the requirements of protection class IP6K7 (highly temperature-resistant and robust).

Starting from^∗ ：	289.85 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Radio Receivers, for polling unit

HALDER

For cable-free reception of the signal from the polling unit.
The antenna receives the radio signal from the polling unit, and transmits it via a cable connection to an input for the receiver. This activates the corresponding output (the make-contact). For each receiver, a maximum of four radio channels can be received.

Starting from^∗ ：	569.57 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Monitoring Units for Positioning Sensors, pneumatic

HALDER

The monitoring unit is used in combination with positioning sensors (EH 22800).
Together with the positioning sensors, the backwash pressure sensor makes it possible to poll the correct workpiece positioning.

Starting from^∗ ：	217.96 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Radio Transmitters, for polling unit

HALDER

For cable-free transfer of the polled signal.
The radio transmitter is installed close to the polling unit, and is connected to the plug of the polling unit. The transmitter makes the polled signal available by radio, and does not require additional cable connection. Power is supplied by a battery.
The radio transmitter meets the requirements of protection class IP 67 (robust material) and is therefore suitable for use with cooling lubricants.
Frequency: 868.3 MHz (EU, Switzerland)
Other frequencies available on request.

Starting from^∗ ：	825.28 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Sensor Shape
Detection Distance L1(mm)
Detection distance L1 [classification](mm)
Detection Object
Operating Environment
Shield
Detection Type
Sensor Case Material
Sensor Detection Surface Material
Amplifier
Detection Head Size Dimension M
Detection Head Size Dimension D(Ø)
Detection Head Size Dimension L2 (Range)(mm)
Detection Head Size Dimension W (Range)(mm)
Detection Head Size Dimension H (Range)(mm)
Protection Structure (IEC)
Protection Structure (DIN40050-9)


Brand	HALDER	HALDER	HALDER	HALDER
Product Series	Polling Units, with sensor	Radio Receivers, for polling unit	Monitoring Units for Positioning Sensors, pneumatic	Radio Transmitters, for polling unit
Starting from^∗	289.85 € *Unit price with basic configuration	569.57 € *Unit price with basic configuration	217.96 € *Unit price with basic configuration	825.28 € *Unit price with basic configuration
Min. Shipping Days ：	2 Days	2 Days	2 Days	2 Days
Sensor Shape	-	-	-	-
Detection Distance L1(mm)	-	-	-	-
Detection distance L1 [classification](mm)	-	-	-	-
Detection Object	-	-	-	-
Operating Environment	-	-	-	-
Shield	-	-	-	-
Detection Type	-	-	-	-
Sensor Case Material	-	-	-	-
Sensor Detection Surface Material	-	-	-	-
Amplifier	-	-	-	-
Detection Head Size Dimension M	-	-	-	-
Detection Head Size Dimension D(Ø)	-	-	-	-
Detection Head Size Dimension L2 (Range)(mm)	-	-	-	-
Detection Head Size Dimension W (Range)(mm)	-	-	-	-
Detection Head Size Dimension H (Range)(mm)	-	-	-	-
Protection Structure (IEC)	-	-	-	-
Protection Structure (DIN40050-9)	-	-	-	-

Filter by:

Narrow search by specifying spec./dim.

Sensor Shape
- Thread Type
- Cylinder Shape
- Square Type
- Groove Type
Images

Clear

Detection Distance L1(mm)
0.2

0.6

0.8

1

1.2

1.5

2

2.5

3

4

5

6

7

8

9

10

11

12

14

15

16

18

20

22

23

25

30

40

50

60

70

75

80

100

120

200

250

300

400

500

550

700

800

1000

1500

2000

2500

3000

3500

4000

5000

6000
The detecting distance can vary with your amplifier, operating environment and the detected object.
Drawing

Clear

Detection distance L1 [classification](mm)
- Up to 1
- Up to 2
- Up to 3
- Up to 5
- Up to 10
- Up to 20
- Up to 50
- Up to 100
- More than 100
* "Up to 2" represents over 1, and 2 or less.

Drawing

Clear

Detection Object
- Magnetically Permeable Metal
- Nonmagnetic Metal
- Non-Metal (Capacitance Type)
Clear

Operating Environment
- Standard
- Space Saving
- Heat Resistant
- Sputter Resistant
- Chemical Resistant
- Aluminum Chips
- Oil Resistance Strengthened
- Cold Resistant
- Water-proof, Drip-proof
Clear

Shield
- Shield
- Non Shield
Details

Clear

Detection Type
- Front Surface Detection
- Side Detection
Images

Clear

Sensor Case Material
- Stainless Steel
- Brass (Fluorine Coating)
- Brass (Nickel Plating)
- Polyarylate Resin
- PBT Resin
- ABS Resin
- Fluororesin
- Polycarbonate
- Stainless Steel (EN 1.4305 Equiv.) Fluororesin Coating
- Aluminum Diecast
- Stainless Steel
- Stainless Steel
- Brass
- Zinc
- Nylon, polyamide PA6
Clear

Sensor Detection Surface Material
- Stainless Steel
- Polyarylate Resin
- PBT Resin
- Fluororesin
- ABS Resin
- Stainless Steel (EN 1.4305 Equiv.) Fluororesin Coating
- Epoxy Resin
- Polyester
Clear

Amplifier
- Built-in Type
- Separated Type
- Relay Type
- Amplifier Only
Details

Clear

Detection Head Size Dimension M
- M5
- M8
- M12
- M18
- M30
- M4
Drawing

Clear

Detection Head Size Dimension D(Ø)
3

4

4.5

5

5.4

6.5

8

10

11

12

14

16.3

18

21

22

28.3

30

34

40

47.5

50

65

73

75

85

160

-
Drawing

Clear

Detection Head Size Dimension L2 (Range)(mm)
- 10 to 20
- 20.1 to 30
- 30.1 to 40
- 40.1 to 50
- 50.1 to 60
- 60.1 to 70
- 70.1 or More
Drawing

Clear

Detection Head Size Dimension W (Range)(mm)
- 5.1 to 10
- 10.1 to 15
- 15.1 to 20
- 20.1 to 30
- 30.1 to 40
- 40.1 or More
Drawing

Clear

Detection Head Size Dimension H (Range)(mm)
- 5.1 to 10
- 10.1 to 20
- 20.1 to 30
- 30.1 to 40
- 40.1 or More
Drawing

Clear

Protection Structure (IEC)
- IP50
- IP64
- IP65
- IP66
- IP67
- IP68
- IP40
Clear

Protection Structure (DIN40050-9)
- IP69K
Clear

Narrow search by specifying Brand

- MISUMI (3)
- Cost Efficient Products ()
- OMRON (36)
- PEPPERL+FUCHS (28)
- IFM ELECTRONIC (25)
- FESTO (14)
- ZF SWITCHES & SENSORS (6)
- GANTER (4)
- HALDER (4)
- SIEMENS (4)
- FAG (2)
- CONTRINEX (1)
- PANASONIC (1)
- DATALOGIC (1)
Clear