IMAO CORPORATION Clamping Levers

Resin type cam lever. With adjustment ring (with adjustment), the tightening force and the operating position of the lever can be adjusted arbitrarily.[Features]· Curved design of the entire lever part gives a comfortable grip feeling.· ECL type. By rotating the knurled adjustment ring, the tightening force and lever operating position can be adjusted arbitrarily.· Fine adjustment is possible without using tools

Lever with curves coordinated design. .Even though the lever part is free, when the lever is pushed down, the serrations can be engaged with each other, so it is possible to prevent contact malfunction after tightening.[Features]· Curved design of the entire lever part gives a comfortable grip feeling.· We accept additional work

In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Mini type with small turning radius.

In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. The standard type that boasts steady popularity.

Standard type cam lever.

Once screwed in proper position, clamping / unclamping can be done by lever up / down operation. Excellent rust prevention stainless steel type.

Machine lever for tightening and loosening screws without tools.[Features]・ In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged.・ After tightening, you can turn the lever freely to any position.・ Can be used in tight places where a lever cannot be turned 360°. ・ After screw tightening, the lever can be moved to an arbitrary position.・ Main unit available in 4 colors (silver, black, red and orange).[Applications]・ For position-adjusting parts, such as slides and slotted holes, etc.

[Features]· Since the screw part rotates in the male screw type, the direction of the lever can be adjusted arbitrarily.

[Features]· Standard type lever handle that can be used widely.· For grip, PC type door knob is used

Ball and spring for snap method. Besides the CL lever, ECL lever or EGK grip knob can be used.[Features]· Optional items for the snap method of the below items.· ECL ergo controller lever.· CL controller lever.· EGK ergo grip knob

Normally, when the lever part is in the free state, pressing the lever pushes the serration into mesh and operation is possible. It is possible to prevent contact malfunction after tightening.[Features]· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.· Besides the door knob, all is made from stainless steel, so it is robust and strong.· In the push lock type, where the gear is used by pressing the lever, when the hand is released, the built-in spring allows the lever to return to its original position and rotate freely again, and it is safe from any incorrect handling

Lever with curves coordinated design. Normally, the lever part is free, and when the lever is pushed down, the serration can be engaged and operated,which prevents incorrect handling after tightening.[Features]· Curved design of the entire lever part gives a comfortable grip feeling.· Initial tightening work can be done comfortably as the knurling is applied on the lower part of the mail body.· The standard color of the button is orange, however, black, gray, yellow, light blue, and red are also accepted as customized orders.· We accept additional work

Lever with curves coordinated design. .Even though the lever part is free, when the lever is pushed down, the serrations can be engaged with each other, so it is possible to prevent contact malfunction after tightening.

A gentle curve of the arm and polyamide lever handle give a gentle feel to the hands due to the hemispherical finish at the tip.[Features]· A gentle curve of the arm and a hemispherical finish of the tip gives a gentle hand grip, enabling a smooth and powerful operation.· The boss hole can be easily covered with the accessory cap after installation.· Pilot holes are processed.· ECL32 to 54 can be used in a snap system by installing the optional ball & spring.· A groove is provided in the boss for the stop pin that limits the lever operating angle to an angle of 125 ±1°

With this stainless steel lever handle, the serration that was engaged becomes loose by pulling up on the lever. All stainless steel type and stainless steel screw parts types are available.

By using the optional CLB, you can also use the snap method with this lever handle.[Features]· The boss hole can be easily covered with the center plate accessory after installation.· Optional ball & spring can be installed, and snap method can be used.· In order to limit the lever operating angle to 125 ±1°,the groove for the snap pin is provided in the boss.· For grip, PG type is used

[Features]· Standard type lever handle that can be used widely.· For grip, PG type is used

In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Large clamping force can be obtained because the lever part is long.[Features]· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.· Besides the door knob, all parts are made from stainless steel, so it is robust and strong

Zinc die casting lever handle that is widely used. There is a round hole type and a square hole type.

In this type, when the lever is pulled the serrations mesh and the lever becomes free. Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.[Features]· Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.· If interference of the lever occurs during operation, a short lever can be installed and used

[Features]·EN 1.4301 Equiv. (gesintert), which has excellent rust prevention, is used.

Polyamide lever handle which can be widely used. Main feature is curved design.

[Features]· When the lever is pulled, the serrations mesh and lever handle becomes free.· The upper part of the boss protrudes, and the lever lifting is easy.

All SCM made, this ratchet type lever handle appears heavy.[Features]· Powerful ratchet lever that works in both forward and reverse directions.· Demonstrates good strength when working in narrow places

[Features]· Clamp lever with torque setting function / lever position can be changed.· Tightening torque can be set.· When the set torque is reached, there is a click feeling that confirms completion of tightening.