MISUMI Carbide Radius End Mills（work material：Stainless Steel）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
TSC series carbide radius end mill, 2-flute / regular model
MISUMI
[Features]
General 2-flute cutter with regular flute length and flute radius
-Radius cutting edge also effectively suppresses chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
XAL series carbide radius end mill, 4-flute / short model
MISUMI
The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes- Volume Discount
- XAL
- General Steel
- 4 Flutes
Starting from∗ ： 18.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide long neck radius end mill, 2-flute, long neck model
MISUMI
Long neck radius that can be used as a ball and allows a large pick feed- Volume Discount
- TS
- General Steel
- 2 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
MISUMI
Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Starting from∗ ： 117.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model
MISUMI
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Starting from∗ ： 111.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
MISUMI
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Starting from∗ ： 89.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Starting from∗ ： 93.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 4-flute / stub model
MISUMI
A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Starting from∗ ： 57.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
MISUMI
3-flute 45° helix radius that's resistant to chattering is available at an affordable price- Volume Discount
- XAL
- General Steel
- 3 Flutes
Starting from∗ ： 23.73 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
MISUMI
4-Flute Radius for High-Efficiency and High-Speed Machining- Volume Discount
- XAL
- General Steel
- 4 Flutes
Starting from∗ ： 23.73 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL series carbide radius end mill, 2-flute / short model
MISUMI
Radius end mills are available at low prices- Volume Discount
- XAL
- General Steel
- 2 Flutes
Starting from∗ ： 14.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible
-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter
-Multi-use for engraving, side face, rough and medium grinding.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Starting from∗ ： 84.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining
-Multi-faceted type that can be used for engraving, side face, rough and medium grinding
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Starting from∗ ： 79.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
MISUMI
[Features]
-High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners
-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners
-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
Starting from∗ ： 61.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Multi-purpose for engraving, side face, rough and medium finishing
-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Starting from∗ ： 54.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Variable design that can be used for engraving, side faces, coarse and medium finish
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the machine, what services it offers, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Starting from∗ ： 74.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
MISUMI
Long neck type with interference prevention can be selected from a number of effective lengths- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Starting from∗ ： 88.68 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
MISUMI
[Features]
-Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders
-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges
-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Starting from∗ ： 73.40 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model
MISUMI
[Features]
-Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders
-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 cutting edges
-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Starting from∗ ： 78.99 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
-Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges
-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 3-flute, 45° spiral / short model
MISUMI
[Features]
-The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling
-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes
-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
-Radius multi-function cutter
-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving
-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes
-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-Radius flute is also effective in suppressing chips.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]
-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes
-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter
-Long shank is ideal for milling deep cavities
-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Starting from∗ ： 73.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 4-flute, 45° spiral / stub model
MISUMI
[Features]
-Radius end mill
-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges
-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-Radius cutting edge is also effective in suppressing chipping
-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same time- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute, 45° spiral / short model
MISUMI
[Features]
-Multi-function end mill with radius
-Unique chip groove shape allows cutting of grooves with a depth of cut equal to that of 2 flutes
-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute, 45°, regular model
MISUMI
[Features]
-Radius multi-function cutter
-Unique chip shape enables flute cutting with a depth of cut equal to that of 2 cutting edges
-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast
-Radius cutting edge also effectively suppresses chipping
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, pricing, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 2-flute stub model
MISUMI
[Features]
-Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder
-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Starting from∗ ： 36.28 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
-Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 2-flute / short model
MISUMI
[Features]
-Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute / stub model
MISUMI
[Features]
-Designed with optimum blade length, shank length and overall length considering processing with shrink holder
-Can be resharpened. Please refer to the "Regrinding Service" page for information on possible applications, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Starting from∗ ： 43.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 4-flute / stub model
MISUMI
[Features]
-Short cutting edge length with cutting edge radius fitted to a general purpose 4 flute cutter
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute / short model
MISUMI
[Features]
-Short cutting edge length with cutting edge radius attached to a general purpose cutter with 4 cutting edges
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute / regular model
MISUMI
[Features]
-Regular cutting edge length with cutting edge radius fitted to a general purpose cutter with 4 cutting edges
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
MISUMI
[Features]
-Multi-functional long neck radius with high feed rate and excellent durability
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide long neck radius end mill, 4-flute / long neck model
MISUMI
[Features]
-Radius (R)-accuracy of ±5 µm (compared to manufacturer's measurements) enables high-precision milling of deep cavities
-By adopting 4-spiral shape, it is possible to work with high feed setting compared to 2-spiral shape
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
MISUMI
[Features]
-Suppresses chattering with a short flute length and a tapered shape at the peripheral edge
-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
MISUMI
By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Starting from∗ ： 83.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Conical neck effectively suppresses chatter
-Variable design that can be used for engraving, side face, rough and medium grinding
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Starting from∗ ： 97.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model
MISUMI
The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Starting from∗ ： 96.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model
MISUMI
[Features]
-High helix angle and radius end mill for machining high hardness steel
-High tool rigidity minimises tool tilt when side milling
-Machining high hardness steel up to 65HRC is possible
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- Multi-Flutes （5 ~）
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 3-flute, 45° spiral / short model
MISUMI
The popular radius type for stainless steel processing is also effective in preventing chipping- Volume Discount
- TS
- SUS
- 3 Flutes
- S (Short)
Starting from∗ ： 96.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-The long neck type is ideal for milling deep pockets, etc.
-Multi-use for engraving, side faces, R, coarse and medium finish
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Starting from∗ ： 86.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
MISUMI
[Features]
-Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments
-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.- Non-Coated
- General Steel
Min. Shipping Days ： 7 Days -
XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° radius end mill capable of high-speed and high-efficiency machining- Volume Discount
Starting from∗ ： 86.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model
MISUMI
Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining- Volume Discount
Starting from∗ ： 17.06 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Overall Length (L)(mm) |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | TSC series carbide long neck radius end mill, 2-flute, long neck model | XAL series carbide radius end mill, 3-flute, 45° torsion / regular model | XAL series carbide radius end mill, 4-flute, 45° torsion / regular model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model | TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model | TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model | TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, 3-flute, 45° spiral / short model | TSC series carbide radius end mill, 3-flute, 45° spiral / regular model | TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model | TSC series carbide radius end mill, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, 4-flute, 45° spiral / short model | TSC series carbide radius end mill, 4-flute, 45°, regular model | TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model | TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model | TSC series carbide long neck radius end mill, 4-flute / long neck model | TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model | TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model | TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model | TSC series carbide radius end mill, 3-flute, 45° spiral / short model | TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model | Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill | XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model | |||||||||||||||||
| Starting from∗ | - Volume Discount | 18.89 € *Unit price with basic configuration Volume Discount | - Volume Discount | 117.55 € *Unit price with basic configuration Volume Discount | 111.66 € *Unit price with basic configuration Volume Discount | 89.61 € *Unit price with basic configuration Volume Discount | 93.03 € *Unit price with basic configuration Volume Discount | 57.32 € *Unit price with basic configuration Volume Discount | 23.73 € *Unit price with basic configuration Volume Discount | 23.73 € *Unit price with basic configuration Volume Discount | 14.52 € *Unit price with basic configuration Volume Discount | 84.39 € *Unit price with basic configuration Volume Discount | 79.89 € *Unit price with basic configuration Volume Discount | 61.48 € *Unit price with basic configuration Volume Discount | 54.32 € *Unit price with basic configuration Volume Discount | 74.55 € *Unit price with basic configuration Volume Discount | 88.68 € *Unit price with basic configuration Volume Discount | 73.40 € *Unit price with basic configuration Volume Discount | 78.99 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 73.62 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 36.28 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | 43.32 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 83.63 € *Unit price with basic configuration Volume Discount | 97.30 € *Unit price with basic configuration Volume Discount | 96.21 € *Unit price with basic configuration Volume Discount | - Volume Discount | 96.98 € *Unit price with basic configuration Volume Discount | 86.79 € *Unit price with basic configuration Volume Discount | - | 86.33 € *Unit price with basic configuration Volume Discount | 17.06 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 7 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Blade diameter (D)(φ) | 1 ～ 20 | 3 ～ 20 | 0.2 ～ 6 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 2 ～ 6 | 3 ～ 12 | 4 ～ 12 | 1 ～ 12 | 2 ～ 12 | 2 ～ 12 | 3 ～ 12 | 2 ～ 12 | 2 ～ 20 | 4 ～ 16 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 20 | 3 ～ 22 | 3 ～ 12 | 3 ～ 20 | 3 ～ 20 | 2 ～ 12 | 1 ～ 12 | 1 ～ 20 | 2 ～ 12 | 1 ～ 12 | 1 ～ 12 | 1 ～ 12 | 1 ～ 4 | 1 ～ 6 | 0.2 ～ 3 | 3 ～ 12 | 3 ～ 12 | 2 ～ 6 | 6 ～ 12 | 3 ～ 12 | 4 ～ 12 | 1 ～ 20 | 4 ～ 12 | 2 ～ 20 |
| R Size(mm) | 0.1 ～ 3 | 0.1 ～ 3 | 0.05 ～ 1 | 0.813 ～ 2.438 | 0.813 ～ 2.607 | 0.813 ～ 2.438 | 0.813 ～ 2.438 | 0.2 ～ 0.5 | 0.2 ～ 2 | 0.2 ～ 2 | 0.1 ～ 3 | 0.5 ～ 2 | 0.5 ～ 2 | 0.75 ～ 3 | 0.5 ～ 2 | 0.5 ～ 3 | 1 ～ 3 | 0.3 ～ 1 | 0.3 ～ 1 | 0.5 ～ 1 | 0.3 ～ 2 | 0.2 ～ 2 | 0.2 ～ 2 | 0.5 ～ 1 | 0.2 ～ 3 | 0.2 ～ 3 | 0.2 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.3 ～ 1 | 0.1 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.2 ～ 1 | 0.05 ～ 1 | 0.05 ～ 0.5 | 0.8 ～ 2 | 0.8 ～ 2 | 0.2 ～ 0.5 | 0.5 ～ 2 | 0.5 ～ 2 | 1 ～ 2 | 0.1 ～ 3 | 0.2 ～ 1 | 0.2 ～ 3 |
| work material | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○/◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] |
| Blade length (ℓ)(mm) | 3 ～ 60 | 8 ～ 38 | 0.16 ～ 12 | 8 ～ 24 | 8 ～ 40 | 8 ～ 24 | 8 ～ 24 | 3 ～ 9 | 16 ～ 38 | 18 ～ 38 | 3 ～ 30 | 2 ～ 12 | 4 ～ 24 | 1.2 ～ 5 | 2 ～ 12 | 4 ～ 40 | 6 ～ 24 | 4.5 ～ 18 | 4.5 ～ 18 | 4.5 ～ 18 | 5 ～ 26 | 5 ～ 56 | 4.5 ～ 30 | 4.5 ～ 18 | 5 ～ 38 | 5 ～ 56 | 3 ～ 18 | 1.5 ～ 18 | 2 ～ 40 | 3 ～ 18 | 1.5 ～ 18 | 2 ～ 24 | 3 ～ 36 | 0.8 ～ 3.2 | 1.5 ～ 12 | 0.16 ～ 6 | 4.5 ～ 18 | 4.5 ～ 18 | 3 ～ 9 | 5 ～ 12 | 7 ～ 18 | 8 ～ 24 | 4 ～ 60 | 18 ～ 38 | 4 ～ 45 |
| Number of flutes(sheet) | 2 | 4 | 2 | 3 | 4 | 3 | 4 | 4 | 3 | 4 | 2 | 3 | 3 | 4 | 4 | 4 | 4 | 3 | 4 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 3 ～ 4 | 4 | 2 | 3 | 4 | 4 | 6 | 3 | 3 | 2 ～ 4 | 4 | 4 |
| Type | Radius | Radius | Long-Neck Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | Radius | Radius | Radius | Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | Long-Neck Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Long-Neck Radius | Long-Neck Radius | Tapered neck radius | Tapered neck radius | Tapered neck radius | High-Feed Radius | Radius | Radius | Long-Neck Radius | Radius | Radius | Radius |
| Overall Length (L)(mm) | 45 ～ 125 | 50 ～ 100 | 40 ～ 100 | 50 ～ 100 | 50 ～ 150 | 80 ～ 160 | 80 ～ 160 | 50 | 60 ～ 100 | 60 ～ 100 | 50 ～ 75 | 50 ～ 100 | 50 ～ 100 | 60 ～ 110 | 50 ～ 100 | 50 ～ 130 | 70 ～ 180 | 40 ～ 65 | 40 ～ 65 | 60 ～ 100 | 60 ～ 100 | 60 ～ 130 | 80 ～ 200 | 60 ～ 100 | 60 ～ 110 | 60 ～ 130 | 35 ～ 60 | 40 ～ 75 | 40 ～ 110 | 35 ～ 60 | 40 ～ 75 | 40 ～ 75 | 45 ～ 85 | 45 ～ 70 | 40 ～ 100 | 40 ～ 100 | 80 ～ 160 | 80 ～ 160 | 50 | 60 ～ 85 | 60 ～ 100 | 70 ～ 140 | 40 ～ 125 | 60 ～ 100 | 50 ～ 110 |
| Shank diameter (d)(mm) | 4 ～ 20 | 4 ～ 20 | 4 ～ 6 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 16 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 ～ 16 | 6 ～ 16 | 6 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 6 ～ 12 | 4 ～ 20 |
| Underneck length (ℓ1)(mm) | 23 ～ 55 | - | 1 ～ 40 | - | - | 35 ～ 108 | 35 ～ 108 | - | - | - | - | - | - | 7.5 ～ 24 | - | - | - | - | - | 14 ～ 68 | 18 ～ 70 | 26 ～ 92 | 10 ～ 18 | 14 ～ 68 | 18 ～ 73 | 26 ～ 92 | - | 14 ～ 45 | 17 ～ 45 | - | 14 ～ 45 | 17 ～ 45 | 23 ～ 55 | 6 ～ 30 | 3 ～ 40 | 1 ～ 60 | 24 ～ 105 | 24 ～ 105 | - | 11 ～ 55 | - | - | - | - | - |
| Machining Application | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts |
| Coating | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / Non-Coated | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | No torsion | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) |
| R Precision(μm) | ±0.01 ～ ±0.02 | ±0.02 | ±0.005 ～ ±0.01 | - | - | - | - | ±0.005 | ±0.02 | ±0.02 | ±0.02 | ±0.015 | ±0.015 | ±0.02 | ±0.015 | ±0.015 | ±0.015 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.005 ～ ±0.01 | ±0.005 ～ ±0.01 | ±0.005 ～ ±0.01 | ±0.02 | ±0.02 | ±0.005 | ±0.02 | ±0.02 | ±0.015 | ±0.02 | ±20 | ±0.02 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Blade diameter (D)(φ)
-
R Size(mm)
-
work material
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Type
- Radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Overall Length (L)(mm)
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Brand
-
- MISUMI (50)
- OSG (22)
- NS TOOL (12)
- NACHI(FUJIKOSHI) (7)
- KYOWA SEIKO (5)
- UNION TOOL (5)
- 7 LEADERS (4)
- SANKO MFG (4)
- DIJET (3)
- OKAZAKI SEIKO (3)
- THE CUT (2)
- VAN_HOORN (2)
- ATOM (1)
- GUHRING (1)
- SPEED TIGER (1)
- SANDVIK (1)
- WATERMILLS (0)
- TAIYO-TOOL (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Carbide Radius End Mills
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.