MISUMI Screw-Hole-Related Tools（Hole type：For blind hole）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Carbide Hand Tap

MISUMI

[Features]
-Hand taps made from uncoated carbide
-Can be used for both blind holes and through holes
-Suitable for mass production of taps for various cast irons.

Volume Discount

Starting from^∗ ：	34.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

Threading cutters that enable the high-speed stable processing are available at special prices

Volume Discount

Starting from^∗ ：	112.49 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

MISUMI

[Features]
-Carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for non-steel metals such as aluminium and copper.

Volume Discount

Starting from^∗ ：	115.44 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

MISUMI

The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.

Volume Discount

Starting from^∗ ：	222.23 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.

Volume Discount

Starting from^∗ ：	181.78 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

TS Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

[Features]
--Tungsten carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-
-It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

Starting from^∗ ：	181.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiN Coated High-Speed Steel Spiral Tap

TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】

MISUMI

The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available

Volume Discount

Starting from^∗ ：	14.80 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Hand Tap

High-Speed Steel Hand Tap【10 Pieces Per Package】

MISUMI

[Features]
A general purpose hand tap made from uncoated high speed steel
High versatility, suitable for a wide range of applications and materials such as aluminium and general steel.

Volume Discount

Starting from^∗ ：	34.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

MT Series High-Speed Steel Spiral Tap

MISUMI

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Volume Discount

Starting from^∗ ：	7.92 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

TiN Coated High-Speed Steel Roll Tap

TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】

MISUMI

[Features]
-Used for tapping that produces no chips
-Suitable for a wide range of materials, from general steel to non-ferrous alloys
-Excellent abrasion resistance and chip weld resistance due to TiN coating.

Starting from^∗ ：	56.10 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Spiral Tap

MISUMI

[Features]
-Carbide tap with uncoated spiral flute
-Can be used for machining blind holes
-Suitable for mass production of aluminium and copper alloys

Volume Discount

Starting from^∗ ：	34.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

MISUMI

[Features]
-Multi-use tap for all materials from general steel, heat treated steel to stainless steel
-Efficient chip removal due to short thread form and special flute shape.

Volume Discount

Starting from^∗ ：	52.89 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Spiral Tap

High-Speed Steel Spiral Tap【10 Pieces Per Package】

MISUMI

[Features]
-High speed uncoated steel tap with spiral flutes
-Suitable for machining blind holes
-Effective for materials with continuous chips such as carbon steel and steel alloys.

Volume Discount

Starting from^∗ ：	74.25 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

									Promotional pricing
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Carbide Hand Tap	TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads	DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model	TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads	TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads	TS Coated Carbide Threading Cutter, for Internal Metric Threads	TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】	High-Speed Steel Hand Tap【10 Pieces Per Package】	MT Series High-Speed Steel Spiral Tap	TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】	Carbide Spiral Tap	Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】	High-Speed Steel Spiral Tap【10 Pieces Per Package】
Starting from^∗	34.46 € *Unit price with basic configuration Volume Discount	112.49 € *Unit price with basic configuration Volume Discount	115.44 € *Unit price with basic configuration Volume Discount	222.23 € *Unit price with basic configuration Volume Discount	181.78 € *Unit price with basic configuration Volume Discount	181.83 € *Unit price with basic configuration Volume Discount	14.80 € *Unit price with basic configuration Volume Discount	34.59 € *Unit price with basic configuration Volume Discount	7.92 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	56.10 € *Unit price with basic configuration	34.46 € *Unit price with basic configuration Volume Discount	52.89 € *Unit price with basic configuration Volume Discount	74.25 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	5 Days	5 Days	5 Days	7 Days	7 Days	5 Days	5 Days	5 Days	Same day	5 Days	5 Days	5 Days	5 Days
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	M3 ～ M10	M3 ～ M20	M3 ～ M16	M2 ～ M12	M1.4 ～ M20	M3 ～ M12	M3 ～ M10	M3 ～ M10	M2 ～ M24	M3 ～ M10	M3 ～ M10	M2 ～ M12	M2 ～ M12
Pitch (P), Number of Threading(mm)	0.5 ～ 1.5	0.5 ～ 2.5	0.5 ～ 2	0.4 ～ 1.75	0.3 ～ 2.5	0.5 ～ 1.75	0.5 ～ 1.5	0.5 ～ 1.5	0.4 ～ 3	0.5 ～ 1.5	0.5 ～ 1.5	0.4 ～ 1.75	0.4 ～ 1.75
Chamfer threads (Lcf)	1.5 P ～ 3 P	-	-	-	-	-	1.5 P ～ 2.5 P	1.5 P ～ 9 P	2.5 P	2 P ～ 4 P	1.5 P ～ 2.5 P	2.5 P	2.5 P
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Cobalt HSS	Vanadium High-Speed Steel	Carbide	Powder high-speed steel	Vanadium High-Speed Steel
work material	Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]
Tap Type	Hand Tap	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Spiral Tap	Hand Tap	Spiral Tap	Roll tap	Spiral Tap	Spiral Tap	Spiral Tap
Hole type	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole
Coating Y/N	N/A	Available	Available	Available	Available	Available	Available	N/A	N/A	Available	N/A	N/A	N/A
Coating Type	-	TiAlN	DLC	TiAlN	TiAlN	For High Hardness (Silicon Group)	TiN	-	Non-Coated	TiN	-	-	-
Overall Length (L)(mm)	46 ～ 75	57 ～ 115	57 ～ 92	58 ～ 73	39 ～ 105	48 ～ 74	46 ～ 150	46 ～ 75	40 ～ 120	46 ～ 75	46 ～ 75	40 ～ 82	40 ～ 82

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Miniature
- Other
Clear

Screw size (Nominal)
CTG-22

CTG-16

No0UN

NO.0-80UNF

No.10

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

NO.12-28UNF

NO.12-24UNC

S0.2

NO.2-64UNF

NO.2-56UNC

No.2-56UNC

S0.3

NO.3-56UNF

NO.3-48UNC

No.4

S0.4

NO.4-48UNF

NO.4-40UNC

No.4-40UNC

S0.5

NO.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

S0.6

NO.6-40UNF

No.6-32UNC

S0.7

S0.8

NO.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1UN

1UNS

G1

G 1"

M1

NPS1

NPT1

NPTF1

No1UN

PF1

PF 1

R1

Rp1

S1

UNC 1

UNC 1"

UNF 1"

W1

1´-11

1′-11

1-8UNC

1'-8UNC

G1"-3"

1"1/2UN

G1"1/2

NPS1"1/2

NPT1"1/2

R1"1/2

Rp1"1/2

W1"1/2

1′1/2-11

1 1/2-8UN

1"1/4UN

G1"1/4

NPS1"1/4

NPT1"1/4

R1"1/4

Rp1"1/4

W1"1/4

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1"1/16UN

1/2

1/2UN

G1/2

G 1/2

NPS1/2

NPT1/2

NPTF1/2

PF 1/2

R1/2

Rc1/2

Rp1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-14

1/2-13UNC

G1/2 5/8

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1 3/4-8UN

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

G1/4

G 1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PF 1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

W1"5/8

1 5/8-8UN

W1"7/8

1 7/8-8UN

1/8

G1/8

G 1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M1.7

M1.8

2UN

G2

M2

M2.0

NPS2

NPT2

No2UN

R2

Rp2

UNC 2

UNF 2

W2

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

W2"1/4

M2.2

M2.3

M2.5

M2.6

EGM 3

G3

M3

M3.0

No3UN

R3

Rp3

UNC 3

UNF 3

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

G 3/4

NPS3/4

NPT3/4

NPTF3/4

PF 3/4

R3/4

Rp3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-14

3/4-10UNC

3/8UN

G3/8

G 3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PF 3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 - M10

M3～10

M3 - M12

SM3/16

W3/16

M3 - M18

SM3/32

M3.5

EGM 4

G4

M4

M4.0

MF4

No4UN

R4

Rp4

UNC 4

UNF 4

№4-40UNC

M4～6

M4.5

EGM 5

M5

M5.0

MF5

No5UN

UNC 5

№5-40UNC

5/8UN

G5/8

G 5/8

R5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

G5/8 3/4

M5 - M12

M5～13

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

M5.5

EGM 6

M6

M6.0

MF6

No6UN

UNC 6

UNF 6

UNJC 6

№6-32UNC

M7

MF7

PG7

7 execution M3 - M12

7/8UN

G7/8

G 7/8

R7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

7/16-20UNF

7/16-14UNC

SM7/32

M7.5

EGM 8

M8

MF8

No8UN

UNC 8

UNF 8

UNJC 8

№8-32UNC

M9

PG9

9/16

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

SM9/32

SM9/64

M9.5

EGM 10

M10

MF10

No10UN

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M10～25

M11

SM11/32

SM11/64

EGM 12

M12

MF12

Mf12

No12UN

UNC 12

UNF 12

M12 x 1.5

M13

PG13.5

M14

MF14

M15

SM15/64

M16

MF16

Mf16

M16 x 1.5

M17

M18

MF18

M19

M20

MF20

Mf20

M20 x 1.5

M21

M22

MF22

M23

M24

MF24

M25

MF25

Mf25

M25 x 1.5

M26

MF26

M27

MF27

M28

MF28

M30

MF30

M32

Mf32

M33

M34

M35

M36

M37

M38

M39

M40

M42

M45

M48

M52

M56

M64
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

1.5-Shaped

1.5 P

1.5P

2 P

2P

2.5

2.5 P

2.5P

3 P

3P

4 P

4P

4.5P

5

5 P

5P

6P

8P

9 P

9P

24P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-Cutting-Related Tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

38

39

40

41

42

44

44.5

45

46

47.62

47.625

48

49.21

50

50.8

51

52

53

53.975

53.98

54

55

55.28

55.64

55.92

56

57

58

59

59.5

60

60.32

60.325

61

62

62.52

62.65

63

63.5

64

65

66

67

68

69

69.06

69.063

69.42

69.71

70

72

73

74

74.61

74.625

75

76

78

79

79.03

79.31

80

80.17

82

83

84

85

85.72

87

88

89

89.12

89.18

90

91

91.28

92

95

96

96.84

98.97

99.21

100

101

102

104

105

108

109

109.65

110

111

112

113.5

115

118

119

120

121

125

130

130.175

130.2

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

224

225

250

300

310

315

460
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (13)
- Cost Efficient Products ()
- OSG (112)
- YAMAWA MFG (35)
- CARMEX (32)
- NACHI(FUJIKOSHI) (4)
- SANDVIK (3)
- GUHRING (2)
- NOGAJAPAN (2)
- TRUSCO NAKAYAMA (2)
- H & H (1)
- NS TOOL (1)
- RUKO (1)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- TANOI MFG (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- SKC (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- REX TOOLS (0)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

MISUMI Screw-Hole-Related Tools（Hole type：For blind hole）

Search by sub-category

Carbide Hand Tap

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

TS Coated Carbide Threading Cutter, for Internal Metric Threads

TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】

High-Speed Steel Hand Tap【10 Pieces Per Package】

MT Series High-Speed Steel Spiral Tap

TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】

Carbide Spiral Tap

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

High-Speed Steel Spiral Tap【10 Pieces Per Package】

Filter by:

Stock

Narrow search by specifying spec./dim.

Screw Types

Screw size (Nominal)

Pitch (P), Number of Threading(mm)

Chamfer threads (Lcf)

Tool Material Type

work material

Tap Type

Hole type

Coating Y/N

Coating Type

Overall Length (L)(mm)

Narrow search by specifying Brand

Narrow search by specifying CAD data type

Categories related to Screw-Hole-Related Tools

Método de pagamento

Fabrico a pedido

Alterar Vista

Certificados

A MISUMI pelo mundo

Redes sociais

Aviso legal