MISUMI Chamfer, V-Grooves（work material：Aluminum）

[Features] -Ideal for chamfers and V-grooves-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.

Capable of everything from positioning to chamfering in a single shot

The chamfer angle can be selected from 60, 90 and 120°according to the machining style

[Features] -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

[Features] -Ideal for chamfering. Can also be used as a deburring tool-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.

[Features] -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).-Peripheral grooves allow bevel, contour and spiral cutting-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type-With helix angle on peripheral flutes-Can also be used as a deburring tool-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

The sharp helix blade achieves the clean machined surface with less burr

Chamfering end mill with the angle that can be freely selected in 1° increments

[Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

Ideal for the Deep Chamfering of Workpieces

[Features] Easy high-quality machining of corner radii-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

[Features]・Popular chamfering product with helix angle.・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

[Features]・Machining from positioning to chamfering with a single tool.

[Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

[Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.

[Features]・An essential item for corner rounding.