MISUMI Linear Shafts（Shaft end Shape (Right)：Internal thread）
Narrow search by specifying Basic Shape
-
Solid -
Solid, One End Stepped -
Solid, Both Ends Stepped -
Hollow -
Hollow, One End Stepped -
Hollow, Both Ends Stepped
?* Information on days to ship and prices
-
Linear shafts / double-sided internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Min. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides, internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / internal thread / undercut / flat / radial bore
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / two-sided internal thread / spanner flat, radial bore
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / internal thread on both sides / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / hollow / double-sided internal thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 7 Days -
Linear shafts / double-sided female thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 7 Days -
Linear shafts / stepped on one side / external thread / internal thread / conical
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / two-sided internal thread / stepped on one side / internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / steel / surface hardened, nickel plated / end forms selectable
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 9 Days -
Min. Shipping Days ： 9 Days -
Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / one-sided, two-sided internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / stepped on both sides / external thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 9 Days -
Linear shafts / stepped on one side / external thread / internal thread / double end thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 7 Days -
Linear shafts / stepped on both sides / internal thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / internal thread / spanner flat / radial bore
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / hollow / external thread on one side, internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 7 Days -
Linear shafts / material selectable / treatment selectable / stepped on one side / two-sided internal thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / undercut / flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / wrench flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / internal thread on both sides / wrench flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / stepped on both sides / internal thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / stepped on both sides / internal thread / undercut / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 9 Days -
Linear shafts / offset on one side / external thread / internal thread / undercut / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 9 Days -
Linear shafts / stepped on one side / external thread / internal thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / internal thread / wrench flat / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / hollow / stepped on one side / internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 7 Days -
Linear shafts / material selectable / treatment selectable / double stepped on one side / external thread / internal thread / undercut
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / internal thread on one side / internal thread on both sides / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / steel / stainless steel / treatment selectable / stepped on one side / two-sided internal thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 9 Days -
Linear shafts / internal thread on one side / internal thread on both sides / h6 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 20 mm / [ISO-Tolerance] h6.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / offset on one side / external thread / internal thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 9 Days -
Linear shafts / set on one side / external thread / internal thread / undercut
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / undercut / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / double stepped on one side / external thread / internal thread / undercut / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / internal thread on both sides / wrench flat / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Min. Shipping Days ： 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| RoHS Information |
| Basic Shape |
| Features, Areas of application |
| Shaft end Shape (Left) |
| Shaft end Shape (Right) |
| Tightening Type |
| Shaft end Perpendicularity |
| [D] Diameter (Shaft)(mm) |
| Material |
| Heat Treatment |
| Surface Treatment |
| ISO Tolerance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Linear shafts / two-sided internal thread / spanner flat, radial bore | Linear shafts / internal thread on both sides / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / hollow / double-sided internal thread / spanner flat | Linear shafts / stepped on one side / external thread / internal thread / conical | Linear shafts / steel / surface hardened, nickel plated / end forms selectable | Linear shafts / stepped on one side / external thread / internal thread / double end thread | Linear shafts / stepped on both sides / internal thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / hollow / external thread on one side, internal thread | Linear shafts / offset on one side / external thread / internal thread / undercut / spanner flat | Linear shafts / stepped on one side / external thread / internal thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on both sides / internal thread / wrench flat / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / hollow / stepped on one side / internal thread | Linear shafts / internal thread on one side / internal thread on both sides / h6 / Cf53 / EN 1.1213 | Linear shafts / offset on one side / external thread / internal thread / spanner flat | Linear shafts / set on one side / external thread / internal thread / undercut | |||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Min. Shipping Days ： | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 7 Days | 7 Days | 4 Days | 4 Days | 9 Days | 9 Days | 4 Days | 4 Days | 9 Days | 7 Days | 4 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 9 Days | 9 Days | 4 Days | 4 Days | 7 Days | 4 Days | 4 Days | 9 Days | 4 Days | 9 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| RoHS Information | - | - | - | - | - | - | - | - | RoHS requirements fulfilled | - | RoHS requirements fulfilled | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Basic Shape | Solid | Solid / Solid, One End Stepped / Solid, Both Ends Stepped | Solid, Both Ends Stepped | Solid | Solid | Solid | Hollow | Solid | Solid / Solid, One End Stepped | Solid, One End Stepped | Solid | Hollow / Hollow, One End Stepped / Hollow, Both Ends Stepped | Solid | Solid | Solid, One End Stepped | Solid | Solid, Both Ends Stepped | Solid | Hollow | Solid, One End Stepped | Solid, One End Stepped | Solid, One End Stepped | Solid | Solid, Both Ends Stepped | Solid, Both Ends Stepped | Solid | Solid, One End Stepped | Solid, Both Ends Stepped | Hollow, One End Stepped | Solid, One End Stepped | Solid, One End Stepped | Solid, One End Stepped | Solid | Solid | Solid | Solid, One End Stepped | Solid, One End Stepped | Solid, One End Stepped |
| Features, Areas of application | - | - | - | - | - | - | - | - | Not applicable | - | Not applicable | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft end Shape (Left) | Internal thread | Straight / Internal thread / External thread / Retaining ring grooves / Hex socket / Taper | Internal thread | External thread | Internal thread | Internal thread | Internal thread | Internal thread | Taper | Straight / Internal thread | Internal thread | Straight / Internal thread / External thread / Retaining ring grooves | External thread | Internal thread | External thread | Straight / Internal thread / External thread | Internal thread | External thread | External thread | Internal thread | External thread | External thread | Internal thread | Internal thread | Internal thread | External thread | External thread | Internal thread | Straight | External thread | Straight / Internal thread | Internal thread | Internal thread | External thread | External thread | External thread | External thread | Internal thread |
| Shaft end Shape (Right) | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread | Internal thread |
| Tightening Type | - | - | - | - | - | No machining | - | - | - | - | - | - | - | - | - | - | No machining | - | - | - | Wrench flats / Cross-drilled hole | Wrench flats / Cross-drilled hole | Wrench flats / Cross-drilled hole | - | - | - | No machining | Wrench flats | - | - | No machining | - | No machining | - | - | No machining | No machining | Wrench flats |
| Shaft end Perpendicularity | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | - | 0.03 | 0.2 | 0.2 | 0.2 | - | 0.2 | 0.2 | 0.03 | 0.2 | 0.2 | 0.2 | - | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.03 | 0.03 | 0.2 | 0.2 | - | 0.2 | 0.2 | 0.03 | 0.2 | 0.03 | 0.2 | 0.2 | 0.2 | 0.2 |
| [D] Diameter (Shaft)(mm) | 4 ～ 50 | - | 8 ～ 50 | 8 ～ 50 | 6 ～ 50 | 6 ～ 30 | 6 ～ 50 | 4 ～ 30 | 6 ～ 50 | 8 ～ 50 | 8 ～ 50 | - | 4 ～ 50 | 6 ～ 20 | 4 ～ 30 | 15 ～ 50 | 8 ～ 30 | 6 ～ 50 | 6 ～ 40 | 8 ～ 50 | 8 ～ 30 | 6 ～ 30 | 6 ～ 30 | 8 ～ 50 | 8 ～ 30 | 8 ～ 30 | 6 ～ 30 | 8 ～ 30 | 6 ～ 50 | 8 ～ 50 | 8 ～ 30 | 8 ～ 30 | 6 ～ 20 | 5 ～ 30 | 8 ～ 50 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 |
| Material | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel | Alloyed Steel | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Unalloyed Steel | Alloyed Steel | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel |
| Heat Treatment | No Treatment / Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | No Treatment / Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened |
| Surface Treatment | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | Electroless Nickel Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / LTBC Plating | No Treatment / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating |
| ISO Tolerance | h5 ～ f8 | h5 ～ g6 | h5 ～ f8 | h5 ～ f8 | h5 ～ f8 | h6 ～ h7 | g6 | g6 | h5 ～ f8 | h5 ～ f8 | g6 | g6 | h5 ～ f8 | g6 | g6 | g6 | h6 ～ h7 | h5 ～ f8 | g6 | h5 ～ f8 | h6 ～ h7 | h6 ～ h7 | h6 ～ h7 | h5 ～ f8 | g6 | g6 | h6 ～ h7 | h6 ～ h7 | g6 | h5 ～ f8 | h6 ～ h7 | g6 | h6 | g6 | h5 ～ f8 | h6 ～ h7 | h6 ～ h7 | h6 ～ h7 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
RoHS Information
-
Features, Areas of application
-
Shaft end Shape (Left)
-
Straight -
Internal thread -
External thread -
Set screw groove -
Retaining ring grooves -
Keyway -
Hex socket -
Taper
-
-
Shaft end Shape (Right)
-
Straight -
Internal thread -
External thread -
Set screw groove -
Retaining ring grooves -
Hex socket -
Taper -
Positioning Hole and internal thread
-
-
Tightening Type
- No machining
- Wrench flats
- Cross-drilled hole
-
Shaft end Perpendicularity
- 0.2
- 0.03
-
[D] Diameter (Shaft)(mm)
-
Material
- Unalloyed Steel
- Stainless Steel (austenitic)
- Alloyed Steel
- Stainless Steel (martensitique)
-
Heat Treatment
- No Treatment
- Induction Hardened
-
Surface Treatment
- No Treatment
- Hard Chrome Plating
- LTBC Plating
- Electroless Nickel Plating
-
ISO Tolerance
Narrow search by specifying Brand
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
Examples how you can use these components Test
Categories related to Linear Shafts
-
- Linear Shafts
- Shaft Supports / Shaft Holders
- Set Collars / Clamping Rings
- Linear Bushings / Linear Ball Bearings / Linear Ball Bushings
- Ball Guides
- Spline Shaft
- Plain Bearing (Bushings, Washers, Semifinished Products)
- Plain Bearing (Plates, Guide Rails, Semifinished Products)
- Linear Guides
- Cable Carriers
- Ball Screws
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators
-
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.