OSG Radius End Mills (Carbide)（Type：Radius）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR
OSG
The three-dimensional negative shape of the R-profile provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.Starting from∗ ： 101.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE
OSG
Suitable for high efficiency machining of pocket engraving by required minimum blade length and strength torsion. The total length of the tool just fits to shrink - HSK.- Volume Discount
Starting from∗ ： 122.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 321.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Corner R Short FX-CR-MG-EDS
OSG
Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.- Volume Discount
Starting from∗ ： 59.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cermet End Mill (for Bottom Surface Finishing), FX-MCF
OSG
End mills dedicated to bottom surface finishing, adopted cermet base metal plus FX coating. Stunning high-speed mirror finish machining.Starting from∗ ： 94.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Ultra FX Super End Mill (Corner R Short) FXS-CR-EMS
OSG
Radius end mills for high rigidity high-speed machining. Can perform high-speed machining of hardened steel.- Volume Discount
Starting from∗ ： 106.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Corner R Short GX-CR-EDS-SF
OSG
Mushroom shape super hard corner radius end mills developed for shrink fitting.Starting from∗ ： 56.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Corner R Short, CBN-CR-EDS
OSG
2-flute CBN-CR-EDS with short corner radius
-shows high performance in machining high-strength materials.Starting from∗ ： 187.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Corner R Short FX-CR-EDS-6
OSG
Corner Radius End Mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center.Starting from∗ ： 65.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Corner R Long, FX-CR-MG-EDL
OSG
Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.Starting from∗ ： 93.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
New DLC Coated Carbide End Mill 2 Flute Aluminum Alloy Short Type DLC-AIR-EDS
OSG
An end-mill with a concept of ultra high speed processing of aluminum alloys. Suitable for high efficiency processing of large size aluminum parts for air craft.Starting from∗ ： 233.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute, for Aluminum Alloy, CA-MFE-SF
OSG
Strain generation is suppressed by the R-flange of the shaft.
Material aluminium/copper
Coating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Corner/ball radius (mm) 1
Number of grooves (pcs.) 3.Starting from∗ ： 126.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS
OSG
Even in machining of aluminum parts with high cutting removal rate, performs chip discharge ability excellent in creating of unique groove form, at the same time achieving significant depth of cut and high feed.- Volume Discount
Starting from∗ ： 58.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide End Mill Phoenix (High Feeder Bull Nose) PHX-CRT
OSG
Corner radius type with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.Starting from∗ ： 98.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide End Mill Phoenix (Deep Feeder Radius) PHX-DFR
OSG
Adopt WXS coating of ultra heat-resistant and ultra-hard coatingStarting from∗ ： 88.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Heavy-Duty, Multifunction for 3-Flute Steel / Aluminum Alloy CA-PKE
OSG
Supports variety of cutter paths from roughing to finish machining, due to short blade of high rigidity and neck relief type.- Volume Discount
Starting from∗ ： 78.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Ultra FX End Mill (Positive Corner R Type Multi-Function) FX-CR-MG-EHS
OSG
Sharp positive cutting edge prevents the occurrence of work hardening and similar. With corner R, it can support a variety of cutter paths.Starting from∗ ： 95.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Flute Corner R, Long, FX-CR-MG-EML
OSG
Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.Starting from∗ ： 360.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS
OSG
Suppressing chatter due to the effect of evolutionary "unequal lead".- Volume Discount
Starting from∗ ： 109.70 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Corner Long Shank for 2-Flute Graphite DIA-LS-CRED
OSG
Thin standing wall processing tool for graphite electrode. Step processing compatibility prevents chatter mark and edge chipping. Radius blade is on the shank side as well.Starting from∗ ： 160.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WX21 Carbide End Mill (Super Radius), WX-CRE
OSG
New type of radius end mill that achieves high efficiency in roughing of mold. Performs high-efficiency direct carving of hardened steel.- Volume Discount
Starting from∗ ： 89.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Powerful Type Multi-Function DLC-PKE
OSG
Ultra-smooth DLC coating does high-speed machining of aluminum, and of course, semi-dry processing.Starting from∗ ： 76.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Powerful Type Multi-Function FXS-PKE
OSG
In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.- Volume Discount
Starting from∗ ： 95.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WX21 Carbide End Mill, 4-Flute, Short, Corner Radius, Strong, Heavy-Duty Model, WX-CR-PHS
OSG
High helix radius end mill with both chip discharge ability and cutting edge rigidity at high level. In addition to the usual two-dimensional processing, supports a wide range of cutter paths such as ramping and profile machining.- Volume Discount
Starting from∗ ： 116.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS
OSG
Suppressing chatter due to the effect of evolutionary "unequal lead".- Volume Discount
Starting from∗ ： 145.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Multi-Function Type for Deep Wall Applications FXS-MFE
OSG
A wide standing wall is machined with high efficiency and precision in step cutting.
Coated for steel
Standard/Alteration Category: Manufacturer's standard product
Number of flutes (pcs.) 4
Spiral angle, Strong spiral (45 to 60°).Starting from∗ ： 225.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 113.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 117.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 188.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 4-Flute, UVX-TI-4FL-SL
OSG
[Features]·It supports grooving and side milling, complex pocket machining, and chatter-prone milling. It has achieved stability and high efficiency in titanium alloy machining, which has a high degree of difficulty. ·With grooved SAFE-LOCK, high runout accuracy (less than 3 µm), adjustable tool runout length, removable of broken tools, internal lubrication of holder, compatible with high-speed steel tools. [Applications]·Work material: Titanium alloy. [Specifications]·Helix angle: 40.5°/43.5°, "Material": Cemented carbide (Carbide)Starting from∗ ： 113.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 5-Flute, UVX-TI-5FL-SL
OSG
[Features]·It supports grooving and side milling, complex pocket machining, and chatter-prone milling. It has achieved stability and high efficiency in titanium alloy machining, which has a high degree of difficulty. ·With grooved SAFE-LOCK, high runout accuracy (less than 3 µm), adjustable tool runout length, removable of broken tools, internal lubrication of holder, compatible with high-speed steel tools. [Applications]·Work material: Titanium alloy. [Specifications]·Helix angle: 40.5°/43.5°, "Material": Cemented carbide (Carbide)Starting from∗ ： 117.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Short End Mill With Oil Hole For Aluminum Alloys AERO-O-ETS
OSG
[Features]
· For all types of machining from rough machining to finishing.
· Maximizes the performance of high-power output machinery.
· Ideal for high-efficiency machining of the large-type aluminum parts used in aircraft.
· Ideal for aluminum alloys
· DLC coating.
· The sharp edges provide excellent cutting performance. (Thin film thickness of 1 μm)Starting from∗ ： 226.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Blade diameter (D)(φ) |
| R Size(mm) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Overall Length (L)(mm) |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR | Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE | Titanium Alloy Processed for High Feed Radius End Mills (Multiple Flutes) | New DLC Coated Carbide End Mill 2 Flute Aluminum Alloy Short Type DLC-AIR-EDS | 3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS | Heavy-Duty, Multifunction for 3-Flute Steel / Aluminum Alloy CA-PKE | Carbide Ultra FX End Mill (Positive Corner R Type Multi-Function) FX-CR-MG-EHS | 4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS | WX21 Carbide End Mill, 4-Flute, Short, Corner Radius, Strong, Heavy-Duty Model, WX-CR-PHS | Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS | Uneven Lead End Mill (4 Flutes) for Machining FX Coated Titanium Alloy | Uneven Lead End Mill (5 Flutes) for Machining FX Coated Titanium Alloy | General Purpose Router, with Bottom Blade Corner Rounded (4 Bottom Blades) DIA-MRC | UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 4-Flute, UVX-TI-4FL-SL | UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 5-Flute, UVX-TI-5FL-SL | 3-Flute Short End Mill With Oil Hole For Aluminum Alloys AERO-O-ETS | ||||||||||||||||
| Starting from∗ | 101.29 € *Unit price with basic configuration | 122.60 € *Unit price with basic configuration Volume Discount | 321.70 € *Unit price with basic configuration | 59.59 € *Unit price with basic configuration Volume Discount | 94.84 € *Unit price with basic configuration | 106.85 € *Unit price with basic configuration Volume Discount | 56.95 € *Unit price with basic configuration | 187.96 € *Unit price with basic configuration | 65.64 € *Unit price with basic configuration | 93.71 € *Unit price with basic configuration | 233.00 € *Unit price with basic configuration | 126.21 € *Unit price with basic configuration | 58.02 € *Unit price with basic configuration Volume Discount | 98.58 € *Unit price with basic configuration | 88.29 € *Unit price with basic configuration | 78.20 € *Unit price with basic configuration Volume Discount | 95.88 € *Unit price with basic configuration | 360.75 € *Unit price with basic configuration | 109.70 € *Unit price with basic configuration Volume Discount | 160.88 € *Unit price with basic configuration | 89.60 € *Unit price with basic configuration Volume Discount | 76.90 € *Unit price with basic configuration | 95.20 € *Unit price with basic configuration Volume Discount | 116.30 € *Unit price with basic configuration Volume Discount | 145.60 € *Unit price with basic configuration Volume Discount | 225.60 € *Unit price with basic configuration | 113.10 € *Unit price with basic configuration | 117.00 € *Unit price with basic configuration | 188.71 € *Unit price with basic configuration | 113.10 € *Unit price with basic configuration | 117.00 € *Unit price with basic configuration | 226.02 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Blade diameter (D)(φ) | 0.5 ～ 3 | 6 ～ 12 | 16 ～ 25 | 1 ～ 12 | 6 ～ 20 | 6 ～ 25 | 10 ～ 20 | 3 ～ 6 | 0.5 ～ 2.5 | 6 ～ 20 | 12 ～ 25 | 18 ～ 22 | 3 ～ 20 | 1 ～ 5 | 6 ～ 20 | 3 ～ 20 | 6 ～ 12 | 16 ～ 20 | 3 ～ 25 | 5 ～ 11 | 2 ～ 13 | 3 ～ 20 | 3 ～ 20 | 6 | 6 ～ 25 | 10 | 12 ～ 25 | 12 ～ 25 | 4 ～ 12 | 12 ～ 25 | 12 ～ 25 | 20 ～ 25 |
| R Size(mm) | 0.05 ～ 0.5 | 0.5 ～ 1 | - | 0.1 ～ 3 | 0.1 ～ 0.4 | 0.2 ～ 3 | 0.5 ～ 1 | 0.2 ～ 2 | 0.1 | 0.5 ～ 3 | 1 ～ 3 | 1 | 0.2 ～ 3 | 0.3 ～ 1 | 1.5 ～ 3 | 0.5 ～ 3 | 0.2 | 0.5 ～ 3 | 0.2 ～ 5 | 0.3 ～ 1 | 0.5 ～ 3 | 0.5 ～ 3 | 0.2 ～ 3 | 0.3 | 0.3 ～ 5 | 0.5 | R0 ～ R6 | R0 ～ R6 | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 |
| work material | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | - | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] | Aluminum[◎] / Copper[◎] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | Graphite[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[◎] | Aluminum[◎] / Copper[○] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | - | - | - | Stainless Steel[○] / Titanium[◎] | Stainless Steel[○] / Titanium[◎] | Aluminum[◎] |
| Blade length (ℓ)(mm) | 0.3 ～ 1.8 | 9 ～ 18 | 5 | 2.5 ～ 26 | 0.9 ～ 3.2 | 15 ～ 50 | 10 ～ 20 | 3 ～ 6 | 0.7 ～ 3.7 | 20 ～ 56 | 14 ～ 27 | 18 ～ 22 | 8 ～ 38 | 2 ～ 10 | 12 ～ 40 | 4.5 ～ 30 | 13 ～ 26 | 48 ～ 56 | 6 ～ 50 | 10 ～ 22 | 0.8 ～ 5.5 | 4.5 ～ 30 | 5 ～ 30 | 13 | 12 ～ 50 | 15 | 24 ～ 50 | 24 ～ 50 | 12 ～ 36 | 24 ～ 50 | 24 ～ 50 | 30 ～ 37.5 |
| Number of flutes(sheet) | 2 | 4 | 6 ～ 8 | 2 | 4 | 6 ～ 8 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 2 | 3 ～ 4 | 3 | 4 | 4 | 6 | 4 | 4 | 5 | 4 | 4 | 5 | 3 |
| Type | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius |
| Overall Length (L)(mm) | 45 ～ 50 | 50 ～ 80 | 120 | 40 ～ 110 | 90 ～ 160 | 90 ～ 180 | 32 ～ 58 | 45 ～ 50 | 50 | 90 ～ 160 | 90 ～ 110 | 51 ～ 60 | 50 ～ 105 | 60 ～ 70 | 80 ～ 150 | 50 ～ 125 | 90 ～ 110 | 140 ～ 160 | 50 ～ 120 | 100 ～ 180 | 60 ～ 110 | 50 ～ 125 | 60 ～ 160 | 60 | 50 ～ 120 | 130 | 90 ～ 140 | 90 ～ 140 | 62 ～ 86 | 90 ～ 140 | 90 ～ 140 | 100 |
| Shank diameter (d)(mm) | 4 ～ 6 | 6 ～ 12 | 16 ～ 25 | 4 ～ 12 | 6 ～ 20 | 6 ～ 25 | 6 ～ 12 | 6 | 6 | 6 ～ 20 | 12 ～ 25 | 10 ～ 12 | 6 ～ 20 | 6 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 16 ～ 20 | 6 ～ 25 | 4 ～ 10 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 | 6 ～ 25 | 8 | 12 ～ 25 | 12 ～ 25 | 4 ～ 12 | 12 ～ 25 | 12 ～ 25 | 20 ～ 25 |
| Underneck length (ℓ1)(mm) | 1.5 ～ 6 | - | - | - | 9 ～ 30 | - | - | - | 1.5 ～ 5 | - | 40 ～ 56 | - | - | 4 ～ 15 | - | - | - | - | - | - | 5 ～ 24 | - | 9 ～ 60 | - | - | - | 36 ～ 75 | 36 ～ 75 | - | 36 ～ 75 | 36 ～ 75 | 55 |
| Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface | - | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | - | - | - | - | - | - |
| Coating | - | TiAlN | - | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | Non-Coated | TiAlN | TiAlN | DLC | Non-Coated | Non-Coated | TiAlN | For High Hardness (Silicon Group) | Non-Coated | TiAlN | TiAlN | TiAlN | Dia Coat | TiAlN | DLC | TiAlN | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN | DLC |
| Torsion Angle (θ) | - | High Helix (45˚ to 60˚) | - | Standard Helix (30˚ to 40˚) | No torsion | High Helix (45˚ to 60˚) | No torsion | No torsion | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Weak torsion (15˚ to 25˚) | No torsion | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | No torsion | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | - | - | - | Other | Other | Standard Helix (30˚ to 40˚) |
| R Precision(μm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Blade diameter (D)(φ)
-
R Size(mm)
-
work material
-
Blade length (ℓ)(mm)
- 0.16
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.5
- 0.6
- 0.64
- 0.7
- 0.75
- 0.8
- 0.9
- 1
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4.5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6.75
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10.5
- 11
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 75
-
Number of flutes(sheet)
-
Type
- Radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Overall Length (L)(mm)
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Brand
-
- MISUMI (37)
- OSG (32)
- NACHI(FUJIKOSHI) (11)
- GUHRING (9)
- DIJET (8)
- KYOWA SEIKO (7)
- 7 LEADERS (4)
- OKAZAKI SEIKO (4)
- SANKO MFG (4)
- SANDVIK (4)
- UNION TOOL (2)
- ATOM (1)
- NS TOOL (1)
- THE CUT (1)
- TAIYO-TOOL (1)
- WATERMILLS (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Radius End Mills (Carbide)
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.