OSG Cutters / Indexable End Mills（Machining Application：Groove）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 224.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters PSE Threaded Type
OSG
Threaded type for shoulder cutters. Special holders support different machining depths.Starting from∗ ： 268.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters Bore Type
OSG
By using this high precision insert, excellent bottom surface roughness is achieved. The bottom notch effect splits chips in two during ramp and spiral milling, which suppresses chip piercing and entanglement and enables smooth milling.Starting from∗ ： 335.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 429.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Round Cutters Threaded Type
OSG
Screw Type Cutter For side surfaces, grooving, digging and form cutting.Starting from∗ ： 331.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Round Cutters Straight Shank Type
OSG
The wide reversible plate pocket improves cutting performance, and the use of a body retraction mould that supports 3D machining enables highly efficient mould machining.Starting from∗ ： 248.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive Mill, Neo Shell Type
OSG
Shell type that uses 3-dimensional breaker inserts of good sharpness. For use with face mill arbor.Starting from∗ ： 751.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive, Neo Straight Shank
OSG
End mill type that uses 3-dimensional breaker inserts of good sharpness. Addition to multi-blade 20mm shank that uses small type of inserts good for application in small machines.Starting from∗ ： 164.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive, Neo Straight Shank
OSG
End mill type that uses 3-dimensional breaker inserts of good sharpness. Insert application is wide.Starting from∗ ： 496.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters Straight Shank Type
OSG
By using this high-precision insert, excellent bottom surface roughness is achieved. Due to the bottom notch effect, chips are divided into 2 parts during ramp and spiral milling, which suppresses chip piercing and entanglement and enables smooth milling.Starting from∗ ： 260.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Straight Shank Type
OSG
Indexable high feed radius cutter, threaded. Special holders support different machining depths.Starting from∗ ： 231.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Threaded Type
OSG
PHC screw type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form CuttingStarting from∗ ： 404.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Bore Type
OSG
PHC bore type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form CuttingStarting from∗ ： 318.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Efficiency Radius Cutters with Shaft
OSG
A high feed radius cutter series with variable negative chamfer insert that prevents chipping and reduces cutting force.Starting from∗ ： 291.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,019.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,500.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 254.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 671.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Machining Application |
| blade diameter D(mm) |
| work material |
| Mounting Method |
| Finish category |
| Overall length (L)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Compatible Tip Material |
| Maximum Cutting Depth (Ad)(mm) |
| Underneck length (ℓ1)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type | Phoenix Series 4-Corner Shoulder Cutting Cutters Straight Shank Type | ||||||||||||||||
| Starting from∗ | 224.79 € *Unit price with basic configuration | 268.40 € *Unit price with basic configuration | 335.83 € *Unit price with basic configuration | 429.70 € *Unit price with basic configuration | 331.10 € *Unit price with basic configuration | 248.60 € *Unit price with basic configuration | 751.17 € *Unit price with basic configuration | 164.58 € *Unit price with basic configuration | 496.42 € *Unit price with basic configuration | 260.30 € *Unit price with basic configuration | 231.83 € *Unit price with basic configuration | 404.50 € *Unit price with basic configuration | 318.50 € *Unit price with basic configuration | 291.42 € *Unit price with basic configuration | 1,019.80 € *Unit price with basic configuration | 1,500.00 € *Unit price with basic configuration | 254.50 € *Unit price with basic configuration | 671.67 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Machining Application | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove |
| blade diameter D(mm) | 18.9 ～ 123.7 | 16 ～ 40 | - | 50 ～ 80 | 10 ～ 30 | 10 ～ 88 | 50 | 20 | 32 ～ 63 | 16 ～ 63 | 13.2 ～ 46.4 | 13.2 ～ 28.2 | 23.4 ～ 83.4 | 20 ～ 105 | 25 ～ 50 | 50 ～ 80 | 25 ～ 40 | 80 ～ 160 |
| work material | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | - | - | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Titanium | General Steel / High Hardness Steel / Cast Iron | - | - | - | - |
| Mounting Method | With handle / Arbor | Centering Plug | - | Arbor | Centering Plug | With handle / Arbor | Arbor | With handle | With handle | With handle | With handle | Centering Plug | Arbor | With handle / Centering Plug | With handle | Arbor | With handle | Arbor |
| Finish category | Rough to Finish Processing | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall length (L)(mm) | 40$40.7 ～ 98.7 | 27 ～ 40 | - | 40 ～ 50 | 33 ～ 40 | 40 ～ 250 | 40 | 100 | 150 ～ 200 | 90 ～ 190 | 140 ～ 300 | 35 ～ 40 | 40 ～ 63 | 63 ～ 306 | 125 ～ 144 | 74 ～ 88 | 120 ～ 140 | - |
| Shank diameter (d)(mm) | 20 ～ 25 | - | - | - | - | 20 ～ 42 | - | 20 | 32 | 16 ～ 32 | 25 ～ 42 | - | - | MT5-M16 ～ CN50.8 | 25 ～ 42 | - | 25 ～ 32 | - |
| Number of flutes(sheet) | 3 ～ 12 | 2 ～ 6 | 3 ～ 11 | 3 ～ 9 | 2 ～ 4 | 2 ～ 10 | 5 | 3 | 3 ～ 4 | 2 ～ 6 | 2 ～ 5 | 2 ～ 4 | 3 ～ 8 | 2 ～ 6 | 2 ～ 4 | 3 ～ 4 | 3 ～ 5 | 10 ～ 20 |
| Compatible Tip Material | Carbide Coat | Carbide Coat / No Carbide Coat | - | - | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | - | - | - | - |
| Maximum Cutting Depth (Ad)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Underneck length (ℓ1)(mm) | 25.7 ～ 40.7 | - | - | - | - | 50 ～ 120 | - | 30 | 45 | 25 ～ 90 | 40 ～ 180 | - | - | 50 ～ 170 | 50 ～ 64 | - | 35 ～ 50 | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Machining Application
-
blade diameter D(mm)
- 4.29 - 12.70
- 4.52 - 9.53
- 4.60 - 13.00
- 5
- 5.00 - 10.00
- 5.00 - 12.00
- 5.69 - 12.70
- 6
- 7.00 - 12.00
- 7.42 - 12.70
- 7.49 - 15.88
- 7.60 - 16.00
- 7.87 - 15.88
- 8
- 8.00 - 15.00
- 8.00 - 16.00
- 8.60 - 20.00
- 8.86 - 15.88
- 9.00 - 16.00
- 9.04 - 19.05
- 9.525
- 9.7
- 10
- 10.00 - 20.00
- 10.59 - 19.05
- 11.05 - 19.05
- 11.3
- 11.60 - 20.00
- 11.7
- 12
- 12.00 / 16.20
- 12.00 - 20.00
- 12.00 / 20.10
- 12.00 / 22.90
- 12.00 / 23.40
- 12.00 - 24.00
- 12.7
- 13
- 13.2
- 13.21 / 17.42
- 13.21 / 21.29
- 13.21 / 24.61
- 13.21 / 27.20
- 13.4
- 13.50 - 25.00
- 13.7
- 14
- 14.00 - 25.40
- 15
- 15.00 - 25.00
- 15.4
- 15.7
- 15.875
- 15.88
- 16
- 16.00 - 32.00
- 16.2
- 16.60 - 25.00
- 16.94 - 31.75
- 16.99 - 25.40
- 17
- 17.00 - 25.00
- 17.20 - 32.00
- 17.6
- 18
- 18.2
- 18.4
- 18.9
- 19
- 19.05
- 19.56 / 30.96
- 19.7
- 20
- 20
- 20.00 - 32.00
- 20.2
- 20.50 / 31.90
- 20.50 - 32.00
- 20.50 / 36.90
- 20.9
- 21
- 21.20 - 36.00
- 22
- 22.00 - 32.00
- 23.2
- 23.29 - 38.10
- 23.4
- 23.8
- 24
- 24.00 - 32.00
- 25
- 25
- 25.20 - 40.00
- 25.4
- 25.50 / 29.70
- 25.50 / 33.60
- 25.50 / 36.90
- 25.50 / 39.50
- 25.91 / 30.10
- 25.91 / 33.99
- 25.91 / 37.31
- 25.91 / 39.90
- 26
- 26.8
- 27.20 - 42.00
- 28
- 28.2
- 29.40 - 44.00
- 30
- 30/32
- 30.7
- 31.75
- 32
- 32
- 33
- 33.4
- 34
- 35
- 35.20 - 50.00
- 35.9
- 35.99 - 50.80
- 36
- 36.7
- 37.20 - 52.00
- 37.40 - 52.00
- 38
- 38.1
- 38.2
- 39
- 39.40 - 54.00
- 39.5
- 40
- 40
- 40.50 / 51.90
- 42
- 43
- 44
- 45
- 46.4
- 47
- 48.20 - 63.00
- 48.69 - 63.50
- 48.7
- 49.4
- 50
- 50
- 50.50 / 61.90
- 50.8
- 51
- 51.2
- 51.20 - 66.00
- 51.30 - 66.00
- 52
- 52.2
- 54
- 54.08
- 55
- 60
- 61.39 - 76.20
- 61.7
- 62.5
- 62.992
- 63
- 63
- 63.4
- 63.5
- 63.50 / 74.90
- 64
- 64.08
- 65
- 65.20 - 80.00
- 66
- 66.04
- 68
- 69.20 - 84.00
- 69.40 - 84.00
- 69.7
- 70
- 75
- 75.5
- 75.997
- 76
- 76.2
- 77.08
- 77.08
- 77.2
- 78.08
- 78.7
- 80
- 80
- 80.01
- 82
- 83.4
- 84
- 85.20 - 100.00
- 86
- 86.7
- 86.79 - 101.60
- 88
- 89.4
- 90
- 92.5
- 94.08
- 94.08
- 98.7
- 98.8
- 100
- 100.00 - 107.00
- 101.3
- 101.6
- 101.60 - 108.61
- 101.60 - 117.40
- 102
- 103
- 105
- 106.7
- 109
- 110
- 112.5
- 114.08
- 114.08
- 118.8
- 120
- 123.7
- 124.6
- 125
- 125.00 - 132.00
- 127
- 127.00 - 134.01
- 127.00 - 142.80
- 128.4
- 130
- 131.4
- 131.7
- 136
- 137.5
- 138.8
- 139.08
- 139.08
- 140
- 150
- 152
- 152.4
- 152.40 - 159.41
- 152.40 - 168.20
- 159.6
- 160
- 160.00 - 167.00
- 166.7
- 172.5
- 174.08
- 174.08
- 178.8
- 180
- 200
- 200.00 - 207.00
- 203
- 203.2
- 203.20 - 210.21
- 203.20 - 219.00
- 212.5
- 218.8
- 249.6
- 250
- 250.00 - 257.00
- 250.00 - 265.80
- 254
- 254.00 - 261.00
- 254.00 - 261.01
- 254.00 - 269.80
- 262.5
- 268.8
- 304.8
- 304.80 - 311.81
- 305
- 314.6
- 315
- 315.00 - 322.00
- 354.6
- 355
- 355.00 - 362.00
- 399.6
- 400
- 400.00 - 407.00
- 406
- 406.40 - 413.41
- 499.6
- 500
- 500.00 - 507.00
- 508
- 508.00 - 515.01
-
work material
-
Mounting Method
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
2.18～5.82
- 2.18
- 2.64
- 2.7
- 2.79
- 3.66
- 3.7
- 4.52
- 4.7
- 5.7
- 5.82
-
19.99
-
20～29.06
- 20
- 24.99
- 25
- 26
- 27
- 29.06
-
30～38
- 30
- 32
- 33
- 35
- 38
-
40～49
- 40
- 40$40.7
- 40.01
- 41.05
- 41.78
- 42.95
- 43
- 44.5
- 45
- 45.009
- 46
- 48
- 49
-
50～59.99
- 50
- 50$50.7
- 50.01
- 50.013
- 51
- 53.26
- 54
- 56.9
- 57
- 59.08
- 59.99
-
60～68
- 60
- 60.25
- 61.77
- 62.99
- 62.992
- 63
- 63$63.7
- 63.5
- 65
- 68
-
70～79
- 70
- 70.002
- 73
- 74
- 75
- 76
- 77.7
- 78
- 79
-
80～89.99
- 80
- 81
- 83
- 84
- 84.7
- 85
- 88
- 89.99
-
90～98.7
- 90
- 91
- 92
- 95
- 96
- 98
- 98.7
-
100～109
- 100
- 101
- 102
- 103
- 104
- 105
- 107
- 108
- 109
-
110～119.99
- 110
- 110.01
- 111
- 112
- 115
- 117
- 119.99
-
120～128
- 120
- 121
- 123
- 123.5
- 124
- 125
- 127
- 128
-
130～138
- 130
- 131
- 132
- 133
- 134
- 134.6
- 135
- 136
- 137
- 138
-
140～147
- 140
- 141
- 143
- 144
- 144.78
- 145
- 147
-
150～159.99
- 150
- 152.4
- 155
- 158
- 159.99
-
160～166
- 160
- 161
- 165
- 165.1
- 166
-
170～177
- 170
- 171
- 172
- 173
- 175
- 176
- 177
-
180～187
- 180
- 184.6
- 185
- 186
- 187
-
190～191
- 190
- 190.5
- 191
-
200～209
- 200
- 203.2
- 207
- 209
-
210～219
- 210
- 215
- 217
- 219
-
220～228.6
- 220
- 221
- 228.6
-
230
-
240
-
250～257
- 250
- 254
- 255
- 256
- 257
-
260～266.8
- 260
- 266.8
-
270
-
290～296.8
- 290
- 296.8
-
300～306
- 300
- 306
-
331.8
-
350
-
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Compatible Tip Material
-
Maximum Cutting Depth (Ad)(mm)
-
Underneck length (ℓ1)(mm)
Narrow search by specifying Brand
-
- MISUMI (1)
- KYOCERA (27)
- SANDVIK (26)
- DIJET (19)
- OSG (18)
- BIG KAISER (8)
- ASAHI TOOLS (3)
- MITSUBISHI MATERIALS (0)
- PHOENIX CONTACT (0)
- FUJIGEN (0)
- TUNGALOY (0)
- ESCO (0)
- NACHI(FUJIKOSHI) (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Cutters / Indexable End Mills
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.