OSG Point Taps（Screw size (Nominal)：M8）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Promotional pricing

Point Tap Series, for General, EX-POT

OSG

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Volume Discount

Starting from^∗ ：	11.83 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Starting from^∗ ：	20.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Starting from^∗ ：	27.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Starting from^∗ ：	15.26 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

OSG

In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)

Starting from^∗ ：	28.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Tin Coated, TIN-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Starting from^∗ ：	20.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, V Coated, V-POT

OSG

Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

Volume Discount

Starting from^∗ ：	24.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series For Stainless Steel Use EX-SUS-POT

OSG

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Volume Discount

Starting from^∗ ：	12.96 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

OSG

Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

Volume Discount

Starting from^∗ ：	17.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, General Homo Treatment, EX-H-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Starting from^∗ ：	11.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, General Long Shank, EX-LT-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Starting from^∗ ：	17.12 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Ultra Synchronizing Taps, HS-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Volume Discount

Starting from^∗ ：	45.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Volume Discount

Starting from^∗ ：	31.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Starting from^∗ ：	32.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for Deep Holes, EX-DH-POT

OSG

Suitable for through holes with extra long threads and materials that easily suffer sticking.

Volume Discount

Starting from^∗ ：	12.51 €
	Special price
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Starting from^∗ ：	40.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for Thin Plates, EX-SS-POT

OSG

Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes

Volume Discount

Starting from^∗ ：	12.51 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

OSG

Volume Discount

Starting from^∗ ：	17.12 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series Point Tap Long Shank A-LT-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Starting from^∗ ：	28.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Promotional pricing			Promotional pricing				Promotional pricing			Promotional pricing				Promotional pricing		Promotional pricing
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Point Tap Series, for General, EX-POT	A Tap Series for Pipes Point Tap A-POT	Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT	Point Tap Series, for Difficult-to-Machine Material, CPM-POT	Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT	Point Tap Series, Tin Coated, TIN-POT	Point Tap Series, V Coated, V-POT	Point Tap Series For Stainless Steel Use EX-SUS-POT	Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT	Point Tap Series, General Homo Treatment, EX-H-POT	Point Tap Series, General Long Shank, EX-LT-POT	Point Tap Series, Ultra Synchronizing Taps, HS-RFT	Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT	Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT	Point Tap Series, for Deep Holes, EX-DH-POT	Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT	Point Tap Series, for Thin Plates, EX-SS-POT	Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT	A Tap Series Point Tap Long Shank A-LT-POT
Starting from^∗	11.83 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	20.58 € *Unit price with basic configuration Volume Discount	27.23 € *Unit price with basic configuration Volume Discount	15.26 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	28.34 € *Unit price with basic configuration	20.58 € *Unit price with basic configuration Volume Discount	24.73 € *Unit price with basic configuration Volume Discount	12.96 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	17.46 € *Unit price with basic configuration Volume Discount	11.69 € *Unit price with basic configuration Volume Discount	17.12 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	45.60 € *Unit price with basic configuration Volume Discount	31.94 € *Unit price with basic configuration Volume Discount	32.64 € *Unit price with basic configuration	12.51 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	40.05 € *Unit price with basic configuration Volume Discount	12.51 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	17.12 € *Unit price with basic configuration Volume Discount	28.10 € *Unit price with basic configuration
Min. Shipping Days ：	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	6 Days	6 Days	6 Days	6 Days
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8	M8
Pitch (P), Number of Threading(mm)	0.5 ～ 1.25	0.75 ～ 1.25	1.25	1.25	1.25	1.25	1	1 ～ 1.25	1.25	1 ～ 1.25	0.75 ～ 1.25	1.25	1.25	1.25	1.25	1.25	1.25	1.25	0.75 ～ 1.25
Chamfer threads (Lcf)	5P	5P	5P	5P	5P	5P	5P	4P	4P	5P	5P	6P	5P	6P	4P	5P	5P	5P	5P
Tool Material Type	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Nickel-based alloy (Inconel, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]
Tap Type	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap
Hole type	For through hole	For through hole	For through hole	For through hole	For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole
Coating Y/N	N/A	Available	Available	N/A	Available	Available	Available	N/A	N/A	N/A	N/A	Available	Available	Available	N/A	N/A	N/A	N/A	Available
Coating Type	Non-Coated	Other	TiN	Non-Coated	Other	TiN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN	TiN	TiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Other
Overall Length (L)(mm)	70	70	100 ～ 150	70	70	70	70	70	100 ～ 150	70	100 ～ 200	70	70	100 ～ 150	70	150	70	100 ～ 150	100 ～ 200

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
Clear

Screw size (Nominal)
No0UN

No.10-32UNF

No.10-24UNC

No.2-56UNC

No.4-48UNF

No.5-44UNF

No.5-40UNC

No.6-40UNF

No.6-32UNC

No.8-36UNF

No.8-32UNC

1UN

G 1"

M1

No1UN

W1

1"1/2UN

W1"1/2

1"1/4UN

W1"1/4

W1"1/8

1/2UN

G 1/2

UNC 1/2

UNF 1/2

W1/2

1/2-20UNF

1/2-13UNC

1/2W12

1/4UN

G 1/4

SM1/4

UNC 1/4

UNF 1/4

W1/4

1/4-28UNF

1/4-20UNC

1/4W20

G 1/8

SM1/8

W1/8

M1.1

M1.2

M1.4

M1.6

M1.7

M1.8

M2

No2UN

M2.2

M2.3

M2.5

M2.6

M3

No3UN

STI M3

3/4UN

G 3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-10UNC

3/4W10

3/8UN

G 3/8

UNC 3/8

UNF 3/8

W3/8

3/8-24UNF

3/8-16UNC

3/8W16

M3 - M10

M3 - M12

SM3/16

W3/16

3/16W24

SM3/32

M3.5

M4

No4UN

STI M4

№4-40UNC

M4.5

M5

No5UN

STI M5

№5-40UNC

5/8UN

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

5/8W11

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

M5.5

M6

No6UN

STI M6

№6-32UNC

M7

7 execution M3 - M12

7/8UN

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/16UN

UNC 7/16

UNF 7/16

7/16-20UNF

7/16-14UNC

7/16W14

M8

MF8

No8UN

STI M8

№8-32UNC

M9

9/16UN

9/16-18UNF

9/16-12UNC

SM9/32

SM9/64

M10

MF10

No10UN

STI M10

№10-32UNF

№10-24UNC

M11

SM11/64

M12

MF12

Mf12

No12UN

STI M12

M12 x 1.5

M13

M14

MF14

M15

SM15/64

M16

MF16

Mf16

M16 x 1.5

M17

M18

MF18

M19

M20

MF20

Mf20

M20 x 1.5

M22

M23

M24

M25

Mf25

M25 x 1.5

M26

M27

M28

M30

M32

Mf32

M33

M35

M36

M39

M42

M45

M48
Clear

Pitch (P), Number of Threading(mm)
0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

5

6

7

8

9

10

11

12

13

14

16

18

20

24

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
2.5P

4P

4.5P

5

5 P

5P

6P

24P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Vanadium High-Speed Steel
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Point tap
- Hand Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiAlN
- TiCN
- TiN
- Non-Coated
- Other
Details

Clear

Overall Length (L)(mm)
30

32

33

34

35

36

39

40

41

42

44

45

46

48

50

51

52

53

55

56

58

59

60

62

63

65

66

70

72

75

80

82

85

88

89

90

95

100

102

105

110

112

115

120

125

130

135

140

145

150

155

160

165

175

180

185

200

250

300
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (3)
- Cost Efficient Products ()
- OSG (19)
- YAMAWA MFG (17)
- REX TOOLS (9)
- SANDVIK (3)
- NACHI(FUJIKOSHI) (2)
- WERA (2)
- GUHRING (1)
- FEIN (1)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- SKC (0)
- TRUSCO NAKAYAMA (0)
- GEDORE (0)
- HAZET (0)
Clear