OSG Chamfering / Centering Tools（Tool Material Type：Carbide）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC
OSG
By adopting of sharp high helix, clean working surface with less burr can be obtained.- Volume Discount
Starting from∗ ： 81.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leading Drills, FX-LS-LDS
OSG
90° of tip angle with FX coating, carbide leading drill with long shank. Ideal for chamfering deep parts.Starting from∗ ： 295.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Spiral Chamfering Cutter FX-SCC
OSG
By adopting of sharp high helix, clean working surface with less burr can be obtained.- Volume Discount
Starting from∗ ： 88.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leading Drills, FX-LDS
OSG
90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.Starting from∗ ： 357.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
2-Flute Corner, Rounding Shape, FX-ECR
OSG
Specialized R chamfering tools. As high toughness cemented carbide alloy was used as the base material, it is able to handle a wide range of workpieces.- Volume Discount
Starting from∗ ： 61.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.Starting from∗ ： 84.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC
OSG
Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.- Volume Discount
Starting from∗ ： 87.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute, Chamfering Cutter (Negative Type) HSCT-N
OSG
End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.- Volume Discount
Starting from∗ ： 73.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute, Chamfering Cutter (Positive Type) HSCT-P
OSG
End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.- Volume Discount
Starting from∗ ： 73.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N
OSG
End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.- Volume Discount
Starting from∗ ： 78.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P
OSG
Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.- Volume Discount
Starting from∗ ： 78.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series
OSG
Compared to conventional products, high-speed cutting is possible and a wide range of operations such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High speed steel and carbide series are available.- Volume Discount
Starting from∗ ： 119.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 33.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.- Volume Discount
Starting from∗ ： 119.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Starting from∗ ： 79.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Starting from∗ ： 79.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Starting from∗ ： 84.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Starting from∗ ： 84.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | 2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC | 2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC | 3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N | 3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P | FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P | WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N | ||||||||||
| Starting from∗ | 81.19 € *Unit price with basic configuration Volume Discount | 295.75 € *Unit price with basic configuration | 88.29 € *Unit price with basic configuration Volume Discount | 357.80 € *Unit price with basic configuration | 61.45 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 84.50 € *Unit price with basic configuration | 87.63 € *Unit price with basic configuration Volume Discount | 73.17 € *Unit price with basic configuration Volume Discount | 73.51 € *Unit price with basic configuration Volume Discount | 78.36 € *Unit price with basic configuration Volume Discount | 78.36 € *Unit price with basic configuration Volume Discount | 119.56 € *Unit price with basic configuration Volume Discount | 33.77 € *Unit price with basic configuration | 119.56 € *Unit price with basic configuration Volume Discount | 79.82 € *Unit price with basic configuration | 79.82 € *Unit price with basic configuration | 84.46 € *Unit price with basic configuration | 84.46 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Application | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | - | - | - |
| Tip angle (θ) | 90 | 90 | 90 | 90 | - | 90 | 90 | 90 | 90 | 90 | 90 | 60 | - | 90 | 90° | - | - | - |
| Tool Diameter (D)(mm) | 0.8 ～ 1 | 16 ～ 25 | 0.8 ～ 1 | 16 ～ 25 | 0.5 ～ 1.5 | 0.8 ～ 1 | 0.8 ～ 1 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 3.8 | 4 ～ 12 | 1 ～ 3.8 | - | - | - | - |
| work material | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | - | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | Single blade | Single blade | - | - | - |
| Peripheral Blade Y/N | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | N/A | N/A | - | - | - |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Coating Y/N | N/A | Available | Available | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | - | TiAlN | - | Other | Other | Other |
| R Size (R)(mm) | - | - | - | - | 0.1 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Application
-
Tip angle (θ)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1–6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.6～3.35
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2–10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3~14
- 3 to 15
- 3.1
- 3.15
- 3.17
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.92
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 9.53
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 15.88
- 16
- 16.15
- 16.3
- 16.5
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- 25.0(+0.3)
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Brand
-
- MISUMI (24)
- IWATA TOOL (27)
- MAKOTOLOY (22)
- OSG (18)
- GUHRING (9)
- ATOM (8)
- EIKOSHA (8)
- KYOWA SEIKO (7)
- YAMAWA MFG (7)
- NS TOOL (5)
- THE CUT (5)
- DIJET (4)
- SANKO MFG (4)
- ASAHI TOOLS (3)
- DIXI (3)
- NINE9 (3)
- NAKAJIMAKOUKI (2)
- OKAZAKI SEIKO (2)
- SANDVIK (2)
- 7 LEADERS (1)
- BIG KAISER (1)
- RYOKO SEIKI (1)
- TAIYO-TOOL (1)
- UNION TOOL (1)
- PREVOST (0)
- MAPAL (0)
- NIKKEN KOSAKUSHO (0)
- STAR-M (0)
- WALTER TITEX (0)
- SKC (0)
- SPEED TIGER (0)
- FUKUDA (0)
- NT TOOL (0)
- ESCO (0)
- WERA (0)
- FUJIGEN (0)
- WATERMILLS (0)
- TRUSCO NAKAYAMA (0)
- METABO (0)
- ALPEN (0)
- ILIX (0)
- DAIICHITOOL (0)
- REX TOOLS (0)
- WOLFCRAFT (0)
- NOGAJAPAN (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Chamfering / Centering Tools
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.