SANDVIK Holding Tools for I.D. Tuning（Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
SANDVIK Coromant Capto Adjustable Adaptor with Quick Change
SANDVIK
[Specifications]
・Type: Adapter with quick-change adapter
・Cutting Direction: Neutral
・Processing type: Interpolation turning - Finishing
・Overall Length L1: 150mm
・eClass-5.1: 21021105
[Features]
・The CoroBore XL system is a group of large-diameter boring tools. The wide application range covers rough and fine boring, interpolation turning as well as face grooving and the unique SpiroGrooving method
・Reliable system with rigid interfaces between head and cartridge for stable and vibration-free boring
・Optimized cartridges designed for highest stability
・Internal coolant through the tools to the cutting edge
・Silent Tools damped adapters designed for vibration-free large-diameter boringStarting from∗ ： 2,645.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK CoroBore BR20 Twin-Edge Rough Boring Tool
SANDVIK
[Specifications]
・Type: Double-edged boring tool
・Cutting Direction: Right-hand
・Cooling lubricant: Yes
・eClass-5.1: 21021105
[Features]
・Twin-edge multi-purpose rough boring
・The system consists of adapters with matching slides, shims and covers, making it possible to adapt the tool to various materials and conditionsStarting from∗ ： 1,924.85 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK Coromant Capto to Arbor Adaptor
SANDVIK
[Specifications]
・Type: Adapter
・Cutting Direction: Neutral
・eClass-5.1: 21021105Min. Shipping Days ： 5 Days -
SANDVIK CoroThread 266 Solid Carbide Boring Bar for Thread Turning
SANDVIK
[Specifications]
・Type: Boring bar
・Minimum Machining Diameter: 20, 24.9, 63mmmm
・Cutting Direction: Right-hand, Left-hand
・Overall Length L1: 200, 254mm
・eClass-5.1: 21010903
[Features]
・Optimize your tool path
・iLock interface
・Precision coolant solutionStarting from∗ ： 800.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK CoroThread 266 Cartridge for Thread Turning
SANDVIK
[Specifications]
・Type: Installation holder
・Minimum Machining Diameter: 55, 60mm
・Cutting Direction: Right-hand, Left-hand
・Overall Length L1: 63, 70mm
・eClass-5.1: 21012001Starting from∗ ： 258.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
T-Max P, Boring Tool Bit, Negative Inserts, Diamond 80° Compatible, A-PCLN
SANDVIK
First recommendation for general turning for medium to large parts
Inserts with crushers and materials for all machining areas.Starting from∗ ： 354.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 715.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 197.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CORO-TURN 107 Boring Bit for Positive Tips
SANDVIK
For turning inside and outside diameter slim parts
Exchanging inserts with high repeatability improves productivity and achieves high qualityStarting from∗ ： 198.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 198.02 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CORO-TURN 107 Carbide Vibration-Proof Boring Bit for Positive Tips
SANDVIK
For turning slim parts with inner and outer diameters
Insertion exchange with high repeatability improves productivity and achieves high qualityStarting from∗ ： 841.09 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CORO-TURN RC, Boring Bit for Negative Tips
SANDVIK
T-Max P series boring bars for outside diameter turning of large to medium sized parts with high productivity.Starting from∗ ： 431.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 418.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CORO-TURN SL, 570-Type Cutting Head
SANDVIK
CoroTurnSL is a modular system of adapters and cutting heads that enables the construction of customised tools for a variety of turning operations with a minimum number of partsStarting from∗ ： 435.21 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Cutting Head for CORO-TURN SL CORO-TURN 107
SANDVIK
For turning slim parts with inner and outer diameters
The plate change with high repeatability improves productivity and achieves high quality.Starting from∗ ： 348.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 454.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 233.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CORO-TURN SL, Vibration-Proof Boring Bit
SANDVIK
CoroTurn SL is a modular system of adapters and cutting heads that enables the construction of customised tools for a variety of turning operations with a minimum number of partsStarting from∗ ： 3,338.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroCut MB Solid Carbide Boring Tool Bit MB-A
SANDVIK
[Features]
Holder for inner-diameter turning (bore cutting) of small parts.
The EasyFix sleeve makes center-height alignment easy and ensures excellent rigidity.
Switch out the insert to use for grooving, threading, turning, profiling and face grooving operations.
Minimum machining diameter: ø10 mm.
For small inner-diameter turning (bore cutting) operations.Starting from∗ ： 187.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroCut MB Solid-Carbide Boring Tool Bit MB-E
SANDVIK
[Features]
Holder for inner-diameter turning (bore cutting) of small parts.
The EasyFix sleeve makes center-height alignment easy and ensures excellent rigidity.
Switch out the insert to use for grooving, threading, turning, profiling and face grooving operations.
Minimum machining diameter: ø10 mm.
For small inner-diameter turning (bore cutting) operations.Starting from∗ ： 350.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 476.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-ERX-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For back boring machining.Starting from∗ ： 208.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-X
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For back boring machining.Starting from∗ ： 277.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 180.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDXCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 198.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR / L-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 198.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 277.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-STFCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 198.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn 107, Boring Tool Bit for Turning
SANDVIK
[Features]
·Inner diameter boring tool bit with low cutting force
·The internal coolant ensures longer insert lifespan and good cutting chip handling
·High tool rigidity ensures stable machining operations even with workpieces with long protrusions
[Applications]
·For inner diameter turning operationsStarting from∗ ： 198.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR / L-E
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 211.52 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVUBR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 242.49 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn 111, Boring Tool Bit for Turning
SANDVIK
[Features]
·Inner diameter boring tool bit with low cutting force
·The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions
·Easy-fix sleeve for quick and accurate core height adjustment
[Applications]
·For inner diameter turning operationsStarting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L-ER
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 476.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Starting from∗ ： 842.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR / L-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR / L-R
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Starting from∗ ： 842.30 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111 Screw Clamp, A/E-SWLPR/LR
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...SWLPR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Bit CoroTurn RC Double Clamp A-DSKNR / L
SANDVIK
[Features]
A highly-rigid double clamp boring bit for inner diameter lathe turning
Supports the use of internal coolant
High tool rigidity
Supports inner-diameter turning (bore cutting) and the use of negative inserts
Supports everything from roughing through to finishingStarting from∗ ： 431.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Bit CoroTurn RC Double Clamp A-DWLNR / L
SANDVIK
[Features]
A highly-rigid double clamp boring bit for inner diameter lathe turning
Supports the use of internal coolant
High tool rigidity
Supports inner-diameter turning (bore cutting) and the use of negative inserts
Supports everything from roughing through to finishingStarting from∗ ： 453.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Tip Shape |
| Minimum Machining Diameter |
| Application |
| Cutting Direction |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank diameter |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | SANDVIK CoroThread 266 Solid Carbide Boring Bar for Thread Turning | T-Max P, Boring Tool Bit, Negative Inserts, Diamond 80° Compatible, A-PCLN | CORO-TURN 107 Carbide Vibration-Proof Boring Bit for Positive Tips | Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SDUCR / L-R | Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-ERX-R | Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-X | Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR / L-R | Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR / L-E | Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L-ER | Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SDUPR / L-ER | Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER | Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR / L-R | Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR / L-R | ||||||||||||||||||||||||||||||||
| Starting from∗ | 2,645.38 € *Unit price with basic configuration | 1,924.85 € *Unit price with basic configuration | - | 800.92 € *Unit price with basic configuration | 258.69 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 354.09 € *Unit price with basic configuration | 715.42 € *Unit price with basic configuration | 197.64 € *Unit price with basic configuration | 198.00 € *Unit price with basic configuration | 198.02 € *Unit price with basic configuration | 841.09 € *Unit price with basic configuration | 431.43 € *Unit price with basic configuration | 418.98 € *Unit price with basic configuration | 435.21 € *Unit price with basic configuration | 348.52 € *Unit price with basic configuration | 454.77 € *Unit price with basic configuration | 233.14 € *Unit price with basic configuration | 3,338.27 € *Unit price with basic configuration | 187.78 € *Unit price with basic configuration | 350.29 € *Unit price with basic configuration | 476.57 € *Unit price with basic configuration | 208.98 € *Unit price with basic configuration | 277.34 € *Unit price with basic configuration | 180.08 € *Unit price with basic configuration | 198.02 € *Unit price with basic configuration | 198.00 € *Unit price with basic configuration | 277.95 € *Unit price with basic configuration | 198.00 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 198.00 € *Unit price with basic configuration | 211.52 € *Unit price with basic configuration | 242.49 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 476.57 € *Unit price with basic configuration | 842.30 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 842.30 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 431.77 € *Unit price with basic configuration | 453.26 € *Unit price with basic configuration |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 14 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Applicable Tip Shape | - | - | - | - | - | S (Rectangular) | C (80° Diamond-Shape) | - | - | C (80° Diamond-Shape) | T (Triangle) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | - | - | - | - | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) / T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) / T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | W (Hexagonal Type) | W (Hexagonal Type) | S (Rectangular) | W (Hexagonal Type) |
| Minimum Machining Diameter | - | 28 ～ 115 | - | 20 ～ 63 | 55 ～ 60 | 50 ～ 70 | 20 ～ 63 | - | - | 20 | 8.5 ～ 25 | 18 | 32 | 40 ～ 80 | 50 ～ 80 | 20 ～ 32 | 57 | - | - | - | - | 15 ～ 22 | 22 ～ 27 | 33 | 20 ～ 32 | 20 ～ 32 | 20 | 32 ～ 40 | 11 | 22 | 11 ～ 50 | 22 | 27 ～ 33 | 10 ～ 32 | 18 ～ 20 | 15 ～ 20 | 15 ～ 18 | 15 ～ 32 | 22 | 8.5 ～ 20 | 13 ～ 16 | 6.5 ～ 16 | 8.5 ～ 12 | 32 | 40 ～ 50 |
| Application | - | - | - | - | - | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | - | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter |
| Cutting Direction | IKOU | Right-hand | IKOU | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Left-hand | Right-hand / Left-hand | Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | - | - | - | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand |
| Clamp Shape | - | - | - | - | - | Lever lock | Lever lock | - | - | Screw-on | Screw-on | Screw-on | Cable clamp | - | - | Screw-on | Cable clamp | - | - | - | - | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Cable clamp | Cable clamp |
| Overall Length L1 | 150 | - | 24.9936 ～ 240 | 200 ～ 254 | 63 ～ 70 | 58 ～ 73.7 | 200 ～ 350 | 24.1 ～ 62.7 | - | 200 | 80 ～ 250 | 150 ～ 180 | 300 | 32 ～ 40 | 32 ～ 40 | - | 42 | 113.65 ～ 154 | 620 | - | - | 150 ～ 200 | 200 ～ 250 | 312.2 | 200 ～ 300 | 200 ～ 300 | 200 | 300 | 100 | 200 | 125 ～ 300 | 200 | 250 ～ 300 | 125 ～ 300 | 150 ～ 200 | 150 ～ 200 | 150 ～ 180 | 125 ～ 300 | 204.6 | 80 ～ 200 | 150 ～ 180 | 80 ～ 180 | 80 ～ 125 | 300 | 300 |
| Clearance angle | - | - | - | - | - | - | 0° | - | - | 7° | 7° | 7° | 0° | - | - | - | - | - | - | - | - | 7° | 7° | 7° | 7° | 7° | 7° | 7° | 7° | 7° | 5° / 7° | 7° | 5° | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 0° | 0° |
| Shank diameter | - | - | 16 ～ 63.5 | 15.88 ～ 19.05 | - | - | 16 ～ 50 | 16 ～ 32 | - | 16 | 6 ～ 20 | 12 | 25 | 32 ～ 60 | 40 ～ 60 | 16 ～ 25 | 40 | 32 ～ 40 | 60 | - | - | 10 ～ 16 | 16 ～ 20 | 25 | 16 ～ 25 | 16 ～ 25 | 16 | 25 ～ 32 | 8 | 16 | 10 ～ 40 | 16 | 20 ～ 25 | 8 ～ 25 | 12 ～ 16 | 10 ～ 16 | 10 ～ 12 | 10 ～ 25 | 16 | 6 ～ 16 | 10 ～ 12 | 5 ～ 12 | 6 ～ 10 | 25 | 32 ～ 40 |
| Protrusion length (L/D) | - | - | - | - | - | - | 64 ～ 200 | - | - | 24～64 | 9 to 24 ～ 80 | 120 | 37.5～100 | - | - | 20 | - | - | - | - | - | 60 ～ 96 | 24～64 ～ 80 | 15–40 | 64 ～ 100 | 64 ～ 100 | 24～64 | 100 ～ 128 | 9 to 24 | 24～64 | 15–40 ～ 160 | 24～64 | 30~80 ～ 100 | 12～32 ～ 37.5～100 | 18～48 ～ 24～64 | 60 ～ 96 | 60–100 ～ 120 | 15–40 ～ 37.5～100 | 24～64 | 9 to 24 ～ 32 | 100 ～ 120 | 7.5～20 ～ 72 | 9 to 24 ～ 15–40 | 37.5～100 | 48～128 ～ 60～160 |
| Lubrication Hole Y/N | - | - | - | - | - | N/A | Available | N/A | - | Available | Available | N/A | Available | Available | Available | Available | Available | Available | Available | - | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available / N/A | Available | Available | Available | Available | Available | N/A | Available | Available | Available | N/A | Available | Available | Available | Available |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Tip Shape
-
Minimum Machining Diameter
- 0.3
- 0.5
- 0.6
- 0.6 1.0 2.0 2.8 3.0 4.0 5.0
- 0.9
- 1
- 1.5
- 1.95
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 5
- 5.2
- 5.5
- 6
- 6.0 6.6 8.0
- 6.0 6.6 8.0 8.8 11.0
- 6.0 6.8 7.0
- 6.2
- 6.5
- 6.604
- 7
- 7.2
- 7.5
- 8
- 8.2042
- 8.5
- 8.6868
- 9
- 10
- 10.2108
- 10.4902
- 11
- 12
- 12.192
- 12.5
- 12.7
- 13
- 14
- 15
- 15.1892
- 16
- 16.3068
- 17
- 17.2974
- 18
- 18.4912
- 18.9992
- 19
- 19.6088
- 19.9898
- 20
- 20/30
- 20.1
- 20.5
- 20.62
- 21
- 21.59
- 22
- 23
- 23.5966
- 24.892
- 24.9
- 24.99
- 24.9936
- 24.994
- 25
- ø25
- 25/37
- 25.4
- 25.7048
- 26
- 26.01
- 26.6954
- 27
- 28
- 30
- 30.505
- 30.5054
- 31
- 31.496
- 31.5
- 31.801
- 32
- ø32
- 32.004
- 32.5
- 32.512
- 32.9946
- 32.995
- 33
- 34
- 35
- 35.45
- 36.45
- 37
- 37.287
- 37.2872
- 37.313
- 37.45
- 38
- 38.1
- 38.45
- 38.913
- 39
- 39.45
- 40
- 40/55
- 40.005
- 40.01
- 40.1
- 40.1066
- 40.132
- 40.45
- 41
- 41.45
- 41.5
- 42.0
- 42.45
- 43.307
- 43.45
- 44
- ø44
- 44.45
- 44.704
- 45
- 45.0088
- 45.45
- 46
- 46.45
- 46.99
- 47
- 47.45
- 48
- 48.45
- 49
- 49.3014
- 49.45
- 50
- 50/75
- 50.01
- 50.0126
- 50.038
- 50.45
- 50.8
- 51
- 51.45
- 52
- 52.45
- 53
- 53.45
- 54.0004
- 54.45
- 54.99
- 55
- 55.35
- 56
- 56.35
- 57
- 57.35
- 58
- 58.35
- 59.35
- 59.99
- 60
- 60/75
- 60.35
- 61.01
- 61.011
- 61.35
- 62
- ø62
- 62.35
- 62.992
- 63
- 63.35
- 63.5
- 63.98
- 64
- 64.35
- 64.7954
- 65
- 65.35
- 66.35
- 67.35
- 67.894
- 68
- 68.35
- 69
- 69.35
- 70
- 70/90
- 70.35
- 71.35
- 72
- 72.35
- 73.35
- 74.35
- 75
- 75.01
- 75.35
- 76.35
- 77.013
- 77.35
- 78.35
- 79
- 79.35
- 80
- 80.01
- 80.35
- 81.35
- 82.35
- 82.499
- 83
- 83.35
- 84.35
- 85
- 85.35
- 86
- 86.35
- 87.35
- 88
- ø88
- 88.35
- 89
- 89.35
- 90
- 90.35
- 98
- 99
- 99.9998
- 100
- 101
- 105
- 106
- 109
- 111.35
- 115
- 119.9896
- 120
- 123
- ø125
- 130
- 132.35
- 135
- 136
- 139.7
- 140
- 145
- 148
- 150
- 153.35
- 166
- 170
- 172.72
- 175
- 188
- 198
- 212
- 220
- 223.52
- 228
- 248
- 250
- 258
- 275
- 279.4
- 298
- 378
- 458
- 538
- 778
- 1018
-
Application
-
Cutting Direction
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Lever lock
- Wedge Lock
- Other
-
Overall Length L1
-
Clearance angle
-
Shank diameter
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Narrow search by specifying Brand
-
- SANDVIK (289)
- KYOCERA (59)
- ISCAR (10)
- BIG KAISER (9)
- MANYO TOOLS (6)
- SHOWA TOOL (1)
- THE CUT (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for I.D. Tuning
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.