SANKO MFG Square End Mills (HSS)（Machining Application：Side）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
KHB2TS Hybrid Short 2-Flute Blade
SANKO MFG
A 2-flute end mill for finish machining. Abrasion resistance is excellent and high efficiency machining is possible.
[Features]
· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).
· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.
· Furthermore, machining speed is equivalent to carbide, providing "high efficiency and safety".
· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.Starting from∗ ： 53.75 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
P-VS2T P Coated 2-Flute Short Blade
SANKO MFG
[Features]
· P coating provides excellent surface flatness and abrasion resistance.
· A 2-flute end mill for finish machining.Starting from∗ ： 36.24 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SS2T S Coated Estech 2-Flute Short
SANKO MFG
2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.Starting from∗ ： 53.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SS2TM S Coated Estech 2-Flute Regular
SANKO MFG
[Features]
· 2-flute finishing endmill with TiCN coating.
· Can be used widely for milling of grooves, sides, holes, etc.
· Enables a wide range of machining applications, due to the regular flute length.
· High grade powder metallurgy HSS with S-coating.
· Enables a wide range of machining applications, due to the regular flute length.Starting from∗ ： 53.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SS2TL S Coated Estech 2-Flute Long
SANKO MFG
[Features]
· 2-flute finishing endmill with TiCN coating.
· Can be used widely for milling of grooves, sides, holes, etc.
· Enables a wide range of side machining and deep engraving, due to the long flute length.
· High grade powder metallurgy HSS with S-coating.Starting from∗ ： 66.11 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
STEC2T ESTECH 2-Flute Short Blade
SANKO MFG
[Features]
· A 2-flute end mill for finish machining.
· Can be used widely for milling of grooves, sides, holes, etc.
· Uses high grade powder metallurgy HSS.Starting from∗ ： 45.55 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
STEC2TM ESTECH 2-Flute Regular Blade
SANKO MFG
[Features]
· A 2-flute end mill for finish machining.
· Can be used widely for milling of grooves, sides, holes, etc.
· Uses high grade powder metallurgy HSS.
· Enables a wide range of machining applications, due to the regular flute length.Starting from∗ ： 44.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
STEC2TL ESTECH 2-Flute Long Blade
SANKO MFG
[Features]
· A 2-flute end mill for finish machining.
· Can be used widely for milling of grooves, sides, holes, etc.
· Uses high grade powder metallurgy HSS.
· Enables a wide range of side machining and deep engraving, due to the long flute length.Starting from∗ ： 54.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
VS2T 2-Flute Short
SANKO MFG
A 2-flute end mill for finishing.
Materials: HS-Co (cobalt high-speed steel)
Outer diameter tolerance: -0.03 to 0
Helix angle: 30°
Cutting tip shape: Sharp corner.Starting from∗ ： 27.81 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
VSM2T 2-Flute Regular
SANKO MFG
A 2-flute end mill for finish machining. Enables a wide range of machining applications, due to the regular flute length.Starting from∗ ： 27.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
LVS2T 2-Flute Blade Long Blade
SANKO MFG
A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.- Volume Discount
Starting from∗ ： 32.70 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
KHB4TS Hybrid Short 4-Flute Blade
SANKO MFG
[Features]
· A 4-flute end mill for finish machining.
· Abrasion resistance is excellent and high efficiency machining is possible.
· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).
· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.
· Furthermore, machining speed is equivalent to carbide, providing "high functionality and safety".
· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.Starting from∗ ： 59.24 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
P-VS3T P Coated 3-Flute Short Blade
SANKO MFG
[Features]
· A 3-flute end mill for finish machining.
· P coating provides excellent surface flatness and abrasion resistanceStarting from∗ ： 39.92 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
P-VS4T P Coated 4-Flute Short Blade
SANKO MFG
[Features]
· A 4-flute end mill for finish machining.
· P coating provides excellent surface flatness and abrasion resistance.Starting from∗ ： 39.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SS4T S Coated Estech 4-Flute Short
SANKO MFG
[Features]
· 4-flute finishing endmill with TiCN coating.
· High grade powder metallurgy HSS with S-coating.
· Ideal for Finish MachiningStarting from∗ ： 59.01 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
SS4TL S Coated Estech 4-Flute Long
SANKO MFG
[Features]
· 4-flute finishing endmill with TiCN coating.
· Enables a wide range of side machining and deep engraving, due to the long flute length.
· High grade powder metallurgy HSS with S-coating.Starting from∗ ： 72.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
STEC4T ESTECH 4-Flute Short Blade
SANKO MFG
[Features]
· Uses high grade powder metallurgy HSS.
· Ideal for finish machining.
· A 4-flute end mill for finish machining.Starting from∗ ： 50.08 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
STEC4TL ESTECH 4-Flute Long Blade
SANKO MFG
A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.Starting from∗ ： 59.87 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
VS4T 4-Flute Short
SANKO MFG
[Features]
· A 4-flute end mill for finish machining.
· The outer diameter tolerance is negative (φ2-50).Starting from∗ ： 22.03 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
VSM4T 4-Flute Regular
SANKO MFG
A 4-flute end mill for finish machining. The outer diameter tolerance is positive.Starting from∗ ： 30.63 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
LVS4T 4-Flute Blade Long Blade
SANKO MFG
A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.- Volume Discount
Starting from∗ ： 36.24 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
SL Regular Slotting Blade
SANKO MFG
An end mill with a straight blade and 2 cutting edges.
Materials: HS-Co (cobalt high-speed steel)
Outer diameter tolerance: -0.03 to 0
Straight blade.Starting from∗ ： 29.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| work material |
| Blade shape type |
| Number of flutes(sheet) |
| Tool Material Type |
| Machining Application |
| Shank diameter (d)(mm) |
| Coating |
| Overall Length (L)(mm) |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Underneck length (ℓ1)(mm) |
| shank |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG |
| Product Series | ||||||||||||||||||||||
| Starting from∗ | 53.75 € *Unit price with basic configuration | 36.24 € *Unit price with basic configuration | 53.75 € *Unit price with basic configuration | 53.75 € *Unit price with basic configuration | 66.11 € *Unit price with basic configuration | 45.55 € *Unit price with basic configuration | 44.43 € *Unit price with basic configuration | 54.34 € *Unit price with basic configuration | 27.81 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 27.02 € *Unit price with basic configuration | 32.70 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 59.24 € *Unit price with basic configuration | 39.92 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 39.92 € *Unit price with basic configuration | 59.01 € *Unit price with basic configuration | 72.69 € *Unit price with basic configuration | 50.08 € *Unit price with basic configuration | 59.87 € *Unit price with basic configuration | 22.03 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 30.63 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 36.24 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 29.40 € *Unit price with basic configuration |
| Min. Shipping Days ： | 8 Days | 8 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | Same day | 6 Days | Same day | 8 Days | Same day | 6 Days | 7 Days | 6 Days | 8 Days | 8 Days | Same day | Same day | Same day | 6 Days |
| Blade diameter (D)(φ) | 5 ～ 30 | 3 ～ 30 | 1 ～ 40 | 3 ～ 20 | 3 ～ 40 | 1 ～ 40 | 3 ～ 20 | 3 ～ 30 | 1 ～ 60 | 3 ～ 14 | 3 ～ 50 | 5 ～ 30 | 3 ～ 30 | 3 ～ 30 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 | 3 ～ 60 | 3 ～ 40 | 3 ～ 60 | 2 ～ 49 |
| Blade length (ℓ)(mm) | 10 ～ 55 | 8 ～ 55 | 2 ～ 65 | 10 ～ 55 | 15 ～ 105 | 2 ～ 65 | 10 ～ 55 | 15 ～ 105 | 2 ～ 85 | 10 ～ 35 | 20 ～ 250 | 15 ～ 55 | 10 ～ 55 | 10 ～ 55 | 10 ～ 65 | 15 ～ 105 | 10 ～ 65 | 15 ～ 105 | 10 ～ 85 | 10 ～ 65 | 20 ～ 300 | 10 ～ 60 |
| work material | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] |
| Blade shape type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 3 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 2 |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS |
| Machining Application | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side |
| Shank diameter (d)(mm) | 8 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 20 | 6 ～ 32 | 6 ～ 32 | 6 ～ 20 | 6 ～ 25 | 6 ～ 42 | 6 ～ 12 | 6 ～ 42 | 8 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 32 |
| Coating | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiCN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 60 ～ 135 | 50 ～ 135 | 50 ～ 150 | 60 ～ 130 | 55 ～ 190 | 50 ～ 150 | 60 ～ 130 | 55 ～ 185 | 50 ～ 185 | 50 ～ 90 | 60 ～ 345 | 60 ～ 135 | 50 ～ 135 | 50 ～ 135 | 50 ～ 150 | 55 ～ 190 | 50 ～ 150 | 55 ～ 190 | 50 ～ 185 | 50 ～ 150 | 60 ～ 395 | 60 ～ 170 |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | No torsion |
| Base Blade Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
-
-
Blade length (ℓ)(mm)
-
work material
-
Blade shape type
- Square
- For Keyway
-
Number of flutes(sheet)
-
Tool Material Type
-
Machining Application
-
Shank diameter (d)(mm)
-
Coating
-
Overall Length (L)(mm)
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Underneck length (ℓ1)(mm)
-
shank
Narrow search by specifying Brand
-
- MISUMI (40)
- OSG (48)
- SANKO MFG (22)
- NACHI(FUJIKOSHI) (21)
- FUKUDA (12)
- ASAHI TOOLS (4)
- EIKOSHA (2)
- ESCO (0)
- DAIICHITOOL (0)
- TAIYO-TOOL (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Square End Mills (HSS)
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.