SANKO MFG Roughing End Mills (HSS)（Machining Application：Side）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 10 Days or Less 11 Days or Less 15 Days or Less

?* Information on days to ship and prices

αFS α Flat Nick Roughing Short Blade

SANKO MFG

A flat nick type roughing end mill. Semi-finishing is possible.

Starting from^∗ ：	77.36 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

P-XαS P Coated X α Nick Short Blade

SANKO MFG

A semi-fine pitch type roughing end mill. Excellent chip discharge.

Starting from^∗ ：	68.55 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

P-XαM P Coated X α Nick Regular Blade

SANKO MFG

[Features]
· A semi-fine pitch type P-XαS roughing end mill.
· Excellent chip discharge.
· Enables a wide range of machining applications, due to the regular flute.

Starting from^∗ ：	87.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SSα S Coated Estech α Nick

SANKO MFG

Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible.

Starting from^∗ ：	87.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSαM S Coated Estech α Nick Regular Blade

SANKO MFG

[Features]
· Semi-fine pitch type roughing endmill with TiCN coating.
· Extended periods of machining with hard-to-cut materials are possible.
· Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	104.62 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSα L S Coated Estech α Nick Long Blade

SANKO MFG

[Features]
· Semi-fine pitch type roughing endmill with TiCN coating.
· Extended periods of machining with hard-to-cut materials are possible.
· Enables deep engraving, due to the long flute length.

Starting from^∗ ：	118.21 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SSαLS S Coated Estech α Nick Long Shank

SANKO MFG

Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible. The long shank allows for machining in deep sections.

Starting from^∗ ：	148.58 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S-FPαS S-Coated Fine Pitch Short Blade

SANKO MFG

Fine pitch type roughing endmill with TiCN coating. Machining allowance can be reduced when performing finish machining.

Starting from^∗ ：	77.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

S-FPαM S-Coated Fine Pitch Regular Blade

SANKO MFG

[Features]
· Fine pitch type roughing endmill with S coating.
· Machining allowance can be reduced when performing finish machining.
· Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	83.70 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

S-FPαL S-Coated Fine Pitch Long Blade

SANKO MFG

[Features]
· Fine pitch type roughing endmill with S coating.
· Machining allowance can be reduced when performing finish machining.
· Enables a wide range of machining and deep engraving, due to the long flute length.

Starting from^∗ ：	155.58 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S-αS S-Coated Alpha Nick Short Blade

SANKO MFG

[Features]
· Standard pitch type roughing endmill with TiCN coating.

Starting from^∗ ：	78.70 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S-αM S-Coated Alpha Nick Regular Blade

SANKO MFG

Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	85.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S-αL S-Coated Alpha Nick Long Blade

SANKO MFG

Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining and deep engraving, due to the long flute length.

Starting from^∗ ：	190.02 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S- αH S Coating α Nick Hard Type

SANKO MFG

Hard pitch type roughing endmill with TiCN coating. Ideal for heavy duty groove cutting.

Starting from^∗ ：	75.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S-αHM S-Coated Alpha Nick Hard Type Regular Blade

SANKO MFG

[Features]
· Hard pitch type roughing endmill with S coating.
· Ideal for heavy duty groove cutting.
· Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	82.60 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

αS α Nick Roughing Short Blade

SANKO MFG

Roughing cutter with normal pitch.
Type of cutting edge
Materials: Hs-Co (cobalt high-speed steel)
Helix angle: 30°
Nick shape: standard pitch-nick.

Starting from^∗ ：	49.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

αM α Nick Roughing Regular Blade

SANKO MFG

A standard pitch type roughing end mill. Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	80.53 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

αL α Nick Roughing Long Blade

SANKO MFG

A standard pitch type roughing end mill. Enables a wide range of machining and deep engraving, due to the long flute length.

Starting from^∗ ：	125.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

α H α Nick Hard Type

SANKO MFG

A hard pitch type roughing end mill. Ideal for heavy duty groove cutting.

Starting from^∗ ：	47.51 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

αHM α Nick Roughing Hard Type Regular-Blade Type

SANKO MFG

A hard pitch type roughing end mill. Ideal for heavy duty groove cutting. Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	54.59 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S-SUSα Stainless Steel Groove Processing

SANKO MFG

[Features]
· A flat nick type roughing end mill.
· Ideal for grooving of stainless steel.

Starting from^∗ ：	49.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

ALα Alpha Nick for Aluminum

SANKO MFG

Ideal for roughing aluminum material. Capable of machining grooves up to 1.5D.

[Features]
· Endmill dedicated to machining aluminum sashes.

Volume Discount

Starting from^∗ ：	43.71 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
work material
Blade shape type
Number of flutes(sheet)
Tool Material Type
Machining Application
Shank diameter (d)(mm)
Coating
Overall Length (L)(mm)
Torsion Angle (θ)
Base Blade Y/N
Underneck length (ℓ1)(mm)
shank

																						Promotional pricing ends 31/12/2024
Brand	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG
Product Series	αFS α Flat Nick Roughing Short Blade	P-XαS P Coated X α Nick Short Blade	P-XαM P Coated X α Nick Regular Blade	SSα S Coated Estech α Nick	SSαM S Coated Estech α Nick Regular Blade	SSα L S Coated Estech α Nick Long Blade	SSαLS S Coated Estech α Nick Long Shank	S-FPαS S-Coated Fine Pitch Short Blade	S-FPαM S-Coated Fine Pitch Regular Blade	S-FPαL S-Coated Fine Pitch Long Blade	S-αS S-Coated Alpha Nick Short Blade	S-αM S-Coated Alpha Nick Regular Blade	S-αL S-Coated Alpha Nick Long Blade	S- αH S Coating α Nick Hard Type	S-αHM S-Coated Alpha Nick Hard Type Regular Blade	αS α Nick Roughing Short Blade	αM α Nick Roughing Regular Blade	αL α Nick Roughing Long Blade	α H α Nick Hard Type	αHM α Nick Roughing Hard Type Regular-Blade Type	S-SUSα Stainless Steel Groove Processing	ALα Alpha Nick for Aluminum
Starting from^∗	77.36 € *Unit price with basic configuration	68.55 € *Unit price with basic configuration	87.15 € *Unit price with basic configuration	87.75 € *Unit price with basic configuration	104.62 € *Unit price with basic configuration	118.21 € *Unit price with basic configuration	148.58 € *Unit price with basic configuration	77.23 € *Unit price with basic configuration	83.70 € *Unit price with basic configuration	155.58 € *Unit price with basic configuration	78.70 € *Unit price with basic configuration	85.15 € *Unit price with basic configuration	190.02 € *Unit price with basic configuration	75.15 € *Unit price with basic configuration	82.60 € *Unit price with basic configuration	49.83 € *Unit price with basic configuration	80.53 € *Unit price with basic configuration	125.23 € *Unit price with basic configuration	47.51 € *Unit price with basic configuration	54.59 € *Unit price with basic configuration	49.33 € *Unit price with basic configuration	43.71 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount
Min. Shipping Days ：	8 Days	6 Days	8 Days	6 Days	6 Days	8 Days	8 Days	6 Days	7 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	6 Days	8 Days	6 Days	6 Days	8 Days	6 Days	Same day
Blade diameter (D)(φ)	10 ～ 50	5 ～ 50	5 ～ 40	5 ～ 40	5 ～ 50	6 ～ 50	16 ～ 50	5 ～ 50	5 ～ 50	10 ～ 50	5 ～ 50	10 ～ 50	14 ～ 50	5 ～ 50	6 ～ 50	5 ～ 60	10 ～ 50	14 ～ 60	5 ～ 50	6 ～ 50	3 ～ 30	6 ～ 40
Blade length (ℓ)(mm)	25 ～ 80	10 ～ 80	15 ～ 100	10 ～ 65	15 ～ 120	30 ～ 150	40 ～ 75	10 ～ 80	15 ～ 120	45 ～ 150	10 ～ 80	35 ～ 120	65 ～ 200	8 ～ 75	15 ～ 110	10 ～ 95	35 ～ 120	65 ～ 300	8 ～ 75	15 ～ 110	5 ～ 55	15 ～ 65
work material	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎]	Aluminum[◎]
Blade shape type	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing
Number of flutes(sheet)	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 4	3 ～ 4
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Machining Application	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side
Shank diameter (d)(mm)	10 ～ 42	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 42	6 ～ 42	16 ～ 42	6 ～ 42	6 ～ 42	10 ～ 42	6 ～ 42	10 ～ 42	16 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	10 ～ 42	16 ～ 42	6 ～ 42	6 ～ 42	6 ～ 25	6 ～ 32
Coating	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Overall Length (L)(mm)	90 ～ 200	70 ～ 200	80 ～ 220	70 ～ 185	80 ～ 220	80 ～ 250	180 ～ 320	70 ～ 200	80 ～ 240	100 ～ 270	70 ～ 200	100 ～ 240	145 ～ 320	55 ～ 165	60 ～ 200	70 ～ 210	100 ～ 240	145 ～ 420	55 ～ 165	60 ～ 200	55 ～ 165	70 ～ 185
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)
Base Blade Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Blade diameter (D)(φ)
- 3～3.5
  - 3
  - 3.5
- 4～4.5
  - 4
  - 4.5
- 5～5.5
  - 5
  - 5.5
- 6～6.5
  - 6
  - 6.5
- 7～7.5
  - 7
  - 7.5
- 8～8.5
  - 8
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11～11.5
  - 11
  - 11.5
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.5
- 15～15.5
  - 15
  - 15.5
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18～18.5
  - 18
  - 18.5
- 19～19.5
  - 19
  - 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 55
- 60
Drawing

Clear

Blade length (ℓ)(mm)
5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

22

24

25

26

28

30

32

34

35

36

38

40

45

48

50

53

55

56

60

63

65

67

68

70

75

80

90

95

100

105

106

110

112

115

120

122

125

130

140

145

150

160

180

200

212

250

300
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
Details

Clear

Blade shape type
- Square
- Roughing
Clear

Number of flutes(sheet)
3

4

5

6

8
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- Alloy HSS
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
Images

Clear

Shank diameter (d)(mm)
6

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Overall Length (L)(mm)
- 50～57
  - 50
  - 55
  - 56
  - 57
- 60～69
  - 60
  - 63
  - 65
  - 66
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 75
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 86
  - 88
  - 89
- 90～97
  - 90
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 102
  - 104
  - 105
  - 108
- 110～115
  - 110
  - 115
- 120～125
  - 120
  - 121
  - 122
  - 123
  - 125
- 130～135
  - 130
  - 133
  - 135
- 140～145
  - 140
  - 141
  - 143
  - 144
  - 145
- 150～155
  - 150
  - 155
- 160～166
  - 160
  - 165
  - 166
- 170～177
  - 170
  - 175
  - 177
- 180～186
  - 180
  - 185
  - 186
- 190～197
  - 190
  - 195
  - 197
- 200～205
  - 200
  - 205
- 210～215
  - 210
  - 214
  - 215
- 220～227
  - 220
  - 225
  - 227
- 230～235
  - 230
  - 235
- 240
- 250～252
  - 250
  - 252
- 260
- 270
- 280～285
  - 280
  - 285
- 290
- 310～315
  - 310
  - 315
- 320
- 340
- 350
- 370
- 390
- 420
Drawing

Clear