YAMAWA MFG Spiral Taps（work material：Low-Carbon Steel (carbon alloy less than 0.25%)）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Promotional pricing ends 30/11/2024

Spiral Flute Tap SP (N-SP)

YAMAWA MFG

The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
[Features]
・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
・ Intermittent cutting of female threads with keyway is also possible.
・ Capable of machining both synchronously and asynchronously.
・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
・ The tap can easily cut.
・ Intermittent cutting of pilot holes with keyway is also possible.
・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
[Applications]
・ Ideal for machining blind holes.

Volume Discount

Starting from^∗ ：	8.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Plus Series Spiral Tap +SP (N+SP)

YAMAWA MFG

A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

Volume Discount

Starting from^∗ ：	17.48 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Spiral Tap For Through Holes & Trapezoidal Threads SL Tr

YAMAWA MFG

[Features]
· The angle of the thread crest is 30°.
· The symbol used for the thread is represented by "Tr."

Starting from^∗ ：	327.22 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL

YAMAWA MFG

We have adopted the side through-hole shape by dry machining and ultra-high-speed machining.

Volume Discount

Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the vertical direction processing.

Volume Discount

Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP

YAMAWA MFG

Volume Discount

Starting from^∗ ：	36.15 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Spiral Tap for Stainless Steel Through Holes SU+SL

YAMAWA MFG

Work hardening in blind hole processing of significantly gummy materials, from stainless steel and chrome steel to molybdenum steel. Processable in mid-speed range of 10 M/MIN ~ 20 M/MIN.

Starting from^∗ ：	11.86 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Titanium Coated Through Hole Spiral Tap AU+SL

YAMAWA MFG

Coated Spiral Tap For Through Hole Drilling Suited For Stable Mid-Speed (10 to 25m/minute) Threading in Both Synchronous and Asynchronous Machining

Volume Discount

Starting from^∗ ：	21.06 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap for Nickel Base Alloy ZEN-B

YAMAWA MFG

A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

Volume Discount

Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Coating Spiral Tap AU+ SP

YAMAWA MFG

Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.

Volume Discount

Starting from^∗ ：	21.66 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Through Holes for High Speed F-SL

YAMAWA MFG

Capable of 20/MIN ~ 30/MIN high-speed processing. Use of Medium or Low Speeds at 15M/MIN or Less Will Cause a Poor Shape and Poor Emission of Chips, Causing Trouble to Occur

Volume Discount

Starting from^∗ ：	29.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for High Speed F-SP

YAMAWA MFG

Capable of 20/MIN ~ 30/MIN high-speed processing. Use of medium or low speeds at 15M/MIN or less will cause a poor shape and poor emission of chips, causing trouble to occur.

Volume Discount

Starting from^∗ ：	29.58 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Spiral Tap For High Carbon Steel HC+SP / HC-SP

YAMAWA MFG

It is suitable for tapping high carbon steel such as S55C.

Volume Discount

Starting from^∗ ：	10.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX

YAMAWA MFG

Suitable for tapping high carbon steel like S55C etc. Has undergone oxidation treatment.

Volume Discount

Starting from^∗ ：	11.36 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Short Spiral Tap for Deep Holes S-SP

YAMAWA MFG

Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.

Volume Discount

Starting from^∗ ：	12.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap For Soft Steel / Esper E-SP

YAMAWA MFG

A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).

Volume Discount

Starting from^∗ ：	12.18 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP

YAMAWA MFG

Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

Volume Discount

Starting from^∗ ：	13.71 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL

YAMAWA MFG

[Features]
· Ideal for S48C to S55C forged products and tempered materials (20 to 30 HRC).
· Realizes longer life by adopting a special coating and high-speed steel material for abrasion resistance.
· Adopts an original groove shape that realizes stable scrap discharge at medium speeds.
· Improves the surface roughness of female threads.

Volume Discount

Starting from^∗ ：	37.30 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Long-Shank Spiral Tap For High-Speeds & Through Holes LS-F-SL

YAMAWA MFG

[Features]
· A long-shank spiral tap for through holes. For use in high-speed machining between 15 m/min and 25 m/min.

Volume Discount

Starting from^∗ ：	53.11 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Long-Shank Spiral Tap For High-Speeds LS-F-SP

YAMAWA MFG

[Features]
· A long-shank spiral tap for use in high-speed machining between 15 m/min and 25 m/min.

Volume Discount

Starting from^∗ ：	53.11 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Spiral Tap For Through Holes & Trapezoidal Threads, For Left-Handed Threads SL LH Tr

YAMAWA MFG

[Features]
· The angle of the thread crest is 30°.
· The symbol used for the thread is represented by "Tr."

Starting from^∗ ：	391.90 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Spiral Tap For Stainless Steel, Parallel Pipe Threads SU-SP-PF

YAMAWA MFG

[Features]
· A spiral tap. Suitable for machining stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.

Volume Discount

Starting from^∗ ：	39.39 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Promotional pricing ends 30/11/2024							Promotional pricing ends 30/11/2024									Promotional pricing ends 30/11/2024
Brand	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Spiral Flute Tap SP (N-SP)	Plus Series Spiral Tap +SP (N+SP)	Spiral Tap For Through Holes & Trapezoidal Threads SL Tr	HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL	HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS	HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP	Spiral Tap for Stainless Steel Through Holes SU+SL	Titanium Coated Through Hole Spiral Tap AU+SL	Spiral Tap for Nickel Base Alloy ZEN-B	Coating Spiral Tap AU+ SP	Spiral Tap for Through Holes for High Speed F-SL	Spiral Tap for High Speed F-SP	Spiral Tap For High Carbon Steel HC+SP / HC-SP	Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX	Short Spiral Tap for Deep Holes S-SP	Spiral Tap For Soft Steel / Esper E-SP	Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP	Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL	Long-Shank Spiral Tap For High-Speeds & Through Holes LS-F-SL	Long-Shank Spiral Tap For High-Speeds LS-F-SP	Spiral Tap For Through Holes & Trapezoidal Threads, For Left-Handed Threads SL LH Tr	Spiral Tap For Stainless Steel, Parallel Pipe Threads SU-SP-PF
Starting from^∗	8.94 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	17.48 € *Unit price with basic configuration Volume Discount	327.22 € *Unit price with basic configuration	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	11.86 € *Unit price with basic configuration	21.06 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	21.66 € *Unit price with basic configuration Volume Discount	29.58 € *Unit price with basic configuration Volume Discount	29.58 € *Unit price with basic configuration Volume Discount	10.27 € *Unit price with basic configuration Volume Discount	11.36 € *Unit price with basic configuration Volume Discount	12.65 € *Unit price with basic configuration Volume Discount	12.18 € *Unit price with basic configuration Volume Discount	13.71 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	37.30 € *Unit price with basic configuration Volume Discount	53.11 € *Unit price with basic configuration Volume Discount	53.11 € *Unit price with basic configuration Volume Discount	391.90 € *Unit price with basic configuration	39.39 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	Same day	8 Days	7 Days	8 Days	8 Days	7 Days	6 Days	Same day	6 Days	6 Days	6 Days	7 Days	6 Days	8 Days	6 Days	6 Days	Same day	8 Days	8 Days	8 Days	7 Days	8 Days
Screw Types	Meter	Meter	Trapezoid	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Whitworth	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Trapezoid	Parallel for Pipes
Screw size (Nominal)	M3 ～ M12	M2.2	Tr 10 ～ Tr 30	M6 ～ M20	M6 ～ M20	M6 ～ M20	M3 ～ M6	M3 ～ M6	M3 ～ M20	M2 ～ M12	M3 ～ M12	M3 ～ M12	1/2W12 ～ M30	M3 ～ M16	M2 ～ M45	M3 ～ M24	M3 ～ M24	-	M3 ～ M30	M3 ～ M30	Tr 10 ～ Tr 30	PF 1 ～ PF 3/8
Pitch (P), Number of Threading(mm)	0.5 ～ 1.25	0.45	2 ～ 6	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	0.5 ～ 1	0.5 ～ 1	0.5 ～ 2.5	0.4 ～ 1.75	0.5 ～ 1.75	0.5 ～ 1.75	0.5 ～ 3	0.5 ～ 2	0.4 ～ 4.5	0.5 ～ 3	0.5 ～ 3	-	0.5 ～ 3.5	0.5 ～ 3.5	2 ～ 6	11 ～ 28
Chamfer threads (Lcf)	2.5P	2.5P	22P ～ 30P	5P	2.5P	2.5P	5P	5P	3P	2.5P	5P	2.5P	2.5P	2.5P	2.5P	2.5P	3P	5P ～ 7P	5P ～ 5.5P	2.5P ～ 3P	22P ～ 30P	2.5P
Tool Material Type	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	High-speed steel
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]
Tap Type	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap
Hole type	For blind hole	For blind hole	For through hole	For through hole	For blind hole	For through hole / For blind hole	For through hole	For through hole	For blind hole	For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For through hole	For blind hole	For through hole	For blind hole
Coating Y/N	N/A	N/A	N/A	Available	Available	Available	N/A	Available	N/A	Available	Available	Available	N/A	N/A	N/A	N/A	N/A	Available	Available	Available	N/A	Available
Coating Type	-	-	-	TiCN	TiCN	TiCN	-	TiN	-	TiN	TiN	TiN	-	-	-	-	-	Other	-	-	-	Other
Overall Length (L)(mm)	46 ～ 82	42	160 ～ 300	62 ～ 105	62 ～ 105	62 ～ 105	46 ～ 62	46 ～ 62	46 ～ 105	42 ～ 82	46 ～ 82	46 ～ 82	46 ～ 135	46 ～ 95	42 ～ 180	46 ～ 120	46 ～ 120	-	100 ～ 200	100 ～ 200	160 ～ 300	59 ～ 109

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Parallel for Pipes
- Trapezoid
Clear

Screw size (Nominal)
No.10-32UNF

No.10-24UNC

No.2-56UNC

No.3-48UNC

No.4-48UNF

No.4-40UNC

No.5-44UNF

No.5-40UNC

No.6-40UNF

No.6-32UNC

No.8-36UNF

No.8-32UNC

1UN

1UNS

G 1"

M1

PF 1

UNC 1"

UNF 1"

W1

1'-12UNF

1-8UNC

1'-8UNC

1"1/2UN

W1"1/2

1 1/2-8UN

1"1/4UN

W1"1/4

1 1/4-8UN

1"1/8UN

W1"1/8

1 1/8-8UN

1/2UN

G 1/2

PF 1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-13UNC

1/2W12

1"3/4UN

1 3/4-8UN

1"3/8UN

W1"3/8

1 3/8-8UN

1/4UN

G 1/4

PF 1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

1/4W20

1 5/8-8UN

1 7/8-8UN

1'W8

G 1/8

PF 1/8

SM1/8

W1/8

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

M1.4

M1.6

M1.7

M1.8

M2

UNC 2

2-8UN

M2.2

M2.3

M2.5

M2.6

M3

3/4UN

G 3/4

PF 3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-10UNC

3/4W10

3/8UN

G 3/8

PF 3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-16UNC

3/8W16

M3 - M10

M3 - M12

SM3/16

W3/16

3/16W24

SM3/32

M3.5

M4

MF4

No4UN

UNC 4

UNF 4

№4-40UNC

M4.5

5M

M5

MF5

No5UN

UNC 5

№5-40UNC

5/8UN

G 5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

5/8W11

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

5.5M

M5.5

M6

MF6

No6UN

UNC 6

UNF 6

UNJC 6

№6-32UNC

M7

7 execution M3 - M12

7/8UN

G 7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/8W9

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

W7/16

7/16-20UNF

7/16-14UNC

7/16W14

M8

MF8

No8UN

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

M9

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

9/16W12

SM9/32

SM9/64

M10

MF10

No10UN

Tr10

Tr 10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M11

SM11/64

M12

MF12

Mf12

No12UN

Tr12

Tr 12

UNC 12

UNF 12

M12 x 1.5

M13

M14

MF14

Tr 14

M15

SM15/64

M16

MF16

Mf16

Tr16

Tr 16

M16 x 1.5

M17

M18

MF18

Tr18

Tr 18

M19

M20

MF20

Mf20

Tr 20

M20 x 1.5

M22

MF22

Tr 22

M23

M24

MF24

Tr 24

M25

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

Tr 26

M27

MF27

M28

MF28

Tr 28

M30

MF30

Tr 30

M32

Mf32

M33

M35

M36

M39

M42

M45

M48

M52

M56

M64
Clear

Pitch (P), Number of Threading(mm)
0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

12

13

14

16

18

19

20

24

28

32

36

40

44

48

56
Clear

Chamfer threads (Lcf)
1.5

1.5 P

1.5P

2P

2.5

2.5 P

2.5P

3P

5P

5.5P

7P

22P

22.5P

23P

24P

24.5P

25P

26P

27P

28P

30P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Hand Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiCN
- TiN
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

39

40

41

42

44

44.5

45

46

47.62

48

49.21

50

50.8

51

52

53

53.98

55

55.28

55.64

55.92

56

58

59

60

60.32

62

62.52

62.65

63

63.5

65

66

67

69.06

69.42

69.71

70

72

74.61

75

79.03

79.31

80

80.17

82

85

85.72

87

88

89

89.12

89.18

90

91.28

95

96

96.84

98.97

99.21

100

102

105

108

109

109.65

110

112

113.5

115

118

119

120

125

130

130.175

130.2

135

140

145

150

155

160

165

170

175

180

185

190

195

200

205

220

224

225

230

250

260

270

280

290

300

315
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (4)
- Cost Efficient Products ()
- YAMAWA MFG (22)
- OSG (10)
- NACHI(FUJIKOSHI) (6)
- SKC (2)
- TRUSCO NAKAYAMA (1)
- WALTER PROTOTYP (1)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- SANDVIK (0)
- ISHIHASHI (0)
- GEDORE (0)
- HAZET (0)
- GUHRING (0)
- WERA (0)
- FEIN (0)
- ESCO (0)
- REX TOOLS (0)
Clear