Set Collars / Clamping Rings（Surface Treatment：Surface Treatment Provided Page 3）
Filter products by: Tightening Method
-
Set Screw -
Slit -
Split -
Hinged -
Wedge -
One-Touch -
Surface Pressure
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Set collars / hexagonal / stainless steel, steel / slotted / SCS-H-H
IWATA MFG
[Features]
· Abundant variations you can only get from a top manufacturer.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 14.86 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / stainless steel, steel / slotted / damped / SCS-D
IWATA MFG
Abundant variations you can only get from a top manufacturer.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 8.96 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Set collars / flattened on one side / steel / two-piece / SCSS-CT
IWATA MFG
Abundant variations you can only get from a top manufacturer.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 18.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / stainless steel, steel / wedge clamping / triple cross hole / SCK-P3
IWATA MFG
This wedge has a special shape that enables stopping with a small amount of force.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 13.54 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Set collars / stainless steel, steel / wedge clamping / triple counterbore / SCK-Z3
IWATA MFG
This wedge has a special shape that enables stopping with a small amount of force.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 15.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / stainless steel, steel / wedge clamping / double cross thread / SCK-N2
IWATA MFG
This wedge has a special shape that enables stopping with a small amount of force.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 13.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / stainless steel, steel / wedge clamping / clamping lever, triple countersunk hole / SCK-Z3
IWATA MFG
This wedge has a special shape that enables stopping with a small amount of force.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 25.78 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / stainless steel, steel / wedge clamping / clamping lever, double cross thread / SCK-N2
IWATA MFG
This wedge has a special shape that enables stopping with a small amount of force.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 24.60 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / stainless steel, steel / wedge clamping / clamping lever, triple cross thread / SCK-N3
IWATA MFG
This wedge has a special shape that enables stopping with a small amount of force.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 25.38 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Set collars / flattened on one side / stainless steel, steel / wedge clamping / clamping lever, face thread / SCK-TN
IWATA MFG
Nickel plated machining lubricator series.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 29.37 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double Wide, Double-Split, Steel
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 12.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double Wide, Single-Split, Steel
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 11.25 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Single-Split, Aluminium Anodized
MAEDLER
Material: Aluminium anodized, screw stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 8.18 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Single-Split, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screw steel 12.9.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 3.36 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars with Thread, Steel
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Max. speed: 4,000 min-1.
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 6.05 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjusting Rings (Shaft Collars with Set Screw) According to the Old Standard DIN 703, Steel, Black Oxide Finish
MAEDLER
Material: Steel, black oxide finish.
Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.
* Size 20 is not part of the old standard DIN 703.- Volume Discount
Configure nowStarting from∗ ： 5.06 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type N, Steel, Black Oxide Fnish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type N: With keyway DIN 6885-1.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 6.95 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type GRK with Clamping Lever, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish.
Handle: Zinc die-cast, plastic coated, black.
Screw: Stainless steel 1.4305 (AISI 303).
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools.
Type GRK: With mounting flat and two radial mounting bores, with thread.
Tolerance b: +0.08 mm / -0.25 mm
Temperature resistant up to +90ºC.- Volume Discount
Configure nowStarting from∗ ： 17.81 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type GR, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type GR: With mounting flat and two radial mounting bores, with thread.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 8.92 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type GA, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type GA: With two axial mounting bores, with thread.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 8.48 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type B1: With two axial mounting bores.
Type B2: With two axial mounting bores, with sunk holes for cylindrical screws DIN 912.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.
* Fitting screw size for B1.
** Fitting screw size for B2.- Volume Discount
Configure nowStarting from∗ ： 7.68 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type N, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type N: With keyway DIN 6885-1.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 7.98 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type GR, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type GR: With mounting flat and two radial mounting bores, with thread.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 10.87 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type GA, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type GA: With two axial mounting bores, with thread.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 10.34 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type B1: With two axial mounting bores.
Type B2: With two axial mounting bores, with sunk holes for cylindrical screws DIN 912.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.
* Fitting screw size for B1.
** Fitting screw size for B2.- Volume Discount
Configure nowStarting from∗ ： 9.52 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, or zinc-plated.
Handle: Zinc die-cast, plastic coated, black.
Screw: Stainless steel 1.4305 (AISI 303).
Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.
The disengageable, adjustable clamping lever enables an easy readjustment without tools.
Tolerance b: +0.08 mm / -0.25 mm
Temperature resistant up to +90ºC.- Volume Discount
Configure nowStarting from∗ ： 10.35 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double-Split, Polyamide
MAEDLER
Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat.
Screws and nuts stainless steel 1.4404 (AISI 316 L).
Features: Strong version with metal nuts.
Easy to mount and quickly to adjust.
Does not damage the shaft.
Even distribution of clamping force.
Low mass inertia.
Suitable for use in corrosive atmospheres.
Temperature range: up to +80ºC.- Volume Discount
Configure nowStarting from∗ ： 8.46 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjusting Rings DIN 705 A, with Slotted Set Screw, Steel, Black Oxide Finish
MAEDLER
Material: Steel, black oxide finish.
Light-duty series. With set screw made from steel. Slotted set screw as in DIN EN 27434 (formerly DIN 553).
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.
* At size 9, the outer dimensions are not like DIN 705.- Volume Discount
Configure nowStarting from∗ ： 0.92 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Tightening Method |
| RoHS Information |
| Specifications |
| Features, Areas of Application |
| I.D.(mm) |
| O.D.(mm) |
| Width(mm) |
| Material |
| Surface Treatment |
| Thickness |
| Side Surface Machining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | IWATA MFG | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Set collars / hexagonal / stainless steel, steel / slotted / SCS-H-H | Set collars / stainless steel, steel / slotted / damped / SCS-D | Set collars / flattened on one side / steel / two-piece / SCSS-CT | Set collars / stainless steel, steel / wedge clamping / triple cross hole / SCK-P3 | Set collars / stainless steel, steel / wedge clamping / triple counterbore / SCK-Z3 | Set collars / stainless steel, steel / wedge clamping / double cross thread / SCK-N2 | Set collars / stainless steel, steel / wedge clamping / clamping lever, double cross thread / SCK-N2 | Set collars / stainless steel, steel / wedge clamping / clamping lever, triple cross thread / SCK-N3 | Shaft Collars, Clamp Collars Double Wide, Double-Split, Steel | Shaft Collars, Clamp Collars Double Wide, Single-Split, Steel | Shaft Collars, Clamp Collars Single-Split, Aluminium Anodized | Shaft Collars, Clamp Collars Single-Split, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Single-Split - Type N, Steel, Black Oxide Fnish | Shaft Collars, Clamp Collars, Single-Split - Type GRK with Clamping Lever, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Single-Split - Type GR, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Single-Split - Type GA, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Double-Split - Type N, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Double-Split - Type GR, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Double-Split - Type GA, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Steel, Black Oxide Finish | Adjusting Rings DIN 705 A, with Slotted Set Screw, Steel, Black Oxide Finish | |||||
| CAD |
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||
| Starting from∗ | 14.86 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 8.96 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 18.88 € *Unit price with basic configuration | 13.54 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 15.59 € *Unit price with basic configuration Volume Discount | 13.89 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 25.78 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 24.60 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 25.38 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 29.37 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 12.96 € *Unit price with basic configuration Volume Discount | 11.25 € *Unit price with basic configuration Volume Discount | 8.18 € *Unit price with basic configuration Volume Discount | 3.36 € *Unit price with basic configuration Volume Discount | 6.05 € *Unit price with basic configuration Volume Discount | 5.06 € *Unit price with basic configuration Volume Discount | 6.95 € *Unit price with basic configuration Volume Discount | 17.81 € *Unit price with basic configuration Volume Discount | 8.92 € *Unit price with basic configuration Volume Discount | 8.48 € *Unit price with basic configuration Volume Discount | 7.68 € *Unit price with basic configuration Volume Discount | 7.98 € *Unit price with basic configuration Volume Discount | 10.87 € *Unit price with basic configuration Volume Discount | 10.34 € *Unit price with basic configuration Volume Discount | 9.52 € *Unit price with basic configuration Volume Discount | 10.35 € *Unit price with basic configuration Volume Discount | 8.46 € *Unit price with basic configuration Volume Discount | 0.92 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | 6 Days | 6 Days | Same day | 6 Days | Same day | Same day | Same day | Same day | Same day | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Tightening Method | Slit | Slit | Split | Wedge | Wedge | Wedge | Wedge | Wedge | Wedge | Wedge | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| RoHS Information | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Specifications | Threaded Bore | With Urethane | D Cut | With Side Mounting Holes | With Side Mounting Holes | With Side Mounting Holes | With Clamp Lever / With Side Mounting Holes | With Clamp Lever / With Side Mounting Holes | With Clamp Lever / With Side Mounting Holes | With Clamp Lever / D Cut | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Features, Areas of Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D.(mm) | 10 ～ 35 | 3 ～ 50 | 15 ～ 40 | 10 ～ 50 | 10 ～ 50 | 10 ～ 50 | 10 ～ 50 | 10 ～ 50 | 10 ～ 50 | 10 ～ 50 | 6+0.05 ～ 50+0.12 | 6+0.05 ～ 50+0.12 | 3 ～ 50 | 3 ～ 100 | - | 20* ～ 90 | 8 ～ 60 | 10 ～ 50 | - | - | - | 8 ～ 60 | - | - | - | 5 ～ 60 | 12 ～ 40 | 3 ～ 70 |
| O.D.(mm) | 29 ～ 60 | 15 ～ 85 | 40 ～ 70 | 35 ～ 85 | 35 ～ 85 | 35 ～ 85 | 35 ～ 85 | 35 ～ 85 | 35 ～ 85 | 35 ～ 85 | 16 ～ 78 | 16 ～ 78 | 16 ～ 78 | 16 ～ 140 | 16 ～ 54 | 40 ～ 125 | 18 ～ 88 | 28 ～ 82 | 28 ～ 82 | 28 ～ 82 | 28 ～ 82 | 18 ～ 88 | 28 ～ 82 | 28 ～ 82 | 28 ～ 82 | 16 ～ 88 | 35 ～ 65 | 7 ～ 100 |
| Width(mm) | - | - | - | - | - | - | - | - | - | - | 20 ～ 41 | 20 ～ 41 | 9 ～ 19 | 9 ～ 32 | 9 ～ 15 | 20 ～ 32 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 13 ～ 14 | 5 ～ 20 |
| Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided |
| Thickness | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Side Surface Machining | Not Provided | Not Provided | Not Provided | 3-Hole | Counterbore 3-Hole | Screw 2-Hole | Counterbore 3-Hole | Screw 2-Hole | Screw 3-Hole | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
RoHS Information
-
Specifications
-
Standard -
With Clamp Lever -
For Bearing Mounting -
With Urethane -
With Side Mounting Holes -
D Cut -
2-Flat -
Threaded Bore -
With Key Relief Groove
-
-
Features, Areas of Application
-
I.D.(mm)
- 3
- 4
- 5
- 6
- 6+0.05
- 6.35
- 7
- 7.938
- 8
- 8+0.07
- 9
- 9.525
- 10
- 10+0.07
- 10.5
- 11
- 11.113
- 12
- 12+0.07
- 12.7
- 13
- 13.8
- 14
- 15
- 15.875
- 16
- 16+0.07
- 17
- 17.3
- 18
- 19
- 19.05
- 20
- 20*
- 20+0.07
- 21
- 21.7
- 22
- 22.225
- 23
- 23.813
- 24
- 25
- 25+0.07
- 25.4
- 26
- 27
- 27.2
- 28
- 28.575
- 30
- 30+0.12
- 31.75
- 32
- 34
- 34.925
- 35
- 36
- 38
- 38.1
- 40
- 40+0.12
- 42
- 42.7
- 44.45
- 45
- 48
- 48.6
- 50
- 50+0.12
- 50.8
- 52
- 55
- 56
- 57.15
- 58
- 60
- 63
- 63.5
- 65
- 68
- 70
- 72
- 75
- 76.2
- 80
- 85
- 90
- 100
- 110
- 120
- 125
- 130
- 140
-
O.D.(mm)
- 7
- 8
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 17.2
- 18
- 18*
- 18.7
- 19
- 20
- 21.7
- 22
- 23
- 24
- 24.2
- 25
- 26
- 27
- 28
- 29
- 29.2
- 30
- 31
- 32
- 33
- 33.2
- 34
- 34.5
- 35
- 35.5
- 36
- 38
- 39
- 40
- 40.2
- 41
- 42
- 43
- 44
- 45
- 46
- 46.2
- 47
- 48
- 49
- 50
- 51
- 51.5
- 52
- 52.2
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 65.4
- 66
- 66.5
- 68
- 69
- 70
- 72
- 73
- 75
- 76
- 78
- 79
- 79.5
- 80
- 81
- 82
- 83
- 85
- 86
- 88
- 90
- 93
- 94
- 95
- 98
- 100
- 103
- 105
- 108
- 110
- 113
- 115
- 119
- 125
- 126
- 130
- 140
- 150
- 160
- 170
- 180
- 200
-
Width(mm)
-
Material
- Steel
- Stainless Steel
- Aluminum
- Resin
-
Surface Treatment
- No Surface Treatment
- Surface Treatment Provided
- Black Anodized
- Zinc Plating
-
Thickness
-
Side Surface Machining
Brand
-
- IWATA MFG (51)
- MAEDLER (24)
- KATAYAMA CHAIN (4)
- KONISHI MFG (3)
- REYHER (1)
- HALDER (1)
- KBK (0)
- ELESA (0)
- NORELEM (0)
- GANTER (0)
- ESCO (0)
- KIPP (0)
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Examples how you can use these components
Categories related to Set Collars / Clamping Rings
-
- Linear Shafts
- Shaft Supports / Shaft Holders
- Set Collars / Clamping Rings
- Linear Bushings / Linear Ball Bearings / Linear Ball Bushings
- Ball Guides
- Spline Shaft
- Plain Bearing (Bushings, Washers, Semifinished Products)
- Plain Bearing (Plates, Guide Rails, Semifinished Products)
- Linear Guides
- Cable Carriers
- Ball Screws
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators
- Other Linear Motion Related Components
- Bellows
-
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.