Single Axis Actuators（Cover：N/A）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Single Axis Actuators LX20 Standard / Cover Type
MISUMI
[Specifications]
・Slider Material: Chrome Molybdenum Steel
・Accuracy: High Grade, Precision Grade
・Motor Mounting Posture: Straight
・Driving mode: Ground Ball Screw
・Screw Shaft Dia. (mm): 6
・Lead (mm): 1, 5- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 8 Days -
Single Axis Actuators LX30 / Standard Type
MISUMI
[Specifications]
・Slider Material: Chrome Molybdenum Steel
・Accuracy: High Grade, Precision Grade
・Motor Mounting Posture: Straight
・Driving mode: Ground Ball Screw
・Screw Shaft Dia. (mm): 10
・Lead (mm): 5, 10- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 8 Days -
Single Axis Actuators LX26 Standard / Cover Type
MISUMI
[Specifications]
・Slider Material: Chrome Molybdenum Steel
・Motor Mounting Posture: Straight
・Driving mode: Ground Ball Screw
・Accuracy: High Grade, Precision Grade
・Screw Shaft Dia. (mm): 8
・Lead(mm):2, 5, 10
[Features]
・Precision Certificate is enclosed with precision grade products
・Motor adapter plate and mounting screws are not included with No Adapter Plate Type
・Effective stroke is indicated in dimensions with a margin of 2.5mm each from the ends- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 8 Days -
Single Axis Actuators LX45 Standard / Cover Type
MISUMI
[Specifications]
・Slider Material: Chrome Molybdenum Steel
・Accuracy: High Grade, Precision Grade
・Motor Mounting Posture: Straight
・Driving mode: Ground Ball Screw
・Screw Shaft Dia. (mm): 15
・Lead (mm): 10, 20
Single Axis Actuators LX45 Standard / Cover Type, The shaft diameter of a ball screw(φ)-15.- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 8 Days -
Single Axis Actuators LX15 Standard / Cover Type
MISUMI
[Specifications]
・Slider Material: Chrome Molybdenum Steel
・The shaft diameter of a ball screw(φ): 5
・Lead (mm): 2
・Accuracy: High Grade, Precision Grade
・Motor Mounting Posture: Straight
・Driving mode: Ground Ball Screw
Single Axis Actuators LX15 Standard / Cover Type.- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 8 Days -
Single Axis Actuators LX30 / Motor Folded Type
MISUMI
[Specifications]
・Slider Material: Chrome Molybdenum Steel
・The shaft diameter of a ball screw(φ): 10
・Lead (mm): 5, 10
・Accuracy: High Grade
・Motor Mounting Posture: Fold Back
・Driving mode: Ground Ball Screw
Single Axis Actuators LX30 Motor Folded Type.- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 8 Days -
Actuator SKR33
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 23 Days -
Actuator KR20
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 23 Days -
Actuator KR26
THK
An actuator with a compact and high-stiffness structure that integrates an LM guide, ball screw, and support unit, making it ideal for high-precision positioning.
[Features]
・ In addition to the standard specifications, the manufacturer will semi-order 5 highly requested customs, and will promptly procure and ship after ordering.
[5 custom made]
・ Dowel holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products.
・ Positioning Metal Bolt: Install the positioning metal bolts for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor.
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover.
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance.
・ AFF grease for clean environment: Encloses clean environment-friendly grease (THK, AFF grease) to suppress dust generation.
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab.- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 23 Days -
Actuator SKR26
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 23 Days -
Actuator SKR20
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 23 Days -
Actuator KR45H
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 23 Days -
Single Axis Actuators LX45 / Motor Folded Type
MISUMI
[Specifications]
・Slider Material: Chrome Molybdenum Steel
・The shaft diameter of a ball screw(φ): 15
・Lead (mm): 10, 20
・Accuracy: High Grade
・Motor Mounting Posture: Fold Back
・Driving mode: Ground Ball Screw
Single Axis Actuators LX45 Motor Folded Type.- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 8 Days -
Actuator KR30H
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 23 Days
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Main Body/Peripheral Components |
| Nominal (height) |
| Accuracy |
| Table |
| Lead |
| Motor Mounting Orientation |
| Cover |
| Grease |
| Motor Y/N |
| Lubricant Unit Y/N |
| With or without retainer |
| The shaft diameter of a ball screw(φ) |
| Table length L1 |
| Table width W1 |
| Amplifier Voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | THK | THK | THK | THK | THK | MISUMI | THK |
| Product Series | ||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Min. Shipping Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 23 Days | 23 Days | 23 Days | 23 Days | 23 Days | 23 Days | 8 Days | 23 Days |
| Specifications |
|
|
|
|
| |||||||||
| Main Body/Peripheral Components | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Nominal (height) | 20 | 30 | 26 | 45 | 15 | 30 | 33 | 20 | 26 | 26 | 20 | 45 | 45 | 30 |
| Accuracy | High Grade / Precision Grade | High Grade / Precision Grade | High Grade / Precision Grade | High Grade / Precision Grade | High Grade / Precision Grade | High Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | High Grade | Standard Grade |
| Table | Long 1 pc. / Long 2 pc. | Long 1 pc. / Long 2 pc. / Short 1 pc. / Short 2 pc. | Long 1 pc. / Long 2 pc. | Long 1 pc. / Long 2 pc. / Short 1 pc. / Short 2 pc. | Long 1 pc. | Long 1 pc. / Long 2 pc. / Short 1 pc. / Short 2 pc. | Long 1 pc. / Long 2 pc. / Short 1 pc. / Short 2 pc. | Long 1 pc. / Long 2 pc. | Long 1 pc. / Long 2 pc. | Long 1 pc. / Long 2 pc. | Long 1 pc. / Long 2 pc. | Long 1 pc. / Long 2 pc. / Short 1 pc. / Short 2 pc. | Long 1 pc. / Long 2 pc. / Short 1 pc. / Short 2 pc. | Long 1 pc. / Long 2 pc. / Short 1 pc. / Short 2 pc. |
| Lead | 1 ～ 5 | 5 ～ 10 | 2 ～ 10 | 10 ～ 20 | 2 | 5 ～ 10 | 6 ～ 20 | 1 ～ 6 | 2 ～ 6 | 2 ～ 6 | 1 ～ 6 | 10 ～ 20 | 10 ～ 20 | 6 ～ 10 |
| Motor Mounting Orientation | Straight | Straight | Straight | Straight | Straight | Folding back | Straight / Folding back | Straight / Folding back | Straight / Folding back | Straight / Folding back | Straight / Folding back | Straight / Folding back | Folding back | Straight / Folding back |
| Cover | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Grease | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard | Standard / Low Dust Generation |
| Motor Y/N | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) |
| Lubricant Unit Y/N | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A / Available | N/A |
| With or without retainer | - | - | - | - | - | - | Available | N/A | N/A | Available | Available | N/A | - | N/A |
| The shaft diameter of a ball screw(φ) | 6 | 10 | 8 | 15 | 5 | 10 | 13 | 6 | 8 | 8 | 6 | 15 | 15 | 10 |
| Table length L1 | 33.2 | 28.5 ～ 54 | 47.4 | 43.5 ～ 81 | 23 | 28.5 ～ 54 | 50.5 ～ 76 | 46 | 64 | 64.2 | 46 | 70.5 ～ 108 | 43.5 ～ 81 | 48.9 ～ 74.4 |
| Table width W1 | 29.6 | 44.5 | 37.6 | 59.5 | 22 | 44.5 | 37.4 | 23 | 31 | 31 | 23 | 53 | 59.5 | 38 |
| Amplifier Voltage | - | - | - | - | - | - | N/A | N/A | N/A | N/A | N/A | N/A | - | N/A |
Loading...
Filter by:
-
Main Body/Peripheral Components
- Main Body
- Peripheral Part
-
Nominal (height)
-
Accuracy
-
Table
-
Lead
-
Motor Mounting Orientation
-
Cover
-
Grease
-
Motor Y/N
-
Lubricant Unit Y/N
-
With or without retainer
-
The shaft diameter of a ball screw(φ)
-
Table length L1
-
Table width W1
-
Amplifier Voltage
Brand
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Single Axis Actuators
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.