Registar

Estamos a traduzir a nossa loja para português! 

Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Categoria
Ver mais
Condições de filtragem

Limpar tudo

  • Estoque
  • Attaching Method
  • Tightening Force(N)
  • Body Material
  • Clamp Screw Size
  • Clamp Screw Material
  • Tightening Force (Range Selectable)(N)
  • Tip Bolt Type
  • Tip Bolt Position Adjustment1
  • Fabricante
  • CAD

    • Horizontal Hold-Down Toggle Clamps (Clamp Screw Size: M6)

    Bottom surface-pressing / side handle clamps are a type of clamp used to fasten materials to a work bench. They are designed for use when doing the same work repeatedly, so are used after a mounting base has been fastened to the work bench. The bottom surface-pressing design improves work convenience by fastening the material with a downward force. The available products include types with accessory spindles having fine tips to match fine materials, and types covered in rubber to prevent scratching the fastened material. These clamps usually have a style that incorporates the principle of leverage and a toggle clamp. A toggle clamp with a sideways-facing handle is called a side handle clamp. There are also upright models, but the sideways models enable easier handle operation since the user can put their weight into the operation. The toggle mechanism converts a small force into a large force, pressing the material against the top plate to fasten it in place.
      40 itens
      * Informações sobre dias de expedição, custos de expedição e preços
      Lista
      Foto
      Comparar especificações
    • 1
      • 6830 Horizontal acting toggle clamp
        • Volume Discount

        AMF

        6830 Horizontal acting toggle clamp

        Horizontal acting toggle clamp with open clamping arm and horizontal base. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 to 5, run in hardened bushings. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components. Lock washer for the thrust bolt at the end of the clamping arm. Complete with tempered, galvanized clamping screw no. 6890. The product is available per 1 peace.
        Ler mais
        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Flange Base1200-M6-500 to 2279Bolt with RubberSlide Adjustment
        Preço (excluindo IVA) a partir de:
        33.85 €
        Data de envio regular:
        Item em stock: 1 dia útil
        Envio possível no próprio dia
        Configurar
      • 6833 Horizontal acting toggle clamp
        • Volume Discount

        AMF

        6833 Horizontal acting toggle clamp

        Horizontal acting toggle clamp with open clamping arm and angle base. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components. Lock washer for the thrust bolt at the end of the clamping arm. Complete with tempered, galvanized clamping screw no. 6890. The product is available per 1 peace.
        Ler mais
        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Side Base1200-M6-500 to 2279Bolt with RubberSlide Adjustment
        Preço (excluindo IVA) a partir de:
        36.23 €
        Data de envio regular:
        Item em stock: 1 dia útil
        Envio possível no próprio dia
        Configurar
      • Toggle Clamp, Horizontal Type, Flange Base, Tip Bolt Slide Adjustment, Clamping Force 882 N
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Toggle Clamp, Horizontal Type, Flange Base, Tip Bolt Slide Adjustment, Clamping Force 882 N

        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Flange Base882Steel / Stainless SteelM6Stainless Steel500 to 2279Bolt with Rubber / Stainless Steel BoltSlide Adjustment
        Preço (excluindo IVA) a partir de:
        9.88 €
        Data de envio regular:
        Item em stock: 1 dia útil
        Envio possível no próprio dia
        Configurar
      • 6834 Horizontal acting toggle clamp
        • Volume Discount

        AMF

        6834 Horizontal acting toggle clamp

        Horizontal acting toggle clamp with solid arm and horizontal base. Galvanized and passivated. Stainless steel rivets, which run in hardened bushes. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components. Complete with tempered, galvanized clamping screw no. 6885 and sleeve to weld on. The product is available per 1 peace.
        Ler mais
        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Flange Base1200-M6-500 to 2279Bolt with RubberWeld-On
        Preço (excluindo IVA) a partir de:
        33.85 €
        Data de envio regular:
        7 dias úteis
        Configurar
      • Toggle Clamp, Horizontal Type, U-Shaped Arm, Flange Base, Tip Bolt Slide Adjustment, Tightening Force, 1,500 N
        • Stock

        GOODHANDCLAMP

        Toggle Clamp, Horizontal Type, U-Shaped Arm, Flange Base, Tip Bolt Slide Adjustment, Tightening Force, 1,500 N

        MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.
        Ler mais
        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Flange Base1500SteelM6Steel + Rubber Pad500 to 2279Bolt with RubberSlide Adjustment
        Preço (excluindo IVA) a partir de:
        15.09 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Downward-Pushing Toggle Clamp (Horizontal-Handle Type)
        • DESCONTO
        • Volume Discount

        SUPER TOOL

        Downward-Pushing Toggle Clamp (Horizontal-Handle Type)

        Suited for inspection jigs, welding jigs, and other assembly or machining jigs.
        Ler mais
        CAD:
        3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Flange Base900 ～ 2500Steel / Stainless SteelM6Steel ～ Steel + Rubber Pad500 to 2279 ～ 2280 to 2999Bolt with Rubber / Steel BoltSlide Adjustment
        Preço (excluindo IVA) a partir de:
        13.21 €
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • 6830B Horizontal toggle clamp, black
        • Volume Discount

        AMF

        6830B Horizontal toggle clamp, black

        Horizontal toggle clamp, black With open clamping arm and horizontal base. Matte black surface. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Bearings are pre-lubricated. Ergonomic, oil-resistant black handle with large grip surface and soft components. Lock washer for the thrust bolt at the end of the clamping arm. Complete with tempered, matte-black clamping screw no. 6890B. The product is available per 1 peace.
        Ler mais
        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Flange Base1200-M6-500 to 2279Bolt with RubberSlide Adjustment
        Preço (excluindo IVA) a partir de:
        44.96 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • 68300 Horizontal acting toggle clamp plus with increased clamping force
        • DESCONTO
        • Volume Discount

        AMF

        68300 Horizontal acting toggle clamp plus with increased clamping force

        Waagrechtspanner plus With increased clamping force, open clamping arm and horizontal base.Galvanised and passivated. Stainless steel rivets. The bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with lock washer for the clamping screw at the end of the clamping arm .Complete with tempered, galvanised clamping screw no. 68301. The product is available per 1 peace.
        Ler mais
        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Flange Base3000-M6-3000 or MoreBolt with RubberSlide Adjustment
        Preço (excluindo IVA) a partir de:
        48.98 €
        Preço especial
        Data de envio regular:
        7 dias úteis
        Configurar
      • 6830NI Horizontal acting toggle clamp
        • Volume Discount

        AMF

        6830NI Horizontal acting toggle clamp

        Horizontal acting toggle clamp with open clamping arm and horizontal base. Stainless steel, polished. In sizes 2 to 5, rivets run in bearing bushes. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components. Supplied complete with stainless clamping screw no. 6890NI. Also suitable for use in the food industry. The product is available per 1 peace.
        Ler mais
        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        ---M6----
        Preço (excluindo IVA) a partir de:
        61.88 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Toggle Clamp, Horizontal Type, Straight Base, Tip Bolt Slide Adjustment, Clamping Force 882 N
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Toggle Clamp, Horizontal Type, Straight Base, Tip Bolt Slide Adjustment, Clamping Force 882 N

        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Straight Base882SteelM6Stainless Steel500 to 2279Bolt with RubberSlide Adjustment
        Preço (excluindo IVA) a partir de:
        10.52 €
        Data de envio regular:
        Item em stock: 1 dia útil
        Envio possível no próprio dia
        Configurar
      • 6832 Horizontal acting toggle clamp
        • Volume Discount

        AMF

        6832 Horizontal acting toggle clamp

        Horizontal acting toggle clamp with open clamping arm and vertical base. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 to 5, run in hardened bushings. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components. Lock washer for the thrust bolt at the end of the clamping arm. Complete with tempered, galvanized clamping screw no. 6890. The product is available per 1 peace.
        Ler mais
        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Straight Base1200-M6-500 to 2279Bolt with RubberSlide Adjustment
        Preço (excluindo IVA) a partir de:
        33.85 €
        Data de envio regular:
        4 dias úteis
        Configurar
      • Toggle Clamp Long Handle, Flange Base, Tip Bolt Slide Adjustment, Clamping Force 882 N
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Toggle Clamp Long Handle, Flange Base, Tip Bolt Slide Adjustment, Clamping Force 882 N

        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Flange Base882SteelM6Stainless Steel500 to 2279Bolt with RubberSlide Adjustment
        Preço (excluindo IVA) a partir de:
        13.34 €
        Data de envio regular:
        Item em stock: 1 dia útil
        Envio possível no próprio dia
        Configurar
      • Hold-Down Type Toggle Clamp (Horizontal Handle Type With Release Lever) TDK
        • Volume Discount

        SUPER TOOL

        Hold-Down Type Toggle Clamp (Horizontal Handle Type With Release Lever) TDK

        [Features]· Stainless steel caulking (support) pins are utilized in nearly all models for long term use. [Applications]· Optimal for inspection jigs, welding jigs, other assembly jigs, and machining jigs.
        Ler mais
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Flange Base2800SteelM6Steel2280 to 2999Steel BoltSlide Adjustment
        Preço (excluindo IVA) a partir de:
        27.45 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Lower-Holding Type Clamp NO.38C-S
        • Volume Discount

        KAKUTA

        Lower-Holding Type Clamp NO.38C-S

        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Side Base2500SteelM6-2280 to 2999--
        Preço (excluindo IVA) a partir de:
        26.08 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Lower-Holding Type Clamp NO.82
        • Volume Discount

        KAKUTA

        Lower-Holding Type Clamp NO.82

        CAD:
        2D
        /3D
        Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
        Flange Base1000SteelM6-500 to 2279--
        Preço (excluindo IVA) a partir de:
        38.38 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Toggle Clamp - Horizontal Handle Type THL-40-A, Clamping Force Adjustment Type

          FLECLAM

          Toggle Clamp - Horizontal Handle Type THL-40-A, Clamping Force Adjustment Type

          This downward-pressing flange base type features a low-height design.The balance of the clamping force can be adjusted easily and accurately.
          Ler mais
          CAD:
          2D
          /3D
          Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
          Flange Base1～800SteelM6SteelVariableBolt with RubberSlide Adjustment
          Preço (excluindo IVA) a partir de:
          20.73 €
          Data de envio regular:
          8 dias úteis
          Configurar
        • Toggle Clamp - Horizontal Handle THL-40-B

            FLECLAM

            Toggle Clamp - Horizontal Handle THL-40-B

            Without clamping force adjustment mechanism, conventional type adjustment with rubber - Approximate adjustment in unclamped condition is possible.
            Ler mais
            CAD:
            2D
            /3D
            Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
            Flange Base800SteelM6Steel500 to 2279Bolt with RubberSlide Adjustment
            Preço (excluindo IVA) a partir de:
            10.92 €
            Data de envio regular:
            14 dias úteis
            Configurar
          • 6820A Pneumatic clamp
            • DESCONTO
            • Volume Discount

            AMF

            6820A Pneumatic clamp

            Pneumatic clamp with horizontal cylinder attachment.Fitted with pneumatic cylinder, double-acting. With magnetic piston for end-position monitoring. With throttle bores for reduced speed. Clamps are galvanised and passivated. Stainless steel rivets which, for sizes 2 to 4, run in hardened bearing bushes. Bearings positioned are lubricated.Complete with tempered, galvanised clamping screw no. 6890. The product is available per 1 peace.
            Ler mais
            CAD:
            2D
            /3D
            Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
            Flange Base1200-M6-500 to 2279Bolt with RubberSlide Adjustment
            Preço (excluindo IVA) a partir de:
            295.10 €
            Preço especial
            Data de envio regular:
            6 dias úteis
            Configurar
          • Toggle Clamp, Horizontal Type, Straight Base, Tip Bolt Slide Adjustment, Clamping Force 2,450 N
            • Volume Discount
            • Order quantities extended (D-JIT)

            MISUMI

            Toggle Clamp, Horizontal Type, Straight Base, Tip Bolt Slide Adjustment, Clamping Force 2,450 N

            CAD:
            2D
            /3D
            Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
            Straight Base2450SteelM6Stainless Steel2280 to 2999Steel BoltSlide Adjustment
            Preço (excluindo IVA) a partir de:
            10.84 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • Toggle Clamp, Horizontal Type, Flange Base, Tip Bolt Slide Adjustment, Clamping Force 900 N
            • Volume Discount
            • Order quantities extended (D-JIT)

            MISUMI

            Toggle Clamp, Horizontal Type, Flange Base, Tip Bolt Slide Adjustment, Clamping Force 900 N

            CAD:
            2D
            /3D
            Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
            Flange Base900SteelM6Stainless Steel500 to 2279Bolt with RubberSlide Adjustment
            Preço (excluindo IVA) a partir de:
            10.25 €
            Data de envio regular:
            Item em stock: 1 dia útil
            Envio possível no próprio dia
            Configurar
          • Toggle Clamp, Horizontal Type, Flange Base, Tip Bolt Slide Adjustment, Clamping Force 2,450 N
            • Volume Discount
            • Order quantities extended (D-JIT)

            MISUMI

            Toggle Clamp, Horizontal Type, Flange Base, Tip Bolt Slide Adjustment, Clamping Force 2,450 N

            CAD:
            2D
            /3D
            Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
            Flange Base2450Steel / Stainless SteelM6Stainless Steel2280 to 2999Steel Bolt / Stainless Steel BoltSlide Adjustment
            Preço (excluindo IVA) a partir de:
            11.41 €
            Data de envio regular:
            Item em stock: 1 dia útil
            Alguns artigos podem ser enviados no próprio dia
            Configurar
          • Horizontal Handle / Side Mount Base
            • Volume Discount
            • Order quantities extended (D-JIT)

            MISUMI

            Horizontal Handle / Side Mount Base

            CAD:
            2D
            /3D
            Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
            Side Base2500SteelM6Steel2280 to 2999Steel BoltSlide Adjustment
            Preço (excluindo IVA) a partir de:
            14.11 €
            Data de envio regular:
            Item em stock: 1 dia útil
            Envio possível no próprio dia
            Configurar
          • Toggle Clamp - Horizontal Type - Slit Type Arm (Straight Base) GH-22382

              GOODHANDCLAMP

              Toggle Clamp - Horizontal Type - Slit Type Arm (Straight Base) GH-22382

              CAD:
              3D
              Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
              Straight Base2500SteelM6Steel2280 to 2999Steel BoltSlide Adjustment
              Preço (excluindo IVA) a partir de:
              8.10 €
              Data de envio regular:
              32 dias úteis
              Configurar
            • Toggle Clamp - Horizontal - Slit Arm (Side Flange Base) GH-21383
              • DESCONTO
              • Volume Discount
              • Stock

              GOODHANDCLAMP

              Toggle Clamp - Horizontal - Slit Arm (Side Flange Base) GH-21383

              MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.
              Ler mais
              CAD:
              3D
              Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
              Flange Base2500SteelM6Steel2280 to 2999Steel BoltSlide Adjustment
              Preço (excluindo IVA) a partir de:
              26.71 €
              Preço especial
              Data de envio regular:
              Item em stock: 1 dia útil
              Envio possível no próprio dia
              Configurar
            • Toggle Clamp, Horizontal Type, Tip Slit, Flange Base, Tip Bolt Slide Adjustment, Tightening Force, 2,500 N

                GOODHANDCLAMP

                Toggle Clamp, Horizontal Type, Tip Slit, Flange Base, Tip Bolt Slide Adjustment, Tightening Force, 2,500 N

                A horizontal type toggle clamp. The maximum clamping pressure is 2500N. Iron or stainless steel may be selected for the main body material. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as offering OEM for various manufacturers, they also have manufacturing bases in Europe and North America. Their increased sales have allowed them to offer even greater value to customers.
                Ler mais
                CAD:
                3D
                Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                Flange Base2500Steel / Stainless SteelM6Stainless Steel ～ Steel2280 to 2999Steel Bolt / Stainless Steel BoltSlide Adjustment
                Preço (excluindo IVA) a partir de:
                10.47 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Hold-Down Clamp, Horizontal Handle, No. 38B-S
                • Volume Discount

                KAKUTA

                Hold-Down Clamp, Horizontal Handle, No. 38B-S

                Optimal for inspection, welding, assembly, and machining jigs.
                Ler mais
                CAD:
                2D
                /3D
                Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                Flange Base2500SteelM6Steel2280 to 2999Steel BoltNon-adjustable (Fixed)
                Preço (excluindo IVA) a partir de:
                19.92 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Hold-Down Clamp, No. 38K-S
                • DESCONTO
                • Volume Discount

                KAKUTA

                Hold-Down Clamp, No. 38K-S

                Optimal for inspection, welding, assembly, and machining jigs.
                Ler mais
                CAD:
                2D
                /3D
                Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                Flange Base2800SteelM6Steel2280 to 2999Steel BoltSlide Adjustment
                Preço (excluindo IVA) a partir de:
                22.91 €
                Preço especial
                Data de envio regular:
                Item em stock: 1 dia útil
                Envio possível no próprio dia
                Configurar
              • Hold-Down Clamp, No. 38S-S
                • Volume Discount

                KAKUTA

                Hold-Down Clamp, No. 38S-S

                Optimal for inspection, welding, assembly, and machining jigs.
                Ler mais
                CAD:
                2D
                /3D
                Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                Straight Base2500SteelM6Steel2280 to 2999Steel BoltSlide Adjustment
                Preço (excluindo IVA) a partir de:
                22.05 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Hold-Down Clamp, No. 38P-S
                • Volume Discount

                KAKUTA

                Hold-Down Clamp, No. 38P-S

                Optimal for inspection, welding, assembly, and machining jigs.
                Ler mais
                CAD:
                2D
                /3D
                Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                Side Base2800SteelM6Steel2280 to 2999Steel BoltSlide Adjustment
                Preço (excluindo IVA) a partir de:
                30.49 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Hold-Down Clamp, Horizontal-Type Handle, Self-Locking, No. 38RK-S
                • Volume Discount

                KAKUTA

                Hold-Down Clamp, Horizontal-Type Handle, Self-Locking, No. 38RK-S

                Optimal for inspection, welding, assembly, and machining jigs.
                Ler mais
                CAD:
                2D
                /3D
                Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                Flange Base2500SteelM6Steel2280 to 2999Steel BoltNon-adjustable (Fixed)
                Preço (excluindo IVA) a partir de:
                28.29 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Hold-Down Clamp, Horizontal Handle, No. HH350
                • Volume Discount

                KAKUTA

                Hold-Down Clamp, Horizontal Handle, No. HH350

                Optimal for inspection, welding, assembly, and machining jigs.
                Ler mais
                CAD:
                2D
                /3D
                Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                Flange Base900SteelM6Steel + Rubber Pad500 to 2279Bolt with RubberNon-adjustable (Fixed)
                Preço (excluindo IVA) a partir de:
                15.67 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Lower-Holding Type Clamp NO.HH450-2S
                • Volume Discount
                • Stock

                KAKUTA

                Lower-Holding Type Clamp NO.HH450-2S

                CAD:
                2D
                /3D
                Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                Flange Base2400Stainless SteelM6-2280 to 2999--
                Preço (excluindo IVA) a partir de:
                44.79 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Downward Pressing Type, Toggle Clamp NO.38B-S-2S
                • Volume Discount

                KAKUTA

                Downward Pressing Type, Toggle Clamp NO.38B-S-2S

                CAD:
                2D
                /3D
                Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                Flange Base2500Stainless SteelM6Stainless Steel2280 to 2999Stainless Steel BoltSlide Adjustment
                Preço (excluindo IVA) a partir de:
                46.98 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Toggle Clamp - Horizontal Handle Type THL-45-A, Clamping Force Adjustment Type

                  FLECLAM

                  Toggle Clamp - Horizontal Handle Type THL-45-A, Clamping Force Adjustment Type

                  This downward-pressing flange base type features a low-height design.The balance of the clamping force can be adjusted easily and accurately.
                  Ler mais
                  CAD:
                  2D
                  /3D
                  Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                  Flange Base1～500SteelM6SteelVariableBolt with RubberSlide Adjustment
                  Preço (excluindo IVA) a partir de:
                  20.85 €
                  Data de envio regular:
                  8 dias úteis
                  Configurar
                • 68300NI Horizontal toggle clamp plus
                  • Volume Discount

                  AMF

                  68300NI Horizontal toggle clamp plus

                  Horizontal toggle clamp plus with increased retaining forces, open clamp arm and horizontal base. Stainless steel, polished. Bearings positioned are lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with retainer for the clamping screw at the end of the clamping arm. Supplied complete with stainless clamping screw no. 68301NI. Also suitable for use in the food industry. The product is available per 1 peace.
                  Ler mais
                  CAD:
                  2D
                  /3D
                  Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                  ---M6----
                  Preço (excluindo IVA) a partir de:
                  85.67 €
                  Data de envio regular:
                  5 dias úteis
                  Configurar
                • 6832B Horizontal toggle clamp, black
                  • DESCONTO
                  • Volume Discount

                  AMF

                  6832B Horizontal toggle clamp, black

                  Horizontal toggle clamp, black With open clamping arm and vertical base. Matte black surface. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Bearings are pre-lubricated. Ergonomic, oil-resistant black handle with large grip surface and soft components. Lock washer for the thrust bolt at the end of the clamping arm. Complete with tempered, matte-black clamping screw no. 6890B. The product is available per 1 peace.
                  Ler mais
                  CAD:
                  2D
                  /3D
                  Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                  Straight Base1200-M6-500 to 2279Bolt with RubberSlide Adjustment
                  Preço (excluindo IVA) a partir de:
                  44.96 €
                  Preço especial
                  Data de envio regular:
                  Item em stock: 1 dia útil
                  Envio possível no próprio dia
                  Configurar
                • 6837M Horizontal acting toggle clamp with removable handle
                  • Volume Discount

                  AMF

                  6837M Horizontal acting toggle clamp with removable handle

                  [Specifications]・Type: 939, 942・Clamping screw: M6x35, M8x45・Size: 2, 3, 4[Features]・For removable handle・To prevent interference during use, the handle can be removed after opening or closing this horizontal acting toggle clamp・With open clamping arm and horizontal base. Galvanized and passivated. Stainless steel rivets. The bearings are pre-lubricated・Complete with tempered, galvanised clamping screw no. 6890
                  Ler mais
                  CAD:
                  2D
                  /3D
                  Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                  Flange Base1200-M6-500 to 2279Bolt with RubberSlide Adjustment
                  Preço (excluindo IVA) a partir de:
                  25.08 €
                  Data de envio regular:
                  5 dias úteis
                  Configurar
                • 6871 Horizontal toggle clamp variable
                  • Volume Discount

                  AMF

                  6871 Horizontal toggle clamp variable

                  Horizontal toggle clamp variable with open clamping arm and angle base.Toggle clamp with continuous counterbalance function for workpieces with different clamping heights.Galvanised and passivated. Ergonomic, oil-resistant handle with large grip surface and soft components. Retainer for the clamping screw at the end of the clamp arm.Complete with galvanised clamping screw. The product is available per 1 peace.
                  Ler mais
                  CAD:
                  2D
                  /3D
                  Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                  Side Base2000-M6-500 to 2279Bolt with RubberSlide Adjustment
                  Preço (excluindo IVA) a partir de:
                  33.33 €
                  Data de envio regular:
                  5 dias úteis
                  Configurar
                • 6872 Horizontal toggle clamp variable
                  • Volume Discount

                  AMF

                  6872 Horizontal toggle clamp variable

                  Horizontal toggle clamp variable with open clamping arm and vertical base.Toggle clamp with continuous counterbalance function for workpieces with different clamping heights.Galvanised and passivated. Ergonomic, oil-resistant handle with large grip surface and soft components. Retainer for the clamping screw at the end of the clamp arm. Complete with galvanised clamping screw. The product is available per 1 peace.
                  Ler mais
                  CAD:
                  2D
                  /3D
                  Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                  ---M6----
                  Preço (excluindo IVA) a partir de:
                  33.33 €
                  Data de envio regular:
                  5 dias úteis
                  Configurar
                • 6830ESD ESD Horizontal Toggle Clamp
                  • Volume Discount

                  AMF

                  6830ESD ESD Horizontal Toggle Clamp

                  ESD horizontal toggle clamp· With protective cap and handle made of electrostatic conductive (dissipative) material.· With open clamping arm and horizontal base.· Galvanised and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Bearing positions are greased.· Ergonomic, oil-resistant handle with large grip surface and soft components. Retainer for the clamping screw at the end of the clamp arm.· Complete with tempered, galvanised clamping screw No. 6890ESD.
                  Ler mais
                  CAD:
                  2D
                  /3D
                  Attaching MethodTightening Force(N)Body MaterialClamp Screw SizeClamp Screw MaterialTightening Force (Range Selectable)(N)Tip Bolt TypeTip Bolt Position Adjustment1
                  ---M6----
                  Preço (excluindo IVA) a partir de:
                  41.15 €
                  Data de envio regular:
                  5 dias úteis
                  Configurar
              • 1

                • Exemplos de unidades MISUMI relacionadas com esta categoria

                Procurar outros exemplos

                Categorias relacionadas com Horizontal Hold-Down Toggle Clamps