Guide Elements（Page 3）

256

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Gripper Studs, low

HALDER

For clamping unmachined parts. Least possible lost clamping margin. Clamping height: adjustable from 3.0 to 4.5 mm.

Select to compare

Configure now
Starting from^∗ ：	56.13 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Gripper Studs, round

HALDER

For clamping unmachined parts. For drilling through close to the edge. Offers 6 mm clear space under the workpiece.

Select to compare

Configure now
Starting from^∗ ：	54.74 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Gripper Studs, smooth

HALDER

With carbide coating for clamping pre-machined or hardened workpieces.

Select to compare

Configure now
Starting from^∗ ：	63.23 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Insertable Plates

HALDER

Three support heights. For levelling the workpiece on the five-sided machining jaws. Ground to high accuracy. Supplied without M 6 x 8 mm mounting screws (Art. No. 1704.600). This product is supplied as a pair.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	176.88 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Intermediate Elements

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・System: V70

Intermediate Elements.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	378.14 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Intermediate Plates / Steel, case-hardened, ground / V70

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・h(mm): 20, 30
・System: V70

T-Slot Systems Mounting Elements, Intermediate Plates EH 1111.700-EH 1111.800

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	352.00 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Intermediate Plates / Steel, case-hardened, ground / V40, V70

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・d1(mm): 40, 56
・System: V40, V70

T-Slot Systems Mounting Elements, Intermediate Plates EH 1047.700-EH 1147.700

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	140.94 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Jaws for Five-Sided Machining Sets

HALDER

Pull-down elements suitable for clamping and pulling unmachined clamping surfaces down onto the guideway or onto the 90-mm support plates supplied. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the support plates largely reduces vibrations in the workpiece.
Supplied in handycase consisting of:
4 x wedge adapters for five-sided machining jaw (Art. No. 1704.410)
4 x wedge elements, four-point (Art. No. 1703.340)
4 x wedge elements, Microgripper (Art. No. 1703.350)
2 x insertable plates (h1=90 mm) (Art. No. 1704.520)
20 x cheese-head screws M 6 x 8 (Art. No. 1704.600)

Select to compare

Configure now
Starting from^∗ ：	1,436.66 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Jaws for Five-Sided Machining / Jaw

HALDER

Particularly suitable for five-side machining. Better accessibility for tools. Ground clamping surfaces. Additional thread for parallels. Accuracy through pull-down. Stability through form-locking.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	742.97 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Jaws, ribbed | 1701.250

HALDER

Standard jaws with small surface area. In order to increase specific surface pressure. Please order mounting screws separately (Art. No. 1701.300). Supplied as a pair.

Select to compare

Configure now
Starting from^∗ ：	265.39 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Lateral Stops / Steel / M6

HALDER

[Specifications]
・Material: Steel
・d1: M6

The stop can be mounted on both sides of the clamping bar.

Select to compare

Configure now
Starting from^∗ ：	43.11 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Locating Segments

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・b1(mm): 10, 14
・b2(mm): 20, 34

The stop can be mounted on both sides of the clamping bar.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	278.32 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Mounting Blocks

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・b1(mm): 25, 40, 70
・b2(mm): 10, 14
・System: V40, V70

This mounting element is a system part of the T-slot system.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	305.12 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Mounting Blocks, V70eco

HALDER

V70eco mounting blocks are a further development of the established V70 product line, optimized in quality and price. They are fully compatible with the existing V70 T-slot System.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	254.95 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Mounting Elements

HALDER

[Specifications]
・Material: Grey cast iron, ground
・d1(mm): 12, 16
・d2(mm): M12, M16
・System: L12, L16

Mounting Elements EH 1512.000-EH 1612.400

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	291.03 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Mounting Screws, for jaws

HALDER

[Specifications]
・Material: Steel, tempered
・d(mm): M10
・l(mm): 23

Mounting Screws, for jaws EH 1701.

Select to compare

Configure now
Starting from^∗ ：	8.43 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Mounting Screws, for jaws for five-sided machining

HALDER

For mounting the wedge adapters on the five-sided machining jaws as well as for mounting the insertable plates on the five-sided machining jaws.

Select to compare

Configure now
Starting from^∗ ：	2.82 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Step Jaws, for gripper studs

HALDER

Top face and side face, with thread for mounting of parallel jaws. Ground clamping surfaces. Additional threads for mounting the interchangeable jaws (Art. No. 1701.250-1701.280) on the high side. Suitable for mounting of gripper studs. First and second clamping operations, without adjustment. Mountings for click system (Art. No. 1701.190-1701.200) on the high side of the jaw
Attention:
These are rigid jaws which are only suitable for rectangular workpieces (saw cuts) - parallelism less or equal 0.5 mm (// <=0.5) and cylindrical workpieces - roundness less than or equal 0.5 (O <=0.5).

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	440.89 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

T-Wrenches

HALDER

[Specifications]
・Material: Steel, case-hardened
・l1(mm): 210, 250
・l2(mm): 105, 125
・System: V40, V70

Wrenches EH 1032.100-EH 1132.100

Select to compare

Configure now
Starting from^∗ ：	49.72 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Step Jaws

HALDER

Top face and side face, with thread for mounting of parallel jaws. Ground clamping surfaces. Additional threads for parallels and for mounting the interchangeable jaws (Art. No. 1701.250-1701.280) on the smooth side. Mountings for click system (Art. No. 1701.190-1701.200) on both sides of the jaw.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	360.93 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Pivot Jaws, movable / Jaw, movable

HALDER

One side smooth and ground, the other side ribbed. 360° swivel. Use together with hardened base jaws (Art. No. 1701.120). Suitable for mounting of swap-on parallels (Art. No. 1701.190 - 1701.200).

Select to compare

Configure now
Starting from^∗ ：	692.32 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Positioning Clamping Bar

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・b1(mm): 50, 60
・b2(mm): 30, 40
・System: L12, L16, V70

Positioning Clamping Bar

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	267.52 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Positioning Clamping Bars, two-sided

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・b1(mm): 10, 14
・b2(mm): 20, 30
・System: V40, V70

Positioning Clamping Bars, two-sided EH 1049.200-EH 1149.200

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	321.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Prismatic Jaws

HALDER

For horizontal and vertical clamping of round and flat workpieces. Please order mounting screws separately (Art. No. 1701.300). This product is supplied as a two piece.

Select to compare

Configure now
Starting from^∗ ：	605.31 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Pull-Down Sets, high

HALDER

Pull-down elements are suitable for clamping and pulling down clamping surfaces that are unmachined or pre-machined onto the guideway or onto the supplied clamping bolts. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the clamping bolts largely reduces vibrations in the workpiece
Supplied in handycase consisting of:
4 x wedge adapters, high (Art. No. 1703.310). 4 x bolts, high M 10 x 45 mm (Art. No. 1703.330). 4 x wedge elements, 4 point (Art. No. 1703.340). 4 x wedge elements, Microgripper (Art. No. 1703.350). 4 x clamping bolts 48 mm (Art. No. 1703.440). 4 x clamping bolts 34 mm (Art. No. 1703.420).

Select to compare

Configure now
Starting from^∗ ：	1,652.88 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Pull-Down Sets, low

HALDER

Pull-down elements are suitable for clamping and pulling down clamping surfaces that are unmachined or pre-machined onto the guideway or onto the supplied clamping bolts. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the clamping bolts largely reduces vibrations in the workpiece
Supplied in handycase consisting of:
4 x wedge adapter, low (Art. No. 1703.300). 4 x bolts, low M 10 x 30 mm (Art. No. 1703.320). 4 x wedge element, 4 point (Art. No. 1703.340). 4 x wedge element Microgripper (Art. No. 1703.350). 4 x clamping bolts 23 mm (Art. No. 1703.400). 4 x clamping bolts 34 mm (Art. No. 1703.420).

Select to compare

Configure now
Starting from^∗ ：	1,516.62 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Screw Plugs

HALDER

[Specifications]
・Material: Plastic
・d(mm): M12, M16
・l1(mm): 25, 30
・System: L12, L16

Screw Plugs EH 1557.000-EH 1657.000

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.98 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Snap-on Parallels, click

HALDER

For accurate height setting of workpiece
Height ground. Snap-on, with screw mounting
For the high sides of the jaws
Supplied as pair.

Select to compare

Configure now
Starting from^∗ ：	182.54 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Spacers, for the L-12 hole and dowel system

HALDER

For the L-12 hole and dowel system the disks 1107.400 - 1108.300 are used.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.60 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Step Jaws, for horizontal clamping of flat workpieces

HALDER

For horizontal clamping of flat workpieces. Please order mounting screws separately (Art. No. 1701.300).
This product is supplied as a pair.

Select to compare

Configure now
Starting from^∗ ：	327.23 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Stop Angles

HALDER

[Specifications]
・Material: Grey cast iron, phosphatized, ground
・b(mm): 37, 66
・d1(mm): 12, 16
・System: L12, L16

Stop Angles EH 1520.400-EH 1621.700

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	429.32 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stops / Steel, case-hardened, ground / V70

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・h1(mm): 37, 57
・System: V70

T-Slot Systems Mounting Elements, Stops EH 1116.000-EH 1116.100

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	83.03 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stops, diamond coated

HALDER

[Specifications]
・Body: Tool steel, hardened
・Pin: Diamond coating
・l1(mm): 42, 44
・l2(mm): 20

Stops, diamond coated EH 1586.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	206.67 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stops, Gripper Studs

HALDER

Gripper insert consists of two pins from HSS, when clamped they penetrate into the workpiece surface and may leave residual marks.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	210.83 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stops, horizontal prisms

HALDER

[Specifications]
・Body: Tool steel, hardened
・b1(mm): 44
・h1(mm): 21.4
・l2(mm): 20

Stops, horizontal prisms EH 1586.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	172.10 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stops, ribbed

HALDER

[Specifications]
・Body: Tool steel, hardened
・Pin: Hard metal
・b1(mm): 44
・b2(mm): 24

Stops, ribbed EH 1586.060

Select to compare

Configure now
Starting from^∗ ：	264.13 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stops, soft

HALDER

The chucks can be machined to the needed workpiece contour.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	147.09 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stops, vertical prisms

HALDER

[Specifications]
・Body: Tool steel, hardened
・b1(mm): 44
・h1(mm): 21.4

Stops, vertical prisms EH 1586.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	169.34 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stops, with mounting thread

HALDER

[Specifications]
・Body: Tool steel, hardened
・Pin: Hard metal
・b1(mm): 44
・h1(mm): 21.4

Stops, with mounting thread EH 1586.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	151.61 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Support Clamping Bars

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・b1(mm): 25, 40
・b2(mm): 8.5, 13
・System: L12, V40, V70

Support Clamping Bars

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	111.51 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Wrenches

HALDER

[Specifications]
・Material: Heat-treated steel, heat treated
・l(mm): 295, 300
・System: V70

Wrenches EH 1139.400-EH 1139.500

Select to compare

Configure now
Starting from^∗ ：	23.83 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Support Jaws, for mounting various pull-down wedge element

HALDER

For mounting various pull-down wedge elements (Art. No. 1703.300-1703.400), universal gripper (Art. No. 1702.600) sets and gripper studs (Art. No. 1702.710-1702.780). Front surface can be used as clamping surface (hardened and ground)
Support jaw, mobile,oscillating (Art. No. 1702.200) For clamping uneven workpieces. To compensate for non-parallel clamping surfaces
Supplied without wedge elements, gripper set and gripper studs.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	661.38 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Support Jaws, for mounting various gripper studs

HALDER

For mounting various gripper studs (Art. No. 1702.710-1702.780) or a universal gripper set (Art. No. 1702.600). For three-point clamping. Front surface can be used as clamping surface (hardened and ground)
Supplied without gripper studs or gripper sets.

Select to compare

Configure now
Starting from^∗ ：	584.20 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Supporting Bars

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・b1(mm): 40, 60
・System: L12, L16

Supporting Bars EH 1550.000-EH 1650.000

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	201.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Supporting Plates

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・b1(mm): 22~40
・System: L12, L16, V40, V70

Supporting Plates

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	53.30 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER
Product Series	Gripper Studs, low	Gripper Studs, round	Gripper Studs, smooth	Insertable Plates	Intermediate Elements	Intermediate Plates / Steel, case-hardened, ground / V70	Intermediate Plates / Steel, case-hardened, ground / V40, V70	Jaws for Five-Sided Machining Sets	Jaws for Five-Sided Machining / Jaw	Jaws, ribbed \| 1701.250	Lateral Stops / Steel / M6	Locating Segments	Mounting Blocks	Mounting Blocks, V70eco	Mounting Elements	Mounting Screws, for jaws	Mounting Screws, for jaws for five-sided machining	Step Jaws, for gripper studs	T-Wrenches	Step Jaws	Pivot Jaws, movable / Jaw, movable	Positioning Clamping Bar	Positioning Clamping Bars, two-sided	Prismatic Jaws	Pull-Down Sets, high	Pull-Down Sets, low	Screw Plugs	Snap-on Parallels, click	Spacers, for the L-12 hole and dowel system	Step Jaws, for horizontal clamping of flat workpieces	Stop Angles	Stops / Steel, case-hardened, ground / V70	Stops, diamond coated	Stops, Gripper Studs	Stops, horizontal prisms	Stops, ribbed	Stops, soft	Stops, vertical prisms	Stops, with mounting thread	Support Clamping Bars	Wrenches	Support Jaws, for mounting various pull-down wedge element	Support Jaws, for mounting various gripper studs	Supporting Bars	Supporting Plates
CAD				3D	3D	3D	3D		3D			3D	3D	3D	3D			3D		3D		3D	3D				3D		3D		3D	3D	3D	3D	3D		3D	3D	3D	3D		3D		3D	3D
Starting from^∗	56.13 € *Unit price with basic configuration	54.74 € *Unit price with basic configuration	63.23 € *Unit price with basic configuration	176.88 € *Unit price with basic configuration	378.14 € *Unit price with basic configuration	352.00 € *Unit price with basic configuration	140.94 € *Unit price with basic configuration	1,436.66 € *Unit price with basic configuration	742.97 € *Unit price with basic configuration	265.39 € *Unit price with basic configuration	43.11 € Special price *Unit price with basic configuration Promotional pricing	278.32 € *Unit price with basic configuration	305.12 € *Unit price with basic configuration	254.95 € *Unit price with basic configuration	291.03 € *Unit price with basic configuration	8.43 € *Unit price with basic configuration	2.82 € *Unit price with basic configuration	440.89 € *Unit price with basic configuration	49.72 € *Unit price with basic configuration	360.93 € *Unit price with basic configuration	692.32 € *Unit price with basic configuration	267.52 € *Unit price with basic configuration	321.97 € *Unit price with basic configuration	605.31 € *Unit price with basic configuration	1,652.88 € *Unit price with basic configuration	1,516.62 € *Unit price with basic configuration	0.98 € *Unit price with basic configuration	182.54 € *Unit price with basic configuration	16.60 € *Unit price with basic configuration	327.23 € *Unit price with basic configuration	429.32 € *Unit price with basic configuration	83.03 € *Unit price with basic configuration	206.67 € *Unit price with basic configuration	210.83 € *Unit price with basic configuration	172.10 € *Unit price with basic configuration	264.13 € *Unit price with basic configuration	147.09 € *Unit price with basic configuration	169.34 € *Unit price with basic configuration	151.61 € *Unit price with basic configuration	111.51 € *Unit price with basic configuration	23.83 € *Unit price with basic configuration	661.38 € *Unit price with basic configuration	584.20 € *Unit price with basic configuration	201.02 € *Unit price with basic configuration	53.30 € *Unit price with basic configuration
Min. Shipping Days	3 Days	3 Days	3 Days	3 Days	4 Days	4 Days	4 Days	3 Days	3 Days	3 Days	Same day	4 Days	4 Days	4 Days	4 Days	3 Days	3 Days	3 Days	4 Days	3 Days	3 Days	4 Days	4 Days	3 Days	3 Days	3 Days	4 Days	3 Days	4 Days	3 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	3 Days	3 Days	4 Days	4 Days