Bearing Lock Nuts / Shaft Nuts / Locknuts（Page 2）

?* Information on days to ship and prices

• 

  Hydraulic Nut, HYDNUT Series, Metric Fine Pitch Thread / Trapezoid Thread

  FAG

  HYDNUT..-E

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3,942.28 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Slotted Round Nuts DIN 1804, Type w

  MAEDLER

  Material: type w = steel, black oxide finish, unhardened, unground.
  At these nuts, the stepped face with Ø d₃ shall always be used as the bearing face.
  From size M45x1.5, the nuts have 6 slots.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.05 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Lockwashers DIN 5406 for Locknuts DIN 981, Stainless Steel

  MAEDLER

  Material: Stainless steel 1.4301 (AISI 304).
  Strength min. 350 N/mm².
  Safety plates for locknuts DIN 981.
  A keyway is required on the shaft thread.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.88 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locknuts KMT with Locking Pins

  MAEDLER

  Material: KMT: Steel.
  Strength min. 350 N/mm².
  Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up to 0.005 mm. Slotnut-design. Up to size 15 with two additional wrench flats.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Roller Bearing Retaining Nut AN Series

  YOKOTA KIKOU

  [Features] This is an AN series round roller bearing nut made of steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Roller Bearing Retaining Washer AW Series

  YOKOTA KIKOU

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.27 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Fine U Nut

  SUNCO

  The friction ring is crimped and integrated with the nut, same as on the U Nut.
  
  [Features]
  · Lock nut for bearing.
  · The spring action of the friction ring creates friction on the male screw to cause a locking effect.
  · Can be fixed in an intermediate position.
  · Since it is all metal, it has excellent heat resistance.
  · No key groove processing on the shaft side.
  
  [Shape] Round
  [Material] SS400 equivalent / S45C equivalent / SUS304 equivalent
  [Screw type] Metric coarse
  [Nominal designation] M10 × 0.75 to M150 × 2.0
  [Type]Lock nut

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Locknuts HM30, main dimensions to DIN 981

  FAG

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	249.78 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Locknuts KML, main dimensions to DIN 981

  FAG

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	71.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Lock Nuts - Series HML..T

  BGL

  Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	143.40 €
  Min. Shipping Days ：	21 Days

  *Unit price with basic configuration

• 

  Slot nut / KM

  BGL

  Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.90 €
  Min. Shipping Days ：	21 Days

  *Unit price with basic configuration

• 

  SKF Precision Shaft Nuts with Retaining Pins KMTA

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	62.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Shaft Nut, with Clamping Bolt

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	25.43 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Locknut, MU.KMT..-MFO Series

  FAG

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	43.37 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locknuts DIN 70852, Steel

  MAEDLER

  Material: Steel, hardness class 17 H
  These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread).
  Recommend tolerance for the shaft thread: 6g DIN ISO 965.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.38 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Lock Nut

  EVER-ON CORPORATION

  [Features]
  · Prevents screws loosening due to vibration.
  · Functions the same as a bearing nut, so a tab washer is not required.
  
  [Applications]
  · For fastening bearings, etc.
  

  Select to compare

  Configure now
  Starting from∗ ：	4.39 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Bearing Washer

  SUNCO

  [Shape] Round
  [Material] Steel
  [Surface treatment] None
  [Screw type] Metric coarse
  [Type] Tooth lock washer

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.46 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Slotted locknuts with thread locking

  GANTER

  GN 1804.2 slotted locknuts with thread locking can be secured against twisting by twisting off the threaded shaft via a d4 set screw. The thread flanks of the nut ensure damage-free securing and can be used as often as needed.
  The d3 offset plane surface is intended as an axial contact surface.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Lock Nuts - Series HM..T

  BGL

  Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	143.40 €
  Min. Shipping Days ：	21 Days

  *Unit price with basic configuration

• 

  Slot nut / steel / precision class selectable / KM-T

  NKE BEARINGS

  Select to compare

  Configure now
  Starting from∗ ：	2.30 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Grooved Nut, Imperial

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	11.07 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Slotted locknuts / Steel / DIN 70852

  GANTER

  [Specifications]
  ・Material: ST. Steel
  
  [Features]
  ・Slotted locknuts DIN 70852 serve fir adjusting the amount of play or for securing shaft-hub connections in an axial direction, for example
  ・The flat design of the slotted locknuts allows for especially space-saving installation

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.20 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Slotted Round Nuts DIN 1804, Type h

  MAEDLER

  Material: type h = steel, hardened with the exeption of the thread, faces ground.
  At these nuts, the stepped face with Ø d₃ shall always be used as the bearing face.
  From size M45x1.5, the nuts have 6 slots.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locknuts KMMR, Single-Splitted, with Clamp Screw

  MAEDLER

  Material KMMR: Stainless steel 1.4301 (AISI 304).
  Screw stainless steel A2-70.
  Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d₁.
  Recommend tolerance for the shaft thread: 6g DIN ISO 965.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locknuts KMK-R with Integral Locking Device

  MAEDLER

  Material: KMK-R: Stainless steel 1.4301 (AISI 304).
  Strength min. 350 N/mm².
  Reusable shaft nut with integrated locking device.
  Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locknuts DIN 70852, Stainless Steel

  MAEDLER

  Material: Stainless steel 1.4301 (AISI 304).
  These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread).
  Recommend tolerance for the shaft thread: 6g DIN ISO 965.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Roller Bearing Retaining Nut HN Series

  YOKOTA KIKOU

  [Features]
  · A shaft nut used for the rotating element of a machine which is designed to prevent loosening.

  Select to compare

  Configure now
  Starting from∗ ：	231.37 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Roller Bearing Retaining Washer and Clasp, AL Clasp Series

  YOKOTA KIKOU

  [Features]
  · Washer for shafts that are used for the rotating elements of machines to prevent loosening.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	23.02 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  HLB

  SUNCO

  Uses both the top nut (convex type) and bottom nut (concave type).
  The top nut is perfectly circular with respect to the bolt, but the bottom nut has been eccentrically machined off-center with respect to the bolt.
  
  [Features] Since the lower nut is eccentric, tightening the upper nut will apply a lateral force due to the wedging action. Friction to this male thread prevents loosening.
  · Can be manually tightened to your desired position.
  · Can be used repeatedly.
  · HLB is for bearings.
  
  [Shape] Round
  [Material] SS400/S45C
  [Nominal of Thread] M15X1.0/M10X0.75/M12X1.0/M17X1.0/M20X1.0/M25X1.5/M30X1.5/M35X1.5/M40X1.5/M45X1.5/M50X1.5/M55X2.0/M60X2.0/M65X2.0/M70X2.0/M75X2.0/M80X2.0/M85X2.0/M90X2.0/M95X2.0/M100X2.0/M105X2.0/M110X2.0/M115X2.0/M120X2.0/M125X2.0/M130X2.0/M135X2.0/M140X2.0/M145X2.0/M150X2.0/M155X3.0/M160X3.0/M165X3.0/M170X3.0/M175X3.0/M180X3.0/M185X3.0/M190X3.0/M195X3.0/M200X3.0
  [Type] Lock Nut

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	77.48 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  6333S AMF-TWINNUT nut - without collar

  AMF

  AMF-TWINNUT nut - without collar with hard detent.
  Bright, strength class 10. The product is available per 1 peace.

  Select to compare

  Configure now
  Starting from∗ ：	40.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Slotted locknuts, Stainless Steel

  GANTER

  On Stainless Steel-Slotted locknuts DIN 1804 the ground surface d3 stands proud and should be used as a mating surface.
  The sizes M45x1,5 to M60x1,5 have 6 slots.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hydraulic Nuts - Series HMVC

  BGL

  Hydraulic Nuts are used to mount and dismount of rolling bearings with tapered bore. They can also be used for the dismounting of adapter or withdrawal sleeves.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,490.95 €
  Min. Shipping Days ：	21 Days

  *Unit price with basic configuration

• 

  Slot nut / HM

  BGL

  Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	208.95 €
  Min. Shipping Days ：	21 Days

  *Unit price with basic configuration

• 

  Lock Nuts - Series HMLL

  BGL

  Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	80.32 €
  Min. Shipping Days ：	21 Days

  *Unit price with basic configuration

• 

  Lock Nuts - Series KML

  BGL

  Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Lock Washers - Series MB..A

  BGL

  These are an accessory for sleeves but they also have their own application. Their main purpose is to lock the KM and KML nuts preventing them from being released from the sleeve or the shaft itself.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.12 €
  Min. Shipping Days ：	21 Days

  *Unit price with basic configuration

• 

  Lock Washers - Series MBL

  BGL

  These are an accessory for sleeves but they also have their own application. Their main purpose is to lock the KM and KML nuts preventing them from being released from the sleeve or the shaft itself.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.98 €
  Min. Shipping Days ：	21 Days

  *Unit price with basic configuration

• 

  Clamping Nuts, self-locking

  HALDER

  Clamping nuts are used for rotating parts, especially for reversible shafts, for example for fixing the grinding wheel. The compact construction ensures a safe function and allows quick installation using a face pin wrench.

  Select to compare

  Configure now
  Starting from∗ ：	56.73 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Slot nut / stainless steel / SKM

  ZEN

  Select to compare

  Configure now
  Starting from∗ ：	4.90 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bearing Lock Nuts

  ZEN

  Select to compare

  Configure now
  Starting from∗ ：	8.73 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Distance Washer

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	1.82 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Fixed Ring

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	5.26 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Hydraulic Nut, HYDNUT Series, HEAVY Type

  FAG

  HYDNUT..-HEAVY

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8,525.77 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shaft Nut HMZ

  FAG

  Shaft nut HMZ

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	411.51 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Locknut, ZMA Series

  INA

  Precision locknuts ZMA, locking pegs, radially arranged, heavy series

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	74.89 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...