Bearing Components

243

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

Recommendation

Speedi-sleeves / Internal diameter 12~201.63mm

SKF

[Specifications]
・Internal diameter(mm): 12~201.63
・Outer diameter(mm): 12.06~189.86
・eClass code: 23-05-92-90

SKF Speedi-Sleeve provides an alternative to costly repairs for worn or damaged shafts. This thin-walled sleeve, specially developed by SKF, is simply positioned over the relevant part of the shaft and provides a smooth counterface that is optimized for radial shaft seals. Use of SKF Speedi-Sleeve can prevent the need for costly shaft treatments that may involve machining, hardening, plunge grinding or disassembly. SKF Speedi-Sleeve Gold is an enhanced version of standard SKF Speedi-Sleeve, offering improved resistance to abrasive wear.

[Features]
・Optimized countersurface
・Cost effective
・Well-proven solution

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Recommendation

Locating rings / Internal diameter 47~460mm

SKF

[Specifications]
・Internal diameter(mm): 47~460
・Outer diameter(mm): 52~1420
・Width(mm): 2~22
・eClass code: 23-05-17-90

A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.

Select to compare

Configure now
Starting from^∗ ：	3.85 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Retaining Ring WR

NTN

A dedicated stop ring used when the track ring or retainer of a needle roller bearing is fixed in the axial direction, or guided.

[Features]
· Although the shape is the same as a C-shaped concentric retaining ring as specified in JIS B 2804, this product has been manufactured to a smaller cross-sectional height (b) to accommodate a needle shaped bearing and to an even smaller size range.
· Using a hard steel wire, a chemical treatment is applied to the surface.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.29 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Tab washers MB, main dimensions to DIN 5406

FAG

[Specifications]
・Internal Diameter(φ): 10-280
・Outer Diameter(φ): 21-362

Tab washers MB are simple, reliable elements for securing smaller locknuts.

[Features]
・Tab washers have an inner tab and several outer tabs evenly spaced around the circumference
・The inner tab grips in the slot on the adapter sleeve or shaft, one of the outer tabs is bent into a slot in the nut for location
・The washers are made from steel and the tensile strength of the material is at least 300 N/mm2
・DIN 5406

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.55 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Plummer block housings, split

FAG

[Specifications]
・Outer Diameter(φ): 52-550
・Width(mm): 70-235

Plummer block housings, SNV series, split type, for bearings with tapered bore and adapter sleeves, matic shaft.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.32 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Needle rollers NRB, to DIN 5402-3/ ISO 3096, type B, end faces flat, profiled ends

INA

[Specifications]
・Outer Diameter(φ): 1-5

INA Needle rollers NRB, type B, end faces flat, profiled ends, DIN 5402-3/ ISO 3096

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.07 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Retaining Ring BR

NTN

A dedicated stop ring used when the track ring or retainer of a needle roller bearing is fixed in the axial direction, or guided.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.30 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Seal G

NTN

Seal specially designed for use with needle roller bearings with a small cross-section height.

[Features]
· Seal specially designed for use with needle roller bearings with a small cross-section height.
· Contact seal made of synthetic rubber reinforced by steel plate, with an operating temperature range of -25° to 120°C, and 100°C or less for continuous use.
· A G model with a single lip and a GD model with two lips are available.
· Hardening and finishing by grinding of the contact surface of the seal is necessary in order to obtain good sealing performance.
· In addition, there should not be any harmful damage or indentations on the contact surface of the seal.
· The inner ring raceway surface should preferably be used as a seal contact surface.
· A suitable press-fit between the seal and the housing can be obtained within a normal housing tolerance of G7 tp R7.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.88 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SKF Locating Rings

SKF

[Specifications]
・Inner dimension(mm): 47-380
・Outer dimension(mm): 52-400
・Width(mm): 2-18
・Material: Steel

A bearing in the locating position must be secured axially in the housing, if the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required.

Select to compare

Configure now
Starting from^∗ ：	3.43 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Inner rings IR, precision machined, to DIN 620

INA

[Specifications]
・Inner dimension(mm): 5-380
・Outer dimension(mm): 8-415
・Width(mm): 10.5-100
・DIN 620

Inner rings IR are made from hardened rolling bearing steel and have precision machined raceways.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	4.23 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Four-bolt Flanged Housing GG.ME.., Round, Cast Iron, for Radial Insert Ball Bearings

INA

[Specifications]
・Internal Diameter(φ): 46.987-109.985

[Features]
・For radial insert ball bearings, flanged housings made from cast iron are offered and can also be provided in a corrosion-resistant design
・Cast iron housings are always one-piece units and can support hish load

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Needle rollers NRA

INA

[Specifications]
・Internal Diameter(φ): 1-5
・Outer Diameter(φ): 5.8-39.8

INA Needle rollers NRA type.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.07 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Plummer Block Housing GG.SHE.., Cast Iron, for Radial Insert Ball Bearings

INA

Plummer Block Housing GG.SHE.., Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.55 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Plummer Block Housing GG.ASE.., Cast Iron, for Radial Insert Ball Bearings

INA

[Features]
・For radial insert ball bearings, plummer block housings made from cast iron are offered and can also be provided in a corrosion-resistant design
・Cast iron housings are always one-piece units and can support hish load

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.20 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

SKF Cylinder Rollers

SKF

[Specifications]
・Material: 1.3505 (100Cr6)
・Surface hardness: 58 - 65 HRC
・Norm: DIN 5402-1
・Rolling element diameter Dw(mm): 4-40

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Felt seal

FAG

[Specifications]
・Outer dimension(mm): 11-206.2
・Width(mm): 9-151.2

[Features]
・Felt seals FSV are particularly suitable for grease lubrication
・They comprise an adapter holding the inserted, oil-impregnated felt strip and the adapter is secured against rotation by an O ring in the annular slot in the housing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.23 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Felt Rings, Felt Strips

FAG

[Specifications]
・Inner dimension(mm): 5-16
・Width(mm): 4-12

FAG bearing accessories, felt rings/felt strips, inner diameters 5~16mm.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Four-bolt Flanged Housing GG.CJ.., Square, Cast Iron, for Radial Insert Ball Bearings

INA

Four-bolt Flanged Housing GG.CJ.., Square, Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.97 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Needle Roller, NRB Series, Type B, Flat Ends, Profiled Ends

INA

[Specifications]
・Dw: 1~6
・Lw: 4.3~45.8

Needle Roller, NRB Series, Type B, Flat Ends, Profiled Ends.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.05 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Two-bolt Flanged Housing GG.CFT.., Cast Iron, for Radial Insert Ball Bearings

INA

Two-bolt Flanged Housing GG.CFT.., Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Inner Ring

NTN

Optimal for use with shafts that cannot be surface hardened or finished,
although shafts are often used directly as raceway surfaces without a needle roller bearing inner ring.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.77 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Axial needle roller bearings AXW, single direction, AXK with axial bearing washer

INA

[Specifications]
・Internal Diameter(φ): 10~50
・Outer Diameter(φ): 27~73

Axial needle roller bearings, single direction, AXK with axial bearing washer.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.55 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Plummer block housings, main housing, split, for spherical roller bearings with cylindrical bore, metric and inch size shaft diameters

FAG

[Specifications]
・Outer Diameter(mm): 280~500
・Width(mm): 230~350

Plummer block housing, split, for spherical roller bearings, metric and inch size shaft diameters, for grease lubrication.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,600.72 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Axial needle roller and cage assemblies AXK, single direction, to DIN 5405-2

INA

[Specifications]
・Inner dimension(mm): 4-160
・Outer dimension(mm): 14-200
・Width(mm): 2-5

[Features]
・Axial needle roller and cage assemblies AXK comprise geometrically stable plastic or metal cages fitted with a large number of needle rollers
・Due to the high uniformity of diameter (the needle rollers are sorted to very small diameter tolerances) of the needle rollers with each other, this gives very uniform loading od the rolling elements
・DIN 5405-2

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.05 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Two-bolt Flanged Housing GG.CJT.., Cast Iron, for Radial Insert Ball Bearings

INA

[Specifications]
・Internal diameter d(mm): 39.987~109.985

Two-bolt Flanged Housing GG.CJT.., Cast Iron, for Radial Insert Ball Bearings

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Two-bolt Flanged Housing GG.CJTZ.., Cast Iron, for Radial Insert Ball Bearings

INA

[Specifications]
・Internal diameter d(mm): 46.989~109.985

Two-bolt Flanged Housing GG.CJTZ.., Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Felt strips / eClass code 23-05-17-90

SKF

[Specifications]
・eClass code: 23-05-17-90

Felt strips, and their high-temperature variants made of aluminium borosilicate, provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt strip and the shaft, transforming the seal into a non-contact, gap-type seal. Felt strips should be cut to the correct length and soaked in hot oil prior to being installed.

[Features]
・Cost-effective
・Suitable for relatively high shaft speeds

Select to compare

Configure now
Starting from^∗ ：	0.37 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taking-up Housing Units GG.TUE.., Cast Iron, for Radial Insert Ball Bearings

INA

Taking-up Housing Units GG.TUE.., Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.13 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Thrust washer P10 Series / Maintenance-free. for dry-running applications / Internal diameter 12~62mm

PERMAGLIDE

[Specifications]
・Material: Lead-free, Leaded
・Internal diameter(mm): 12~62
・Outer diameter(mm): 24~90
・Width(mm): 1.5, 2

[Features]
・Absorbing and transferring axial forces coming from one direction
・Fixing moving components to each other
・Ensuring axial guidance accuracy over the entire service life

Select to compare

Configure now
Starting from^∗ ：	1.32 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flanged Housing F112.. for Self-Aligning Ball Bearing 112.., with Wide Inner-Ring, Felt Seal, Grease Lubrication

FAG

[Specifications]
・Inner Diameter(mm): 20~55
・Outer Diameter(mm): 47~90
・Width(mm): 42~65.5

Flanged housing for self-aligning ball bearing 112 with wide inner-ring, felt seal, grease lubrication.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	79.80 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Intermediate Washer ZS Series, for Needle Roller Thrust Bearings

INA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.26 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Materials for Bearings, NIP Series

INA

Materials for Bearings, NIP Series

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.49 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Plummer block housings, additional housing, split, for spherical roller bearings with cylindrical bore, metric shaft diameters

FAG

[Specifications]
・Outer Diameter(mm): 280~500
・Width(mm): 230~350

Plummer block housing, split, for spherical roller bearings with cylindrical bore, metric shaft diameters, for grease lubrication.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,677.63 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Speedi-sleeves / Internal diameter 25.4mm

SKF

[Specifications]
・Internal diameter(mm): 25.4
・Width(mm): 7.95
・eClass code: 23-05-92-90

SKF Speedi-Sleeve provides an alternative to costly repairs for worn or damaged shafts. This thin-walled sleeve, specially developed by SKF, is simply positioned over the relevant part of the shaft and provides a smooth counterface that is optimized for radial shaft seals. Use of SKF Speedi-Sleeve can prevent the need for costly shaft treatments that may involve machining, hardening, plunge grinding or disassembly. SKF Speedi-Sleeve Gold is an enhanced version of standard SKF Speedi-Sleeve, offering improved resistance to abrasive wear.

[Features]
・Optimized countersurface
・Cost effective
・Well-proven solution

Select to compare

Configure now
Starting from^∗ ：	19.55 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bearing Components P10 Series

PERMAGLIDE

[Specifications]
・Material: Leaded
・Internal diameter(mm): 18, 22, 48
・Outer diameter(mm): 32, 38, 74
・Width(mm): 1.5, 2

[Features]
・Absorbing and transferring axial forces coming from one direction
・Fixing moving components to each other
・Ensuring axial guidance accuracy over the entire service life
・P10 Series

Select to compare

Configure now
Starting from^∗ ：	1.67 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

INA Inner Rings

INA

[Specifications]
・Internal diameter d(mm): 5~200
・External diameter D(mm): 8~220

Inner rings IR are made from hardened rolling bearing steel and have precision machined raceways.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	4.29 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Single-Row Needle Roller Cage Assemblies

INA

[Specifications]
・Internal diameter d(mm): 3~195
・External diameter D(mm): 6~205

Radial needle roller and cage assemblies can support high radial loads and allow high speeds. They combine the load carrying capacity advantages of full complement needle roller bearing arrangements with the speed advantages of a cage bearing and are easy to mount.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.29 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Lock Washer

FAG

[Specifications]
・Outer Diameter(mm): 30~160
・Width(mm): 1.12~3.1

Lock Washer.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Two-bolt Flanged Housing GG.GLCTE.., Cast Iron, for Radial Insert Ball Bearings

INA

[Specifications]
・Internal diameter d(mm): 39.989~79.987

Two-bolt Flanged Housing GG.GLCTE.., Cast Iron, for Radial Insert Ball Bearings

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

General Purpose Inner Ring

IKO

[Features]General-purpose inner ring with 2 types of inner ring shape: a loose taper relief and a small chamfer.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.87 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Locating ring

FAG

[Specifications]
・Type: FE, FRM
・Inner Diameter(mm): 46~180
・Outer Diameter(mm): 51~190
・Width(mm): 2~18

Stabilisation rings for fix bearing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.00 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Felt strips / Aluminium borosilicate / 8.5mm

SKF

[Specifications]
・Material: Aluminium borosilicate
・Width: 8.5mm

Felt strips, and their high-temperature variants made of aluminium borosilicate, provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt strip and the shaft, transforming the seal into a non-contact, gap-type seal. Felt strips should be cut to the correct length and soaked in hot oil prior to being installed

[Features]
・Cost-effective
・Suitable for relatively high shaft speeds

Select to compare

Configure now
Min. Shipping Days ：	Quote

Lock washers / Steel / Internal diameter 10~280mm

SKF

[Specifications]
・Internal diameter(mm): 10~280
・Outer diameter(mm): 21~362
・Width(mm): 1~3
・eClass code: 23-11-07-05

MB and MBL lock washers are locking devices, used to secure KM, KML and HM .. T lock nuts onto a shaft or adapter sleeve and prevent unintentional loosening. MB .. A is a stronger version of the MB washer. The lock washers engage a keyway in the shaft or adapter sleeve thread. They lock the nut in position when one of the washer tabs is bent into one of the slots in the outside diameter of the lock nut. A new lock washer should be used each time the corresponding lock nut is installed.

[Features]
・Simple, stable and reliable fastening element
・Easy to install and remove
・Used for KM, KML, and HM .. T lock nuts

Select to compare

Configure now
Starting from^∗ ：	0.87 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Bearing Components / Internal diameter 15.926~400mm

SKF

[Specifications]
・Internal diameter(mm): 15.926~400
・Outer diameter(mm): 42~360

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Needle thrust washer

NADELLA

[Specifications]
・Inner dimension(mm): 5-40.1
・Outer dimension(mm): 12.4-59.5
・Width(mm): 0.8-3

CP Thrust Plate, Thin/Thick Series.

Select to compare

Configure now
Starting from^∗ ：	1.70 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days

	Select to compare Recommendation	Select to compare Recommendation	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	SKF	SKF	NTN	FAG	FAG	INA	NTN	NTN	SKF	INA	INA	INA	INA	INA	SKF	FAG	FAG	INA	INA	INA	NTN	INA	FAG	INA	INA	INA	SKF	INA	PERMAGLIDE	FAG	INA	INA	FAG	SKF	PERMAGLIDE	INA	INA	FAG	INA	IKO	FAG	SKF	SKF	SKF	NADELLA
Product Series	Speedi-sleeves / Internal diameter 12~201.63mm	Locating rings / Internal diameter 47~460mm	Retaining Ring WR	Tab washers MB, main dimensions to DIN 5406	Plummer block housings, split	Needle rollers NRB, to DIN 5402-3/ ISO 3096, type B, end faces flat, profiled ends	Retaining Ring BR	Seal G	SKF Locating Rings	Inner rings IR, precision machined, to DIN 620	Four-bolt Flanged Housing GG.ME.., Round, Cast Iron, for Radial Insert Ball Bearings	Needle rollers NRA	Plummer Block Housing GG.SHE.., Cast Iron, for Radial Insert Ball Bearings	Plummer Block Housing GG.ASE.., Cast Iron, for Radial Insert Ball Bearings	SKF Cylinder Rollers	Felt seal	Felt Rings, Felt Strips	Four-bolt Flanged Housing GG.CJ.., Square, Cast Iron, for Radial Insert Ball Bearings	Needle Roller, NRB Series, Type B, Flat Ends, Profiled Ends	Two-bolt Flanged Housing GG.CFT.., Cast Iron, for Radial Insert Ball Bearings	Inner Ring	Axial needle roller bearings AXW, single direction, AXK with axial bearing washer	Plummer block housings, main housing, split, for spherical roller bearings with cylindrical bore, metric and inch size shaft diameters	Axial needle roller and cage assemblies AXK, single direction, to DIN 5405-2	Two-bolt Flanged Housing GG.CJT.., Cast Iron, for Radial Insert Ball Bearings	Two-bolt Flanged Housing GG.CJTZ.., Cast Iron, for Radial Insert Ball Bearings	Felt strips / eClass code 23-05-17-90	Taking-up Housing Units GG.TUE.., Cast Iron, for Radial Insert Ball Bearings	Thrust washer P10 Series / Maintenance-free. for dry-running applications / Internal diameter 12~62mm	Flanged Housing F112.. for Self-Aligning Ball Bearing 112.., with Wide Inner-Ring, Felt Seal, Grease Lubrication	Intermediate Washer ZS Series, for Needle Roller Thrust Bearings	Materials for Bearings, NIP Series	Plummer block housings, additional housing, split, for spherical roller bearings with cylindrical bore, metric shaft diameters	Speedi-sleeves / Internal diameter 25.4mm	Bearing Components P10 Series	INA Inner Rings	INA Single-Row Needle Roller Cage Assemblies	Lock Washer	Two-bolt Flanged Housing GG.GLCTE.., Cast Iron, for Radial Insert Ball Bearings	General Purpose Inner Ring	Locating ring	Felt strips / Aluminium borosilicate / 8.5mm	Lock washers / Steel / Internal diameter 10~280mm	Bearing Components / Internal diameter 15.926~400mm	Needle thrust washer
CAD				3D						3D												3D		3D						3D						3D	3D			2D / 3D
Starting from^∗	-	3.85 € *Unit price with basic configuration	0.29 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.55 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	38.32 € *Unit price with basic configuration Volume Discount	0.07 € *Unit price with basic configuration Volume Discount	0.30 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.88 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	3.43 € *Unit price with basic configuration	4.23 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	17.02 € *Unit price with basic configuration Volume Discount	0.07 € *Unit price with basic configuration Volume Discount	15.55 € *Unit price with basic configuration Volume Discount	11.20 € *Unit price with basic configuration Volume Discount	-	8.23 € *Unit price with basic configuration Volume Discount	- Volume Discount	7.97 € *Unit price with basic configuration Volume Discount	0.05 € *Unit price with basic configuration Volume Discount	7.97 € *Unit price with basic configuration Volume Discount	3.77 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	3.55 € *Unit price with basic configuration Volume Discount	1,600.72 € *Unit price with basic configuration Volume Discount	2.05 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.97 € *Unit price with basic configuration Volume Discount	14.97 € *Unit price with basic configuration Volume Discount	0.37 € *Unit price with basic configuration	12.13 € *Unit price with basic configuration Volume Discount	1.32 € *Unit price with basic configuration	79.80 € *Unit price with basic configuration Volume Discount	16.26 € *Unit price with basic configuration Volume Discount	1.49 € *Unit price with basic configuration Volume Discount	1,677.63 € *Unit price with basic configuration Volume Discount	19.55 € *Unit price with basic configuration	1.67 € *Unit price with basic configuration	4.29 € *Unit price with basic configuration	2.29 € *Unit price with basic configuration	- Volume Discount	8.02 € *Unit price with basic configuration Volume Discount	5.87 € *Unit price with basic configuration Volume Discount	3.00 € *Unit price with basic configuration Volume Discount	-	0.87 € *Unit price with basic configuration	-	1.70 € *Unit price with basic configuration
Min. Shipping Days	4 Days	4 Days	Same day	Same day	3 Days	3 Days	Same day	Same day	5 Days	Same day	4 Days	12 Days	4 Days	4 Days	5 Days	3 Days	4 Days	3 Days	4 Days	4 Days	Same day	3 Days	3 Days	Same day	4 Days	4 Days	4 Days	3 Days	4 Days	3 Days	4 Days	4 Days	4 Days	4 Days	4 Days	5 Days	5 Days	4 Days	4 Days	5 Days	3 Days	Quote	12 Days	4 Days	4 Days