Keyless Bushing (Fastening Fittings)（Page 2）

?* Information on days to ship and prices

• 

  Tapered Clamping Bush 3020 with Inch Drill

  CONCAR

  [Specifications]
  ・Type: 3020
  ・Body Material: Cast Iron
  ・Standard: British Standard BS 46 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	34.54 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Shrink Disc 4161

  RINGFEDER

  Two-piece shrink disk for high torque stress. Easy assembly by mounting stop. Good centering and concentricity properties.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-C, Stainless

  MAEDLER

  Material: Stainless steel 1.4401 (AISI 316).
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Self-centering.
  • No axial offset.
  Concentricity: 0.02 to 0.04 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	72.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes E-N

  MAEDLER

  Material: Stainless steel 1.405 (AISI 431).
  The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression.
  Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled.
  Concentricity: 0.02 mm.
  Tolerances: Shaft h7 for d = 15 mm.
  Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.
  Shaft h8 for the other diameters d.
  Hub H7.
  Temperature range: -30 oC to 85 oC.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	427.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-A Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing A.P.LOCK SAPL-CK Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
  · Suitable for short hubs.
  · Internal ring mounts to the terminal face, preventing the hub from moving when connected.
  · Choose from stainless steel or electroless nickel plated products to suit the use environment.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.43 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1108 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 1108
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	3.38 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7061

  RINGFEDER

  Self-centering clamping set with rough surface pressure, the compact design is ideal for toothed disks.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.37 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7110

  RINGFEDER

  Clamping set for hubs with low wall thickness. Ideal for aluminum hubs.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 8006 SST

  RINGFEDER

  Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Shaft Hubs, lock nut, stainless steel mm / mm

  HALDER

  Select to compare

  Configure now
  Starting from∗ ：	58.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-B

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
  • For medium torques.
  • Also suitable for small hub diameters.
  • Self-centering.
  • Self-locking.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-C

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium to high torques.
  • Self-centering.
  • No axial offset.
  Concentricity: 0.02 to 0.04 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.05 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1008

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.14 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 3525

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	39.64 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies TT 17-35 mm

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For high torques.
  • Self-centering.
  • Axial offset during mounting (can be compensated by correct positioning).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	40.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies TOK Version A

  MAEDLER

  Material Version A: Steel, bright.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Self-centering.
  • Axial offset during mounting (can be compensated by correct positioning).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.78 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shrink discs stainless steel Form A (23380-01)

  NORELEM

  · To connect a hollow shaft to a shaft
  
  · Suitable for static, dynamic and shock loads
  
  · For very high torques
  
  · No shift of axial shaft/hub during assembly
  
  · Self-centring

  Select to compare

  Configure now
  Starting from∗ ：	99.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Mecha-Lock MKN, Rust-Proof Nut Tightening Type, Electroless Nickel Plating Specifications

  ISEL

  Nut tightening shortens tightening time. Electroless nickel plated product.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	90.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Mecha-Lock MT, General Purpose Type

  ISEL

  No drag when connecting for easy removal

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  POSI LOCK G

  MIKI PULLEY

  Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Can support heavy loads.
  
  [Features]
  · Tightening the clamping bolt moves the 2 taper rings in the shaft direction.
  · At this time, the wedging action between both the inner ring and the outer ring against the taper surface produces force that pushes against the shaft and hub internal surface. This force completely connects the axis and shaft.
  · The PSL-G has an even transmission ability due to its simple construction and strong components, and it can also cope with heavy loads.
  · Short in shaft direction, does not take up more space than necessary.
  · PSL-G-C (simple rust-proofing specification) is a simple rust proofing specification that involves applying electroless nickel plating to the main body.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing, Centering Type SES

  Save & Secure

  Centering type of keyless bushing. Abundant variations to choose from, with allowable torque from 6.2 to 13000N·m. The SS company manufactures a 20% share of the couplings in Taiwan. The company's are centered on China and Southeast Asia, and is trying to expand both its domestic and foreign shares.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing, Straight Type

  CAP

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.80 €
  Min. Shipping Days ：	58 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-AS Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	67.20 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-CS Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
  · Suitable for short hubs.
  · Internal ring mounts to the terminal face, preventing the hub from moving when connected.
  · Choose from stainless steel or electroless nickel plated products to suit the use environment.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	74.76 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing A.P.LOCK SAPL-B Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · SAPL-A Depending on the type, the cover outer diameter and bolt size are both large, providing comparatively high durability relative to the corresponding internal diameter.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPA Series

  SUNGIL

  [Features]
  · Made from aluminum.
  Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
  · High torque transmission power
  Uses high rigidity aluminum alloy to transmit torque, so it can be used not only with aluminum pulleys but also general steel pulleys.
  · Optimal for clean rooms
  Electroless nickel plating bolts are used standard for the aluminum main body materials, making it optimal for clean rooms.

  Select to compare

  Configure now
  Starting from∗ ：	20.88 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing A.P.LOCK SAPC Series

  SUNGIL

  [Features]
  · Made from aluminum.
  Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
  · Optimal for aluminum pulleys.
  When running a servo motor with a timing pulley, conventional friction connection units apply high pressure to the surfaces, which prevents the hub diameter from sitting properly and causes problems with slippage. The SAPC series uses servo motor torque specifications as the basis for reducing the bolt count and lowering pressure on surfaces, making it possible to connect to aluminum pulleys without difficulty.
  · Staged machining structure.
  Designed so that the push plate of the bearing could carry out its role, eliminating the need for the use of a separate bearing push plate.
  · Easy assembly and position setting.
  For conventional power locks, a space of 1 mm from there counterpart items is required to facilitate disassembly, but the SAPC series has a structure that is easy to disassemble even if there is no room for the hub to move during disassembly. Also, position setting is easy.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1215 with Metric Drill

  CONCAR

  [Specifications]
  ・Standard: DIN 6885 Part 1
  
  Tapered Clamping Bush 1215 with Metric Drill

  Select to compare

  Configure now
  Starting from∗ ：	5.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 2012 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 2012
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	10.54 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Keyless Bushing (Fastening Fittings)

  OPTIBELT

  [Specifications]
  ・Shaft Bore Dia. d(Ø): 10-120
  ・Overall Length W(mm): 22.3-127
  ・Outer Dia. A(φ): 35-178

  Select to compare

  Configure now
  Min. Shipping Days ：	4 Days

• 

  Locking Assemblies Stainless Steel 7013.1 SST

  RINGFEDER

  Stainless steel clamping set with excellent concentricity and very good disassembly - with these self-centering clamping sets a particularly good concentricity between the clamped parts is achieved. The flange is reinforced at the critical point, this prevents bending and lifting of the inner ring during assembly. This ensures good demountability. Ideal for high speeds, radial loads and for axial hub fixation. High-strength clamping screws allow a higher performance range.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	70.85 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies Stainless Steel 7061 SST

  RINGFEDER

  Self-centering 2-piece Locking Assemblies for medium torques. During mounting, minor axial displacement of the hub occurs in opposite direction of the screw head. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. High-strength clamping screws allow a higher performance range.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.37 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Elements Slotted 8006 SST

  RINGFEDER

  Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Shrink Disc 4061

  RINGFEDER

  Shrink disc for high torques. Compensation of smaller tolerances possible with simple assembly and disassembly.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tapered Shaft Hubs, without lock nut, stainless steel mm / mm

  HALDER

  Select to compare

  Configure now
  Starting from∗ ：	53.55 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• 

  Spare Screws for Taper Bushes

  MAEDLER

  Material: Steel.
  Supply: One screw. Order quantity as needed.
  Taper bushes have two or (from size 3525) three screws, depending on bush size. Thread BSW (Whitworth), with metric hexagon.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.72 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies BAR, QPQ-Coated

  MAEDLER

  Material: Steel.
  • For fixing a hub on a shaft.
  • QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
  • For medium torques.
  • Self-centering.
  • Slight axial offset possible during assembly.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	28.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies BAR, Stainless

  MAEDLER

  Material: Stainless steel 1.4401 (AISI 316).
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • Stainless Steel.
  • For low torques.
  • Very good distribution of pressure.
  • Very good self-centering.
  • Self-releasing at dismounting.
  • Also suitable for large hub and shaft tolerances.
  • Slight axial offset possible during assembly.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	96.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-A

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
  • For medium high torques.
  • Not self-centering.
  • Self-releasing at dismounting.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.09 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-CB2

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. spur toothed gear or similar) on a shaft.
  • For medium high torques.
  • Self-centering.
  • Self-locking.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-L

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For very high torques.
  • Self-centering.
  • Slight axial offset possible during assembly.
  Concentricity: 0.02 to 0.04 mm.
  
  * When using in a stepped bore, the clearance C is to be foreseen for demounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-L, QPQ-Coated

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
  • For very high torques.
  • Self-centering.
  • Slight axial offset possible during assembly.
  Concentricity: 0.02 to 0.04 mm.
  
  * When using in a stepped bore, the clearance C is to be foreseen for demounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	34.86 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-R

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For lower to medium torques.
  • Not self-centering.
  • Loose clamping rings. For use with customer's pressure sleeves and customer´s screws.
  • Up to 4 clamping sets can be used in line.
  • Versatile usage, for customized solutions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1108

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...