Keyless Bushing (Fastening Fittings) (página 2)

• 

  CONCAR

  Tapered Clamping Bush 2517 with Inch Drill

  [Specifications]・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Tapered Clamping Bush 2517 with Inch Drill

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  18.00 €～

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  CONCAR

  Tapered Clamping Bush 4545 with Metric Drill

  [Specifications]・Type: 4545・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  78.15 €

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  RINGFEDER

  Locking Assemblies 8006 SST

  Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free.

  Ler mais

  CAD:

  3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  6.60 €～

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Locking Assemblies TT 17-35 mm

  Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For high torques.• Self-centering.• Axial offset during mounting (can be compensated by correct positioning).

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	Provided	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  40.96 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  KBK

  Rigid Shaft Coupling KBS95

  · Very cost-effective · For medium and low torques · No axial displacement during assembly · Self-centering · Torque range: 158 - 4300Nm

  Ler mais

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  10.99 €～

  Data de envio regular:

  12 dias úteis

  Configurar
• 

  CONCAR

  Tapered Clamping Bush 1108 with Inch Drill

  [Specifications]・Type: 1108・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  10.91 €

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  CONCAR

  Tapered Clamping Bush 1615 with Metric Drill

  [Specifications]・Type: 1615・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  9.08 €

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  CONCAR

  Tapered Clamping Bush 3020 with Inch Drill

  [Specifications]・Type: 3020・Body Material: Cast Iron・Standard: British Standard BS 46 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  34.54 €～

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  CONCAR

  Tapered Clamping Bush 3020 with Metric Drill

  [Specifications]・Type: 3020・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  18.54 €

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  RINGFEDER

  Locking Assemblies 7003

  Universal clamping set for small installation space. Self-centering and easy to install for medium to high torques.

  Ler mais

  CAD:

  3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  11.38 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  RINGFEDER

  Locking Assemblies 7012

  Clamping set with a narrow design. Particularly suitable for tight installation conditions and coarser tolerance fluctuations with high power reserves.

  Ler mais

  CAD:

  3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  61.87 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  RINGFEDER

  Locking Assemblies 7085

  Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity. The clamping set is additionally nickel-plated.

  Ler mais

  CAD:

  3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  48.50 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  RINGFEDER

  Locking Assemblies Stainless Steel 7061 SST

  Self-centering 2-piece Locking Assemblies for medium torques. During mounting, minor axial displacement of the hub occurs in opposite direction of the screw head. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. High-strength clamping screws allow a higher performance range.

  Ler mais

  CAD:

  3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  6.37 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  HALDER

  Tapered Shaft Hubs, lock nut, stainless steel mm / mm

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  58.36 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Taper Bushes 1610

  Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  8.19 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Taper Bushes 1615

  Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  9.73 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Taper Bushes 2517

  Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  17.42 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  KBK

  Locking Element KBS50

  · Very cost-effective · For medium and low torques · Requests a mounting flange provided by the customer · Compact installation dimensions · Non self-centering · Torque range: 2,4 - 31500Nm

  Ler mais

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  2.83 €～

  Data de envio regular:

  12 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  MIKI PULLEY

  POSI LOCK D

  Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Medium load and lightweight type.[Features]· Tighten the clamping bolt to move the outer ring in the shaft direction.· At this time, the wedge action on the tapered face with the inner ring creates a force that pushes the shaft and the hub inner face, which forces the shaft and the hub to be fully engaged.· The PSL-D is designed for medium loading, with a small surface pressure and reduced installation diameter and weight.· Short in shaft direction, does not take up more space than necessary.· PSL-D-C is a simple rust proofing specification that involves applying electroless nickel plating to the main body.

  Ler mais

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Straight	-	Steel	2 ～ 50	2.0 to 20.0 ～ 1000.1 to 3000.0	Not Provided / Electroless Nickel Plating	16 ～ 80	Single Cone Type	Mechanical Type (Wedge Type)

  Preço regular (excluindo IVA):

  73.77 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  KATAYAMA CHAIN

  KanaLock (Cost-Effective Product) Model KPL200

  KPL200 is a dedicated KanaLock for shafts and bosses that require substantial transmission torque. Easy mounting. Applicable shaft diameter 19 mm to 70 mm.

  Ler mais

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Straight	Not Provided	Steel	19 ～ 70	200.1 to 300.0 ～ 3000.1 to 10000.0	Not Provided	47 ～ 110	Double Cone Type	Mechanical Type (Wedge Type)

  Preço regular (excluindo IVA):

  19.79 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  CAP

  Keyless Bushing, Standard Type (with Centering Function)

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.

  Ler mais

  CAD:

  2D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Provided	Steel	15 ～ 70	-	Not Provided	-	Single Cone Type	Mechanical Type (Wedge Type)

  Preço regular (excluindo IVA):

  12.70 €～

  Data de envio regular:

  10 dias úteis

  Configurar
• 

  SUNGIL

  Keyless Bushing A.P.LOCK SAPL-AK Series

  [Features]· Self-centering function: Prevents minute Off-centering.· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.· Internal diameters 4.5ø to 40ø standardized.· Has simple structure for easy assembly.· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  Ler mais

  CAD:

  2D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Provided	Steel	5 ～ 50	2.0 to 20.0 ～ 1000.1 to 3000.0	Electroless Nickel Plating	16 ～ 72	Single Cone Type	Mechanical Type (Wedge Type)

  Preço regular (excluindo IVA):

  25.27 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNGIL

  Keyless Bushing A.P.LOCK SAPL-CK Series

  [Features]· Self-centering function: Prevents minute Off-centering.· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)· Suitable for short hubs.· Internal ring mounts to the terminal face, preventing the hub from moving when connected.· Choose from stainless steel or electroless nickel plated products to suit the use environment.

  Ler mais

  CAD:

  2D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Thin Wall	Provided	Steel	5 ～ 30	2.0 to 20.0 ～ 500.1 to 700.0	Electroless Nickel Plating	12 ～ 41	Single Cone Type	Mechanical Type (Wedge Type)

  Preço regular (excluindo IVA):

  35.89 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNGIL

  Keyless Bushing A.P.LOCK SAPL-B Series

  [Features]· Self-centering function: Prevents minute Off-centering.· SAPL-A Depending on the type, the cover outer diameter and bolt size are both large, providing comparatively high durability relative to the corresponding internal diameter.

  Ler mais

  CAD:

  2D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Provided	Steel	8 ～ 30	2.0 to 20.0 ～ 500.1 to 700.0	Not Provided	22 ～ 55	Single Cone Type	Mechanical Type (Wedge Type)

  Preço regular (excluindo IVA):

  27.61 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO

  KBK

  Short locking device for higher tolerances KBS40

  · Costs-effective · Very short · Large span · Non self-centering · Torque range: 255 - 68000Nm

  Ler mais

  CAD:

  3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Straight	-	Steel	19 ～ 220	-	-	47 ～ 285	Double Cone Type	Mechanical Type (Wedge Type)

  Preço regular (excluindo IVA):

  11.77 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  CONCAR

  Tapered Clamping Bush 2012 with Metric Drill

  [Specifications]・Type: 2012・Body Material: Cast Iron・Standard: DIN 6885 Part 1Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	Grey Iron	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  10.54 €

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  OPTIBELT

  Keyless Bushing (Fastening Fittings)

  [Specifications]・Shaft Bore Dia. d(Ø): 10-120・Overall Length W(mm): 22.3-127・Outer Dia. A(φ): 35-178

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	10 ～ 120	-	-	-	-	-

  Preço regular (excluindo IVA):

  3.75 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  RINGFEDER

  Locking Assemblies 7070

  Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.

  Ler mais

  CAD:

  3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  45.20 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  RINGFEDER

  Locking Assemblies Stainless Steel 7013.1 SST

  Stainless steel clamping set with excellent concentricity and very good disassembly - with these self-centering clamping sets a particularly good concentricity between the clamped parts is achieved. The flange is reinforced at the critical point, this prevents bending and lifting of the inner ring during assembly. This ensures good demountability. Ideal for high speeds, radial loads and for axial hub fixation. High-strength clamping screws allow a higher performance range.

  Ler mais

  CAD:

  3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  70.85 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  RINGFEDER

  Locking Assemblies Stainless Steel 7090

  Stainless clamping set with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has an excellent concentricity and concentricity.

  Ler mais

  CAD:

  3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  36.00 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  RINGFEDER

  Shrink Disc 4061

  Shrink disc for high torques. Compensation of smaller tolerances possible with simple assembly and disassembly.

  Ler mais

  CAD:

  3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  41.82 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  RINGFEDER

  Shrink Disc 4161

  Two-piece shrink disk for high torque stress. Easy assembly by mounting stop. Good centering and concentricity properties.

  Ler mais

  CAD:

  3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  41.82 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Locking Assemblies BAR, Stainless

  Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• Stainless Steel.• For low torques.• Very good distribution of pressure.• Very good self-centering.• Self-releasing at dismounting.• Also suitable for large hub and shaft tolerances.• Slight axial offset possible during assembly.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	Provided	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  96.16 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Locking Assemblies COM-B

  Material: Steel.• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.• For medium torques.• Also suitable for small hub diameters.• Self-centering.• Self-locking.• No axial movement during mounting.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	Provided	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  19.08 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Locking Assemblies COM-C, Stainless

  Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• No axial offset.Concentricity: 0.02 to 0.04 mm.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	Provided	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  72.66 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Locking Assemblies COM-R

  Material: Steel.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For lower to medium torques.• Not self-centering.• Loose clamping rings. For use with customer's pressure sleeves and customer´s screws.• Up to 4 clamping sets can be used in line.• Versatile usage, for customized solutions.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	Not Provided	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  5.93 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Taper Bushes 1008

  Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  5.14 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Taper Bushes 1108

  Material: GG25.Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.Other bush sizes and bores available at short notice.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  5.47 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Locking Assemblies TOK Version A

  Material Version A: Steel, bright.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• Axial offset during mounting (can be compensated by correct positioning).

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	Provided	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  12.78 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Locking Assemblies TMK Version A

  Material Version A: Steel, bright.• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• With a second hexagon to hold against while tightening the nut.• Axial offset during mounting (can be compensated by correct positioning).

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	Provided	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  15.88 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Locking Assemblies (Rigid Couplings) ST-K

  Material: Steel.• For connecting two shafts, as a rigid coupling.• For medium torques.• Easy mounting.• Self-releasing at dismounting.• No axial movement during mounting.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	Not Provided	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  20.28 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MAEDLER

  Clamping Bushes E-N

  Material: Stainless steel 1.405 (AISI 431).The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression.Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled.Concentricity: 0.02 mm.Tolerances: Shaft h7 for d = 15 mm.Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.Shaft h8 for the other diameters d.Hub H7.Temperature range: -30 oC to 85 oC.

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  -	Provided	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  427.52 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  NORELEM

  Shrink discs Form B (23382)

  · To connect a hollow shaft to a shaft · Suitable for static, dynamic and shock loads · For very high torques· No shift of axial shaft/hub during assembly· Self-centring

  Ler mais

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Straight	-	Steel	18 ～ 80	2.0 to 20.0 ～ 50.1 to 70.0	-	44 ～ 141	-	-

  Preço regular (excluindo IVA):

  37.22 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  [Clean & Pack]MechaLock - Compact

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products · Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ · Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ · Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-Rust Packing Oil removal General Environment Regular assembly process Post battery assembly process SH-□□ Precision Cleaning Degassing Double Packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing Double Packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.[Features]Is provided with the Centering function and is suitable for combination use with small-sized hubs.

  Ler mais

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Thin Wall	Provided	Stainless Steel	5 ～ 50	2.0 to 20.0 ～ 500.1 to 700.0	Not Provided	12 ～ 65	Single Cone Type	Mechanical Type (Wedge Type)

  Preço regular (excluindo IVA):

  81.82 €～

  Data de envio regular:

  9 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  [Clean & Pack]MechaLock - Standard

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products · Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ · Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ · Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-Rust Packing Oil removal General Environment Regular assembly process Post battery assembly process SH-□□ Precision Cleaning Degassing Double Packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing Double Packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.

  Ler mais

  CAD:

  2D

  /3D

  Type	Centering	Body Material	Shaft Bore Dia. d(mm)	Allowable Torque Range(N•m)	Surface Treatment	Hub Dia. D1(mm)	Tightening Structure	Tightening Method
  Flanged	Provided	Stainless Steel	5 ～ 50	2.0 to 20.0 ～ 700.1 to 1000.0	Not Provided	16 ～ 72	Single Cone Type	Mechanical Type (Wedge Type)

  Preço regular (excluindo IVA):

  88.61 €～

  Data de envio regular:

  7 dias úteis

  Configurar