Registar
Categoria
Ver mais
Condições de filtragem

Limpar tudo

  • Estoque
  • Fabricante
  • CAD

    • Levelling Feet

      Selected Product

      70 itens
      * Informações sobre dias de expedição, custos de expedição e preços
      Lista
      Foto
      Comparar especificações
    • 1
    • 2
    • Seguinte
      • Leveling feet, foot / threaded stud Stainless Steel
        • DESCONTO
        • Volume Discount

        GANTER

        Leveling feet, foot / threaded stud Stainless Steel

        The static load of the levelling feet GN 343.6 is limited by the laod capacity of the Stainless Steel ball joint with threaded stud (AISI 303).The static load values in the above table refer to a net vertical load in relation to the ball socket. Under normal operating conditions side loadting or angular loading is not uncommon and the load capacity would be considerable reduced which must be taken into consideration.Levelling feet GN 343.6 cannot be disassembled.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        13.54 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Levelling feet with threaded stud, Steel
        • DESCONTO
        • Volume Discount

        GANTER

        Levelling feet with threaded stud, Steel

        The static load of the levelling feet GN 343.2 is limited by the load capacity of the ball joint with threaded stud (tensile strength class 5.8 (500 N/mm2)).The static load values (only valid for Type OS / KS) in the above table refer to a net vertical load in relation to the levelling foot. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerably reduced which must be taken into consideration.Levelling feet GN 343.2 cannot be disassembled.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        6.42 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Levelling Feet / GN 30 / Steel / Zinc Plated / Rubber Inlaid / Black, White / A1, A2
        • DESCONTO
        • Volume Discount

        GANTER

        Levelling Feet / GN 30 / Steel / Zinc Plated / Rubber Inlaid / Black, White / A1, A2

        Levelling feet GN 30 will be delivered mounted and are not removable.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        10.50 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Ball jointed levelling feet, Plastic, Stainless Steel
        • DESCONTO
        • Volume Discount

        GANTER

        Ball jointed levelling feet, Plastic, Stainless Steel

        Ball jointed levelling feet GN 638 feature a smaller size ball diameter than the trunk of the threaded stud. As a result the studs can be screwed into position from the ball side. The ball end can easily be hammered in and also dismantled.Details regarding the static load capacity have been established by a series of tests but are indicative only. For these tests the loads have been placed vertically and centrally over the stud. At the measured load of 3,5 kN there was no remaining deformation visible on the thrust pad nor was there any breakage.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        2.56 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Stainless Steel-Levelling Elements / GN 355
        • Volume Discount

        GANTER

        Stainless Steel-Levelling Elements / GN 355

        Levelling elements GN 355 are used for levelling and adjustment in machines and equipment.They consist of a levelling screw, a cylinder screw with disk and a spherical washer. After making the adjustment using the assembly tools GN 355.1 available as accessory, the screw is tightened firmly causing the levelling screw and the spherical washer DIN 6319 underneath to spread and is so secured against twisting in the taphole.The values for w and x given in the table and for the static load capacity are to be seen as reference values which may differ depending on the prevailing situation. In general, they do not constitute a warranty of condition. The user must determine whether the product is suitable for the intended purpose.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        19.58 €～
        Data de envio regular:
        4 dias úteis
        Configurar
      • Stainless Steel-Levelling Feet / GN 31
        • DESCONTO
        • Volume Discount

        GANTER

        Stainless Steel-Levelling Feet / GN 31

        GN 31 Stainless Steel-Levelling feet with vulcanised rubber (Type B3, B4, C3 and C4) and screw version W feature fewer dead spots owing to their construction method and are also easier to clean. Stainless Steel-Levelling feet GN 31 will be delivered mounted and are not removable.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        12.82 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Leveling Mount Unit
        • Volume Discount

        MISUMI

        Leveling Mount Unit

        Unit for mounting levelling feet for aluminium extrusions. Set of adjusters, plates, screws and nuts.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        Leveling Mounts
        Preço regular (excluindo IVA):
        14.68 €～
        Data de envio regular:
        5 dias úteis
        Configurar
      • Leveling Mounts / Standard Type
        • Volume Discount

        MISUMI

        Leveling Mounts / Standard Type

        Space saving type leveling mount. When mounted directly on the aluminum extrusion, the pad does not protrude from the outer dimensions.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        Leveling Mounts
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Stainless Steel-Levelling Feet / GN 23
        • DESCONTO
        • Volume Discount

        GANTER

        Stainless Steel-Levelling Feet / GN 23

        Stainless Steel-Levelling feet GN 23 will be delivered mounted and are not removable.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        51.64 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Levelling feet, threaded bushing Stainless Steel
        • DESCONTO
        • Volume Discount

        GANTER

        Levelling feet, threaded bushing Stainless Steel

        Levelling feet GN 343.7 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.Exceeding the static values specified in the above table could lead to failure of the plastic component.The above values have been arrived at by a series of load tests whereby a defined number of levelling feet were subjected to a vertical load over a defined period.Levelling feet GN 343.7 are supplied assembled, but are removable.The static load of the levelling feet GN 343.7 / GN 343.8 is limited by the load capacity of the Stainless Steel ball joint (AISI 303). The static load values in the above table refer to a net vertical load in relation to the levelling foot. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerably reduced which must be taken into consideration.Levelling feet GN 343.7 / GN 343.8 cannot be disassembled.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        3.98 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Anchors for Aluminum Extrusions
        • Volume Discount
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        Anchors for Aluminum Extrusions

        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        Anchor
        Preço regular (excluindo IVA):
        10.71 €～
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Anchors / Heavy Type
        • DESCONTO
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Anchors / Heavy Type

        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        Anchor
        Preço regular (excluindo IVA):
        20.01 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Levelling elements, Steel
        • Volume Discount

        GANTER

        Levelling elements, Steel

        Levelling elements GN 355 are used for levelling and adjustment in machines and equipment.They consist of a levelling screw, a cylinder screw with disk and a spherical washer. After making the adjustment using the assembly tools GN 355.1 available as accessory, the screw is tightened firmly causing the levelling screw and the spherical washer DIN 6319 underneath to spread and is so secured against twisting in the taphole.The values for w and x given in the table and for the static load capacity are to be seen as reference values which may differ depending on the prevailing situation. In general, they do not constitute a warranty of condition. The user must determine whether the product is suitable for the intended purpose.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        16.26 €～
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Stainless Steel-Levelling feet with mounting lug
        • DESCONTO
        • Volume Discount

        GANTER

        Stainless Steel-Levelling feet with mounting lug

        Stainless Steel-Levelling feet GN 33 will be delivered mounted and are not removable.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        14.38 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Anchor Stands / 4-point Anchor / 2-point Anchor
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Anchor Stands / 4-point Anchor / 2-point Anchor

        [Specifications]・Type: Anchor Stands for Aluminum Extrusions・Material: EN 1.0320 Equiv. (hot coiled)・Extrusion Series: HFS
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        Anchor
        Preço regular (excluindo IVA):
        14.00 €～
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Ball jointed levelling feet, Plastic / Steel
        • DESCONTO
        • Volume Discount

        GANTER

        Ball jointed levelling feet, Plastic / Steel

        Ball jointed levelling feet GN 638 feature a smaller size ball diameter than the trunk of the threaded stud. As a result the studs can be screwed into position from the ball side. The ball end can easily be hammered in and also dismantled.Details regarding the static load capacity have been established by a series of tests but are indicative only. For these tests the loads have been placed vertically and centrally over the stud. At the measured load of 3,5 kN there was no remaining deformation visible on the thrust pad nor was there any breakage.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        2.22 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Levelling sets, short version
        • Volume Discount

        GANTER

        Levelling sets, short version

        Levelling sets GN 350.1 are used for levelling, adjusting and linking operations if small dimensions are given.They comprise a threaded upper sleeve and a female threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves as a height limiter for the max. height.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        31.72 €～
        Data de envio regular:
        7 dias úteis
        Configurar
      • Spherical levelling washers, Steel
        • Volume Discount

        GANTER

        Spherical levelling washers, Steel

        Spherical levelling washers GN 350.3 have been designed to match the levelling sets GN 350, GN 350.1, GN 350.2 and GN 350.5.The two spherical washers are used together „undetachably“.The load bearing capacity of these spherical washers is relatively high. This is not only due to the material quality but also to the matched sphere of the concave „pan“.Furthermore it is recommended using high-strength washers for bridging d2.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        17.62 €～
        Data de envio regular:
        7 dias úteis
        Configurar
      • Stainless Steel-Levelling elements / GN 355.2 / Diameter7
        • Volume Discount

        GANTER

        Stainless Steel-Levelling elements / GN 355.2 / Diameter7

        [Specifications]・Diameter d2: 7Stainless steel leveling elements GN 355.2 are used for leveling and adjustment in machines and equipment. They consist of a leveling screw, a socket cap screw with disk and a sphe-rical washer.
        Ler mais
        Selected Product
        -
        Preço regular (excluindo IVA):
        30.06 €
        Data de envio regular:
        7 dias úteis
        Configurar
      • Anchor Stands for Aluminum Extrusions
        • DESCONTO
        • Volume Discount
        • Stock

        MISUMI

        Anchor Stands for Aluminum Extrusions

        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        Anchor
        Preço regular (excluindo IVA):
        13.57 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Leveling Foot
        • Volume Discount
        • Stock

        NIC AUTOTEC

        Leveling Foot

        [Features] 95 mm long, 60 mm wide.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        Leveling Mounts
        Preço regular (excluindo IVA):
        4.15 €～
        Data de envio regular:
        6 dias úteis
        Configurar
      • Levelling feet, foot plastic / threaded bushing steel
        • DESCONTO
        • Volume Discount

        GANTER

        Levelling feet, foot plastic / threaded bushing steel

        Levelling feet GN 343.3 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.Exceeding the static values specified in the above table could lead to failure of the plastic component.The above values have been arrived at by a series of load tests whereby a defined number of levelling feet were subjected to a vertical load over a defined period.Levelling feet GN 343.3 are supplied assembled, but are removable.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        2.92 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Levelling feet, threaded bushing steel
        • DESCONTO
        • Volume Discount

        GANTER

        Levelling feet, threaded bushing steel

        Levelling feet GN 343.1 cannot be disassembled.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        5.90 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Levelling sets with spherical washer
        • Volume Discount

        GANTER

        Levelling sets with spherical washer

        Levelling sets GN 350.2 are used for levelling, adjusting and linking operations. The spherical washer allows precise installation of two non parallel planes at a required gradient up to ≈ 4°.They comprise a threaded upper sleeve and a female threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves as a height limiter for the max. height.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        47.16 €～
        Data de envio regular:
        7 dias úteis
        Configurar
      • Bull's Eye Levels / GN 2279 / ALN, ALS / K Colourless-transparent
        • Volume Discount

        GANTER

        Bull's Eye Levels / GN 2279 / ALN, ALS / K Colourless-transparent

        Bull´s eye levels GN 2279 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.Type A is used if the spirit level is to be used as a tool, e.g. at different measuring points.The spirit levels are aligned in relation to the reference or contact surface, such that the bubble is located inside the marking ring once the horizontal position of the contact surface is reached.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        10.76 €～
        Data de envio regular:
        7 dias úteis
        Configurar
      • Levelling feet with vibration absorbing
        • DESCONTO
        • Volume Discount

        GANTER

        Levelling feet with vibration absorbing

        The specified load in the above table is a recommendation up to which the damping insert can be permanently subjected.This static load equals a thrust on the area of 0,4 N/mm2, at which the damping material reaches its optimum dynamic damping ability. This also takes into account an additional load up to 0,6 N/mm2 in the event of a dynamic load.Levelling feet GN 342.2 cannot be disassembled.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        15.00 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Levelling feet, steel sheet, zinc plated with and without rubber underlay
        • DESCONTO
        • Volume Discount

        GANTER

        Levelling feet, steel sheet, zinc plated with and without rubber underlay

        Levelling feet GN 40 are easy and very reasonably priced foot design variants.Theywill be delivered mounted and are not removable.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        4.68 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Levelling sets with spherical washer, with locknut
        • Volume Discount

        GANTER

        Levelling sets with spherical washer, with locknut

        Levelling sets GN 350.5 are used for levelling, adjusting and linking operations. The spherical washer allows precise installation of two non parallel planes at a required gradient up to ≈ 4°.They comprise a threaded upper sleeve and a female threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves as a height limiter for the max. height.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        69.92 €～
        Data de envio regular:
        7 dias úteis
        Configurar
      • Stainless Steel-Levelling Feet / GN 21
        • Volume Discount

        GANTER

        Stainless Steel-Levelling Feet / GN 21

        Stainless Steel-Levelling feet GN 21 will be delivered mounted and are not removable.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        47.66 €～
        Data de envio regular:
        7 dias úteis
        Configurar
      • Stainless Steel-Levelling feet, with and without rubber underlay
        • DESCONTO
        • Volume Discount

        GANTER

        Stainless Steel-Levelling feet, with and without rubber underlay

        Stainless Steel-Levelling feet GN 41 will be delivered mounted and are not removable.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        -
        Preço regular (excluindo IVA):
        6.30 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Anchor Stands / Sheet Metal
        • Volume Discount
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        Anchor Stands / Sheet Metal

        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        Anchor
        Preço regular (excluindo IVA):
        8.95 €～
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Leveling Mounts / Space Saving Type
        • DESCONTO
        • Volume Discount

        MISUMI

        Leveling Mounts / Space Saving Type

        Standard type leveling mount. Sizes from M5 to M20 are available.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        Leveling Mounts
        Preço regular (excluindo IVA):
        10.71 €～
        Preço regular (excluindo IVA):
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Anchor Bracket
        • Volume Discount

        NIC AUTOTEC

        Anchor Bracket

        This is an anchor holder for the aluminium extrusion. There are T-shaped and L-shaped types. [Materials]EN 1.0038 Equiv.
        Ler mais
        CAD:
        2D
        /3D
        Selected Product
        Anchor
        Preço regular (excluindo IVA):
        16.09 €～
        Data de envio regular:
        6 dias úteis
        Configurar
      • Ball Type Adjuster

          YUKI LABORATORY

          Ball Type Adjuster

          [Features]· The swivel mechanism also supports distorted floor surfaces.[Note]· When the solvent resistance of the floor coating is low, the rubber of the adjuster may stick to the floor and lose its adhesive.· The foot is a fit-in type, so it may become detached. Press-fit again if it comes off.
          Ler mais
          CAD:
          2D
          Selected Product
          Leveling Mounts
          Preço regular (excluindo IVA):
          9.66 €～
          Data de envio regular:
          6 dias úteis
          Configurar
        • Bull's Eye Levels / GN 2277 / K Colourless-transparent
          • DESCONTO
          • Volume Discount

          GANTER

          Bull's Eye Levels / GN 2277 / K Colourless-transparent

          Bull´s eye levels GN 2277 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.The spirit levels are aligned in relation to the reference surface so that the bubble is located inside the marking ring when the horizontal position of the contact surface is achieved.
          Ler mais
          CAD:
          2D
          /3D
          Selected Product
          -
          Preço regular (excluindo IVA):
          13.16 €～
          Preço regular (excluindo IVA):
          Preço especial
          Data de envio regular:
          Item em stock: 1 dia útil
          Alguns artigos podem ser enviados no próprio dia
          Configurar
        • Levelling feet with mounting lug
          • DESCONTO
          • Volume Discount

          GANTER

          Levelling feet with mounting lug

          Levelling feet GN 32 will be delivered mounted and are not removable.
          Ler mais
          CAD:
          2D
          /3D
          Selected Product
          -
          Preço regular (excluindo IVA):
          10.76 €～
          Preço regular (excluindo IVA):
          Preço especial
          Data de envio regular:
          Item em stock: 1 dia útil
          Alguns artigos podem ser enviados no próprio dia
          Configurar
        • Levelling feet, foot / threaded bushing Stainless Steel
          • DESCONTO
          • Volume Discount

          GANTER

          Levelling feet, foot / threaded bushing Stainless Steel

          Levelling feet GN 343.5 cannot be disassembled.
          Ler mais
          CAD:
          2D
          /3D
          Selected Product
          -
          Preço regular (excluindo IVA):
          11.14 €～
          Preço regular (excluindo IVA):
          Preço especial
          Data de envio regular:
          Item em stock: 1 dia útil
          Alguns artigos podem ser enviados no próprio dia
          Configurar
        • Levelling sets, long version
          • Volume Discount

          GANTER

          Levelling sets, long version

          Levelling sets GN 350 are used for levelling and linking operations. They comprise a threaded upper sleeve and a female threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves also as a height limiter for the max. height.Normally this screw is permanently and securely locked by the static load created when the mounting screw is tightened. Should this not be sufficient, the use of a locknut (Type AK) is recommended.
          Ler mais
          CAD:
          2D
          /3D
          Selected Product
          -
          Preço regular (excluindo IVA):
          39.22 €～
          Data de envio regular:
          7 dias úteis
          Configurar
        • Stainless Steel-Spherical levelling washers
          • DESCONTO
          • Volume Discount

          GANTER

          Stainless Steel-Spherical levelling washers

          Stainless Steel-Spherical levelling washers GN 350.3 have been designed to match the levelling sets GN 350, GN 350.1, GN 350.2 and GN 350.5.The two spherical washers are used together „undetachably“.The load bearing capacity of these spherical washers is relatively high. This is not only due to the material quality but also to the matched sphere of the concave „pan“.Furthermore it is recommended using high-strength washers for bridging d2.
          Ler mais
          CAD:
          2D
          /3D
          Selected Product
          -
          Preço regular (excluindo IVA):
          25.68 €～
          Preço regular (excluindo IVA):
          Preço especial
          Data de envio regular:
          Item em stock: 1 dia útil
          Alguns artigos podem ser enviados no próprio dia
          Configurar
        • Levelling feet with fixing lug, Steel, zinc plated, rectangular shape (GN 42)
          • Volume Discount

          GANTER

          Levelling feet with fixing lug, Steel, zinc plated, rectangular shape (GN 42)

          GN 42 levelling feet can be used in a host of combinations of base plates and adjustable spindle versions.>The levelling feet can be screwed to the mounting surface use the fixing lug, which prevents lateral shifting. Moreover, the types with the rubber underlay protect sensitive surfaces.The levelling feet are supplied fully assembled and are not removable.
          Ler mais
          Selected Product
          -
          Preço regular (excluindo IVA):
          11.48 €～
          Data de envio regular:
          7 dias úteis
          Configurar
        • Stainless Steel-Levelling sets (GN 360)
          • Volume Discount

          GANTER

          Stainless Steel-Levelling sets (GN 360)

          GN 360 Stainless Steel-Levelling sets are used for leveling and to compensate for any slope when setting up machines and systems.The thread d2 can also be used as a through-hole for attachment from below. The fine thread d3 laws precise adjustment and readjustment using a DIN 1810 C-Spanner. A circlip limits the maximum path of adjustment.
          Ler mais
          Selected Product
          -
          Preço regular (excluindo IVA):
          122.36 €～
          Data de envio regular:
          7 dias úteis
          Configurar
        • Euro-Gripper-Tooling - Pedestal 50er, SW50-RD30-L90
          • New Product

          TUENKERS

          Euro-Gripper-Tooling - Pedestal 50er, SW50-RD30-L90

          Pedestal 50er, SW50-RD30-L90
          Ler mais
          Selected Product
          -
          Preço regular (excluindo IVA):
          65.49 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • Levelling feet for aluminium profiles (K0432)

            KIPP

            Levelling feet for aluminium profiles (K0432)

            · Especially suitable for tables and light installations· Equipment foot height is adjusted by turning the nut by hand or spanner· Compatible with all conventional aluminium profiles with 8 mm or 10 mm slot width
            Ler mais
            CAD:
            2D
            /3D
            Selected Product
            -
            Preço regular (excluindo IVA):
            7.50 €～
            Data de envio regular:
            4 dias úteis
            Configurar
          • Levelling feet for aluminium profiles (27840)

              NORELEM

              Levelling feet for aluminium profiles (27840)

              · Especially suitable for tables and light installations· Equipment foot height is adjusted by turning the nut by hand or spanner· Compatible with all conventional aluminium profiles with 8 mm or 10 mm slot width
              Ler mais
              Selected Product
              -
              Preço regular (excluindo IVA):
              9.67 €～
              Data de envio regular:
              4 dias úteis
              Configurar
            • Rubber Cushion
              • Volume Discount

              NIC AUTOTEC

              Rubber Cushion

              A rubber buffer that absorbs shocks. [Material] (1) SBR (2) EN 1.4016 Equiv.
              Ler mais
              CAD:
              2D
              /3D
              Selected Product
              Leveling Mounts
              Preço regular (excluindo IVA):
              5.91 €
              Data de envio regular:
              Item em stock: 1 dia útil
              Envio possível no próprio dia
              Configurar
          • 1
          • 2
          • Seguinte

            • Produtos recentemente visualizados

            Categorias relacionadas com Levelling Feet