Adjustable Feet（Properties：Standard Page 2）

?* Information on days to ship and prices

• • Promotional pricing

  

  Foot Jack FJR Model (Rubber Type)

  NABEYA

  Since it includes rubber, floors are not damaged and slipping is prevented.
  
  [Features]
  · Since it includes rubber, floors are not damaged and slipping is prevented.
  · A hex nut is press-fitted to the bottom of the base to enable quick assembly with an impact wrench, etc.
  · The rubber has liquid resistance (gasoline, kerosene, acid, alkali) and can be used from -22°C to 100°C.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.29 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Anchor Fixing D-E II /D-E II-ST

  DAIWARASHI

  A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
  
  [Features]
  · Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
  · Can easily be fixed using an anchor bolt.
  · Please use an anchor bolt.
  · Please use a 12 mm anchor bolt.
  · Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
  · Note: The screw rotates and tilts somewhat.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Heavy Weights with Rubber D-C-R

  DAIWARASHI

  A rubber equipped type adjuster for medium loads
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S

  DAIWARASHI

  A long screw adjuster with a wide adjustment range
  
  [Features]
  · Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
  A limited quantity of 500 mm total length products are available for M16 and M20.
  · D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster KC-270

  TAKIGEN

  Selections are possible from a variety of types based on the application.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster KC-30-KS

  TAKIGEN

  The bottom part is made of polyamide and features excellent chemical-resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.83 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SUN Adjusting Nut

  SUN FASTENER

  [Features]
  · The adjusting nut is a nut that includes a leg part. Commercially-available bolts can be installed on machinery to easily mount an adjusting bolt.
  · Costs are drastically reduced since commercially-available bolts can be used.
  · Since the load of the product is also received by the bolt head part, it can also be used for heavy loads and heavy weights.
  · Since re-using (recycling) is easy, it contributes to the effective use of resources.
  · Installation of machinery can be performed by temporarily placing and then performing adjustments, enabling accurate positioning to be performed easily.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.75 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjuster Pad (Standard Type)

  WOOJIN

  [Features]
  · Since reinforced polyamide is used, it features excellent chemical resistance and oil resistance.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Level Adjuster (KA)

  IMAO CORPORATION

  [Features] The stainless steel type has excellent corrosion and water resistance. Approved load: 3 kN, 5 kN.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.39 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster Bolt (500 / 600 kg Type) (with Foot Stop Plate)

  TRUSCO NAKAYAMA

  · Features an anchor hole for fixing to the floor.
  · A hole is provided to the pedestal part and to enable it to be fixed to the floor with an anchor. Used to prevent equipment movement caused by intense vibrations.
  · Machine tools, vending machines, conveyors, work benches, control panels, and scientific instruments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.85 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LV.FO - Levelling elements for ground mounting -Technopolymer base steel or stainless steel stem

  ELESA

  Levelling elements for fixing to the ground with base in black glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel or AISI 304 stainless steel articulated stem with adjusting hexagon and option of having it without or with NBR rubber no-slip disk fixed to the base.
  The fixing is carried out by means of holes, closed by a diaphragm (removable with an awl) to prevent the deposit of unsanitary residues if not used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Mount Space Saving Type (Light Duty)

  MISUMI

  [Features] This product can effectively use space even in the presence of obstacles.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adjuster AJ Series

  NANSIN

  A standard adjuster.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.59 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Leveling Foot_FDM / FDF

  NABEYA BI-TECH

  [Features]
  · A leveling foot in which the screw and pad are made of steel.
  · FDM: male thread and FDF: female thread.
  · The pad can be tilted up to 15°.
  · Effective for use on slopes.
  · There are products that include a Delrin* cap (FDM-KS/EDE-KS) and products that include a Santoprene** cap (FDM-KR/FDF-KR).
  · Material and finish: Screw/pad: SUS22L, trivalent chromate finish.
  · Lock nut: S45C, trivalent chromate finish

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.60 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LSA32, LSAR32)

  IMAO CORPORATION

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.05 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVA70, LVAR70)

  IMAO CORPORATION

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.69 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVF100, LVFR100)

  IMAO CORPORATION

  Features an excellent design and the allowable load is guaranteed even in a tilted state. Anchor type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.77 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (Adjustment Knob-Included Type) (LVA70-ELK, LVAR70-ELK)

  IMAO CORPORATION

  Features an excellent design.
  
  [Features]
  · Height adjustments are performed by manually turning a knob.
  · Falling off is prevented by a washer on the end surface of the screw part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	60.01 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LSA25, LSAR25)

  IMAO CORPORATION

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.88 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVA100, LVAR100)

  IMAO CORPORATION

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.73 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVA80, LVAR80)

  IMAO CORPORATION

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.07 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVF125, LVFR125)

  IMAO CORPORATION

  Features an excellent design and the allowable load is guaranteed even in a tilted state. Anchor type.
  
  [Features]
  · The SUS-made uses SUS304 that is excellent for rust prevention.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.96 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVF80, LVFR80)

  IMAO CORPORATION

  Features an excellent design and the allowable load is guaranteed even in a tilted state. Anchor type.
  
  [Features]
  · Since stainless steel products have a low sulfide content, they are suitable for applications in which corrosion due to weather is a concern.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.08 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LSA40, LSAR40)

  IMAO CORPORATION

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.45 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVA125, LVAR125)

  IMAO CORPORATION

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.88 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVA60, LVAR60)

  IMAO CORPORATION

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.38 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Leveling Block G Type

  NABEYA

  Can be used together with an anchor bolt and is ideal for large machinery and large surface plates.
  
  [Features]
  · Features good precision.
  · Lowest height is low.
  · Can be fixed with an anchor bolt after precise adjustment.
  · Ideal for large machinery and large surface plates.
  · Convenient for the centering of large workpieces

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	349.90 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Foot Jack FJ Type (Standard Type)

  NABEYA

  The most general foot jack. Can be used for various industrial equipment.
  
  [Features]
  · A hex nut is press-fitted into the base bottom part and the FJ-S type can be quickly assembled with an impact wrench, etc.
  · A Phillips head slot has been provided on the base bottom of the FJ type and assembly can be performed using a screwdriver, etc.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.34 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Block AP Type

  NABEYA

  A leveling block that can also be used sideways or upside down.
  
  [Features]
  · Can also be used sideways or upside down.
  · An attachment can be mounted to the tapped hole on the top surface and for which point contacts can also be adjusted.
  · Can also be used for the centering of workpieces when cutting or to prevent chattering.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	142.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Leveling Block T-Type

  NABEYA

  Includes a horizontal deviation / vertical deviation preventing mechanism.
  
  [Features]
  · The parts are precisely processed to have parallelism, so precise fine adjustments can be made.
  · The overall height is made as low as possible to provide outstanding stability.
  · The product features a horizontal deviation / vertical deviation mechanism and displacement with regards to dynamic loads is minimal.
  · Can also be fixed using an anchor bolt.
  · Ideal for five-face machining devices, large grinding machines, various dedicated machinery, large printing machines, measurement machinery, etc.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	300.05 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Leveling Blocks U Model

  NABEYA

  Compensates for sloped installation surfaces with a spherical receiver plate. Includes a horizontal deviation / vertical deviation preventing mechanism.
  
  [Features]
  · Compensates for sloped installation surfaces with a spherical receiver plate.
  · The spherical part has undergone precision processing having with contact ratio of 70% or higher, enabling alignment to be performed easily. The displacement value in relation to the load is also very small.
  · The product has a horizontal deviation / vertical deviation mechanism, is resistant to dynamic loads, and enables leveling to be performed quickly with a low level of torque.
  · The thickness of each part is thick and can withstand abrupt loads.
  · Can also be fixed using an anchor bolt.
  · Ideal for vertical lathes, grinders, NC machine tools, various special devices, printing machines, etc.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	382.82 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Foot Jack FJC Type (Heavy Load Type)

  NABEYA

  A type of casting base that can support heavy loads.
  
  [Features]
  · A Phillips head slot has been provided on the base bottom and assembly can be performed using a screwdriver, etc.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Block, BW Type

  NABEYA

  Ideal for the leveling of heavy objects.
  
  [Features]
  · Ductile cast and tough.
  · A thrust roller bearing is used for smooth operation.
  · BW10 is made of tough cast iron FC300 and a thrust roller bearing is not used.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,309.81 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Leveling Block, UJ Type (for Remote Operation)

  NABEYA

  [Features]
  · Enables remote-controlled leveling by being installed under surface plates and various machinery where it is hard to reach.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	310.20 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Leveling Blocks AN Model

  NABEYA

  No flange. Can be installed in narrow places.
  
  [Features]
  · An A type without a flange that can be installed in narrow spaces.
  · Convenient for installation on angle bases.
  · Its functions, mechanism, and capacity are the same as the A type.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	169.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Leveling Block, C Type

  NABEYA

  A standard leveling block that can be used together with an anchor bolt.
  
  [Features]
  · Features good precision.
  · Machinery installation costs are reduced.
  · Can be fixed with an anchor bolt.
  · Features the best rigidity.
  · Installation is easy.
  · Ideal for the installation of milling machines, radial drilling machines, planer machines, surface plates, etc.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	140.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Leveling Block, L Type

  NABEYA

  A lightweight and compact leveling block with a low overall height.
  
  [Features]
  · The overall height is low and it is lightweight.
  · Nitrile rubber is pasted to the top surface for slip prevention.
  · L-2R has nitrile rubber coating on the bottom surface as well.
  · The main body is an aluminum forged item and lightweight.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	326.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjuster for Anchor Fixing (Large Pedestal Type) D-E-W

  DAIWARASHI

  A medium load type adjuster for anchor fixing in which the base is wide and stable
  
  [Features]
  · By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.
  · Note: The screw shaft tilts somewhat

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adjuster with Rubber for Heavy Weights (Bearing Equipped) D-H-R

  DAIWARASHI

  An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.
  
  [Features]
  · Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
  · Groove processing is applied to the rear surface of the rubber to make it non-slippery.
  · Effectively protects floors.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	71.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Heavy Weights (Bearing Equipped) D-H

  DAIWARASHI

  An adjuster for heavy weights with a built-in thrust bearing
  
  [Features]
  · Suitable for the adjustment of heavy machinery.
  · Stability is outstanding since a large diameter bolt is used.
  · Smooth adjustments can be made even for non-heavy machinery.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Standard Receiver Adjuster with Plastic D-A II /D-B II

  DAIWARASHI

  A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
  
  [Features]
  · Does not stain or damage floors since a special plastic is molded into the receiver.
  · The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
  · Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Standard Receiver Adjuster, Small Diameter Type D-F / D-F-C

  DAIWARASHI

  An adjuster whose screw and base have small diameters
  
  [Features]
  · Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
  · Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
  · A light load type with a receiver diameter that is also small.
  · Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.11 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Standard Receiver Adjuster, Space Saving Type D-B50 / D-A60 / D-A65

  DAIWARASHI

  A standard type adjuster in which the adjuster base is compact
  
  [Features]
  · An adjuster whose pedestal part is a compact type.
  · The screw rotates and tilts somewhat.
  · Since the receiver diameter is designed to be smaller than D-A/D-B, it is useful for saving space.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Standard Receiver Type Adjuster D-A / D-B

  DAIWARASHI

  The most general standard type adjuster
  
  [Features]
  · The screw shaft rotates and tilts somewhat.
  · A standard type that can be used as the adjustment bolt for any machinery.
  · The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
  · D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.99 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Walls D-D I

  DAIWARASHI

  A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
  
  [Features]
  · A special adjuster for walls.
  · Please use together with D-D II.
  · Please use accessories such as hex nuts, etc.
  · The portion that makes contact with the wall is folded.
  · As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
  · In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
  · Please refer to the drawings for use.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.34 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...