Adjustable Feet（Page 6）

?* Information on days to ship and prices

• 

  Adjuster Bolt (500 / 600 kg Type)

  TRUSCO NAKAYAMA

  · A resin cover is attached to the pedestal portion and prevents the damaging of floors.
  · Machine tools, vending machines, conveyors, work benches, computer racks, control panels, and scientific instruments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.21 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  OSS Leveling Block OS2 Type

  OHNISHI MFG

  [Features]
  · Construction costs for installation can be reduced since installation is easy.
  · Can be installed and fixed using an anchor bolt.
  · Since the adjustment part has three stages, the surface that comes in contact with the ground is resistant to displacement.
  
  [Uses]
  · For the installation of various milling machines, planers, machine tools, surface plates, etc.

  Select to compare

  Configure now
  Starting from∗ ：	122.68 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  OSS Leveling Block OSTET Type

  OHNISHI MFG

  [Features]
  · Construction costs for installation can be reduced since installation is easy.
  · Oil-resistant rubber is used on the top and bottom surfaces, the overall height is low, it is lightweight, and can be installed anywhere.
  
  [Uses]
  · For the installation of various milling machines, planers, machine tools, surface plates, etc.
  · For work in environments where oil is used.

  Select to compare

  Configure now
  Starting from∗ ：	405.95 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  OSS Leveling Block OSH Type

  OHNISHI MFG

  [Features]
  · Construction costs for installation can be reduced since installation is easy.
  · Since the slide part is not exposed, it is difficult to damage.
  · Since the adjustment part has three stages, the surface that comes in contact with the ground is resistant to displacement.
  
  [Uses]
  · For the installation of various milling machines, planers, machine tools, surface plates, etc.

  Select to compare

  Configure now
  Starting from∗ ：	213.32 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Adjuster Bolt (Stainless Steel)

  SHIMIZU

  [Features]
  · Standard adjuster bolt.
  · Easy height adjustment after installation.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.19 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Adjuster Bolt (Trivalent Bright Chromate)

  SHIMIZU

  [Features]
  · Standard adjuster bolt.
  · Easy height adjustment after installation.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.17 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Adjuster

  WAKISANGYO

  [Features]
  · Ultra-durable and can be used for desks, furniture, and much more.
  
  [Applications]
  Used to adjust and stabilize wobbly desks and chairs

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.24 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Die-Cast Adjuster

  WAKISANGYO

  [Features]
  High-grade adjuster made with zinc die-casting.
  
  [Applications]
  Used to stabilize wobbly desks and chairs

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.86 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjuster With Felt【4 Pieces Per Package】

  WAKISANGYO

  [Features]
  · Sturdy felt prevents scratches on the floor.
  · Reduces noisy vibrations when moving furniture.
  
  [Applications]
  · Used to adjust and stabilize wobbly desks and chairs

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.84 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Free-Roll Adjuster

  WAKISANGYO

  [Features]
  Made up of 2 parts, so the upper part (integrated with the bolt) can rotate independently of the base. This enables easy height adjustment without needing to lift the furniture.
  
  [Applications]
  Used to adjust and stabilize desks and chairs

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.46 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Hexagonal Adjuster

  WAKISANGYO

  [Features]·Heavy objects can also be level-adjusted with a wrench. [Applications]·For desks, chairs, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.11 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  LSQ.A-SST - Levelling elements -Technopolymer base stainless steel stem

  ELESA

  Levelling elements with base in black glass fibre reinforced polyamide-based technopolymer, stem with threaded AISI 304 stainless steel joint with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LV.A-125-APS - Levelling elements -Technopolymer base steel stem

  ELESA

  Levelling elements with base in black glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel articulated pass-through stem with adjusting hexagon, retaining ring and zinc-plated steel plain washer and option of having it without or with NBR rubber no-slip disk fixed to the base.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  LV.A-ELK - Levelling elements -Technopolymer base and knob steel stem

  ELESA

  Levelling elements with base in black glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel articulated stem, integrated control knob in ELK type technopolymer, washer and retaining screw (M4x10) in burnished steel and option of having it without or with SBR rubber no-slip disk fixed to the base.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.46 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• 

  LV.F-125-ACV - Levelling elements for ground mounting -Technopolymer base steel stem

  ELESA

  Levelling elements for fixing to the ground with base in black glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel articulated pass-through stem with adjusting hexagon fixed to the base by means of a screw and concave washer supporting the stem in polished zinc-plated steel and option of having it without or with NBR rubber no-slip disk fixed to the base.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.13 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• • Promotional pricing

  

  LV.F-125-APS - Levelling elements for ground mounting -Technopolymer base steel stem

  ELESA

  Levelling elements for ground mounting with base in black glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel articulated pass-through stem with adjusting hexagon and option of having it without or with NBR rubber no-slip disk fixed to the base.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LVQ.A-SST - Levelling elements -Technopolymer base stainless steel stem

  ELESA

  Levelling elements with base in black glass fibre reinforced polyamide-based technopolymer, stem with threaded AISI 304 stainless steel joint with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.
  The special knurling under the lower lip of the base provides excellent stability and grip when using the levelling element without no-slip disk even on surfaces that are not perfectly flat.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LVQ.FO-SST - Levelling elements for ground mounting -Technopolymer base stainless steel stem

  ELESA

  Levelling elements for fixing to the ground with base in black glass fibre reinforced polyamide-based technopolymer, threaded AISI 304 stainless steel articulated stem with adjusting square and option of having it without or with NBR rubber no-slip disk fixed to the base.
  The fixing is carried out by means of holes, closed by a diaphragm (removable with an awl) to prevent the deposit of unsanitary residues if not used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LVQ.F-SST - Levelling elements for ground mounting -Technopolymer base stainless steel stem

  ELESA

  Levelling elements for fixing to the ground with base in black glass fibre reinforced polyamide-based technopolymer, threaded AISI 304 stainless steel articulated stem with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.
  The fixing is carried out by means of two 180° holes, closed by a diaphragm (removable with an awl) to prevent the deposit of unsanitary residues if not used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LX-HS - Levelling elements -Technopolymer base steel stem with hexagon socket at the upper end

  ELESA

  Levelling elements with base in polyamide-based technopolymer with adjusting hexagon, black colour, threaded stem in polished zinc-plated steel with hexagon socket at the top and base with cross recess for screwdriver.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Seating Elements, with plastic contact surface, orienting

  HALDER

  Can be used as screw-in foot or thrust pad.
  The plastic coating is gentle and protects high-quality surfaces. In addition, the oscillating seating is suitable for non-parallel surfaces.

  Select to compare

  Configure now
  Starting from∗ ：	18.03 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Support Legs

  HALDER

  The support legs are universally usable as adjustable legs.
  The plate is screwed to the threaded pin and nut by a stainless steel fastening screw, and is also glued.

  Select to compare

  Configure now
  Starting from∗ ：	4.70 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet with vibration damping element / Natural rubber / Zinc plated / M10-M20 / GN 148

  GANTER

  [Specifications]
  ・Material: Natural rubber
  ・Surface treatment: Zinc plated
  ・Threaded insert: Steel, Zinc plated
  ・Thread d2: M10-M20
  ・Type: with two-hole flange, with four-bolt flangeI
  ・dentification no.: without tear-off lock, with tear-off lock
  ・Hardness: soft, hard
  
  Leveling feet GN 148 are designed for setting up heavy machinery and units with insulation against vibrations.
  This has a positive impact on the lifetime of machines and additionally reduces the noise pollution.
  The structure is such that horizontal forces are also absorbed.
  The design with tear-off lock (identification no. 2) protects the leveling feet from destruction caused by tear-off under excessive tension loads.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	41.82 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Spacer disks foot disks, rubber underlay, vulcanized

  GANTER

  [Specifications]
  ・Material: Stainless Steel
  ・Color: Black
  ・h: 3-5
  ・d2: 4, 5, 6
  ・Type: Mounting with fixing hole, Mounting with adhesive pad
  ・Hardness: Hardness Shore A
  
  Spacer disks and foot disks GN 438 / GN 438.5 provide a damping and muffling function and protect surfaces from damage.
  By stacking several spacer disks on each other, the spring rate of the package can be increased, which opens up new possibilities for use.
  Foot discs are used for installing small machines, systems or devices and, for the type A, are attached with screws. Bear in mind the maximum height of the screw head. Alternatively, after the protective film has been removed, the type B can be adhered to all suitable and clean surfaces by means of the adhesive pad.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spacer disks foot disks, rubber underlay, vulcanized

  GANTER

  [Specifications]
  ・Material: Steel
  ・Surface treatment: Zinc plated
  ・Color: Black
  ・h: 3-5
  ・d2: 4, 5, 6
  ・Type: Mounting with fixing hole, Mounting with adhesive pad
  ・Hardness: Hardness Shore A
  
  Spacer disks and foot disks GN 438 / GN 438.5 provide a damping and muffling function and protect surfaces from damage.
  By stacking several spacer disks on each other, the spring rate of the package can be increased, which opens up new possibilities for use.
  Foot discs are used for installing small machines, systems or devices and, for the type A, are attached with screws. Bear in mind the maximum height of the screw head. Alternatively, after the protective film has been removed, the type B can be adhered to all suitable and clean surfaces by means of the adhesive pad.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.70 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Levelling feet (K0433)

  KIPP

  · For mounting on smooth surfaces
  
  · Equipment foot height is adjusted by turning the nut by hand or spanner
  
  · Material: housing fibreglass reinforced thermoplastic, hex head screw steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.27 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet in Hygienic DESIGN, Form B (K1303)

  KIPP

  · Specially for the hygiene sector
  
  · Application sectors: foodstuff industry, breweries, dairies, beverage and pharmaceutical industries
  
  · High surface quality
  
  · 3-A certified
  
  · Swivel angle 15°

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	75.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet stainless steel for sterile areas (K0741)

  KIPP

  · Components for assembling a swivel foot
  
  · Application sectors: machine construction, foodstuff industry, medical technology, pharmaceutical industries, packaging industry
  
  · The O-ring keeps dirt out
  
  · Material: Foot plate and threaded spindle, 1.4301 stainless steel
  
  · Equipment Acceptance Certificate from USDA

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet with vibration absorption (K0420)

  KIPP

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Damper plate absorbs vibrations and prevents the swivel foot slipping

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet, Form A and B (K0395)

  KIPP

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · The anti-slip plate absorbs vibrations and prevents swivel foot slipping
  
  · Various materials

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet, Form G (K0395)

  KIPP

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · The anti-slip plate absorbs vibrations and prevents swivel foot slipping
  
  · Various materials

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet, Form A and B (07144)

  NORELEM

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Various materials

  Select to compare

  Configure now
  Starting from∗ ：	9.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet (27841)

  NORELEM

  · For mounting on smooth surfaces
  
  · Equipment foot height is adjusted by turning the nut by hand or spanner
  
  · Material: housing fibreglass reinforced thermoplastic, hex head screw steel

  Select to compare

  Configure now
  Starting from∗ ：	9.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet with vibration absorption (27806)

  NORELEM

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Damper plate absorbs vibrations and prevents the swivel foot slipping

  Select to compare

  Configure now
  Starting from∗ ：	15.61 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet with hole (27798)

  NORELEM

  · Compensates for uneven ground
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · The rotatable threaded spindle is pressed into the foot plate
  
  · Various versions

  Select to compare

  Configure now
  Starting from∗ ：	0.90 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet with knurled base (27797)

  NORELEM

  · Compensates for uneven ground
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Knurled base
  
  · Various versions

  Select to compare

  Configure now
  Starting from∗ ：	0.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet with hex. base (27796)

  NORELEM

  · Compensates for uneven ground
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Hexagonal base
  
  · Various versions

  Select to compare

  Configure now
  Starting from∗ ：	0.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet round with hex. collar (27795)

  NORELEM

  · Compensates for uneven ground
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Assembly aid: hexagon and cross slit in plate base
  
  · Various versions

  Select to compare

  Configure now
  Starting from∗ ：	0.58 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet round (27794)

  NORELEM

  · Compensates for uneven ground
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Assembly aid: cross slit in plate base
  
  · Various versions

  Select to compare

  Configure now
  Starting from∗ ：	0.55 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet steel, Form B (27792)

  NORELEM

  · High load swivel feet
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Any plate can be combined with any threaded spindle or ball joint
  
  · Anti-slip plates absorb vibrations and prevent the swivel foot slipping

  Select to compare

  Configure now
  Starting from∗ ：	12.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet steel, Form A (27792)

  NORELEM

  · High load swivel feet
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Any plate can be combined with any threaded spindle or ball joint
  
  · Anti-slip plates absorb vibrations and prevent the swivel foot slipping

  Select to compare

  Configure now
  Starting from∗ ：	11.85 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet in Hygienic DESIGN, Form B (27791-05)

  NORELEM

  · Specially for the hygiene sector
  
  · Application sectors: foodstuff industry, breweries, dairies, beverage and pharmaceutical industries
  
  · High surface quality
  
  · 3-A certified
  
  · Swivel angle 15°

  Select to compare

  Configure now
  Starting from∗ ：	93.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Thread cover, Stainless Steel in Hygienic DESIGN (K1821)

  KIPP

  Material:
  Sleeve stainless steel 1.4301.
  Rubber seal silicon, FDA certified.
  Version:
  Sleeve high-gloss polished.
  Rubber seal, blue.
  Note:
  Certified according to 3-A Sanitary Standard.
  The thread cover caps protruding external threads and thus protects them from dirt.
  The high surface finish quality prevents dirt from adhering and reduces cleaning times to a minimum.
  Application:
  The thread cover is particularly suitable for machines, plants and appliances in the foodstuff, brewery, dairy, beverage and pharmaceutical industries.
  Accessories:
  Levelling feet K1303.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.28 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Spacers MN 686.D, Standard

  MAEDLER

  Material:
  Standard Version: 42CrMo4V, Nr. 1.7225, zinc-plated and blue passivated.
  Optional, additional spacer for height adjustment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.82 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Spacers MN 686.D, Stainless Steel

  MAEDLER

  Material:
  Stainless version: Stainless steel 1.4301 (AISI 304).
  Optional, additional spacer for height adjustment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...