Locks / latches for furniture（Page 3）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Latch Type Flat Handle A-540
TAKIGEN
[Features]
· One touch open and close A-540-1· With 3-way tightening, even big doors can be tightly closed.
· A-540-1/3 Can be unlocked from inside with a safety mechanism.
· Rust resistant satellite chrome plating (25 micron) A-540-1/3 is dust proof.
· For left hand or right hand use (the drawings and photo show right hand use)- 3D CAD data available
Configure nowStarting from∗ ： 67.40 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Latch Type Flat Handle A-542
TAKIGEN
[Features]
· One-touch opening and closing panel with new design with good operability. Thin handle of 26 mm on the lower part.
· A-542-3 can be unlocked from inside with 3 safety mechanisms.
· The knob can be removed.
· A-542-3 3-point tightening (with key) A-542-4 waterproof type with 1-point tightening (without key).
· For right or left opening (this figure/photo shows right opening)- 2D CAD data available
Configure nowStarting from∗ ： 38.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Latch Type Flat Handle A-884
TAKIGEN
[Features]
· The handle can be operated from inside and outside of the door.
· 1-point tightening (latch type), 2-point tightening, 3-point tightening, and outer / inner handle can be chosen- 2D CAD data available
Configure nowStarting from∗ ： 32.63 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing
Plastic Latch Type Flat Handle AP-252
TAKIGEN
[Features]
· Vibration resistant latch and striker.
· Flat type with few protrusions on the door surface.
· Small and lightweight type- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 24.02 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Plastic Lever Lock CP-361
TAKIGEN
[Features]
· Latch lock with simple structure where the latch and lever are integrated.
· Lightweight, made of resin.
· Matches plastic housing. ·
· Doors can be opened and closed with one touch- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 12.71 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
One-Touch Handle A-123
TAKIGEN
[Features]
· Lock comes standard with the TAK60, a new type of reversible key with an easy to use dust-proof shutter (A-123-TAK60).
· One touch lock that locks just by closing the door.
· For left hand or right hand use (the drawings and photo show right hand use)- 3D CAD data available
Configure nowStarting from∗ ： 34.10 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Flash Handle for Sliding Door A-878-2
TAKIGEN
[Features]
· Small handle for sliding door.
· Sickle lock type and rod operation type are available.
· Since it is a flat type with few protrusions, it can also be used for double sliding doors.
· Since it is surface mounted, there is no restriction on thickness.
· Lock has small reversible key.
· For left hand or right hand use (the drawings and photo show right hand use)- 2D CAD data available
Configure nowStarting from∗ ： 79.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat Handle for Sliding Door A-154-N-C
TAKIGEN
[Features]
· Soft design with rounded shape. Easy to open and close with one action, dust-proof with rubber packing.
· Flat type with few protrusions on the door surface.
· For installation A-154-C is compatible.
· For left hand or right hand use (the drawings and photo show right hand use)- 2D / 3D CAD data available
Configure nowStarting from∗ ： 68.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat Latch Lock C-312
TAKIGEN
Features:
· The 3mm door surface projection is unobtrusive
· The one-touch shutter system locks the door only by closing
Attention! To open the shutter, the handle 0062-H is needed!- 2D / 3D CAD data available
Configure nowStarting from∗ ： 26.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flash Handle for Large Sliding Door A-878
TAKIGEN
[Features]
· Handle for sliding door.
· Sickle lock type and rod operation type are available.
· Since it is a flat type with few protrusions, it can also be used for double sliding doors.
· The door can be opened and closed with one touch.
· Lock has small reversible key.
· For right or left opening- 2D CAD data available
Configure nowStarting from∗ ： 106.78 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Flat Snatch Lock Handle A-151R-B
TAKIGEN
[Features]
· Snatch-lock type flat handle that is resistant to vibration and impact, etc.
· Rounded soft design.
· One touch open/close.
· Dust-proof and drip-proof structure.
· To improve dust-proofing, a shutter is attached to the front of the key (standard equipment)- 2D CAD data available
Configure nowStarting from∗ ： 61.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Plastic Flat Snatch Lock Handle AP-151R-B
TAKIGEN
[Features]
· Snatch-lock type flat handle that is resistant to vibration and impact, etc.
· Rounded soft design.
· One touch open/close.
· Dust-proof and drip-proof structure.
· To improve dust-proofing, a shutter is attached to the front of the key (standard equipment)- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 38.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plastic Flat Slide Latch CP-875
TAKIGEN
Ideal for inspection port / small window. Can be opened and closed with one touch.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5.71 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Wireless Snap Lock C-10
TAKIGEN
Pull the lever to retract the latch and open the door. Close it with one touch.
It is thin and can be directly attached to the panel surface.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 6.29 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Latch for Cremone Lock C-376
TAKIGEN
[Features]
· With the tapering of the latch tip, this can be combined with a Cremone lock A-375 (sold separately) to obtain a strong sealing effect.
· 2-point tightening, 3-point tightening strong sealing is possible- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 47.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stainless Cylinder Deadlock C-1117
TAKIGEN
[Features]
· With a 12 mm diameter dead bolt, and emphasis on safety, it can be installed even after processing.
· Multiple key combinations can be obtained based on the arrangement of the special pin.
· Master system can be incorporated.
· Made of stainless steel, corrosion resistant- 2D / 3D CAD data available
Configure nowStarting from∗ ： 89.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 34.81 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 29.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stainless Steel Latch Lock C-1625-6
TAKIGEN
[Features]
· Turn the arm counterclockwise to release the latch and change the orientation of the latch.
· The length of the latch can be adjusted (10 to 20 mm). The joint of the rod can be attached by one touch with the linkage bush- 2D / 3D CAD data available
Configure nowStarting from∗ ： 52.18 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stainless Steel Rectangular Push Button Lock C-1079
TAKIGEN
[Features]
· Lock by rotating the pushbutton on the locking device by 90°- 2D / 3D CAD data available
Configure nowStarting from∗ ： 45.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stainless Steel Embedded Handle FA-1944
TAKIGEN
[Features]
· Since the pipe is embedded inside the door, it will renew the image of the van body without disfiguring the appearance.
· Made of stainless steel, corrosion resistant.
· You can open and close the door by one-touch operation of the handle.
· Ideal for medium and small doors.
· Lock has a reversible key and a dust-proof shutter.
· For both left hand and right hand use- 2D CAD data available
Configure nowStarting from∗ ： 192.80 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Double Latch C-628
TAKIGEN
[Features]
· 2 stage opening and closing will release the steam inside the oven, etc.
· Receiving can be fine-tuned- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 37.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Dual Lock C-120
TAKIGEN
[Features]
· Unlike general latch devices, rotating the handle causes latching, and even if you exceed beyond a certain point (dead point), it will certainly not come off even if pulled- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 12.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Door Latch C-852
TAKIGEN
[Features]
· Solid structure made in USA.
· It is possible to open the door from the inside with a lever.
· For right and left use- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 53.84 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Control Center with Latch C-870
TAKIGEN
[Features]
· Latch is attached to the control center, and the latch and lever operate with 60° rotation left and right (C-870-2 is 45°)- 2D / 3D CAD data available
Configure nowStarting from∗ ： 36.99 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Lavatory Lock C-874
TAKIGEN
[Features]
· This product is developed for in-vehicle toilets.
· Indicator for in-room display on the surface.
· On the inside there is an easy to operate knurled knob that can be locked in three directions- 2D CAD data available
Configure nowStarting from∗ ： 71.02 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing
Ring Latch C-44
TAKIGEN
[Features]
· Since the pull tab stops at 60°, it is ideal for large-sized doors with plurality of use.
· Panel drilling is easy- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 29.38 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Latch Lock for Rod Bar C-58
TAKIGEN
[Features]
· Since the latch head is made of Delrin resin, it closes gently- 2D / 3D CAD data available
Configure nowStarting from∗ ： 32.63 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Latch Lock for Rod C-625-5
TAKIGEN
[Features]
· Turn the arm counterclockwise to release the latch and change the orientation of the latch.
· The length of the latch can be adjusted (10 to 20 mm).
· The joint of the rod can be attached with one touch using linkage bush- Stock
- 2D CAD data available
Configure nowStarting from∗ ： 31.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Latch Lock for Plastic Wire CP-626
TAKIGEN
[Features]
· Lightweight and soft type resin latch.
· The latch stroke is not transmitted to the wire while closing the door.
· You can easily change the orientation of the latch- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 6.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
One-Touch Panel Fastener C-420
TAKIGEN
[Features]
· CP-420 made of zinc alloy (installation method is different). The interior door of a distribution board, etc., fixed with conventional screws and knurled knob can be opened and closed with one touch to save labor.
· Multiple fasteners can be used simultaneously- 3D CAD data available
Configure nowStarting from∗ ： 9.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Plastic One-Touch Panel Fastener CP-420-MD
TAKIGEN
[Features]
· The interior door of a distribution board, etc., fixed with conventional screws and knurled knob can be opened and closed with one touch to save labor.
· Quick-in type that only needs to be plugged in to install.
· Reduces labor.
· Easy locking and unlocking with a flathead screwdriver (JISC8480 compliant).
· Attached indicator makes confirmation of locking easy.
· Lever can be fixed with a sealing wire.
· Flame retardant materials (UL94V-2) used- 3D CAD data available
Configure nowStarting from∗ ： 2.98 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plastic Push Button Latch C-215
TAKIGEN
[Features]
· Pushing the push button moves the latch by 6 mm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 13.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Square Type Door Lock C-859
TAKIGEN
[Features]
· Clasp is sturdy cast iron.
· Hold at 90° by detent method.
· Superior vibration resistance.
· Left and right combination- 2D CAD data available
Configure nowStarting from∗ ： 35.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Square Latch C-168
TAKIGEN
[Features]
· 10 mm latch will operate with 50° rotation left and right.
· Ideal for one-touch doors- 2D / 3D CAD data available
Configure nowStarting from∗ ： 11.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Square Push Button Lock C-79
TAKIGEN
[Features]
· Lock by rotating the pushbutton on the locking device by 90°- 2D / 3D CAD data available
Configure nowStarting from∗ ： 21.27 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Plastic One Touch Panel Fastener with Key CP-421
TAKIGEN
[Features]
· CP-420 is a keyed type.
· Fastening tool for distribution board (JIS).
· The interior door of a distribution board, etc., fixed with conventional screws and knurled knob can be opened and closed with one touch to save labor.
· Multiple fasteners can be used simultaneously.
· Quick-in type that only needs to be plugged to install and requires little effort.
· 1 size corresponds to several kinds of plate thickness- 2D / 3D CAD data available
Configure nowStarting from∗ ： 4.40 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Large Ring Latch C-41
TAKIGEN
[Features]
· Lifting the ring moves the latch and the door opens.
· Close it with one touch- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 16.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Embedded Sealing Handle FA-815N-1
TAKIGEN
[Features]
· Since the pipe is embedded inside the door, it will renew the image of the van body.
· Select from 3 pipe diameters (ø27.2, ø21.7, ø16).
· Uses the trigger method, which makes handle operation easy and improves security.
· Even if it gets locked while working inside the cabin, the safety push rod (FC-705· 706), etc. can be used to escape.
· Lock has a reversible key and a dust-proof shutter.
· Indicator for confirmation so there is no forgetting to lock.
· Left and right combination- 2D CAD data available
Configure nowStarting from∗ ： 135.88 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Embedded Sealing Handle FA-815N-2
TAKIGEN
[Features]
· Since the pipe is embedded inside the door, it will renew the image of the van body.
· Select from 3 pipe diameters (ø27.2, ø21.7, ø16).
· Uses the trigger method, which makes handle operation easy and improves security.
· Even if it gets locked while working inside the cabin, the safety push rod (FC-705· 706), etc. can be used to escape.
· The doors for dry vans (t = 13 to 14) can have pipes inside.
· In this case, using a back cover (FA-815-2-UC) or pipe guide (FA-815-G) leaves the inside of the door refreshed.
· Lock has a reversible key and a dust-proof shutter.
· Indicator for confirmation so there is no forgetting to lock.
· Left and right combination- 2D CAD data available
Configure nowStarting from∗ ： 18.16 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Embedded Sealing Handle FA-815N-3
TAKIGEN
[Features]
· Since the pipe is installed inside the door, the appearance is clean and the image of the van body is refreshed.
· Select from 3 pipe diameters (ø27.2, ø21.7, ø16).
· Uses the trigger method, which makes handle operation easy and improves security.
· A safety push rod can be installed inside the cabinet (FC-705/FC-706) to enable escape in case someone is trapped.
· Using FA-1820-G or FA-815-G as a pipe guide inside the door keeps it neat.
· Lock has a reversible key and a dust-proof shutter.
· Indicator for confirmation so there is no forgetting to lock.
· Left and right combination- 2D CAD data available
Configure nowStarting from∗ ： 157.38 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Embedded Sealing Handle FA-818
TAKIGEN
[Features]
· Since the pipe is embedded inside the door, it will renew the image of the van body.
· Emergency escape is possible if a safety push rod is installed in the cabinet.
· Lock has a reversible key and a dust-proof shutter.
· Left and right combination- 2D CAD data available
Configure nowStarting from∗ ： 132.08 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Stainless Steel Door Latch C-1868
TAKIGEN
[Features]
· Door can be closed with one touch.
· It is all stainless steel, with excellent corrosion resistance.
· Handle attached with square bar (A-103 etc.) and wires can be remote controlled.
· For right or left use- Volume Discount
Configure nowStarting from∗ ： 106.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Small Lid FD-895
TAKIGEN
[Features]
· Flat lid with few projections.
· Packing can be easily incorporated after the latch and lock are painted- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 51.82 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
PR-CH - Flush pull handles with lever latch -Snap-in assembly technopolymer
ELESA
Flush pull handles with lever latch for snap-on assembly with handle and stator in grey-black glass fibre reinforced polyamide-based technopolymer, two keys in nickel-plated brass or polyamide-based technopolymer and right or left lock and with removable or electrical square key.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 8.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | ELESA |
| Product Series | PR-CH - Flush pull handles with lever latch -Snap-in assembly technopolymer | ||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Starting from∗ | 67.40 € *Unit price with basic configuration | 38.44 € *Unit price with basic configuration | 32.63 € *Unit price with basic configuration | 24.02 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 12.71 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 34.10 € *Unit price with basic configuration | 79.71 € *Unit price with basic configuration | 68.13 € *Unit price with basic configuration | 26.13 € *Unit price with basic configuration | 106.78 € *Unit price with basic configuration | 61.61 € *Unit price with basic configuration | 38.44 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 5.71 € *Unit price with basic configuration Volume Discount | 6.29 € *Unit price with basic configuration Volume Discount | 47.85 € *Unit price with basic configuration Volume Discount | 89.12 € *Unit price with basic configuration | 34.81 € *Unit price with basic configuration | 29.02 € *Unit price with basic configuration | 52.18 € *Unit price with basic configuration | 45.67 € *Unit price with basic configuration | 192.80 € *Unit price with basic configuration | 37.71 € *Unit price with basic configuration Volume Discount | 12.65 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 53.84 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 36.99 € *Unit price with basic configuration | 71.02 € *Unit price with basic configuration | 29.38 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 32.63 € *Unit price with basic configuration | 31.92 € *Unit price with basic configuration | 6.29 € *Unit price with basic configuration Volume Discount | 9.32 € *Unit price with basic configuration | 2.98 € Special price *Unit price with basic configuration Promotional pricing | 13.82 € *Unit price with basic configuration | 35.54 € *Unit price with basic configuration | 11.94 € *Unit price with basic configuration | 21.27 € Special price *Unit price with basic configuration Promotional pricing | 4.40 € Special price *Unit price with basic configuration Promotional pricing | 16.45 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 135.88 € *Unit price with basic configuration | 18.16 € *Unit price with basic configuration | 157.38 € *Unit price with basic configuration | 132.08 € *Unit price with basic configuration | 106.50 € *Unit price with basic configuration Volume Discount | 51.82 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 8.65 € Special price *Unit price with basic configuration Promotional pricingVolume Discount |
| Min. Shipping Days | 10 Days | 6 Days | 10 Days | Same day | Same day | 10 Days | 6 Days | 6 Days | 6 Days | 10 Days | 6 Days | Same day | Same day | Same day | 6 Days | 6 Days | 10 Days | 6 Days | 6 Days | 6 Days | 10 Days | 6 Days | Same day | Same day | 10 Days | 10 Days | Same day | 10 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | Same day | Same day | 10 Days | 10 Days | 10 Days | 10 Days | 6 Days | Same day | Same day |
| Specifications |
|
Loading...
Filter by:
Stock
-
- Show only stock items
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Locks / latches for furniture
-
- Handle Type
- Embedding Type
- Locks / latches for furniture
- Barrel Slide Bolt Latches, Slide Bar Latches, Inside Locks
- Other Latch Handles, Locks, Keys, Lock Related Components
- For Sealable Type
- Locks
- Cylinder Locks
- Auxiliary Locks
- Strike Plate
- Lock Rods and Push Bars
- Special Locks
- Cams, Clasps
- Snatch Locks, Door Catches
-
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.