Resin Hoses（Page 3）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Thailand Power Hose WR-Type
TIGERS POLYMER
Maximum allowable pressure resistance of 1.0 MPa (10.2 kgf/cm2). (φ 300 is 0.50 Mpa) It boasts superior wear resistance thanks to special materials in its inner layer.
[Features]
▪ Maximum allowable pressure 1.0 Mpa {10.2 kgf/cm2}:It has excellent pressure resistance (with outer tube caulking/inner tube expansion fittings).
・Special enter layer materials provided with excellent abrasion resistance.
▪ Its ability to be lengthened can streamline piping work.Configure nowMin. Shipping Days ： 10 Days -
Ti-Power Hose, FC-Type (Mortar Hose)
TIGERS POLYMER
With little expansion under pressurization, this hose has superior pressure-resistant performance. It has excellent abrasion resistance. Use of an inner cylinder expansion fitting smooths the inner surface, to smooth out the fluid flow.Configure nowMin. Shipping Days ： 10 Days -
Crystal Hose, Static Electricity W Type
TIGERS POLYMER
Anti-static crystal hose WT type. Hose for transporting powder and granuals
[Features]
· Excellent anti-static effect from use of antistatic mixed PVC.
･ Soft portion is transparent, allowing confirmation of contentsConfigure nowMin. Shipping Days ： 10 Days -
Crystal Hose E Type
TIGERS POLYMER
Smooth inner and outer surfaces, with grounding wire. Hose for Transporting Powder and Granules
[Features]
· Contains grounding wire, so an excellent antistatic effect is also conferred.
･ Contents can be checked since it is transparent.
· Suitable for delivery.Configure nowMin. Shipping Days ： 10 Days -
Crystal Hose WA Type
TIGERS POLYMER
Excellent heat resistance and wear resistance. Contains hard steel wire, so an antistatic effect is also conferred.
[Features]
· Features excellent heat resistance and can withstand hot air at 100°C when piping is straight.
· Contains hard steel wire, so an excellent antistatic effect is also conferred.Configure nowMin. Shipping Days ： 10 Days -
Thailand Eco-Light Electrostatic W Type
TIGERS POLYMER
[Features]
・ Excellent antistatic effect due to antistatic compound material and conductive fiber.
・ It is an environmentally friendly hose because it does not contain chlorine or plasticizer. (It can be incinerated)
・ Due to the corrugated structure, it is flexible, lightweight and easy to handle.
・ It conforms to the standards for appliances and containers and packaging based on Notification No. 201 of the Food Sanitation Act of Japan, Ministry of Health, Labour and Welfare of Japan. (Excluding fats and oils)
[Applications]
・ Transport of plastic pellets.
・ Transport of other powders and granules.
・ For food. (Excluding fats and oils)Configure nowMin. Shipping Days ： 10 Days -
Hinet Holes
TIGERS POLYMER
[Features]
・ The excellent transparency makes it easy to check the fluid.
・ The warp thread is inserted to suppress the elongation during pressurization.
・ It has excellent cold resistance, heat resistance, and chemical resistance.
[Applications]
・ For water supply and drainage of equipment.
・ For pneumatic, air conditioner piping and drainage.
・ For cleaning ships, vehicles, etc.
・ For transporting powders and liquid chemicals.
・ Sprayer.
・ For civil engineering and construction work piping.Configure nowMin. Shipping Days ： 10 Days -
Air Duct Hose
PLAS-TECH
[Features]
· Lighter than a conventional hose.
· Superior bending properties and excellent chemical resistance.
· The operating temperature ranges from -20°C - 60°CConfigure nowStarting from∗ ： 431.03 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Air Friend
PLAS-TECH
[Features]
· Superior weather resistance performance compared to rubber hoses. Usable outdoors for prolonged periods.
· Flexible with excellent operability.
· For use with air tools.
· Operating temperature: -20–60℃Configure nowStarting from∗ ： 393.75 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Eclemma Air Duct
PLAS-TECH
A special resin prevents static electricity. Prevents clogging and deposition of transported materials; suitable for applications involving precision instruments.Configure nowStarting from∗ ： 769.54 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 888.88 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Suction Hose, CT Type
PLAS-TECH
Better flexibility than the FW type. Suited to both delivery and suction use. The hose is transparent, allowing you to check the fluid contents.Configure nowStarting from∗ ： 486.02 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Techno Air
PLAS-TECH
Flexible, smooth, lightweight, and excellent in operability. More specifically, it is approximately twice as smooth as our earlier product (Technoflex).- Volume Discount
Configure nowStarting from∗ ： 112.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 150.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TECHOFLEX
PLAS-TECH
Dedicated air hose for manufacturing machinery, woodwork, and construction applications. Flexible and lightweight.
[Features]
- Dedicated air hose for manufacturing machinery, woodwork, and construction applications- Volume Discount
Configure nowStarting from∗ ： 60.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Industrial Hose MEGA Sanbre Hose
TOGAWA INDUSTRY
Increased pressure resistance. Uses a high elasticity resin. Fluid can easily be observed inside.
[Features]
· Compatible with various types of fluids such as injectable cement milk used for industrial equipment piping, various types of machinery (molding machines, printing machines, etc.), fabricating machines, excavating machines, and bridge construction.
· Lineup features excellent flexibility, transparency, pressure resistance, load resistance, and oil resistance for industrial applications.Configure nowMin. Shipping Days ： 6 Days -
Industrial Hose, Foam Hose
TOGAWA INDUSTRY
A foam material is used for the outermost layer in order to prevent surface condensation.
[Features]
· For cooling water used in printers and molding machines (to prevent condensation).
· Water droplets do not form on the surface of the hose because a foam material is usedConfigure nowStarting from∗ ： 588.56 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Industrial Use Hose, Super Air Hose
TOGAWA INDUSTRY
For use in a wide range of applications, such as factory plumbing and quarrying, etc.
[Features]
· Exceptional light workability in comparison to rubber hoses.
· Strongly UV-resistant, it suppresses cracking and splitting.Configure nowMin. Shipping Days ： 9 Days -
Industrial Hose - Super water Hose
TOGAWA INDUSTRY
[Features]
▪ Ideal for washing and water sprinkling in ships, gas stations, factories, agriculture and golf courses.
· Lightweight and excellent workability compared to rubber hoses.Configure nowStarting from∗ ： 433.14 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Industrial Hoses - Transparent Vinyl Tube
TOGAWA INDUSTRY
A wide range of sizes in the lineup, from slender to thick.- Volume Discount
Configure nowStarting from∗ ： 83.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Industrial Hose Super Tom Flex Hose
TOGAWA INDUSTRY
An easy-to-cut hose that uses resin hard wire reinforcement to withstand negative pressure.
[Features]
· Hose cuts smoothly.
· Difficult to crush.
· Inner and outer surfaces are very smooth and extremely oil resistantConfigure nowStarting from∗ ： 233.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Industrial Hose - Super Tom Fluorine Easy Hose
TOGAWA INDUSTRY
Fluorine hose with excellent chemical resistance, low elution and non-adhesive, and also with conductivity.
[Features]
▪ Super soft fluorine hose with excellent chemical resistance, low elution and non-adhesive, and also with conductivity.
▪ The conductive bands are on the outer layer, and grounding is possible simply by tightening the metal fittings (resistance value 9 × 10 Ω or less, but when overall length 15 m or less).Configure nowStarting from∗ ： 499.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hose for Agriculture and Gardening, Oil Resistant Tube
TOGAWA INDUSTRY
Hose which is optimal for secondary piping of fuel for agricultural equipment, etc.
[Features]
· Can be used for spraying agricultural chemicals or spraying water in lawns and gardens or incorporated into agricultural equipment.
· This lineup is suitable for agricultural and gardening applications, with a wide variety of colors available in addition to excellent cold resistance, mold resistance, and weather resistance.Configure nowStarting from∗ ： 55.21 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Civil Engineering, Piping, Air Conditioning Hose Gold Flex L (Lightweight Type)
TOGAWA INDUSTRY
Work in civil engineering and construction, agricultural irrigation, and plant facilities, etc. Light and flexible.Configure nowStarting from∗ ： 160.98 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Hose for Air Tools, Polyurethane Hose (TPH)
TOGAWA INDUSTRY
Perfect for air tools (air tackers, nailing machines, impact wrenches) and for painting, spraying, and in-plant air tools.- Volume Discount
Configure nowStarting from∗ ： 45.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hose for The Air Tools - Super Wynn Soft Hoses II
TOGAWA INDUSTRY
[Features]
▪ Even more supple and smooth. Solves problems such as twisting and popping up.
▪ Hose slipperyness is significantly improved for smooth moving and working.
▪ Superior water-resistance, elasticity, and air tightness makes it ideal for air tools.Configure nowStarting from∗ ： 375.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hose for Air Tools, Super Tom Sputtering Hose
TOGAWA INDUSTRY
More resistant against sparkx than conventional air hoses thanks to its spark-resistant mixture, and is effective in welding sites, automobile repair factories, etc.Configure nowStarting from∗ ： 84.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Air Tool Hoses - Suntec Air Hose
TOGAWA INDUSTRY
Air hose with coupler set is convenient and affordable. Color variations also abundant.Configure nowStarting from∗ ： 57.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hose for Air Tools Cosmetic Air Hoses
TOGAWA INDUSTRY
Surprising flexibility achieved via use of a special resin. Feels as if no hose is connected.
[Features]
· Surprisingly light weight achieved using a lightweight aluminum coupler.
· Supports many different applications including nailers, air tackers, air spray guns, etc. Professional hose that will impress those who know the difference.
· Furthermore, the lightweight coupler is made of aluminum and is not easily scratched and the connection weight is light and has excellent weight reducing properties, so operating and connecting/disconnecting properties are improved.
· Excellent coupler with a wide range of applications from air piping in factories to the connection of hoses for pneumatic tools.- Volume Discount
Configure nowStarting from∗ ： 117.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hose for Air Tools Quattro Hose (for High Pressure)
TOGAWA INDUSTRY
A high-pressure hose supporting a maximum working pressure of 4 MPa.
[Features]
· Ultra flexible. Improved slip characteristics. A high-pressure supporting a maximum working pressure of 4 MPa.
· Supporting a maximum working pressure of 4 MPa, this high-pressure specification drastically improves working speed.
· Using the manufacturer's original new formulation of special materials, the hose is snag-resistant and difficult to break.
· Slides flexibly and smoothly. Excellent flexibility.
· In comparison to conventional high-pressure hoses, the Hose Quattro provides greater flexibility with enhanced maneuverability while working.
· Using the manufacturer's original new formulation on the surface of the hose, the slide performance has been significantly improved to prevent the hose from snagging and breaking.
· In addition, a line has been added the surface of the hose so that you readily see if the hose is twisted.Configure nowStarting from∗ ： 186.38 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Hose for Air Tools Connection Coil
TOGAWA INDUSTRY
[Features]
▪ Difficult to twist and bend. Convenient air tool with spring properties.
· Coiled structure for extended working range.
· Not broken easily and excellent abrasion resistance.
▪ Since hand operation portion is straight, hand operation hose is not required.Configure nowStarting from∗ ： 39.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hose for The Air Tools - Suntec Coil
TOGAWA INDUSTRY
[Features]
· Superior flexibility, elasticity, and wear-resistant performance. Furthermore, it is very tough.
· A coiled structure for extended working range.
· Difficult to break with excellent wear resistance.
· Straight hand section—no hand hose is required. A coupler has been added for improved workability.Configure nowStarting from∗ ： 61.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Industrial Hose, Super Tom Fluorine Tube
TOGAWA INDUSTRY
This multi-purpose tube has excellent chemical resistance and low permeability against organic solvents. it is also flexible and transparent.Configure nowStarting from∗ ： 95.17 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Painting Hose / Sun Paint Tube (P)
TOGAWA INDUSTRY
Achieve good flexibility through the use of a solvent-resistant urethane resin for the outer layer. This tube is designed to improve the workability of painting processes.
[Features]
・Reduces operator workloadConfigure nowStarting from∗ ： 624.10 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Hose for Painting, Sun Paint Hose (PB-Easy)
TOGAWA INDUSTRY
Solvent resistance is dramatically improved by using the polyamide resin when compared to conventional paint hoses. Has a conduction band in the outer layer, and can be grounded simply by tightening the metal fittings.
[Features]
▪ Hoses available for high-level painting. Has a conduction band in the outer layer, and can be grounded simply by tightening the metal fitting (resistance value 9 × 10 Ω or less, but only when overall length 15 m or less).Configure nowStarting from∗ ： 789.98 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Hose for Painting, Sun Paint Hose (FUB-Easy)
TOGAWA INDUSTRY
Uses fluorine resin in a liquid contact layer, providing strength even against water solubility.
[Features]
· Definitive hose for manual paint application. Because the inner surface roughness of the fluorine resin on the inner surface is excellent, the setup time needed to change colors is reduced.
· A conductive band is present on the outer layer and grounding can be performed by simply tightening the metal fittings (resistance value: 9 × 10 Ω, but only when length is 15 m or less)Configure nowStarting from∗ ： 1,529.57 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Paint Hoses - Conductive Air Hose
TOGAWA INDUSTRY
[Features]
▪ A conductive material is used in the inner layer, and just by connecting with metal fittings it is complete.
▪ Bare grounding wire is not required, increasing work efficiency.
▪ Reliable grounding is possible.Configure nowStarting from∗ ： 1,238.35 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 314.41 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
TAC Heran Transparent
TOTAKU INDUSTRIES
The abrasion resistance performance is approximately 4 times that of TAC HERAN-N. A superior antistatic effect is achieved by the introduction a ground wire. Liquids are transported smoothly due to the extremely smooth inner surface. The transparent duct enables checking of the material being transported.
[Features]
· This product has 4 times the abrasion resistance of TAC HERAN-N (based on for initial value of 1 for TAC HERAN-N in the abrasion amount comparison test—eight hours after starting).
· The duct hose is transparent, which enables visually checking inside the duct.
· Superior anti-static effect due to the inclusion of a ground wire.
· Liquids are transported smoothly due to the extremely smooth inner surface.Configure nowMin. Shipping Days ： 11 Days -
Line Power AT
TOTAKU INDUSTRIES
Excellent pressure resistance, with a pressure tolerance of 1.00 MPA. The structure does not stretch when compressed. Uses abrasion-resistant rubber for the inner layer, offering excellent abrasion resistance. Stands up to external pressure and deforms little.Configure nowMin. Shipping Days ： 11 Days -
KY Tubes
HAKKO
Non-PVC eco-tubes. General-purpose chemical/oil resistant tubes for food processing.
[Features]
- The long-awaited tube-type is now part of the KY San Foods product lineup. They are known for their food and chemical-resistant hoses.
- A new type of tube for food and industrial use developed to be compatible with non-PVCs and various oils/fats.
- Made from a non-oil material that does not include eluate-causing plasticizers, cutting out the resin smell as well.
- Eco-friendly and suppresses harmful gases even when incinerated.
- Inner layers made from an olefin-based resin with superior chemical resistance.Configure nowMin. Shipping Days ： 9 Days -
KY Coil
HAKKO
Non-PVC environmentally friendly hose. General-use hose for food; chemical- and oil-resistant. Does not collapse readily and is compatible with vacuums (suction). Because a resin coil is used, cutting is easy, and workability and safety are excellent.
[Features]
· A new type of hose that is entirely vinyl chloride free, which also does not use vinyl chloride in its reinforcing coil.
· Does not collapse readily, features excellent shape retention, and can also be used with a vacuum (suction).
· All resin hose design means cutting can be easily performed and workability and safety are excellent.Configure nowMin. Shipping Days ： 9 Days -
Protective Spring, Light
HAKKO
An accessory for preventing hose bending and crushing. Can be attached to locations on hoses that require reinforcement.
[Features]
· Prevents hose bending and crushing.
· Simply attaching it to a hose prevents bending, providing reliability and safety.
· A flat handle is attached to one side of the spring.
· Made entirely of rust resistant stainless steel.
· Prevents hose bending and crushing.
· Enables protection of only parts that must not be crushed.
· The life of the hose is lengthened if the hose is not bent.- Volume Discount
Configure nowStarting from∗ ： 20.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 10 Days -
Configure now
Min. Shipping Days ： 10 Days
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Applicable Fluid / Usage |
| Cutting Service Usage |
| Nominal I.D. d |
| O.D. D(mm) |
| Properties |
| Hose Material |
| Mounting Metal Fittings |
| Color |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | PLAS-TECH | PLAS-TECH | PLAS-TECH | PLAS-TECH | PLAS-TECH | PLAS-TECH | PLAS-TECH | PLAS-TECH | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOGAWA INDUSTRY | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | HAKKO | HAKKO | HAKKO | KURARAYPLASTICS | KURARAYPLASTICS |
| Product Series | Civil Engineering, Piping, Air Conditioning Hose Gold Flex L (Lightweight Type) | ||||||||||||||||||||||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | - | - | - | - | - | - | - | 431.03 € *Unit price with basic configuration | 393.75 € *Unit price with basic configuration | 769.54 € *Unit price with basic configuration | 888.88 € *Unit price with basic configuration | 486.02 € *Unit price with basic configuration | 112.56 € *Unit price with basic configuration | 150.70 € *Unit price with basic configuration | 60.97 € *Unit price with basic configuration Volume Discount | - | 588.56 € *Unit price with basic configuration | - | 433.14 € *Unit price with basic configuration | 83.15 € *Unit price with basic configuration Volume Discount | 233.04 € *Unit price with basic configuration | 499.51 € *Unit price with basic configuration | 55.21 € *Unit price with basic configuration | 160.98 € *Unit price with basic configuration | 45.19 € *Unit price with basic configuration Volume Discount | 375.02 € *Unit price with basic configuration | 84.62 € *Unit price with basic configuration | 57.13 € *Unit price with basic configuration | 117.72 € *Unit price with basic configuration Volume Discount | 186.38 € *Unit price with basic configuration | 39.17 € *Unit price with basic configuration | 61.00 € *Unit price with basic configuration | 95.17 € *Unit price with basic configuration | 624.10 € *Unit price with basic configuration | 789.98 € *Unit price with basic configuration | 1,529.57 € *Unit price with basic configuration | 1,238.35 € *Unit price with basic configuration | 314.41 € *Unit price with basic configuration | - | - | - | - | 20.06 € *Unit price with basic configuration Volume Discount | - | - |
| Min. Shipping Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 9 Days | 9 Days | 9 Days | 9 Days | 9 Days | 6 Days | 6 Days | 6 Days | 6 Days | 9 Days | 9 Days | 9 Days | 6 Days | 6 Days | 6 Days | 9 Days | 9 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 9 Days | 6 Days | 6 Days | 9 Days | 9 Days | 9 Days | 9 Days | 9 Days | 9 Days | 11 Days | 11 Days | 9 Days | 9 Days | 6 Days | 10 Days | 10 Days |
| Applicable Fluid / Usage | Water | Cement | Powder | Powder | Powder / Special factory requirements | Powder / Special factory requirements | Water / Chemical / Powder / Air | Powder / Air | Air | Powder / Air | Water / Chemical / Powder / Special factory requirements | Water / Chemical / Powder | Air | Water / Chemical / Air / Special factory requirements | Air | Water / Oil (Mineral Oil) | Water | Air | Water | Water / Air | Water / Oil (Mineral Oil) | Chemical / Special factory requirements / Ink, Paint | Oil (Mineral Oil) | Water / Powder | Air | Air | Air | Air | Air | Air | Air | Air | Chemical / Special factory requirements / Ink, Paint | Ink, Paint | Ink, Paint | Ink, Paint | Air | Water / Chemical / Special factory requirements | Powder / Cement / Grains | Water / Powder / Cement / Grains | - | - | - | Water / Chemical / Powder / Grains | Water |
| Cutting Service Usage | Yes | Yes | Yes | Yes | Yes | Yes | Yes | No | No | No | No | No | No | No | No | Yes | No | Yes | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | Yes | Yes | - | - | - | No | No |
| Nominal I.D. d | 38 ～ 200 | 50 | 25 ～ 75 | 50 | 38 ～ 200 | 25 ～ 75 | 4 ～ 50 | 38.1 ～ 127 | 6.5 ～ 12.7 | 50.8 ～ 101.6 | 38.1 | 38.1 | 6.5 ～ 8.5 | 4 ～ 50 | 6.5 ～ 8.5 | 4 ～ 100 | 12 ～ 19 | 6 ～ 25 | 12 ～ 38 | 3 ～ 90 | 9 ～ 25 | 9 ～ 19 | 3 ～ 12 | 25 ～ 75 | 6.5 ～ 11 | 6.5 ～ 11 | 6.5 ～ 8.5 | 7 | 6.5 | 6 | 5 ～ 8 | 5 | 4 ～ 8 | 7 | 7 | 7 | 8 | 12 ～ 50 | 38 ～ 200 | 50 ～ 100 | - | - | - | 25 ～ 250 | 25 ～ 150 |
| O.D. D(mm) | 52.3 ～ 245 | 65 | 31.8 ～ 90 | 61 | 48 ～ 230 | 33 ～ 91 | 9 ～ 62 | 46.5 ～ 137.9 | 13 ～ 21.5 | 60.9 ～ 112.3 | 45.5 | 45.5 | 10 ～ 12.5 | 9 ～ 62 | 10 ～ 12.5 | 9 ～ 118 | 24 ～ 32 | 13 ～ 34.5 | 19 ～ 50 | 5 ～ 104 | 15 ～ 33 | 15 ～ 26 | 6 ～ 16 | 29.9 ～ 84.8 | 10 ～ 16 | 10 ～ 16 | 10 ～ 12.5 | 10 | 10 | 10 | 8 ～ 12 | 8 | 6 ～ 12 | 10 | 10 | 10 | 12.5 | 18 ～ 62 | 48.5 ～ 226.4 | 69.5 ～ 129 | - | - | - | 31 ～ 286 | 33 ～ 180.5 |
| Properties | Abrasion Resistance / Pressure Resistance | Abrasion Resistance / Pressure Resistance | Antistatic Performance / Transparency | Antistatic Performance / Transparency | Antistatic Performance / Abrasion Resistance / Heat Resistance | Antistatic Performance / Flexibility | Heat Resistance / Low Temp. Resistance / Chemical Resistance / Transparency | Flexibility | Weather Resistance / Flexibility | Antistatic Performance | Antistatic Performance / Transparency / Vacuum | Vacuum | Standard / Flexibility | Standard / Pressure Resistance / Transparency / Flexibility / Vacuum | Standard / Flexibility | Pressure Resistance / Oil Resistance / Transparency / Flexibility / Shape Retention | Pressure Resistance / Oil Resistance / Flexibility / Condensation Prevention / Shape Retention | Pressure Resistance / Oil Resistance / Flexibility / Shape Retention | Pressure Resistance / Oil Resistance / Flexibility / Shape Retention | Transparency / Flexibility | Pressure Resistance / Oil Resistance / Transparency / Flexibility / Shape Retention / Vacuum | Antistatic Performance / Pressure Resistance / Oil Resistance / Chemical Resistance / Transparency / Flexibility / Shape Retention | Oil Resistance / Flexibility | Weather Resistance / Pressure Resistance / Oil Resistance / Transparency / Flexibility / Shape Retention | Pressure Resistance / Flexibility | Pressure Resistance / Flexibility | Pressure Resistance / Flexibility | Pressure Resistance / Flexibility | Pressure Resistance / Flexibility | Pressure Resistance / Flexibility | Flexibility | Flexibility | Oil Resistance / Chemical Resistance / Transparency / Flexibility | Pressure Resistance / Transparency / Flexibility | Antistatic Performance / Pressure Resistance / Transparency / Flexibility | Antistatic Performance / Pressure Resistance / Transparency / Flexibility | Antistatic Performance / Pressure Resistance / Flexibility | Oil Resistance / Chemical Resistance / Flexibility / Shape Retention | Antistatic Performance / Abrasion Resistance / Transparency | Abrasion Resistance / Pressure Resistance / Shape Retention | - | - | - | Chemical Resistance / Transparency | Standard |
| Hose Material | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Ethylene Propylene Rubber | Elastomer | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Fluororesin | Vinyl Chloride | Vinyl Chloride | Polyurethane | Elastomer | Elastomer | Polyurethane | Elastomer | Elastomer | Polyurethane | Polyurethane | Fluororesin | Polyurethane | Polyurethane | Fluororesin | Polyurethane | Olefinic Resin | Polyurethane | Others | - | - | - | Vinyl Chloride | Vinyl Chloride |
| Mounting Metal Fittings | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Both Sides | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Both Sides | Not Provided / Both Sides | Both Sides | Both Sides | Both Sides | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | Not Provided | Not Provided |
| Color | Orange | Gray | Transparent (including non-white colors) | Transparent (including non-white colors) | Black | White | Transparent (including non-white colors) | Gray | Blue | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Red / Green | Transparent (including non-white colors) | Orange | Transparent (including non-white colors) | Black | Blue / Black | Green | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Pink | Transparent (including non-white colors) | Red / Orange | Green | Black | Orange | Red | Pink | Yellowish Opaque White | Blue | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Green | Transparent (including non-white colors) | Transparent (including non-white colors) | Orange | - | - | - | Transparent (including non-white colors) | Transparent (including non-white colors) |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Applicable Fluid / Usage
-
Cutting Service Usage
- Yes
- No
-
Nominal I.D. d
-
O.D. D(mm)
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 10.5
- 10.6
- 11
- 11.7
- 11.7/11.7
- 12
- 12.3
- 12.5
- 13
- 13.5
- 14
- 14.3
- 14.5
- 14.5/16.0
- 15
- 16
- 16.5
- 17
- 18
- 19
- 19.5
- 20
- 20.1
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 24
- 24.1
- 24.2
- 24.4
- 24.5
- 24.7
- 25
- 25.6
- 26
- 27
- 27.5
- 28
- 28.2
- 28.5
- 29
- 29.9
- 30
- 30.4
- 30.8
- 30.9
- 31
- 31.2
- 31.5
- 31.6
- 31.8
- 32
- 32.6
- 32.9
- 33
- 33.4
- 33.5
- 33.7
- 33.8
- 34
- 34.2
- 34.4
- 34.5
- 34.9
- 35.5
- 35.6
- 36
- 36.5
- 36.7
- 37
- 37.4
- 37.6
- 38
- 38.2
- 39
- 39.2
- 39.3
- 39.8
- 40
- 40.2
- 40.5
- 40.8
- 41
- 41.5
- 41.6
- 41.8
- 42
- 42.5
- 43
- 43.2
- 43.5
- 43.8
- 43.9
- 44
- 44.4
- 44.6
- 45.5
- 45.8
- 46
- 46.2
- 46.4
- 46.5
- 46.6
- 47.0
- 47.2
- 47.5
- 47.6
- 47.8
- 48
- 48.4
- 48.5
- 48.7
- 48.8
- 49.5
- 50
- 50.1
- 50.5
- 50.7
- 51
- 52
- 52.3
- 53
- 55
- 56
- 57.0
- 57.5
- 58
- 58.2
- 58.5
- 58.6
- 59.5
- 59.7
- 59.8
- 60
- 60.2
- 60.5
- 60.9
- 61
- 61.4
- 61.6
- 62
- 62.6
- 62.8
- 63
- 63.4
- 63.5
- 64.5
- 65
- 65.2
- 66.0
- 66.8
- 68
- 69.3
- 69.5
- 69.7
- 71.0
- 71.5
- 72
- 72.1
- 72.2
- 72.4
- 72.6
- 73
- 73.6
- 73.9
- 74
- 74.1
- 74.6
- 74.8
- 75
- 75.1
- 76.0
- 76.5
- 76.8
- 77
- 78
- 78.5
- 78.9
- 80
- 80.5
- 81.5
- 84
- 84.8
- 85.1
- 86
- 86.3
- 86.6
- 87.0
- 87.5
- 87.6
- 88.0
- 88.8
- 89
- 89.1
- 89.6
- 89.8
- 90
- 90.2
- 90.8
- 91
- 91.4
- 92
- 93.3
- 95.5
- 99.1
- 99.5
- 99.7
- 100.5
- 101
- 102.0
- 102.8
- 104
- 104.2
- 104.3
- 105.2
- 106.0
- 107
- 108
- 111.6
- 112.0
- 112.3
- 112.6
- 113
- 115
- 115.2
- 115.8
- 117
- 117.2
- 117.6
- 118
- 118.4
- 118.6
- 119
- 119.5
- 120
- 120.5
- 128
- 129
- 131.8
- 137.9
- 139.5
- 140
- 140.6
- 141.6
- 143
- 143.6
- 144.8
- 146.8
- 148
- 151
- 152
- 152.2
- 152.5
- 159.5
- 167.5
- 168.0
- 169.4
- 169.8
- 171.0
- 172.0
- 173
- 173.6
- 174.7
- 180
- 180.5
- 183.5
- 184.5
- 197.8
- 221.5
- 223.4
- 223.8
- 226.4
- 226.5
- 229.7
- 230
- 233.5
- 235
- 237
- 238.0
- 245
- 274
- 286.0
- 295.0
- 328.5
- 347.0
-
Properties
- Standard
- Antistatic Performance
- Abrasion Resistance
- Weather Resistance
- Pressure Resistance
- Heat Resistance
- Low Temp. Resistance
- Oil Resistance
- Chemical Resistance
- Low Release
- Non-adhesive
- Transparency
- Flexibility
- Low Odor
- Condensation Prevention
- Shape Retention
- High Strength
- Vacuum
- Bending Property
- Other Properties
-
Hose Material
-
Mounting Metal Fittings
-
Not Provided
-
One Side
-
Both Sides
-
Not Provided
-
Color
Brand
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Resin Hoses
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.