Rod End Bearings, Spherical Bearings（Page 2）

?* Information on days to ship and prices

• • Promotional pricing ends 31/12/2024

  

  Stainless Steel- Angled ball joints

  GANTER

  Stainless Steel-Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
  The angle of rotation for the type with safety catch (Type CSN) is 15°, without safety catch (Type CN) is 18°.
  For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
  To protect the angled ball point, a dust cap GN 710 can be added.
  The hexagon nut is part of the angled ball joints.
  Dust caps GN 710 have to be ordered seperately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Igubal rod end bearing oil free type (male screw) KAL(R)M

  IGUS

  Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight KAR(L)M

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.62 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Igubal rod end bearing oil free type (angle joint) WGRM

  IGUS

  Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight WGRM

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.44 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  Axial joints similar to DIN 71802 (K0715)

  KIPP

  [Specifications]
  ・Main Body Material: Steel, Stainless Steel
  ・Thread M: M5-M10
  ・Standard: DIN 71802
  
  [Features]
  ・For transmitting movement processes
  ・Application sectors: machine and vehicle construction,material handling
  ・Temperature range: -30℃to+110℃
  ・Stainless steel version: protected against dust and dirt

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Axial Spherical Plain Bearing, Maintenance-Free, Open Design

  INA

  Axial spherical plain bearing, maintenance-free, DIN ISO 12240-3, shaft location washer curved surface with hard chromium coating, open design

  Select to compare

  Configure now
  Starting from∗ ：	32.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod End

  INA

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	88.51 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Igubal spherical bearing oil free type EGLM

  IGUS

  Easy to install and press fit. Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight EGLM

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod ends GIKR..-PW, with internal thread, maintenance-free, to DIN ISO 12 240-4, right hand thread

  INA

  [Specifications]
  ・I.D. D(mm): 6-30
  ・Outer Diameter(mm): 20-70
  ・Width(mm): 9-37
  ・DIN ISO 12 240-4
  ・GIKR..-PW
  ・Maintenance-free

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.15 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Rod Ends, DIN 12240-4, with female thread

  HALDER

  Rod ends are suitable for universal use in applications subject to dynamic loads. As well as use in corrosion-risk areas, the design in stainless steel can also be used under higher dynamic loads.
  Rod ends are used for bearings where movements between shaft and housing are necessary, and where the movements are not in a straight line.
  Rod ends are ready-to-install elements manufactured to DIN ISO 12240-4 (dimension series K). The PTFE fabric inserted into the bearing shell means that the rod ends are maintenance-free.

  Select to compare

  Configure now
  Starting from∗ ：	9.17 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Rod-end eyes (K0127)

  KIPP

  [Specifications]
  ・Main Body Material: Stainless Steel, Steel
  
  [Features]
  ・With internal thread M3.5-M10

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.51 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Radial Spherical Plain Bearing, Maintenance-Free, PTFE-Film Sliding Layer, Open Design

  INA

  Radial spherical plain bearing, maintenance-free, sliding layer: PTFE film, brass outer ring, DIN ISO 12240-1, dimension series K, open design

  Select to compare

  Configure now
  Starting from∗ ：	6.55 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod-end eyes (27618)

  NORELEM

  · Steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	1.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spherical Bearings Series E, Stainless Steel, Maintenance-free

  MAEDLER

  Material stainless: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished. Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.
  • DIN ISO 12240-1 (DIN 648), series E (slim shape).
  • Maintenance-free.
  • Suitable for high unidirectional load.
  • Sliding speed up to 10 m/min.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.72 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Rod End Bearing, Standard Type, Oil Free Type, Female Thread (Fluoropolymer PTFE) - [NTLHS]

  STRUENING

  A standard oil free female threaded type rod end bearing. SB is a Taiwanese manufacturer that was established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.51 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Joint pieces, Stainless Steel

  GANTER

  Stainless Steel-Joints pieces GN 752 are designed to be used in combination with St. Steel-Fork heads DIN 71752 respectively Stainless Steel-Fork joints GN 751.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Radial spherical plain bearings GE..-FO-2RS, requiring maintenance, to DIN ISO 12 240-1, lip seals on both sides

  INA

  [Specifications]
  ・I.D. D(mm): 20~110
  ・Allowable Tilt Angle α(deg): 12~17
  ・Outer Diameter(mm): 42~180
  ・Width(mm): 25~100
  ・DIN ISO 12 240-1

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Radial spherical plain bearings GE..-UK-2TS, maintenance-free, DIN ISO 12 240-1, sealing with 3 lips made of PTFE / steel reinforcement on both sides

  INA

  [Specifications]
  ・I.D. D(mm): 30~300
  ・Allowable Tilt Angle α(deg): 6, 7
  ・Outer Diameter(mm): 47~430
  ・Width(mm): 22~165
  ・DIN ISO 12 240-1

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	65.50 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends GAR..-DO, with external thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread

  INA

  [Specifications]
  ・I.D. D(mm): 6-30
  ・Outer Diameter(mm): 21-73
  ・Width(mm): 6-22
  ・DIN ISO 12 240-4
  ・GAR..-DO
  ・Requiring maintenance

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.38 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Rod ends ESA Series

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	141.90 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  ELGES Rod End Bearings, Spherical Bearings / Male thread, Female thread, Welding end, Threaded clamping device

  ELGES

  [Specifications]
  ・I.D. D(mm): 15~110
  ・Connection screw direction: Right Screw, Left Screw
  ・Outer diameter(mm): 30~180
  ・Width(mm): 14~115
  ・Thread type: Male thread, Female thread, Welding end, Threaded clamping device

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  ELGES Maintenance-Free Radial Spherical Plain Bearing Steel / PTFE, Opening, Dimension Series K

  ELGES

  Select to compare

  Configure now
  Starting from∗ ：	12.51 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Joint Head

  SKF

  [Specifications]
  ・I.D. D(mm): 3~100
  ・Outer diameter(mm): 12~230
  ・Width(mm): 6~100

  Select to compare

  Configure now
  Starting from∗ ：	11.95 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Spherical bearings K/E series DIN ISO 12240-1 (K1324)

  KIPP

  [Specifications]
  ・Main Body Material: Stainless Steel
  ・Standard: DIN ISO 12240-1
  
  [Features]
  ・Suitable for use under high pressure
  ・Maintenance-free
  ・Durable
  ・Low friction

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Radial Spherical Plain Bearing, Maintenance-Free, ELGOGLIDE Sliding Layer, Sealed Design

  INA

  Radial spherical plain bearing, maintenance-free, sliding layer: ELGOGLIDE, inner ring curved surface with hard chromium coating, DIN ISO 12240-1, dimension series G, sealed

  Select to compare

  Configure now
  Starting from∗ ：	67.83 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spherical Plain Bearing SB

  THK

  The most widely used series in Japan. It is used for heavy loads since the spherical contact area has a large width.
  The outer ring is split at two points to accommodate the inner ring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Universal (Metal Rod End Fitting) Ball Joint

  AIRTAC

  Universal (metal rod end fitting) ball joint manufactured by AirTAC, a company highly rated for its low prices and high quality.· Lubricated type universal ball joint

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Rod End Bearing, Standard Type, Female Thread (Copper Alloy) [PTLHS]

  STRUENING

  A standard female threaded type rod end bearing. SB is a Taiwanese manufacturer that was established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Lubricated Type Spherical Plain Bearing

  CCVI

  ● This self-aligning type bearing has inner and outer rings with spherical sliding surfaces, so it can bear a large radial load and bi-directional axial load at the same time.
  ● The surfaces of the inner and outer rings are phosphate-treated and its sliding surfaces are coated with MoS2, making it ideal for low torque applications. This bearing offers excellent abrasion resistance and is mostly used in industrial machinery and construction machinery.
  ● Construction machinery parts
  ● Hydraulic cylinder parts
  ● Agricultural machinery parts
  ● Robot parts
  ● Transport equipment parts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.00 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Angular contact spherical plain bearings GE..-SW, maintenance-free, to DIN ISO 12 240-2

  INA

  [Specifications]
  ・I.D. D(mm): 25~120
  ・Allowable Tilt Angle α(deg): 1.1~2.7
  ・Outer Diameter(mm): 47~180
  ・Width(mm): 14~36
  ・DIN ISO 12 240-2

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	56.77 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Axial spherical plain bearings GE..-AW, maintenance-free, to DIN ISO 12 240-3

  INA

  [Specifications]
  ・I.D. D(mm): 17~140
  ・Allowable Tilt Angle α(deg): 5, 6, 7
  ・Outer Diameter(mm): 47~260
  ・Width(mm): 11.5~42
  ・DIN ISO 12 240-3

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	119.89 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Rod ends GIKPR..-PW, with internal thread, rmaintenance-free, fine pitch internal thread, to DIN ISO 12 240-4, right hand thread

  INA

  [Specifications]
  ・I.D. D(mm): 10, 12, 16
  ・Outer Diameter(mm): 28, 32, 42
  ・Width(mm): 14, 16, 21
  ・DIN ISO 12 240-4
  ・GIKPR..-PW
  ・Maintenance-free

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.95 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Rod End Bearings, Spherical Bearings DO Series

  ZEN

  Select to compare

  Configure now
  Starting from∗ ：	9.38 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  ELGES Hydraulic Rod End Requiring Maintenance with Thread Clamping, Din 24338 / ISO 6982, Open

  ELGES

  Select to compare

  Configure now
  Starting from∗ ：	76.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Radial Spherical Plain Bearings Requiring Maintenance, Steel / Steel, Dimension Series G

  ELGES

  Select to compare

  Configure now
  Starting from∗ ：	26.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Maintenance-Free Radial Spherical Bearing Hard Chrome / PTFE, Opening, Dimension Series E

  ELGES

  Select to compare

  Configure now
  Starting from∗ ：	12.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Radial Spherical Plain Bearing Requiring Maintenance with Cylindrical Extensions on The Inner Ring, Steel / Steel, Sealed

  ELGES

  Select to compare

  Configure now
  Starting from∗ ：	31.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ball seats for angle joints DIN 71805 Form B (K0712)

  KIPP

  [Specifications]
  ・Main Body Material: Steel
  ・Standard: DIN 71805
  ・Surface finish body: galvanised and passivated
  ・Form: B
  ・A(mm): 18-45
  
  [Features]
  ・Spare part for DIN 71802 ball joints

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing external thread, stainless steel, DIN ISO 12240-4 (K0720)

  KIPP

  [Specifications]
  ・Main Body Material: Stainless Steel
  ・Connection screw M: M5-M22
  ・Standard: DIN ISO 12240-4
  
  [Features]
  ・Bearing ball, hardened
  ・Plain bearing,maintenance-free
  ・Version: right or left-hand thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Standard-Performance Radial Spherical Plain Bearing, Requiring Maintenance, Steel/Steel Sliding Contact Surface, Open Design

  INA

  Standard performance Radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-1, dimension series E, open design

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Standard-Performance Radial Spherical Plain Bearing, Requiring Maintenance, Steel/Steel Sliding Contact Surface, Sealed Design

  INA

  Standard performance Radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-1, dimension series E, sealed

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.28 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Radial Spherical Plain Bearing, Maintenance-Free, PTFE-Composite Sliding Layer, Open Design

  INA

  Radial spherical plain bearing, maintenance-free, sliding layer: PTFE composite, inner ring curved surface with hard chromium coating, DIN ISO 12240-1, dimension series G, open design

  Select to compare

  Configure now
  Starting from∗ ：	14.91 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball joints DIN 71802 Form C (27650)

  NORELEM

  · Enables transmission and redirection of forces
  
  · Application sectors: machine and vehicle construction, material handling
  
  · Steel or stainless steel
  
  · Version: right or left-hand thread

  Select to compare

  Configure now
  Starting from∗ ：	1.88 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Angle Joints DIN 71802, Zinc-plated, with Mounted Sealing Cap

  MAEDLER

  Material: Steel zinc-plated. Ball stud hardened.
  With mounted sealing cap from neopren, black.
  Form C: With threaded bolt and hexagon nut.
  Form CS: With threaded bolt, hexagon nut and circlip.
  Right = Right-hand thread in the socket.
  Left = Left-hand thread in the socket.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.39 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Igubal® rod end bearing, male thread, EARM and EALM

  IGUS

  igubal® rod ends can also be used in rough environments. They are corrosion-resistant in humid environments and resistant to weak acids and bases. Depending on the version (HT) the operation temperature is from –30 °C up to +80 °C. Rod ends are also resistant to dirt and dust. Furthermore they are also available for high temperatures ("HT"-from -40°C bis +200°C) and as detectable version ("DT).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.74 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  Rod End Bearing, Right Male Thread, Fluoropolymer Type 2 Piece RBT-E

  MINEBEA

  The rod end requires no lubrication, and is made of stainless steel (303 for the body, 440C for the ball),
  giving it excellent anti-corrosion characteristics so it can be used in a wide range of general purpose applications.
  
  [Features]
  · The fluoropolymer liner is bonded to the inner diameter of the body.
  · The moving load should be kept within the rated static load since the load performance of the fluoropolymer liner is larger than the static fracture load of the body.
  · If exposed to shock and vibration, damage is possible even if the load is kept under the rated load. Internal diameter sizes 15 mm and above are built-to-order.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.77 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...