Vacuum Generators, Vacuum Ejectors（Additional Function：Valves For Vacuum Generation）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 31/12/2024
Single Unit Type, Type A Union Straight for Granular / Powder Body Transport
NIHON PISCO
Transports small indefinite shaped working material such as granules, powder and fiber.
[Features]
· Transports small indefinite shaped working material such as granules, powder and fiber.
· A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
· Allows model selection by size and weight of working material.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 54.78 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
ZK2, Vacuum Unit, Ejector System with Valve
SMC
A vacuum unit ejector system manufactured by SMC
[Features]
· Built-in digital pressure switch for vacuums, with energy-saving function. Cuts the air supply upon reaching vacuum: Leading to 90% reduction in air consumption
· Has a 2-stage ejector structure that increases suction flow rate by 50% and reduces air consumption by 30% (compared to SMC's single-stage ejectors)
· Compact and lightweight, with a 28% reduction in volume (88 cm3) and a 59% reduction in weight (81 g) compared to conventional products
· Reduced wiring for single units as well as manifolding.
· Once the supply valve is switched ON, the vacuum generation state is maintained even if the power is cut off. This reduces power consumption.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 194.00 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Vacuum Ejectors - Horizontal Unit System
MISUMI
Vacuum generator with built-in electromagnetic value enables compact wiring. Controls over the pressure of vacuum release air (air used for release vacuum condition) to prevent a workpiece from being blown off.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 186.76 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Vacuum Generator with Pressure Sensor VQ Series
NIHON PISCO
*The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
[Features]
Combination type vacuum generator, optimal for controlling large flow rates.
Pressure sensor specification (30‑mm wide, dual-output, NPN open collector output pressure sensor)- 2D / 3D CAD data available
Configure nowStarting from∗ ： 267.15 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Vacuum Ejector With Valve And Switch ZM Series
SMC
An ejector manufactured by SMC.
[Features]
· All-in-one.
· Capable of manifolding.
· Maximum suction flow rate increased by 40%.
· Maximum vacuum pressure -84 kPa.
· Compact and lightweight.
· Air-operated type.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 152.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Large Vacuum Unit, Ejector System, ZR Series
SMC
A vacuum unit ejector system manufactured by SMC.
[Features]
· Large suction flow rate, suitable when used with large-sized pads or multiple pads.
· Nozzle diameters: ø1.0, ø1.3, ø1.5, ø1.8, ø2.0
· Vacuum unit suitable for workpieces of 0.5 to 5 kg.
· Modular design makes it possible to combine functions as required.
· Safe due to vacuum self-holding function by means of double solenoid valves.
· Compact and lightweight.
· Capable of manifolding.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 277.47 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Vacuum Unit, Vacuum Pump System, ZK Series
SMC
Vacuum unit and vacuum pump system capable of manifolding.
[Features]
· Ideal for electronic components and small precision components weighing up to 100 g.
· Modular design makes it possible to combine the most suitable functions.
· Compact and lightweight (120 g with complete set), which makes it ideal for installing actuators.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 177.40 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Single Unit Type, Type A Straight for Granular / Powder Body Transport
NIHON PISCO
*The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
[Features]
· Transports small indefinite shaped working material such as granules, powder and fiber.
· A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
· Allows model selection by size and weight of working material.
· Transports small indefinite shaped working material such as granules, powder and fiber.- 3D CAD data available
Configure nowStarting from∗ ： 56.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Single Unit Type, Straight Type B for Granular / Powder Body Transport
NIHON PISCO
Transports small indefinite shaped working material such as granules, powder and fiber.
[Features]
· Transports small indefinite shaped working material such as granules, powder and fiber.
· A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
· Allows model selection by size and weight of working material.- 3D CAD data available
Configure nowStarting from∗ ： 56.82 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Single Unit Type, Type C Straight for Granular / Powder Body Transport
NIHON PISCO
*The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
[Features]
· Transports small indefinite shaped working material such as granules, powder and fiber.
· A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
· Allows model selection by size and weight of working material.
· Transports small indefinite shaped working material such as granules, powder and fiber.- 3D CAD data available
Configure nowStarting from∗ ： 61.44 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Single Unit Type, Type D Straight for Granular / Powder Body Transport
NIHON PISCO
Transports small indefinite shaped working material such as granules, powder and fiber. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
[Features]
· Transports small indefinite shaped working material such as granules, powder and fiber.
· A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
· Allows model selection by size and weight of working material.- 3D CAD data available
Configure nowStarting from∗ ： 61.55 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Single Unit Type, Type A Nipple for Granular / Powder Body Transport
NIHON PISCO
Transports small indefinite shaped working material such as granules, powder and fiber. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
[Features]
· Transports small indefinite shaped working material such as granules, powder and fiber.
· A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
· Allows model selection by size and weight of working material.- 3D CAD data available
Configure nowStarting from∗ ： 55.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Single Unit Type, Type B Nipple for Granular / Powder Body Transport
NIHON PISCO
Transports small indefinite shaped working material such as granules, powder and fiber. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
[Features]
· Transports small indefinite shaped working material such as granules, powder and fiber.
· A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
· Allows model selection by size and weight of working material.- 3D CAD data available
Configure nowStarting from∗ ： 60.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Single Unit Type, Type B Union Straight for Granular / Powder Body Transport
NIHON PISCO
*The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
[Features]
· Transports small indefinite shaped working material such as granules, powder and fiber.
· A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
· Allows model selection by size and weight of working material.
· Transports small indefinite shaped working material such as granules, powder and fiber.- 3D CAD data available
Configure nowStarting from∗ ： 62.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Vacuum Generator VG, Built-In Vacuum Switch, Supply and Break Valve, Filter and Cable Side Route
NIHON PISCO
Makes a unit of a vacuum switch, vacuum break valve, etc. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
[Features]
· Makes a unit of a vacuum switch, vacuum break valve, etc., and allows selection of a type suited to the purpose.
· Makes available 3 types, with a former analog output added to the vacuum switch output specification, a 2‑point switch output, and an inexpensive analog output alone.Configure nowStarting from∗ ： 254.47 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Vacuum Generator for Process Gas Ventilation VG Series
CKD
-Consumption of supply fluid can be greatly reduced. - The product is resistant to pressure fluctuations on the primary side.Configure nowStarting from∗ ： 605.26 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Large Size Vacuum Module: Vacuum Pump System ZR Series
SMC
A vacuum module vacuum pump system ideal for use with multiple or large-sized pads.
[Features]
· Ideal for use with multiple or large-sized pads.
· A vacuum module which is suitable for workpieces ranging in size from 0.5 to 5 kg.
· Modular design makes it possible to combine functions as required.
· Vacuum self-holding function by means of double solenoid valves ensures safety.
· Compact and lightweight.
· Suitable for use in manifolds.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 302.31 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Vacuum Unit, Ejector System, ZX Series
SMC
A vacuum unit ejector system best suited to small precision components.
[Features]
· Electronic components weighing up to 100 g.
· Modular design makes it possible to combine the most suitable functions.
· Compact and lightweight (120 g with complete set), which makes it ideal for installing actuators.
· Ejector nozzles available in 0.5 to 1.0‑mm diameters (suction flow rate 5 to 22 L/min [ANR]).
· Capable of manifolding.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 150.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Vacuum / Release Unit VQD1000-V Series
SMC
A vacuum/release module that does not require a restrictor circuit for release air.
[Features]
· Response speed 13 msec (at 500 mm*).
· 18.5 msec (at 1,000 mm*).
*Distance from module to the workpiece.
· Smooth detachment of workpieces without over-shoot.
· No workpiece blowout caused by release air.
· No need to adjust the timing when switching between vacuum and positive pressure (single signal control).
· N.O. specification (vacuum adhesion type when not energized) and N.C. specification (vacuum shut-off type when not energized) can be selected.Configure nowStarting from∗ ： 119.81 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| RoHS Information |
| Additional Function |
| Ultimate Vacuum(kPa) |
| Air Consumption Flow Rate(l/min) |
| Vacuum Port Connecting Port Shape |
| Vacuum Port One-Touch Fitting Size |
| Air Supply Port Connecting Port Shape |
| Air Supply Port One-Touch Fitting Size |
| Application |
| Suction Flow(l/min) |
| Nozzle Diameter |
| Type of Related Component |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NIHON PISCO | SMC | MISUMI | NIHON PISCO | SMC | SMC | SMC | NIHON PISCO | NIHON PISCO | NIHON PISCO | NIHON PISCO | NIHON PISCO | NIHON PISCO | NIHON PISCO | NIHON PISCO | CKD | SMC | SMC | SMC |
| Product Series | Single Unit Type, Type A Union Straight for Granular / Powder Body Transport | Single Unit Type, Type A Straight for Granular / Powder Body Transport | Single Unit Type, Straight Type B for Granular / Powder Body Transport | Single Unit Type, Type C Straight for Granular / Powder Body Transport | Single Unit Type, Type D Straight for Granular / Powder Body Transport | Single Unit Type, Type A Nipple for Granular / Powder Body Transport | Single Unit Type, Type B Nipple for Granular / Powder Body Transport | Single Unit Type, Type B Union Straight for Granular / Powder Body Transport | Vacuum Generator VG, Built-In Vacuum Switch, Supply and Break Valve, Filter and Cable Side Route | ||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Starting from∗ | 54.78 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 194.00 € *Unit price with basic configuration | 186.76 € *Unit price with basic configuration Volume Discount | 267.15 € *Unit price with basic configuration | 152.89 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 277.47 € *Unit price with basic configuration | 177.40 € *Unit price with basic configuration | 56.69 € *Unit price with basic configuration | 56.82 € *Unit price with basic configuration | 61.44 € *Unit price with basic configuration | 61.55 € *Unit price with basic configuration | 55.74 € *Unit price with basic configuration | 60.49 € *Unit price with basic configuration | 62.46 € *Unit price with basic configuration | 254.47 € *Unit price with basic configuration | 605.26 € *Unit price with basic configuration | 302.31 € *Unit price with basic configuration | 150.89 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 119.81 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | 4 Days | 5 Days | 12 Days | Same day | 4 Days | 4 Days | 5 Days | 5 Days | 10 Days | 10 Days | 5 Days | 5 Days | 5 Days | 12 Days | 9 Days | 26 Days | Same day | 26 Days |
| Type | Pipe Type | Unit | Direct Electromagnetic Valve Mounting Type Straight | Square | Square | Unit | Unit | Pipe Type | Pipe Type | Pipe Type | Pipe Type | Pipe Type | Pipe Type | Pipe Type | Square | Pipe Type | Unit | Unit | Unit |
| RoHS Information | - | - | RoHS Requirements Not Fulfilled | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Additional Function | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation | Valves For Vacuum Generation |
| Ultimate Vacuum(kPa) | -53 | -91 | -93.1 ～ -90.4 | -93 ～ -66 | -84 | -84 ～ -53 | - | -53 | -53 | -53 | -53 | -53 | -53 | -53 | -90 | - | - | -84 | - |
| Air Consumption Flow Rate(l/min) | 50 ～ 300 | 24 ～ 90 | 11.5 ～ 23 | 23$70$150 ～ 46$23$150 | 17 ～ 110 | 53 ～ 194 | - | 50 ～ 300 | 50 ～ 300 | 50 ～ 300 | 50 ～ 300 | 50 ～ 300 | 50 ～ 300 | 50 ～ 300 | 17 ～ 34 | - | - | 13 ～ 46 | - |
| Vacuum Port Connecting Port Shape | Single-Action Coupling | Single-Action Coupling | Single-Action Coupling | Single-Action Coupling | Rc1/8 / Others | Rc1/8 | M5 | Single-Action Coupling | R1/8 / R1/4 / R3/8 / R1/2 | Single-Action Coupling | R1/8 / R1/4 / R3/8 / R1/2 | R1/8 / R1/4 / R3/8 / R1/2 | R1/8 / R1/4 / R3/8 / R1/2 | Single-Action Coupling | Single-Action Coupling | Others | Rc1/8 | M5 | M5 |
| Vacuum Port One-Touch Fitting Size | Ø6 ～ Ø16 | Ø6 ～ Ø8 | Ø4 ～ Ø6 | Ø8 ～ Ø10 | - | - | - | Ø6 ～ Ø16 | - | Ø6 ～ Ø16 | - | - | - | Ø6 ～ Ø16 | Ø6 | - | - | - | - |
| Air Supply Port Connecting Port Shape | Single-Action Coupling | Single-Action Coupling | Single-Action Coupling | Single-Action Coupling | Rc1/8 / G1/8 / NPTF1/8 | Rc1/8 | M5 | Single-Action Coupling | Single-Action Coupling | R1/8 / R1/4 | R1/8 / R1/4 | Single-Action Coupling | R1/8 / R1/4 | R1/8 / R1/4 | Single-Action Coupling | - | Rc1/8 | M5 | M5 |
| Air Supply Port One-Touch Fitting Size | Ø6 / Ø8 / Ø10 | Ø6 | Ø4 / Ø6 | Ø6 / Ø8 / Ø10 | - | - | - | Ø6 / Ø8 / Ø10 | Ø6 / Ø8 / Ø10 | - | - | Ø6 / Ø8 / Ø10 | - | - | Ø6 | - | - | - | - |
| Application | Single Item | Single Item / Manifold | Single Item | Single Item | Single Item / Manifold | Single Item / Manifold | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | - | Single Item | Single Item / Manifold | Manifold |
| Suction Flow(l/min) | 50 ～ 300 | 29 ～ 83 | 7 ～ 13 | 95$42 ～ 95$42$180 | 15 ～ 66 | 25 ～ 132 | - | 50 ～ 300 | 50 ～ 300 | 50 ～ 300 | 50 ～ 300 | 50 ～ 300 | 50 ～ 300 | 50 ～ 300 | 10.5 ～ 21 | - | - | 5 ～ 22 | 16 |
| Nozzle Diameter | - | 0.7mm ～ 1.5mm | 0.5mm ～ 0.7mm | 0.7mm ～ Others | 0.5mm ～ Others | 1.0mm ～ Others | - | - | - | - | - | - | - | - | 0.7mm ～ 1.0mm | 0.5mm | - | 0.5mm ～ 1.0mm | - |
| Type of Related Component | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
RoHS Information
-
Additional Function
- Silencers
- Filter
- Valves For Vacuum Generation
- Reverse Check Valve (Vacuum Retention)
- Mechanical Type, Pressure Switch for Vacuum
- With LED Display, Pressure Switch for Vacuum
- Vacuum Destructive Valve
- Vacuum Destruction Support
- Central Exhaust Specification
- Not Provided
-
Ultimate Vacuum(kPa)
-
Air Consumption Flow Rate(l/min)
-
Vacuum Port Connecting Port Shape
- M5
- Rc1/8
- R1/8
- R1/4
- R3/8
- M3
- Rc1/4
- M6
- R1/2
- Single-Action Coupling
- One-Touch Fitting Elbow
- Others
- Rc3/8
-
Vacuum Port One-Touch Fitting Size
-
Air Supply Port Connecting Port Shape
- M5
- Rc1/8
- R1/8
- R1/4
- G1/8
- 1/8-27 NPT
- Rc1/4
- R3/8
- Single-Action Coupling
- One-Touch Fitting Elbow
- NPT1/4
- Rc3/8
- NPT3/8
- NPTF1/8
-
Air Supply Port One-Touch Fitting Size
- Ø3
- Ø4
- Ø6
- Ø8
- Ø10
- 1/4 (Ø6.35)
- 5/16 (Ø7.94)
- 3/8 (Ø9.53)
-
Application
- Single Item
- Manifold
-
Suction Flow(l/min)
-
Nozzle Diameter
-
Type of Related Component
- Holder/Bracket
- Pressure Switches for Maintenance Components
- Vacuum Fall Prevention Valves
CAD data type
-
- 2D
- 3D
Categories related to Vacuum Generators, Vacuum Ejectors
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.