Washers / Collars / Sleeves (Metal)（Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Spacer sleeves / square / brass / nickel-plated / CQB-E
HIROSUGI-KEIKI
[Supported Screw Nominal (M)] 3/4
[Material] Free-Cutting Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Nickel Plating (Ni)Configure nowStarting from∗ ： 0.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Conical seats Form D DIN 6319, edition 10/01 (K0729)
KIPP
· To compensate for unevenness
· Version: steel or stainless steel- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.38 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Washers / steel / black oxided, nickel-plated【50-100 Pieces Per Package】
MISUMI
- Volume Discount
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.64 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spacer sleeves / brass / nickel-plated / CB-E
HIROSUGI-KEIKI
[Supported Screw Nominal (M)] 1.7/2/2.6/3/4/5/6
[Material] Free-Cutting Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Nickel Plating (Ni)Configure nowStarting from∗ ： 0.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Holding discs for magnets / steel / galvanised, passivated / GN 70.1
GANTER
Adhesive discs GN 70.1 are used as counter piece for retaining magnets if a magnet is to be used on a non-magnetic surface, for instance.
After pulling off the protective film from the adhesive pad at the back, they can be attached to any suitable and clean surface.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.80 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
C-washers DIN 6372 enhanced (07380)
NORELEM
· Can be dismantled without completely removing the screwsConfigure nowStarting from∗ ： 6.54 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Collar (Square Type) B-990
TAKIGEN
Provided with pin. Wide variations are available.
[Features]
· Provided with pin (B-1099, B-99). Wide set variations are available.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3.07 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Centring pin / counterbored / steel / burnished / case-hardened
HALDER
To be used for locating fixtures and clamping elements onto machine tables with T-slots to DIN 650.- 3D CAD data available
Configure nowStarting from∗ ： 5.28 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spacer sleeves / stainless steel / degreased / CU-H
HIROSUGI-KEIKI
[Supported Screw Nominal (M)] 2/2.6/3/4/5
[Material] Stainless Steel (SUS304)
[Processing] Degreasing
* High-grade stainless steel is used for the stainless 304 spacer.
The letter 'H' is marked on the spacer.Configure nowStarting from∗ ： 2.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 21.18 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Rosette washers / stainless steel, PA / sandblasted / GN 185
GANTER
Stainless Steel-Bezel discs GN 185 are used for shrouding screw joints when a visually nice finish is required.
The purpose of the plastic discs supplied as a standard item on delivery is merely to avoid damage to improved surfaces.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2.46 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Forehead washers / conical countersunk hole, chamfered / stainless steel / sandblasted / GN 184, GN 184.5
GANTER
Countersunk washers GN 184.5 are retained to the face of the shaft end with a countersunk head screw DIN ISO 2009 or DIN 7991 forming a clean-look end cap.
A typical application is the retention of handwheels with hub keyed to the shaft.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.50 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Washers DIN 7349 for bolts used for heavy-duty applications (K1968)
KIPP
· Steel, stainless steel A2 or stainless steel A4- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.18 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
End washers, Stainless Steel (K1823)
KIPP
· Accessories for round pull handles
· Stainless steel A4 quality- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.61 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spacer Washer (BJ623)
IMAO CORPORATION
Polishing finish on upper and underside. [Materials]EN 1.1191 Equiv. with surface treatment options: Black oxide coating- 2D / 3D CAD data available
Configure nowStarting from∗ ： 21.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel Collar (Square Type) B-1990
TAKIGEN
Provided with pin. Wide variations are available.
[Features]
· Provided with pin (B-1099, B-99). Wide set variations are available.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 4.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Centring pin / round, threaded hole / steel
HALDER
To be used for locating fixtures and clamping elements onto mounting pallets or pallets with cylindrical location holes.They can be inserted in holes as well as in slots.- 3D CAD data available
Configure nowStarting from∗ ： 60.48 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spacer sleeves / brass / nickel-plated / CE-N
HIROSUGI-KEIKI
[Supported Screw Nominal (M)] 2/2.6/3/4/5/6
[Material] Lead-Free Free-Cutting Brass (Bismuth Base)
[Processing] Nickel Plating (Ni)- Volume Discount
Configure nowStarting from∗ ： 0.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Spacer sleeves / welded / steel / chrome-plated / CF-ZE
HIROSUGI-KEIKI
[Supported Screw Nominal (M)] 2/2.6/3/4/5/6
[Material] Steel Plate (SPCC)
[Processing] Trivalent Chromium Chromate Processing- Volume Discount
Configure nowStarting from∗ ： 0.11 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamping force intensifiers (K0584)
KIPP
· The integrated bearing unit can achieve twice the clamping force with the same lever length
· The component surface is protected by the stationary lower ring
· Higher preload force results in a lower tendency towards material relaxation in the thread- 2D / 3D CAD data available
Configure nowStarting from∗ ： 18.29 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spacing washers (K0860)
KIPP
· Ground height dimension
· Increased strength- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.28 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Collar B-96
TAKIGEN
Available in a range of sizes: outer diameter ø 10 to 18 mm, and hole diameter ø 5 to 10 mm.
Check the e-catalog for sizes not listed in the catalog.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.66 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spacer sleeves / brass / degreased / CB-PC
HIROSUGI-KEIKI
[Supported Screw Nominal (M)] 2/2.6/3/4/5/6
[Material] Brass (C2700T-H), Cadmium Content Less than 10 ppm
[Processing] DegreasingConfigure nowStarting from∗ ： 0.13 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Spacer sleeves / titanium / CTI
HIROSUGI-KEIKI
[Supported Screw Nominal (M)] 3
[Material] Pure Titanium
[Processing] Degreasing
Lightweight titanium has specific gravity about 60% of that of stainless steel, as well as excellent chemical resistance and especially seawater resistance.
Since titanium is non-magnetic, it can be used for electronic equipment, semiconductor manufacturing equipment, medical equipment and the like that require non-magnetic properties.Configure nowStarting from∗ ： 2.46 € Min. Shipping Days ： 20 Days *Unit price with basic configuration
-
Conical seats Form G, D4>D3, DIN 6319, edition 10/01 (K0729)
KIPP
· To compensate for unevenness
· Version: steel or stainless steel- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.47 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
C-washers captive DIN 6371 (K0703)
KIPP
· Can be dismantled without completely removing the screws
· Captive- 2D / 3D CAD data available
Configure nowStarting from∗ ： 17.79 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
C-washers captive DIN 6371 (07520)
NORELEM
· Can be dismantled without completely removing the screws
· CaptiveConfigure nowStarting from∗ ： 21.35 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Conical seats Form G, D4>D3, DIN 6319, edition 10/01 (07420)
NORELEM
· To compensate for unevenness
· Version: steel or stainless steelConfigure nowStarting from∗ ： 0.57 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Sealing washers DIN 7603 copper or Aluminium (K2078)
KIPP
· High temperature resistance- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.12 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spacer for multi-clamping system (41505)
NORELEM
· For extending the lateral adjustment range with end stops
· Quick and secure fastening by screw connection
· Suitable for multi-clamping systemConfigure nowStarting from∗ ： 3.75 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel Collar B-1096
TAKIGEN
Available in a range of sizes: outer diameter ø 10 to 18 mm, and hole diameter ø 5 to 10 mm.
Check the e-catalog for sizes not shown in the catalog.
[Features]
· Provided with pin (B-1099, B-99) wide variations are available.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 3.42 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Forehead C-washers / steel / burnished / DIN 6372
HALDER
[Specifications]
・Product type: Forehead C-washers
・Shape: Straight
・Material: Heat Treatment Steel
・Surface Treatment: Triiron Film
・REACH compliant: Yes
[Features]
・The c-washers (slotted washers) are manufactured according to DIN 6372
・For better handling, the c-washers have a knurling all around- 3D CAD data available
Configure nowStarting from∗ ： 6.85 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Forehead C-washers / steel / burnished / case-hardened / similar to DIN 6372 / GN 183
GANTER
C-Washers GN 183 maybe installed without the removal of the nut from the stud.
In terms of dimensions they are almost identical to DIN 6372 C-Washers.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 7.26 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Forehead washers / conical counterbore, cover cap / steel / zinc-plated, passivated / GN 338
GANTER
Discs with cover caps GN 338 are suitable for use as gliding or non gliding feet on machinery.
Removal of the cover can be done by inserting a screwdriver in the gap on the edge.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2.28 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Holding discs for magnets / conical counterbore / steel / zinc plated, passivated / GN 70
GANTER
Holding discs GN 70 are used as companion parts for retaining magnets, e.g. if a magnet is to be used in connection with non-magnetic materials.
They can be fixed with countersunk screws (e.g. DIN 7991), but also with any commercial wood or sheet metal countersunk screws.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.70 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
C-washers DIN 6372 enhanced (K0730)
KIPP
· Can be dismantled without completely removing the screws- 2D / 3D CAD data available
Configure nowStarting from∗ ： 4.45 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Conical seats Form D DIN 6319, edition 10/01 (07420)
NORELEM
· To compensate for unevenness
· Version: steel or stainless steelConfigure nowStarting from∗ ： 0.46 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping force intensifiers (07415)
NORELEM
· The integrated bearing unit can achieve twice the clamping force with the same lever length
· The component surface is protected by the stationary lower ring
· Higher preload force results in a lower tendency towards material relaxation in the threadConfigure nowStarting from∗ ： 23.00 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Reducer sleeves (K1927)
KIPP
· To change the diameter between the hollow shaft sensor and adjustment spindleConfigure nowStarting from∗ ： 30.59 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Washers for clamps DIN 6340 (K0867)
KIPP
· Increased strength
· For increased strength requirements- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.37 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Captive C-washers, with shoulder screw (K0872)
KIPP
· Quick and easy actuation
· Tempered- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.14 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spacer sleeves, Stainless Steel with seal washer in Hygienic DESIGN (K1822)
KIPP
· Stainless steel 1.4404
· Size M6–M12
· exchangable seal washer
· Foodstuff conform material
· Cleaning optimised geometry- 2D / 3D CAD data available
Configure nowStarting from∗ ： 7.15 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spacer sleeve hygienic design, with seal (07219)
NORELEM
· Stainless steel 1.4404
· Size M6–M12
· exchangable seal washer
· Foodstuff conform material
· Cleaning optimised geometryConfigure nowStarting from∗ ： 8.85 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 23.64 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 12.70 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Shape |
| RoHS Information |
| Inner Shape |
| Features, Areas of Application |
| O.D.(mm) |
| I.D.(mm) |
| Thickness/Length(mm) |
| Material |
| Surface Treatment |
| O.D. Tolerance |
| I.D. Tolerance |
| Thickness/Length Tolerance |
| Sale Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HIROSUGI-KEIKI | KIPP | MISUMI | HIROSUGI-KEIKI | GANTER | NORELEM | TAKIGEN | HALDER | HIROSUGI-KEIKI | HALDER | GANTER | GANTER | KIPP | KIPP | IMAO CORPORATION | TAKIGEN | HALDER | HIROSUGI-KEIKI | HIROSUGI-KEIKI | KIPP | KIPP | TAKIGEN | HIROSUGI-KEIKI | HIROSUGI-KEIKI | KIPP | KIPP | NORELEM | NORELEM | KIPP | NORELEM | TAKIGEN | HALDER | GANTER | GANTER | GANTER | KIPP | NORELEM | NORELEM | KIPP | KIPP | KIPP | KIPP | NORELEM | NORELEM | NORELEM |
| Product Series | Washers / steel / black oxided, nickel-plated【50-100 Pieces Per Package】 | Holding discs for magnets / steel / galvanised, passivated / GN 70.1 | Centring pin / counterbored / steel / burnished / case-hardened | Rosette washers / stainless steel, PA / sandblasted / GN 185 | Washers DIN 7349 for bolts used for heavy-duty applications (K1968) | Conical seats Form G, D4>D3, DIN 6319, edition 10/01 (K0729) | Conical seats Form G, D4>D3, DIN 6319, edition 10/01 (07420) | Forehead C-washers / steel / burnished / case-hardened / similar to DIN 6372 / GN 183 | Forehead washers / conical counterbore, cover cap / steel / zinc-plated, passivated / GN 338 | Holding discs for magnets / conical counterbore / steel / zinc plated, passivated / GN 70 | Spacer sleeves, Stainless Steel with seal washer in Hygienic DESIGN (K1822) | ||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||
| Starting from∗ | 0.40 € *Unit price with basic configuration | 0.38 € *Unit price with basic configuration | 31.64 € *Unit price with basic configuration Volume Discount | 0.22 € *Unit price with basic configuration | 0.80 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 6.54 € *Unit price with basic configuration | 3.07 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 5.28 € *Unit price with basic configuration | 2.05 € *Unit price with basic configuration | 21.18 € *Unit price with basic configuration | 2.46 € *Unit price with basic configuration Volume Discount | 1.50 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 0.18 € *Unit price with basic configuration | 0.61 € *Unit price with basic configuration | 21.82 € *Unit price with basic configuration | 4.45 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 60.48 € Special price *Unit price with basic configuration Promotional pricing | 0.26 € *Unit price with basic configuration Volume Discount | 0.11 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 18.29 € *Unit price with basic configuration | 10.28 € *Unit price with basic configuration | 1.66 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 0.13 € *Unit price with basic configuration | 2.46 € *Unit price with basic configuration | 0.47 € *Unit price with basic configuration | 17.79 € *Unit price with basic configuration | 21.35 € *Unit price with basic configuration | 0.57 € *Unit price with basic configuration | 0.12 € *Unit price with basic configuration | 3.75 € *Unit price with basic configuration | 3.42 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 6.85 € Special price *Unit price with basic configuration Promotional pricing | 7.26 € *Unit price with basic configuration Volume Discount | 2.28 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 0.70 € *Unit price with basic configuration Volume Discount | 4.45 € *Unit price with basic configuration | 0.46 € *Unit price with basic configuration | 23.00 € *Unit price with basic configuration | 30.59 € *Unit price with basic configuration | 0.37 € *Unit price with basic configuration | 19.14 € *Unit price with basic configuration | 7.15 € *Unit price with basic configuration | 8.85 € *Unit price with basic configuration | 23.64 € *Unit price with basic configuration | 12.70 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 4 Days | Same day | 5 Days | Same day | 4 Days | Same day | Same day | 6 Days | 3 Days | 7 Days | Same day | 4 Days | 4 Days | 6 Days | Same day | Same day | Same day | Same day | 4 Days | 4 Days | Same day | 14 Days | 20 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | Same day | Same day | 7 Days | Same day | Same day | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Shape | Square Type | - | Straight | Straight | - | - | Square Type | Square Type | Straight | - | - | - | - | - | Straight | Square Type | Square Type | Straight | Straight | - | - | Straight | Straight | Straight | - | - | - | - | - | - | Straight | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - |
| RoHS Information | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Inner Shape | Straight | - | Straight | Straight | - | - | Straight | Counterbored | Straight | - | - | - | - | - | Straight | Straight | Counterbored | Straight | Straight | - | - | Straight | Straight | Straight | - | - | - | - | - | - | Straight | Slotted Hole, Notched | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Features, Areas of Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D.(mm) | 6 | 10.5 ～ 120 | 10 ～ 20 | 5 ～ 10 | - | 17 ～ 100 | 12 ～ 18 | 4.5 ～ 6.6 | 6 | - | 18 ～ 26 | 16 ～ 52 | - | - | 25 ～ 60 | 14 | 30 ～ 48 | 4 ～ 10 | 3 ～ 7.8 | 24 ～ 35 | - | 10 ～ 18 | 3.2 | 6 | 15 ～ 80 | 38 ～ 74 | 38 ～ 74 | 15 ～ 80 | - | - | 12 ～ 16 | 22 ～ 100 | 22 ～ 56 | 16 ～ 32 | 12 ～ 64 | 17 ～ 100 | 10.5 ～ 120 | 24 ～ 35 | - | - | - | - | - | - | - |
| I.D.(mm) | 3.2 | 6 ～ 75 | 3 ～ 10 | 3.2 ～ 6.3 | - | 5.25 ～ 37 | 5 ～ 10 | - | 3.2 | - | - | - | - | - | 8.4 ～ 17 | 6 | - | 2.2 ～ 6.3 | 2 ～ 6.2 | 6 ～ 12 | - | 5 ～ 10 | 2.2 | 3.2 | 6 ～ 42 | 7.5 ～ 21.5 | 7.5 ～ 21.5 | 6 ～ 42 | - | - | 5 ～ 8 | 6.4 ～ 37 | - | - | - | 5.25 ～ 37 | 6 ～ 75 | 6 ～ 12 | - | - | - | - | - | - | - |
| Thickness/Length(mm) | 10 ～ 30 | 2.1 ～ 30 | 1 ～ 3 | 2.5 ～ 50 | - | 5 ～ 20 | 20 ～ 52 | - | 3 ～ 10 | - | - | - | - | - | 5 ～ 10 | 20 | - | 3 ～ 20 | 1.6 ～ 35 | 8 | - | 20 ～ 54 | 1.5 ～ 2 | 5 | 2.5 ～ 12 | 9.8 ～ 11.8 | 9.8 ～ 11.8 | 2.5 ～ 12 | - | - | 15 ～ 42 | 6 ～ 20 | - | - | - | 5 ～ 20 | 2.1 ～ 30 | 8 | - | - | - | - | - | - | - |
| Material | Brass | - | Steel | Brass | - | - | Steel | Steel | Stainless Steel | - | Stainless Steel | - | - | - | Steel | Stainless Steel | Steel | Brass | Steel | - | - | Steel | Brass | Titanium | - | - | - | - | - | - | Stainless Steel | Steel | - | - | Steel | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | Electroless Nickel Plating | - | Black Oxide / Electroless Nickel Plating | Electroless Nickel Plating | - | - | Not Provided | Black Oxide | Not Provided | - | - | - | - | - | Black Oxide | Not Provided | Black Oxide | Electroless Nickel Plating | Trivalent Chromate (Clear) | - | - | Not Provided | Not Provided | Not Provided | - | - | - | - | - | - | Not Provided | Black Oxide | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D. Tolerance | Not Specified | - | 0 to -0.2 | ±0.05 | - | - | Not Specified | - | Not Specified | - | - | - | - | - | Not Specified | Not Specified | - | Not Specified | +0.2 to -0.1 ～ +0.3 to -0.1 | - | - | Not Specified | Not Specified | Not Specified | - | - | - | - | - | - | Not Specified | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D. Tolerance | ±0.15 | - | +0.3 to +0.1 | ±0.15 | - | - | Not Specified | - | ±0.15 | - | - | - | - | - | Not Specified | Not Specified | - | ±0.15 | ±0.1 ～ ±0.15 | - | - | Not Specified | Not Specified | ±0.15 | - | - | - | - | - | - | Not Specified | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thickness/Length Tolerance | ±0.1 | - | ±0.08 ～ ±0.15 | ±0.1 | - | - | Not Specified | - | ±0.1 | - | - | - | - | - | -0.01 to -0.03 | Not Specified | - | ±0.1 | Not Specified | - | - | Not Specified | Not Specified | ±0.1 | - | - | - | - | - | - | Not Specified | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Sale Type | Sold by the package | - | Sold by the package | Sold by the package | - | - | Sold Separately | - | Sold by the package | - | - | - | - | - | Sold Separately | Sold Separately | - | Sold by the package | Sold by the package | - | - | Sold Separately | Sold Separately / Sold by the package | Sold by the package | - | - | - | - | - | - | Sold Separately | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Shape
-
RoHS Information
-
Inner Shape
-
Features, Areas of Application
-
O.D.(mm)
- 3
- 3.2
- 3.35
- 3.65
- 3.8
- 4
- 4.2
- 4.5
- 5
- 5.2
- 5.3
- 5.5
- 6
- 6.3
- 6.4
- 6.5
- 6.6
- 7
- 7.5
- 7.8
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.2
- 12.5
- 13
- 13.5
- 13.8
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.3
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 21.7
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.2
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.5
- 34
- 34.5
- 35
- 35.5
- 36
- 36.5
- 37.0
- 37.5
- 38
- 38.5
- 39
- 39.5
- 40
- 40.5
- 41
- 41.5
- 42
- 42.5
- 42.7
- 43
- 43.5
- 44
- 44.5
- 45
- 45.5
- 46
- 46.5
- 47.0
- 47.5
- 48
- 48.5
- 48.6
- 49
- 49.5
- 50
- 52
- 55
- 56
- 60
- 61
- 64
- 65
- 68
- 74
- 75
- 78
- 80
- 90
- 92
- 100
- 103
- 120
- 222
[4-50/0.5mm Unit(s)][21-100/1mm Unit(s)]
-
I.D.(mm)
- 0
- 1
- 1.5
- 1.8
- 2
- 2.2
- 2.35
- 2.5
- 2.6
- 2.65
- 2.7
- 2.8
- 3
- 3.2
- 3.5
- 4
- 4.1
- 4.2
- 4.3
- 4.5
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.5
- 5.7
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 7.1
- 7.5
- 7.8
- 8
- 8.2
- 8.4
- 9
- 9.2
- 9.4
- 9.5
- 9.6
- 10
- 10.2
- 10.5
- 10.9
- 11
- 11.5
- 12
- 12.7
- 13
- 13.5
- 14
- 14.2
- 14.3
- 14.5
- 15
- 15.5
- 16
- 16.1
- 16.5
- 17
- 17.5
- 18
- 19
- 19.4
- 20
- 21
- 21.4
- 21.5
- 21.6
- 22
- 23
- 23.2
- 24
- 25
- 26
- 27
- 27.2
- 27.6
- 28
- 30
- 31
- 32
- 32.9
- 33
- 35
- 35.5
- 35.7
- 36
- 37
- 38
- 38.4
- 41.2
- 41.6
- 42
- 45
- 48
- 49
- 56
- 60
- 65
- 75
[2-90/0.5mm Unit(s)]
-
Thickness/Length(mm)
- 0.3
- 0.4
- 0.6
- 0.8
- 1
- 1.5
- 1.6
- 2
- 2.1
- 2.5
- 2.8
- 3
- 3.5
- 4
- 4.2
- 4.5
- 5
- 5.5
- 5.6
- 6
- 6.2
- 6.5
- 7
- 7.5
- 8
- 8.5
- 9
- 9.5
- 9.8
- 10
- 10.5
- 11
- 11.5
- 11.8
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 27
- 28
- 30
- 31
- 32
- 33
- 35
- 40
- 42
- 45
- 50
- 52
- 54
- 60
- 72
- 100
[1-100/0.1mm Unit(s)][1-200/0.5mm Unit(s)][1-10/1mm Unit(s)]
-
Material
-
Surface Treatment
-
O.D. Tolerance
-
I.D. Tolerance
-
Thickness/Length Tolerance
-
Sale Type
Brand
CAD data type
-
- 2D
- 3D
Categories related to Washers / Collars / Sleeves (Metal)
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.