Eye-Bolts, U-Bolts for Plumbing

• 

  Wing Hinge Screws (8)

• 

  Lifting Eyebolts (32)

• 

  • Volume Discount

  GANTER

  DIN 580 Lifting eye bolts, Steel

  These lifting eye bolts correspond to standard sheet DIN 580.The following guidelines of lifting eye bolts DIN 580 the have to be observed in addition to the load values given in the above table.The eye bolt must be of fully screwd in to achieve a perfect contact between the two mating faces.Both threads must be of a equal length and the base material of equal strength to that of the bolt.Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 8 ～ M 36	-	Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  2.62 €～

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  KIPP

  Eye bolts DIN 444 Form B with long thread (K1418)

  [Specifications]・Thread (M): 6-24・Material: Steel, Stainless Steel・Surface finish body: black oxidised, bright[Features]・Suitable for use as hinge pins, swing hinges and guides・Version: steel or stainless steel・Material :Steel or 1.4305 stainless steel・DIN 444

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  6 ～ 24	-	Stainless Steel ～ Steel	-	-	-	8.8	-	-

  Preço regular (excluindo IVA):

  3.16 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  GANTER

  Lifting eye bolts (rotating), Steel

  The lifting eye bolts GN 581are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.The hexagon socket bolt cannot be removed from the ring.Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 6 ～ M 36	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  83.00 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO

  HALDER

  Swing Bolts, DIN 444, form B

  Swing bolts similar to DIN 444 however, steel design with higher quality 8.8. The stainless steel A2-50 design has a tensile strength of min. 500 N/mm2.

  Ler mais

  CAD:

  3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M5 ～ M24	25 ～ 200	Stainless Steel ～ Steel	-	-	Flat End	8.8	Metric Coarse	-

  Preço regular (excluindo IVA):

  4.37 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  REYHER

  DIN 444 Eye bolts

  [Features]・Eye bolts, B = product grade B (mg)・DIN 444

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  0.81 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  KIPP

  Ring bolts DIN 580 (K0767)

  [Specifications]・Thread (M): 8-24・Material: Steel, Stainless Steel・Surface finish body: galvanised, bright[Features]・For hoisting and transport tasks・Application sectors: machine and fixture construction, toolmaking, logistics, material handling・Version: steel or stainless steel・(K0767)・DIN 580

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  8 ～ 24	-	Stainless Steel ～ Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  1.25 €～

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  GANTER

  Lifting eye nuts, Stainless Steel A2

  The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.Both threads must be of a equal length and the base material of equal strength to that of the nut.Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 8 ～ M 24	-	Stainless Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  5.96 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  HALDER

  Threaded Lifting Pins, self-locking

  Heavy-duty lifting element for quick and easy use, with moveable shackle and locking stud to provide protection against unintentional unlocking. For lifting loads, the threaded lifting pin is inserted into a threaded hole. In contrast to a ringbolt, time-consuming screwing in and out is therefore unnecessary.All versions are corrosion-protected. The version made from stainless steel is also resistant to corrosion and weathering, so it is also suitable for external use. In addition, the high-strength, precipitation-hardened pin makes extreme loads possible.[Operation]The threaded elements are unlocked by pressing the button.

  Ler mais

  CAD:

  3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M8 ～ M30	17.6 ～ 45	Stainless Steel ～ Steel	-	-	Flat End	-	Metric Coarse	Low Quantity (Available beginning with 1 pc.)

  Preço regular (excluindo IVA):

  181.45 €～

  Data de envio regular:

  2 dias úteis

  Configurar
• 

  • DESCONTO

  HALDER

  Lifting Pin Self-Locking

  [Features]· Corrosion resistant· Heat resistant to 250°C· Locating· Bushing use one from 22350.0900 to 0.0936 (for d1 = 8, 10, 12, 16).· Fitting for hanging that is speedy and simple to use yet solid.· The movable shackle is equipped with a safety bar to prevent the button from being pushed unintentionally.· A tap hole is not required for the item to be hung, only a H11 hole is needed.

  Ler mais

  CAD:

  3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  69.60 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  MISUMI

  Wing Hinge Screws

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  6 ～ 16	30 ～ 100	Stainless Steel	-	1 ～ 2	Flat End	-	Metric Coarse	-

  Preço regular (excluindo IVA):

  6.33 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  SUNCO

  Eye Bolt Screws【1 a 200 unidades】

  It can be used for a variety of purposes such as lifting or as a replacement for joints. It is generally used as a hinge for doors, gates, etc., with the round hole in the screw head serving as the axis.

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  6 ～ 30	25 ～ 400	Stainless Steel ～ Steel	Not Provided / Black Oxide Coating / Trivalent Chromate / Bright Chrome Plating	-	Rounded End	-	Metric Coarse	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  Preço regular (excluindo IVA):

  2.93 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  GANTER

  Lifting eye bolts (rotating), Stainless Steel

  Stainless Steel-Lifting eye bolts GN 581.5 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in Stainless Steel-Lifting eye bolts DIN 580).Stainless Steel-Lifting eye bolts GN 581.5 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.Stainless Steel-Lifting eye bolts GN 581.5 eye bolts comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.The hexagon socket bolt cannot be removed from the ring.

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 12 ～ M 24	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  182.42 €～

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  GANTER

  Swing bolts with long threaded bolt

  GN 1524 swing bolts offer a longer threaded bolt contrary to DIN 444.For stocking purposes cylinder head shoulder bolts GN 732 can be used for the sizes M8, M10 and M12.

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 6 ～ M 24	50 ～ 240	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  6.52 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  MAEDLER

  Swing Bolts Similar to DIN 444, Steel

  Material: Steel, black oxide finish, tensile strength 5.8.Precision made, thread rolled.Contrary to the standards sheet the black oxide finished steel version has a higher tensile strength (5.8 instead of 4.6 / 5.6) and the thread length l2 is larger.

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 5 ～ M 20	-	Steel	Black Oxide	-	-	5.8	-	-

  Preço regular (excluindo IVA):

  6.62 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  GANTER

  Lifting eye bolts, Stainless Steel A2

  The following guidelines for Stainless Steel-Lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table.The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.Both threads must be of a equal length and the base material of equal strength to that of the bolt.Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 8 ～ M 24	-	Stainless Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  5.68 €～

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  KIPP

  Eye bolts DIN 444 Form B (K0396)

  [Specifications]・Thread (M): 5-20・Material: Steel, Stainless Steel・Surface finish body: black oxidised, bright[Features]・Suitable for use as hinge pins, swing hinges and guides・Version: steel or stainless steel・DIN 444

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  5 ～ 20	-	Stainless Steel ～ Steel	-	-	-	8.8	-	-

  Preço regular (excluindo IVA):

  3.16 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  REYHER

  DIN 582 Lifting eye nuts

  Lifting eye nuts; Nuts

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  1.59 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  MISUMI

  [Clean & Pack]Wing Hinge Screws - High Precision

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.[Volume Discount Rate]An average discount of 30% from 10 pcs. or more.

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  6 ～ 16	30 ～ 100	Stainless Steel	Not Provided	1 ～ 2	Flat End	-	Metric Coarse	-

  Preço regular (excluindo IVA):

  10.46 €～

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  GANTER

  Lifting eye bolts, Stainless Steel A4

  The following guidelines for Stainless Steel-Lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table.The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.Both threads must be of a equal length and the base material of equal strength to that of the bolt.Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 10 ～ M 24	-	Stainless Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  11.80 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO

  HALDER

  Locating· For Bushing Lifting Pin

  This bushing is a reliable holder for the safety of the lifting pin EH22350. [Features]· Mounting is simple and reliable.· Can be mounted to products made of various material.· Can be used in narrow areas or blind holes.· High corrosion resistance· Wear resistant

  Ler mais

  CAD:

  3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  34.34 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  KIPP

  Ring bolts similar to DIN 580 (K1333)

  [Specifications]・Thread (M): 8-20・Material: Stainless Steel・Surface finish body: bright[Features]・For hoisting and transport tasks・Application sectors: machine and fixture construction, toolmaking, logistics, material handling・(K1333)・DIN 580

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  8 ～ 20	-	Stainless Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  5.60 €～

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  NORELEM

  Eye bolts DIN 444, Form B (07180)

  · Suitable for use as hinge pins, swing hinges and guides· Version: steel or stainless steel

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  5 ～ 20	50 ～ 140	Stainless Steel ～ Steel	-	-	Rounded End	8.8	-	-

  Preço regular (excluindo IVA):

  4.17 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  NORELEM

  Eye bolts DIN 444, Form B with long thread (07181)

  · Suitable for use as hinge pins, swing hinges and guides· Version: steel or stainless steel

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  6 ～ 24	50 ～ 240	Stainless Steel ～ Steel	-	-	Rounded End	8.8	-	-

  Preço regular (excluindo IVA):

  3.91 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  NORELEM

  Lifting pins self-locking (07780)

  · Quick and simple carrier element with movable shackles· The balls can be released by a push button· The balls are locked again by releasing the push button· 5x safety factor· TÜV tested

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	Steel	-	-	Flat End	-	-	-

  Preço regular (excluindo IVA):

  84.81 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  REYHER

  DIN 580 Eyebolts

  [Features]・Lifting eye bolts・DIN 580

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  1.50 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  GANTER

  Stainless Steel-Swing bolts with long threaded bolt

  Stainless Steel-Swing bolts GN 1524 offer a longer threaded bolt contrary to DIN 444.For stocking purposes cylinder head shoulder bolts GN 732 can be used for the sizes M8, M10 and M12.

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 6 ～ M 20	50 ～ 160	Stainless Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  10.30 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  KIPP

  Ring nuts DIN 582 (K0768)

  [Specifications]・Thread (M): 8-24・Material: Steel, Stainless Steel・Surface finish body: bright, galvanised[Features]・For hoisting and transport tasks・Application sectors: machine and fixture construction, toolmaking, logistics, material handling・Version: steel or stainless steel・(K0768)・DIN 582

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  8 ～ 24	-	Stainless Steel ～ Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  1.16 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  GANTER

  Lifting eye nuts, Steel

  The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.Both threads must be of a equal length and the base material of equal strength to that of the nut.Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 8 ～ M 36	-	Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  2.58 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  NORELEM

  Ring nuts similar to DIN 582 (07690-01)

  · For hoisting and transport tasks· Application sectors: machine and fixture construction, toolmaking, logistics, material handling

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  8 ～ 20	-	Stainless Steel	-	-	Rounded End	-	-	-

  Preço regular (excluindo IVA):

  6.78 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  REYHER

  DIN 80704 Bow nuts

  Bow nuts; Nuts

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  8.06 €～

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  • Volume Discount

  GANTER

  Lifting eye nuts (rotating), Steel

  Lifting eye nuts GN 583 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye nuts DIN 582).Lifting eye nuts GN 583 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.Lifting eye nuts GN 583 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.The hexagon socket nut cannot be removed from the ring.

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 8 ～ M 30	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  101.30 €～

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  HALDER

  Threaded Lifting Pins, self-locking, with rotatable shackle

  MaterialPin part • Heat-treated steel, tempered, manganese phosphated • Stainless steel 1.4542, precipitation-hardenedPress button • Aluminium, orange, anodisedThreaded element • Stainless steel 1.4542, precipitation-hardenedShackle • Heat-treated steel, tempered, manganese phosphated • Stainless steel 1.4571Spring • Stainless SteelAssemblyThreaded lifting pins can be mounted into a thread that is true to gauge.Mounting: • Press in the button and hold it down. • Insert the threaded lifting pin. • Release the button (The button must be back in its original position.). • Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface. • It must be ensured that the threaded segments are engaged in the mounting thread.Dismantling: • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise. • Press in the button and hold it down. • Remove the threaded lifting pin. • Release the button.OperationEach threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.

  Ler mais

  CAD:

  3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M10 ～ M24	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  300.46 €～

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  • DESCONTO

  HALDER

  Lifting Pin, Self-Locking, Stainless Steel

  [Features]· Has high corrosion and weather resistance enabling use outdoors· Pin part uses hardened stainless steel and so has high strength· Operating temperature range is to a maximum of 250°C· Locating· Bushing use from 22350.0900 to 0.0936 (d1 = 8, 10, 12, 16) as well.· Fitting for hanging that is speedy and simple to use yet solid. The movable shackle is equipped with a safety bar to prevent the button from being pushed unintentionally. A tap hole is not required for the item to be hung, only a H11 hole is needed.

  Ler mais

  CAD:

  3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  125.97 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  NORELEM

  Ring bolts DIN 580 (07680)

  · For hoisting and transport tasks· Application sectors: machine and fixture construction, toolmaking, logistics, material handling· Version: steel or stainless steel

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  8 ～ 24	-	Stainless Steel ～ Steel	-	-	Rounded End	-	-	-

  Preço regular (excluindo IVA):

  1.50 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  NORELEM

  Hoist pins VDI 3366 (07679-01)

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	80 ～ 200	Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  27.63 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  SUNCO

  Denden Bolt (Whitworth)

  [Material] Steel[Nominal of Thread] 3/8 1/2 5/8 3/4 4/8 1

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	140	Steel	Not Provided	-	Flat End	-	Cross-Head	Low Quantity (Available beginning with 1 pc.)

  Preço regular (excluindo IVA):

  20.37 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  REYHER

  DIN 28129 Lifting nuts

  ADW7; Nuts; eye nuts

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  81.14 €～

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  HALDER

  Ball Lock Connectors, self-locking, with holder, compact construction

  Parts can be connected fast and easily with the ball lock connector in combination with the locating bushings.The locating bushings are made from stainless steel. There are two versions available that can be mounted into wood and one version that can be mounted into plastic.As a robust tool, the item is made from stainless steel. The ball lock connector is maintenance-free, soundless and secured against loss.[Operation]The balls are unlocked by pressing the knob.

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  6.95 €～

  Data de envio regular:

  2 dias úteis

  Configurar
• 

  KIPP

  Ring nuts similar to DIN 582 (K1334)

  [Specifications]・Thread (M): 8-20・Material: Stainless Steel・Surface finish body: bright[Features]・For hoisting and transport tasks・Application sectors: machine and fixture construction, toolmaking, logistics, material handling・(K1334)・DIN 582

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  8 ～ 20	-	Stainless Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  5.23 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  KIPP

  Lifting pins self-locking, Stainless Steel (K1919)

  · Quick and simple carrier element with movable shackles · The balls can be released by a push button· The balls are locked again by releasing the push button· Corrosion protected· TÜV tested

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  132.81 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  REYHER

  ART 88536 FISCHER-Dübel

  Dübel u. Anker für Gerüste u. Fassaden (FISCHER); FISCHER-Dübel und Anker; Gerüsthalter (Dübel / Ringösen)

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  2.04 €～

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  GANTER

  Lifting eye nuts, Stainless Steel A4

  The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.Both threads must be of a equal length and the base material of equal strength to that of the nut.Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  M 10 ～ M 24	-	Stainless Steel	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  12.30 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  NORELEM

  Ring nuts DIN 582 (07690)

  · For hoisting and transport tasks· Application sectors: machine and fixture construction, toolmaking, logistics, material handling· Version: steel or stainless steel

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  8 ～ 24	-	Stainless Steel ～ Steel	-	-	Rounded End	-	-	-

  Preço regular (excluindo IVA):

  1.39 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  KIPP

  Lifting pins self-locking (K1920)

  · Quick and simple carrier element with movable shackles· The balls can be released by a push button· The balls are locked again by releasing the push button· 5x safety factor· TÜV tested

  Ler mais

  CAD:

  2D

  /3D

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  70.68 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  NORELEM

  Lifting pins self-locking, stainless steel (07782)

  · For extreme loads and maximum wear-resistance · Quick and simple carrier element with movable shackles· The balls can be released by a push button· The balls are locked again by releasing the push button· 5x safety factor

  Ler mais

  Screw Nominal (M)	Length L (mm)	Material	Surface Treatment	Pitch(mm)	Tip Shape	Strength Class (Steel)	Thread Type	Sales Unit
  -	-	Stainless Steel	-	-	Rounded End	-	-	-

  Preço regular (excluindo IVA):

  142.97 €～

  Data de envio regular:

  4 dias úteis

  Configurar