Condições de filtragem

Limpar tudo

Estoque
Mostrar apenas artigos em stock

Nominal of Thread (M)

Length L (mm)(mm)

Length L (inch)

Material

Surface Treatment

Pitch(mm)

0.25
0.3
0.35
0.4
0.45
0.5
0.7
0.8
1
1.25
1.5
1.75

Thread ridge Type

Sales Unit

Nominal of Thread (inch)

Application

Plastic Material

Screw Type

Fabricante

CAD

Tamper Proof Button Head Cap Screws

Technical Standard

129 itens

* Informações sobre dias de expedição, custos de expedição e preços

Lista

Foto

Comparar especificações

Número de itens a exibir:Ordenar por:

Seguinte

- Volume Discount
MISUMI
Button Head Cap Screws / Tamper Proof
CAD:
2D
/3D
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Button 3 ～ 8 6 ～ 50 - Stainless Steel N/A Hex Socket 0.5 ～ 1.25 Flat End
Preço regular (excluindo IVA):
0.61 €～
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar
- Volume Discount
SAIMA CORPORATION
Tamper-Proof One-Way Pan Head Screw
[Features]· An ordinary flat-head driver can be used to tighten, and to remove use "One-way removal tool."· There is no recess at the head, and so dirt does not collect, so ideal for outdoor use.
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Pan 3 ～ 6 5 ～ 40 - Stainless Steel - One-Way Screw 0.5 ～ 1 Flat End
Preço regular (excluindo IVA):
0.44 €～
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar
- DESCONTO
- Volume Discount
NABEYA BI-TECH
One-Way Pan Head Screw_SROS【1 a 20 unidades】
[Features]· Can be installed with a normal flat head driver, but cannot be removed this way.· For use in device / equipment dismantling or theft prevention.· Use specialist tool SROT to remove.· Thread can be supplied cut to any length required.· Material / finish SUS304.
Ler mais
CAD:
2D
/3D
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Pan 3 ～ 5 5 ～ 25 - Stainless Steel N/A One-Way Screw 0.5 ～ 0.8 Flat End
Preço regular (excluindo IVA):
2.73 €～
Preço regular (excluindo IVA):
Preço especial
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar
- Volume Discount
SAIMA CORPORATION
Tamper-Proof Screw Specialist Tool One-Way Screw Use Removal Tool
[Features]· Dedicated unlocking tool for removal of one-way screws.
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
- - - - - - One-Way Screw - -
Preço regular (excluindo IVA):
178.38 €
Data de envio regular:
6 dias úteis
Configurar
- Volume Discount
REYHER
ISO 14583 Hex.socket panhead scr
Cross recessed screws; Raised cheese head screws
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Disc 1.6 ～ 10 2 ～ 60 - Stainless Steel N/A Hexalobuler Hole - -
Preço regular (excluindo IVA):
0.03 €～
Data de envio regular:
3 dias úteis
Configurar

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Button	3 ～ 8	6 ～ 50	-	Stainless Steel	N/A	Hex Socket	0.5 ～ 1.25	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Pan	3 ～ 6	5 ～ 40	-	Stainless Steel	-	One-Way Screw	0.5 ～ 1	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Pan	3 ～ 5	5 ～ 25	-	Stainless Steel	N/A	One-Way Screw	0.5 ～ 0.8	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
-	-	-	-	-	-	One-Way Screw	-	-

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Disc	1.6 ～ 10	2 ～ 60	-	Stainless Steel	N/A	Hexalobuler Hole	-	-

DESCONTO
Volume Discount

NISSAN SCREW

Hexalobular Button Bolt with Hole【1 a 1000 unidades】

[Material] Stainless steel[Surface treatment] None, trivalent chromate, trivalent black, trivalent white, bright chromate plating, chromate plating, black chromate, nickel plating

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Button	3 ～ 12	5 ～ 50	-	Stainless Steel ～ Steel	-	Hexalobuler Hole	0.5 ～ 1.75	Flat End

Preço regular (excluindo IVA):

0.16 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

DESCONTO
Volume Discount

REYHER

ISO 14581 Hexab. socket CSK scr.

Countersunk head screws with hex. internal diving; TORX screws; srews with hexalobular internal driving

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Low Head	2 ～ 8	3 ～ 60	-	Stainless Steel ～ Steel	N/A / Zinc Plating	Hexalobuler Hole	-	-

Preço regular (excluindo IVA):

0.03 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

DESCONTO
Volume Discount

NISSAN SCREW

Hexalobular Bolt with Hole【1 a 1000 unidades】

Made of steel and stainless steel, available in different sizes. -Fixing hole shape: Hexagonal hole - Thread type: Metric coarse - Basic shape: Standard (Round) - Tip shape: Flat tip.

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Standard	3 ～ 12	5 ～ 50	-	Stainless Steel ～ Steel	-	Hexalobuler Hole	0.5 ～ 1.75	Flat End

Preço regular (excluindo IVA):

0.21 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

- DESCONTO
- Volume Discount
REYHER
ISO 14583 Pan head screws
Cross recessed screws; Raised cheese head screws
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Disc 2 ～ 6 4 ～ 40 - Steel Zinc Plating Hexalobuler Hole - -
Preço regular (excluindo IVA):
0.03 €～
Preço regular (excluindo IVA):
Preço especial
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Disc	2 ～ 6	4 ～ 40	-	Steel	Zinc Plating	Hexalobuler Hole	-	-

DESCONTO
Volume Discount

SUNCO

Weld Bolt【1 a 2500 unidades】

[Materials] stainless steel[Surface treatment] None, trivalent chromate, non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, black / white chromate

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Flat	4 ～ 12	8 ～ 60	-	Stainless Steel ～ Steel	N/A / Non-Chrome / Trivalent Chromate / Bright Chromate Plating / Chromate Plating	N/A	0.7 ～ 1.75	Flat End

Preço regular (excluindo IVA):

0.31 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

TRF / Tamper-Proof Screw, Stainless Steel Pin, Small Button TRX Screw

Volume Discount

SUNCO

TRF / Tamper-Proof Screw, Stainless Steel Pin, Small Button TRX Screw【1 a 100 unidades】

[Nominal] 3 4 5 6 8[Material] Stainless Steel[Surface Processing] None / Loosening Prevention Coating / Black Coating

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Button	3 ～ 10	6 ～ 80	-	Stainless Steel	Black Paint / N/A	Hexalobuler Hole	0.5 ～ 1.5	Flat End

Preço regular (excluindo IVA):

0.81 €～

Data de envio regular:

6 dias úteis

Configurar

- DESCONTO
- Volume Discount
NABEYA BI-TECH
2-Hole Pan Head Screw_SRTS【1 a 20 unidades】
2-hole pan head screw. With excellent design, can also be used decoratively.[Features]· Pan head screw with 2 holes.· Excellent design.· Can also be used decoratively.· Cannot be fastened or removed with ordinary tools.· For use in device / equipment dismantling or theft prevention.· Specialist bit for fixing and removing SRTB for use with magnetic driver SRD.· Thread can be supplied cut to any length required.· Material / finish SUS304
Ler mais
CAD:
2D
/3D
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Pan 3 ～ 5 6 ～ 20 - Stainless Steel N/A Two-Hole 0.5 ～ 0.8 Flat End
Preço regular (excluindo IVA):
2.10 €～
Preço regular (excluindo IVA):
Preço especial
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Pan	3 ～ 5	6 ～ 20	-	Stainless Steel	N/A	Two-Hole	0.5 ～ 0.8	Flat End

Button Bolt with Hexalobuler Hole (with Pin)_SRBS

DESCONTO
Volume Discount

NABEYA BI-TECH

Button Bolt with Hexalobuler Hole (with Pin)_SRBS【1 a 20 unidades】

Button bolt with pin in center of hexalobuler hole. Cannot be fitted or removed with ordinary tools. For use tamper-proofing devices and equipment from dismantling or theft.

Ler mais

CAD:: 2D; /3D

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Button	3 ～ 8	6 ～ 50	-	Stainless Steel	N/A	Hexalobuler Hole	0.5 ～ 1.25	Flat End

Preço regular (excluindo IVA):

1.49 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

DESCONTO
Volume Discount

SAIMA CORPORATION

System 5 Tamper-Proof Screw (5 Lobe)

TRF (Tamper Resistant Fasteners) System 5 (Five) products. Please use it when you need a small size. -Heavy duty latching function, resistant to petrol/oil/grease/solvents. Lightweight, rustproof and excellent workability.

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Button	2 ～ 2.6	3 ～ 20	-	Stainless Steel	-	Hexalobuler Hole	0.4 ～ 0.45	Flat End

Preço regular (excluindo IVA):

0.19 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

- Volume Discount
REYHER
ISO 14579 Hex. socket cap screws
Hexalobular internal driving socket head cap screw; ISO-Screws; TORX screws
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Standard 6 ～ 8 16 ～ 35 - Steel Zinc Plating Hexalobuler Hole - -
Preço regular (excluindo IVA):
0.24 €～
Data de envio regular:
3 dias úteis
Configurar
- Volume Discount
MISUMI
Hex Wrench
CAD:
2D
/3D
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
- - - - - - - - -
Preço regular (excluindo IVA):
10.75 €
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Standard	6 ～ 8	16 ～ 35	-	Steel	Zinc Plating	Hexalobuler Hole	-	-

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
-	-	-	-	-	-	-	-	-

DESCONTO
Volume Discount

SAIMA CORPORATION

Tamper-Proof Pin / Button 6-Lobe Bolt

[Features]· Due to pin at the center of the star-shaped hole, normal 6-lobe wrenches cannot be inserted.· Torque transmission is good, meaning that it will not come-away and that workability is excellent.

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Button	3 ～ 10	6 ～ 70	-	Stainless Steel	-	Hexalobuler Hole	0.5 ～ 1.5	Flat End

Preço regular (excluindo IVA):

0.48 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

DESCONTO
Volume Discount

SAIMA CORPORATION

Tamper-Proof Screw Tricle Button Bolt

Only type A products are offered. -Manipulation-proof screw - Shape of fixing hole: Triangular - Material: Stainless steel - Thread type: Metric coarse - Basic shape: Standard (Round) - Tip shape: Flat tip - Purchase unit: Available separately (can be purchased separately).

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Button	5 ～ 8	10 ～ 50	-	Stainless Steel	-	Hexalobuler Hole	0.8 ～ 1.25	Flat End

Preço regular (excluindo IVA):

3.04 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

- Volume Discount
REYHER
DIN 15237 Seating screw
Belting bolts; Elevator Bolts
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Disc 6 ～ 12 20 ～ 60 - Steel N/A N/A - -
Preço regular (excluindo IVA):
1.29 €～
Data de envio regular:
3 dias úteis
Configurar
- DESCONTO
- Volume Discount
SAIMA CORPORATION
5-Lobe Tamper-Proof Screw (Petal)
As a pin stands at center of 5-lobe socket, ordinary tools cannot be used to remove.[Features]· As a pin stands at center of 5-lobe socket, ordinary tools cannot be used to remove.· Fastening and removal possible with dedicated tool
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Button 3 ～ 8 6 ～ 60 - Stainless Steel - - 0.5 ～ 1.25 Flat End
Preço regular (excluindo IVA):
1.51 €～
Preço regular (excluindo IVA):
Preço especial
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar
- Volume Discount
REYHER
DIN 7500 Thread rolling screws with Hexalobular head
Cross recessed screws; Dry wall screws; TORX screws; Threadforming screws; srews with hexalobular internal driving
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Pan 3 ～ 8 4 ～ 60 - Steel Zinc Plating Hexalobuler Hole - -
Preço regular (excluindo IVA):
0.03 €～
Data de envio regular:
3 dias úteis
Configurar

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Disc	6 ～ 12	20 ～ 60	-	Steel	N/A	N/A	-	-

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Button	3 ～ 8	6 ～ 60	-	Stainless Steel	-	-	0.5 ～ 1.25	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Pan	3 ～ 8	4 ～ 60	-	Steel	Zinc Plating	Hexalobuler Hole	-	-

DESCONTO
Volume Discount

NABEYA BI-TECH

NBK Hexalobular Socket Head Cap Screws With Low Profile SLTS【1 a 50 unidades】

● Low-profile hexalobular socket head cap screws. ● For helping make equipment and devices smaller, or for use in areas with limited overhead space. ● Hexalobular socket holes are designed to withstand high tightening torque.

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Low Head	2 ～ 6	4 ～ 30	-	Stainless Steel	N/A	Hexalobuler Hole	0.4 ～ 1	Flat End

Preço regular (excluindo IVA):

1.71 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

DESCONTO
Volume Discount

SUNCO

Slotted Fillister Head Screw【1 a 8000 unidades】

[Materials]SWCH equivalent SUS307J3 equivalent, brass[Surface treatment] None, non-chrome plating white, trivalent chromate plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, bright chromate, nickel plating, trivalent stainless coating.

Ler mais

CAD:: 2D; /3D

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Flat	1 ～ 8	2 ～ 50	-	Brass	N/A / Non-Chrome / Trivalent Chromate / Bright Chromate Plating / Chromate Plating / Nickel Plating / Stainless Steel Coating	Flathead	0.25 ～ 1.25	Flat End

Preço regular (excluindo IVA):

0.33 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

- DESCONTO
- Volume Discount
SAIMA CORPORATION
Tamper-Proof Pin / Hex Hole Button Bolt
Excellent torque transmission during tightening.[Features]· Due to pin at center of the hex hole, normal hex wrenches are blocked.
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Button 3 ～ 12 6 ～ 100 - Stainless Steel - Hex Socket 0.5 ～ 1.75 Flat End
Preço regular (excluindo IVA):
0.44 €～
Preço regular (excluindo IVA):
Preço especial
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar
- DESCONTO
- Volume Discount
SAIMA CORPORATION
Tamper-Proof Tri-Wing Pan Head Screw
[Features]· A Phillips or flat-head driver will not engage in the triangular hole.
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Pan 3 ～ 8 6 ～ 50 - Stainless Steel - Tri-Wing 0.5 ～ 1.25 Flat End
Preço regular (excluindo IVA):
0.48 €～
Preço regular (excluindo IVA):
Preço especial
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar
- DESCONTO
- Volume Discount
NISSAN SCREW
Hexalobular Flat Head Bolt with Hole
Compared to hex holes, tightens even with shallow purchase, and compared to Phillips head tightens well in any situation.
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Disc 3 ～ 8 6 ～ 35 - Steel - Hexalobuler Hole 0.5 ～ 1.25 Flat End
Preço regular (excluindo IVA):
0.13 €～
Preço regular (excluindo IVA):
Preço especial
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Button	3 ～ 12	6 ～ 100	-	Stainless Steel	-	Hex Socket	0.5 ～ 1.75	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Pan	3 ～ 8	6 ～ 50	-	Stainless Steel	-	Tri-Wing	0.5 ～ 1.25	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Disc	3 ～ 8	6 ～ 35	-	Steel	-	Hexalobuler Hole	0.5 ～ 1.25	Flat End

DESCONTO
Volume Discount

SUNCO

TRX Flat Head Machine Screw【1 a 6000 unidades】

[Material] Stainless steel[Surface treatment] None, non-chrome black, trivalent chromate, non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, black chromate, nickel plating, chrome plating, trivalent stainless steel coating, German brown plating, black paint

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Disc	2.5 ～ 8	4 ～ 45	-	Stainless Steel ～ Steel	Copper Plating / Black Paint / N/A / Non-Chrome / Trivalent Chromate / Bright Chromate Plating / Chromate Plating / Nickel Plating / Chrome Plated / Stainless Steel Coating	Hexalobuler Hole	0.45 ～ 1.25	Flat End

Preço regular (excluindo IVA):

0.05 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

- DESCONTO
- Volume Discount
SAIMA CORPORATION
Tamper-Proof Tri-Wing Countersink Screw
[Features]· A Phillips or flat-head driver will not engage in the triangular hole.
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Disc 3 ～ 8 6 ～ 50 - Stainless Steel - Tri-Wing 0.5 ～ 1.25 Flat End
Preço regular (excluindo IVA):
1.00 €～
Preço regular (excluindo IVA):
Preço especial
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar
- Volume Discount
OSG SYSTEM PRODUCTS
LH Machine Screw【1 a 2000 unidades】
[Material] Stainless steel[Surface treatment] none, trivalent chromate, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, chrome plating
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Pan 2.6 ～ 6 5 ～ 30 - Stainless Steel ～ Steel - N/A 0.45 ～ 1 Flat End
Preço regular (excluindo IVA):
0.30 €～
Data de envio regular:
6 dias úteis
Configurar

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Disc	3 ～ 8	6 ～ 50	-	Stainless Steel	-	Tri-Wing	0.5 ～ 1.25	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Pan	2.6 ～ 6	5 ～ 30	-	Stainless Steel ～ Steel	-	N/A	0.45 ～ 1	Flat End

Flat Head Bolt with Hexalobular Socket, New JIS

DESCONTO
Volume Discount

NISSAN SCREW

Flat Head Bolt with Hexalobular Socket, New JIS【1 a 500 unidades】

[Material] Stainless steel[Surface treatment] None, bright chromate plating, chromate plating.

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Disc	6 ～ 8	10 ～ 40	-	Stainless Steel ～ Steel	-	Hexalobuler Hole	1 ～ 1.25	Flat End

Preço regular (excluindo IVA):

0.40 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

- DESCONTO
- Volume Discount
NABEYA BI-TECH
Button Bolt with Hex Socket Head (with Pin)_SRHS【1 a 20 unidades】
Button bolt with pin at center of hex hole. Cannot be fitted or removed with ordinary tools. For use tamper-proofing devices and equipment from dismantling or theft.
Ler mais
CAD:
2D
/3D
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Button 3 ～ 6 6 ～ 25 - Stainless Steel N/A Hex Socket 0.5 ～ 1 Flat End
Preço regular (excluindo IVA):
1.49 €～
Preço regular (excluindo IVA):
Preço especial
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar
- Volume Discount
SAIMA CORPORATION
Specialist Tool Bit for Tamper-Proof Screws Tricle Use Bit
Available in 7 sizes, compatible with tamper proof TRF pin
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
- - - - - - Hexalobuler Hole - -
Preço regular (excluindo IVA):
37.35 €
Data de envio regular:
6 dias úteis
Configurar
- Volume Discount
SAIMA CORPORATION
Specialist Tool for Tamper-Proof Screws System 5 Specialist Bit
Available in 2 sizes, tamper-proof, System 5 TRF-compatible bit.
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
- - - - - - Hexalobuler Hole - -
Preço regular (excluindo IVA):
36.20 €
Data de envio regular:
8 dias úteis
Configurar

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Button	3 ～ 6	6 ～ 25	-	Stainless Steel	N/A	Hex Socket	0.5 ～ 1	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
-	-	-	-	-	-	Hexalobuler Hole	-	-

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
-	-	-	-	-	-	Hexalobuler Hole	-	-

DESCONTO
Volume Discount

SAIMA CORPORATION

Slim Head / Six Lobe Screw

Suitable for places where countersunk screws cannot be used in thin panel fixings. Even when tightened to the same torque as a general screw (equivalent to strength class 4.8), the head will not fly off or break. You can use it as a substitute for machine screws.

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Ultra Low Head	2 ～ 6	3 ～ 40	-	Stainless Steel ～ Steel	-	Hexalobuler Hole	0.4 ～ 1	Flat End

Preço regular (excluindo IVA):

0.25 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

TRUSCO NAKAYAMA
Magnetic Screwdriver for Tamper-Proof Screws
This screwdriver is used when replacing bits. The bit can be fixed with a magnet at the tip.
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
- - - - - - - - -
Preço regular (excluindo IVA):
44.79 €
Data de envio regular:
6 dias úteis
Configurar

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
-	-	-	-	-	-	-	-	-

TRF / Tamper-Proof Screw, Stainless Steel, One Sided, Small Pot Screw

DESCONTO
Volume Discount

SUNCO

TRF / Tamper-Proof Screw, Stainless Steel, One Sided, Small Pot Screw【1 a 100 unidades】

[Nominal] 3 4 5 6[Material] Stainless Steel[Surface Processing] None / Loosening Prevention Coating / Black Coating

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Pan	3 ～ 6	5 ～ 40	-	Stainless Steel	Coat with Loosening Prevention Agent / Black Paint / N/A	One-Way Screw	0.5 ～ 1	Flat End

Preço regular (excluindo IVA):

0.33 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

- Volume Discount
REYHER
DIN 7500 Thread rolling screws
Hexagon socket head cap screws; Threadforming screws
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Standard 4 ～ 8 6 ～ 50 - Steel Zinc Plating Hex Socket - -
Preço regular (excluindo IVA):
0.09 €～
Data de envio regular:
3 dias úteis
Configurar
- DESCONTO
- Volume Discount
NABEYA BI-TECH
Tri-Wing Pan Head Screw _SRWS【1 a 20 unidades】
Cannot be fitted or removed with ordinary tools. For use tamper-proofing devices and equipment from dismantling or theft.
Ler mais
CAD:
2D
/3D
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Pan 3 ～ 5 6 ～ 16 - Stainless Steel N/A Tri-Wing 0.5 ～ 0.8 Flat End
Preço regular (excluindo IVA):
1.71 €～
Preço regular (excluindo IVA):
Preço especial
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar
- Volume Discount
SUNCO
One-Way Pan Head Screw【1 a 2000 unidades】
[Detailed shape] Pan[Mount hole shape] Flat slot[Basic shape] Other type[Material] SUS307J3 equivalent[Surface treatment] None[Screw ridge type] metal coarse type[Tip shape] Flat tip[Additional shapes] Standard[Usage] Standard[Thread type] Full-thread screw[Nominal screw length (M)] 3 4 5[Length (mm)] 6 8 10 12 16 20 35[Pitch (mm)] 0.5 0.7 0.8[Sale units] loose (can be individually purchased) box / pack
Ler mais
CAD:
2D
/3D
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Pan 3 ～ 5 6 ～ 35 - - N/A Flathead 0.5 ～ 0.8 Flat End
Preço regular (excluindo IVA):
0.67 €～
Data de envio regular:
6 dias úteis
Configurar
- DESCONTO
- Volume Discount
SAIMA CORPORATION
2-Hole Flat Head Tamper-Proof Screw
Can be used for decoration because a two-hole type is popular for design purposes.
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Disc 4 ～ 6 10 ～ 25 - Stainless Steel - Two-Hole 0.7 ～ 1 Flat End
Preço regular (excluindo IVA):
2.99 €～
Preço regular (excluindo IVA):
Preço especial
Data de envio regular:
Item em stock: 1 dia útil
Alguns artigos podem ser enviados no próprio dia
Configurar
- Volume Discount
SAIMA CORPORATION
Tamper-Proof Phillips Pan Head Screw with Pin
[Features]· With pin in center of Phillips head recess, and so ordinary Phillips screwdriver cannot be inserted.· Nylok lock machining also supported.
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
Pan 3 ～ 6 6 ～ 20 - Steel - Phillips Head 0.5 ～ 1 Flat End
Preço regular (excluindo IVA):
1.87 €～
Data de envio regular:
8 dias úteis
Configurar
- Volume Discount
SAIMA CORPORATION
Tamper-Proof Specialist Tool Driver with Magnet
Dropping down or loss is prevented due to magnet.[Features]· Driver with changeable bit.· Fixes bit with tip magnet.
Ler mais
Detailed Shape Nominal of Thread (M) Length L (mm)(mm) Length L (inch) Material Surface Treatment Mounting Hole Shape Pitch(mm) Tip Shape
- - - - - - Hex Socket - -
Preço regular (excluindo IVA):
44.27 €
Data de envio regular:
6 dias úteis
Configurar

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Standard	4 ～ 8	6 ～ 50	-	Steel	Zinc Plating	Hex Socket	-	-

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Pan	3 ～ 5	6 ～ 16	-	Stainless Steel	N/A	Tri-Wing	0.5 ～ 0.8	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Pan	3 ～ 5	6 ～ 35	-	-	N/A	Flathead	0.5 ～ 0.8	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Disc	4 ～ 6	10 ～ 25	-	Stainless Steel	-	Two-Hole	0.7 ～ 1	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Pan	3 ～ 6	6 ～ 20	-	Steel	-	Phillips Head	0.5 ～ 1	Flat End

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
-	-	-	-	-	-	Hex Socket	-	-

DESCONTO
Volume Discount

SUNCO

Pin in Hex Socket Head Button Screw【1 a 2000 unidades】

Due to pin at center of hex hole, a normal wrench is blocked. Ideal for dangerous locations, security sections, and protection of high-value equipment.

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Button	3 ～ 8	6 ～ 70	-	Stainless Steel	Copper Plating / Black Paint / N/A	Hex Socket	0.5 ～ 1.25	Flat End

Preço regular (excluindo IVA):

0.28 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

DESCONTO
Volume Discount

SUNCO

TRX Tamper-Proof Truss Machine Screw【1 a 4000 unidades】

[Material] Stainless steel[Surface treatment] None, non-chrome black, trivalent chromate, non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, black chromate, nickel plating, chromate plating, trivalent stainless steel coating, CU copper plating German, brown plating, black paint with matte black head paint, black paint, temper color (dark).

Ler mais

Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
Truss	2.6 ～ 8	3 ～ 40	-	Stainless Steel ～ Steel	Copper Plating / Black Paint / Temper Color / N/A / Non-Chrome / Trivalent Chromate / Bright Chromate Plating / Chromate Plating / Nickel Plating / Chrome Plated / Stainless Steel Coating	Hexalobuler Hole	0.45 ～ 1.25	Flat End