Tamper Proof Button Head Cap Screws (Screw Type: Full-Thread)

• 

  • Volume Discount

  MISUMI

  Button Head Cap Screws / Tamper Proof

  CAD:

  2D

  /3D

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	3 ～ 8	6 ～ 50	-	Stainless Steel	N/A	Hex Socket	0.5 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.61 €～

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NABEYA BI-TECH

  One-Way Pan Head Screw_SROS【1 a 20 unidades】

  [Features]· Can be installed with a normal flat head driver, but cannot be removed this way.· For use in device / equipment dismantling or theft prevention.· Use specialist tool SROT to remove.· Thread can be supplied cut to any length required.· Material / finish SUS304.

  Ler mais

  CAD:

  2D

  /3D

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Pan	3 ～ 5	5 ～ 25	-	Stainless Steel	N/A	One-Way Screw	0.5 ～ 0.8	Flat End

  Preço regular (excluindo IVA):

  2.73 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  SAIMA CORPORATION

  Tamper-Proof Screw Specialist Tool One-Way Screw Use Removal Tool

  [Features]· Dedicated unlocking tool for removal of one-way screws.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  -	-	-	-	-	-	One-Way Screw	-	-

  Preço regular (excluindo IVA):

  178.38 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  SAIMA CORPORATION

  Specialist Tool Bit for Tamper-Proof Screws Tricle Use Bit

  Available in 7 sizes, compatible with tamper proof TRF pin

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  -	-	-	-	-	-	Hexalobuler Hole	-	-

  Preço regular (excluindo IVA):

  33.02 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNCO

  TRX Flat Head Machine Screw【1 a 6000 unidades】

  [Material] Stainless steel[Surface treatment] None, non-chrome black, trivalent chromate, non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, black chromate, nickel plating, chrome plating, trivalent stainless steel coating, German brown plating, black paint

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Disc	2.5 ～ 8	4 ～ 45	-	Stainless Steel ～ Steel	Copper Plating / Black Paint / N/A / Non-Chrome / Trivalent Chromate / Bright Chromate Plating / Chromate Plating / Nickel Plating / Chrome Plated / Stainless Steel Coating	Hexalobuler Hole	0.45 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.05 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SAIMA CORPORATION

  System 5 Tamper-Proof Screw (5 Lobe)

  TRF (Tamper Resistant Fasteners) System 5 (Five) products. Please use it when you need a small size. -Heavy duty latching function, resistant to petrol/oil/grease/solvents. Lightweight, rustproof and excellent workability.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	2 ～ 2.6	3 ～ 20	-	Stainless Steel	-	Hexalobuler Hole	0.4 ～ 0.45	Flat End

  Preço regular (excluindo IVA):

  0.19 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NISSAN SCREW

  Hexalobular Bolt with Hole【1 a 1000 unidades】

  Made of steel and stainless steel, available in different sizes. -Fixing hole shape: Hexagonal hole - Thread type: Metric coarse - Basic shape: Standard (Round) - Tip shape: Flat tip.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Standard	3 ～ 12	5 ～ 45	-	Stainless Steel ～ Steel	-	Hexalobuler Hole	0.5 ～ 1.75	Flat End

  Preço regular (excluindo IVA):

  0.21 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  SAIMA CORPORATION

  Tamper-Proof One-Way Pan Head Screw

  [Features]· An ordinary flat-head driver can be used to tighten, and to remove use "One-way removal tool."· There is no recess at the head, and so dirt does not collect, so ideal for outdoor use.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Pan	3 ～ 6	5 ～ 40	-	Stainless Steel	-	One-Way Screw	0.5 ～ 1	Flat End

  Preço regular (excluindo IVA):

  0.44 €～

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNCO

  Pin in Hex Socket Head Button Screw【1 a 2000 unidades】

  Due to pin at center of hex hole, a normal wrench is blocked. Ideal for dangerous locations, security sections, and protection of high-value equipment.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	3 ～ 8	6 ～ 70	-	Stainless Steel	Copper Plating / Black Paint / N/A	Hex Socket	0.5 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.25 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNCO

  TRX Tamper-Proof Pan Head Screw【1 a 5000 unidades】

  [Material] Stainless steel[Surface treatment] None, non-chrome black, trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chrome plating, green chromate, black chromate, nickel plating, chrome plating, parker, trivalent stainless coating, copper CU plating, German brown plating, black paint, tempered color (dark)

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Pan	2 ～ 8	3 ～ 50	-	Stainless Steel ～ Steel	Copper Plating / Black Paint / Temper Color / N/A / Non-Chrome / Trivalent Chromate / Bright Chromate Plating / Chromate Plating / Nickel Plating / Chrome Plated / Parker / Stainless Steel Coating	Hexalobuler Hole	0.4 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.11 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NABEYA BI-TECH

  Tri-Wing Pan Head Screw _SRWS【1 a 20 unidades】

  Cannot be fitted or removed with ordinary tools. For use tamper-proofing devices and equipment from dismantling or theft.

  Ler mais

  CAD:

  2D

  /3D

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Pan	3 ～ 5	6 ～ 16	-	Stainless Steel	N/A	Tri-Wing	0.5 ～ 0.8	Flat End

  Preço regular (excluindo IVA):

  1.71 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SAIMA CORPORATION

  Tamper-Proof Triangular Recess Lock Button Bolt

  Triangular recess is employed.[Features]· Due to triangular recess, normal tools cannot be used to remove.· Fastening and removal possible with dedicated tool

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	3 ～ 6	6 ～ 25	-	Stainless Steel	-	Hexalobuler Hole	0.5 ～ 1	Flat End

  Preço regular (excluindo IVA):

  1.23 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SAIMA CORPORATION

  Tamper-Proof Pin / Button 6-Lobe Bolt

  [Features]· Due to pin at the center of the star-shaped hole, normal 6-lobe wrenches cannot be inserted.· Torque transmission is good, meaning that it will not come-away and that workability is excellent.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	3 ～ 10	6 ～ 70	-	Stainless Steel	-	Hexalobuler Hole	0.5 ～ 1.5	Flat End

  Preço regular (excluindo IVA):

  0.56 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SAIMA CORPORATION

  Tamper-Proof Screw Tricle Button Bolt

  Only type A products are offered. -Manipulation-proof screw - Shape of fixing hole: Triangular - Material: Stainless steel - Thread type: Metric coarse - Basic shape: Standard (Round) - Tip shape: Flat tip - Purchase unit: Available separately (can be purchased separately).

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	5 ～ 8	10 ～ 50	-	Stainless Steel	-	Hexalobuler Hole	0.8 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  3.04 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NISSAN SCREW

  Hexalobular Hex Socket Bolt

  Compared to hex holes, tightens even with shallow purchase, and compared to Phillips head tightens well in any situation, with greatly improved operability.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Standard	3 ～ 12	16 ～ 30	-	Steel	-	Hexalobuler Hole	0.5 ～ 1.75	Flat End

  Preço regular (excluindo IVA):

  0.16 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNCO

  Weld Bolt【1 a 2500 unidades】

  [Materials] stainless steel[Surface treatment] None, trivalent chromate, non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, black / white chromate

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Flat	4 ～ 12	8 ～ 60	-	Stainless Steel ～ Steel	N/A / Non-Chrome / Trivalent Chromate / Bright Chromate Plating / Chromate Plating	N/A	0.7 ～ 1.75	Flat End

  Preço regular (excluindo IVA):

  0.26 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NISSAN SCREW

  Hexalobular Button Bolt with Hole【1 a 1000 unidades】

  [Material] Stainless steel[Surface treatment] None, trivalent chromate, trivalent black, trivalent white, bright chromate plating, chromate plating, black chromate, nickel plating

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	3 ～ 12	5 ～ 50	-	Stainless Steel ～ Steel	-	Hexalobuler Hole	0.5 ～ 1.75	Flat End

  Preço regular (excluindo IVA):

  0.16 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SAIMA CORPORATION

  5-Lobe Tamper-Proof Screw (Petal)

  As a pin stands at center of 5-lobe socket, ordinary tools cannot be used to remove.[Features]· As a pin stands at center of 5-lobe socket, ordinary tools cannot be used to remove.· Fastening and removal possible with dedicated tool

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	3 ～ 8	6 ～ 60	-	Stainless Steel	-	-	0.5 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  1.34 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  SAIMA CORPORATION

  Specialist Tool Bit for Tamper-Proof Screws 6 Lobe Use Bit

  TRF dedicated tool, 6-lobe bit, sold loose (can be purchased from 1pc) [Mounting hole shape] hexalobular hole

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  -	-	-	-	-	-	Hexalobuler Hole	-	-

  Preço regular (excluindo IVA):

  12.85 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNCO

  TRX Tamper-Proof Flat Head Machine Screw【1 a 6000 unidades】

  [Material] Stainless steel[Surface treatment] None, non-chrome black, trivalent chromate, non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, black chromate, nickel plating, chrome plating, trivalent stainless steel coating, German brown plating, black paint, temper color (dark)

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Disc	2.6 ～ 8	4 ～ 55	-	Stainless Steel ～ Steel	Copper Plating / Black Paint / Temper Color / N/A / Non-Chrome / Trivalent Chromate / Bright Chromate Plating / Chromate Plating / Nickel Plating / Chrome Plated / Stainless Steel Coating	Hexalobuler Hole	0.45 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.11 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NABEYA BI-TECH

  2-Hole Pan Head Screw_SRTS【1 a 20 unidades】

  2-hole pan head screw. With excellent design, can also be used decoratively.[Features]· Pan head screw with 2 holes.· Excellent design.· Can also be used decoratively.· Cannot be fastened or removed with ordinary tools.· For use in device / equipment dismantling or theft prevention.· Specialist bit for fixing and removing SRTB for use with magnetic driver SRD.· Thread can be supplied cut to any length required.· Material / finish SUS304

  Ler mais

  CAD:

  2D

  /3D

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Pan	3 ～ 5	6 ～ 20	-	Stainless Steel	N/A	Two-Hole	0.5 ～ 0.8	Flat End

  Preço regular (excluindo IVA):

  2.10 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SAIMA CORPORATION

  Tamper-Proof Tri-Wing Pan Head Screw

  [Features]· A Phillips or flat-head driver will not engage in the triangular hole.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Pan	3 ～ 8	6 ～ 50	-	Stainless Steel	-	Tri-Wing	0.5 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.48 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  SAIMA CORPORATION

  Tamper-Proof Screw Specialist Tool Triangular Recess Lock Use Bit

  Available in 4 sizes, tamper-proof Fujiyama Lock. TRF-compatible bit

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  -	-	-	-	-	-	Hexalobuler Hole	-	-

  Preço regular (excluindo IVA):

  33.02 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SAIMA CORPORATION

  Slim Head / Six Lobe Screw

  Suitable for places where countersunk screws cannot be used in thin panel fixings. Even when tightened to the same torque as a general screw (equivalent to strength class 4.8), the head will not fly off or break. You can use it as a substitute for machine screws.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Ultra Low Head	2 ～ 6	3 ～ 40	-	Stainless Steel ～ Steel	-	Hexalobuler Hole	0.4 ～ 1	Flat End

  Preço regular (excluindo IVA):

  0.25 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NISSAN SCREW

  Flat Head Bolt with Hexalobular Socket, New JIS【1 a 500 unidades】

  [Material] Stainless steel[Surface treatment] None, bright chromate plating, chromate plating.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Disc	6 ～ 8	10 ～ 40	-	Stainless Steel ～ Steel	-	Hexalobuler Hole	1 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.36 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NABEYA BI-TECH

  NBK Hexalobular Socket Head Cap Screws With Low Profile SLTS【1 a 50 unidades】

  ● Low-profile hexalobular socket head cap screws. ● For helping make equipment and devices smaller, or for use in areas with limited overhead space. ● Hexalobular socket holes are designed to withstand high tightening torque.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Low Head	2 ～ 6	4 ～ 30	-	Stainless Steel	N/A	Hexalobuler Hole	0.4 ～ 1	Flat End

  Preço regular (excluindo IVA):

  1.85 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNCO

  TRF / Tamper-Proof Screw, Stainless Steel Pin, Small Plate Hexagonal Hole Screw【1 a 100 unidades】

  [Nominal] 3 4 5 6 8[Material] Stainless Steel[Surface Processing] None / Loosening Prevention Coating / Black Coating

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Disc	3 ～ 8	6 ～ 50	-	Stainless Steel	Coat with Loosening Prevention Agent / Black Paint / N/A	Hex Socket	0.5 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.95 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNCO

  TRF / Tamper-Proof Screw, Stainless Steel, One Sided, Small Pot Screw【1 a 100 unidades】

  [Nominal] 3 4 5 6[Material] Stainless Steel[Surface Processing] None / Loosening Prevention Coating / Black Coating

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Pan	3 ～ 6	5 ～ 40	-	Stainless Steel	Coat with Loosening Prevention Agent / Black Paint / N/A	One-Way Screw	0.5 ～ 1	Flat End

  Preço regular (excluindo IVA):

  0.33 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNCO

  Slotted Fillister Head Screw【1 a 8000 unidades】

  [Materials]SWCH equivalent SUS307J3 equivalent, brass[Surface treatment] None, non-chrome plating white, trivalent chromate plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, bright chromate, nickel plating, trivalent stainless coating.

  Ler mais

  CAD:

  2D

  /3D

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Flat	1 ～ 8	2 ～ 50	-	Brass	N/A / Non-Chrome / Trivalent Chromate / Bright Chromate Plating / Chromate Plating / Nickel Plating / Stainless Steel Coating	Flathead	0.25 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.33 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SAIMA CORPORATION

  Tamper-Proof Pin / Hex Hole Button Bolt

  Excellent torque transmission during tightening.[Features]· Due to pin at center of the hex hole, normal hex wrenches are blocked.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	3 ～ 12	6 ～ 100	-	Stainless Steel	-	Hex Socket	0.5 ～ 1.75	Flat End

  Preço regular (excluindo IVA):

  0.44 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  SAIMA CORPORATION

  Specialist Tool Bit for Tamper-Proof Screws Tri-Wing Use Bit

  Tricle TRF Supporting specialist bit

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  -	-	-	-	-	-	Tri-Wing	-	-

  Preço regular (excluindo IVA):

  15.08 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  SAIMA CORPORATION

  Specialist Tool for Tamper-Proof Screws System 5 Specialist Bit

  Available in 2 sizes, tamper-proof, System 5 TRF-compatible bit.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  -	-	-	-	-	-	Hexalobuler Hole	-	-

  Preço regular (excluindo IVA):

  36.20 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  • Volume Discount

  SUNCO

  TRF / Tamper-Proof Screw, Stainless Steel Pin, Small Button Hexagonal Hole Screw【1 a 100 unidades】

  [Nominal] 3 4 5 6 8 10 12[Material] Stainless Steel[Surface Processing] None / Loosening Prevention Coating / Black Coating

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	3 ～ 12	2 ～ 60	-	Stainless Steel	Black Paint / N/A	Hex Socket	0.5 ～ 1.75	Flat End

  Preço regular (excluindo IVA):

  0.82 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNCO

  TRX / Tamper-Proof Screw, Stainless Steel Try Wing, Small Plate Screw【1 a 100 unidades】

  [Nominal] 3 4 5 6 8[Material] Stainless Steel[Surface Processing] None / Loosening Prevention Coating / Black Coating

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Disc	3 ～ 8	6 ～ 50	-	Stainless Steel	Coat with Loosening Prevention Agent / Black Paint / N/A	Tri-Wing	0.5 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.86 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NABEYA BI-TECH

  Button Bolt with Hex Socket Head (with Pin)_SRHS【1 a 20 unidades】

  Button bolt with pin at center of hex hole. Cannot be fitted or removed with ordinary tools. For use tamper-proofing devices and equipment from dismantling or theft.

  Ler mais

  CAD:

  2D

  /3D

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	3 ～ 6	6 ～ 25	-	Stainless Steel	N/A	Hex Socket	0.5 ～ 1	Flat End

  Preço regular (excluindo IVA):

  1.49 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NABEYA BI-TECH

  Button Bolt with Hexalobuler Hole (with Pin)_SRBS【1 a 20 unidades】

  Button bolt with pin in center of hexalobuler hole. Cannot be fitted or removed with ordinary tools. For use tamper-proofing devices and equipment from dismantling or theft.

  Ler mais

  CAD:

  2D

  /3D

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Button	3 ～ 8	6 ～ 50	-	Stainless Steel	N/A	Hexalobuler Hole	0.5 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  1.49 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  SUNCO

  One-Way Pan Head Screw【1 a 2000 unidades】

  [Detailed shape] Pan[Mount hole shape] Flat slot[Basic shape] Other type[Material] SUS307J3 equivalent[Surface treatment] None[Screw ridge type] metal coarse type[Tip shape] Flat tip[Additional shapes] Standard[Usage] Standard[Thread type] Full-thread screw[Nominal screw length (M)] 3 4 5[Length (mm)] 6 8 10 12 16 20 35[Pitch (mm)] 0.5 0.7 0.8[Sale units] loose (can be individually purchased) box / pack

  Ler mais

  CAD:

  2D

  /3D

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Pan	3 ～ 5	6 ～ 35	-	-	N/A	Flathead	0.5 ～ 0.8	Flat End

  Preço regular (excluindo IVA):

  0.61 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SAIMA CORPORATION

  Tamper Proof Pin / Countersink Hex Hole Bolt

  Excellent torque transmission during tightening.[Features]· Due to pin at center of the hex hole, normal hex wrenches are blocked.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Disc	3 ～ 8	6 ～ 60	-	Stainless Steel	-	Hex Socket	0.5 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  1.00 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SAIMA CORPORATION

  Tamper-Proof Tri-Wing Countersink Screw

  [Features]· A Phillips or flat-head driver will not engage in the triangular hole.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Disc	3 ～ 8	6 ～ 50	-	Stainless Steel	-	Tri-Wing	0.5 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  1.00 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  SAIMA CORPORATION

  Tamper-Proof Phillips Pan Head Screw with Pin

  [Features]· With pin in center of Phillips head recess, and so ordinary Phillips screwdriver cannot be inserted.· Nylok lock machining also supported.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Pan	3 ～ 6	6 ～ 20	-	Steel	-	Phillips Head	0.5 ～ 1	Flat End

  Preço regular (excluindo IVA):

  1.87 €～

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SAIMA CORPORATION

  Specialist Tool Bit for Tamper-Proof Screws 6 Lobe Use L-Type Wrench

  Special tool, L-shaped key for 6-lobes [Shape of mounting hole] hexalobular hole, RoHS10 compliant.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  -	-	-	-	-	-	Hexalobuler Hole	-	-

  Preço regular (excluindo IVA):

  9.30 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  SAIMA CORPORATION

  Tamper-Proof Specialist Tool Driver with Magnet

  Dropping down or loss is prevented due to magnet.[Features]· Driver with changeable bit.· Fixes bit with tip magnet.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  -	-	-	-	-	-	Hex Socket	-	-

  Preço regular (excluindo IVA):

  44.27 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NISSAN SCREW

  Hexalobular Flat Head Bolt with Hole

  Compared to hex holes, tightens even with shallow purchase, and compared to Phillips head tightens well in any situation.

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Disc	3 ～ 8	6 ～ 35	-	Steel	-	Hexalobuler Hole	0.5 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.12 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNCO

  TRX Pan Head Screw【1 a 10000 unidades】

  [Material] Stainless steel[Surface treatment] None, non-chrome black, trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, bright chromate plating, chromate plating, black chromate, nickel plating, chrome plating, trivalent stainless steel coating, coating locking agent (ALOK), black paint

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Pan	2 ～ 6	4 ～ 30	-	Stainless Steel ～ Steel	Coat with Loosening Prevention Agent / Black Paint / N/A / Non-Chrome / Trivalent Chromate / Bright Chromate Plating / Chromate Plating / Nickel Plating / Chrome Plated / Stainless Steel Coating	Hexalobuler Hole	0.4 ～ 1	Flat End

  Preço regular (excluindo IVA):

  0.06 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  SUNCO

  TRX Truss Machine Screw【1 a 2000 unidades】

  [Material] Stainless steel[Surface treatment] None, non-chrome black, trivalent chromate, non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, black chromate, nickel plating, chrome plating, trivalent stainless steel coating, German brown plating, black paint

  Ler mais

  Detailed Shape	Nominal of Thread (M)	Length L (mm)(mm)	Length L (inch)	Material	Surface Treatment	Mounting Hole Shape	Pitch(mm)	Tip Shape
  Truss	3 ～ 8	6 ～ 40	-	Stainless Steel ～ Steel	Copper Plating / Black Paint / N/A / Non-Chrome / Trivalent Chromate / Bright Chromate Plating / Chromate Plating / Nickel Plating / Chrome Plated / Stainless Steel Coating	Hexalobuler Hole	0.5 ～ 1.25	Flat End

  Preço regular (excluindo IVA):

  0.25 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar