Screw plugs (metric, imperial)（Mounting Hole Shape：Hex Socket）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Threaded plugs
GANTER
The gaskets in types AC and AA correspond to the gaskets DIN 7603, type A (flat gaskets).- Volume Discount
Configure nowStarting from∗ ： 0.32 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Threaded plugs, Steel
GANTER
The dimensions of the threaded plugs GN 749 comply with DIN 908, but deviating from the latter is the elastic sealing ring (rubber). This sealling ring is retained in a radial undercut in the mating face which prevents it from dropping out and in particular it does not extrude when the plug is tightened.
The details relating to the permissible opreating pressure are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.12 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hex Socket Head Taper Plug (Sink)【1-1,000 Pieces Per Package】
SUNCO
Seal by screwing in the female taper pipe screw. At that time the standard diameter is set so that the end is nearly flush with the mounting surface.- Volume Discount
Configure nowStarting from∗ ： 0.38 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hex Socket Screw Plug With Flange_SFM / SFMS
NABEYA BI-TECH
O-ring included. Since it is a parallel screw, there is no distortion of the female screw side material as when tapered screws are tightened. Appropriate for applications requiring a large amount of mounting/detaching such as with hydraulic equipment, pneumatic equipment, etc.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5.87 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hex Socket Head Taper Plug, GJ Type【1-500 Pieces Per Package】
GOSHO WORKS
Taper plug usable in high pressure (high airtightness) conditions developed for reliability.
[Features]
· The GJ type plug is referred to as a "float type" (JIS type), so when it is screwed into the PT or PS female thread specified in JISB0203, the standard diameter of the taper thread is established near the center of the length (I) so that the large end service is higher than the mounting surface.
· Conventionally, a PT plug with a square hole is specified by JIS in place of a hex hole for the GJ type, but recently in order to improve the safety and work efficiency of tightening, hex socket head GJ plugs capable of reliable tightening have come to be used in various quarters.- Volume Discount
Configure nowStarting from∗ ： 0.82 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Taper Thread Plug, Sink, NPT (for American Pipes)
SUNCO
[Shape] Standard
[Mount hole shape] Hex hole
[Material] Stainless steel
[Surface treatment] Untreated plug
[Type] Sink plug
[Sales unit] Discrete (can be purchased single units) nominal thread designation (NPT/NPTF) 1/16 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
[Length (mm)] 6 7 9 10 12 14- Volume Discount
Configure nowStarting from∗ ： 6.61 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Lock Screw Type 3 Short Type
OHKITA
A set screw for press dies.
Using together with Type 1 achieves a synergistic locking effect.
Short type (thin).
Can be used when the plate is thin.
Can be purchased individually.
Material = S45C
Hardness = HRC 34-44
Surface processing: Black oxide- Volume Discount
Configure nowStarting from∗ ： 1.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Flange Hex Socket Head Screwed Plug _SPN-H
NABEYA BI-TECH
Screw plug with high hydraulic specifications. Metric fine thread and pipe parallel thread are standardized.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 6.09 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lock Screw Type 1
OHKITA
A set screw for press dies.
Standard type.
Can be purchased individually.
Material = SCM435 (M3 to M12), S45C (M14 and above)
Hardness = HRC 45-53 (M3-M10), HRC 34-44 (M12 or more)
Surface processing: Black oxide / temper color- Volume Discount
Configure nowStarting from∗ ： 0.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hex Socket Head Screwed Plug _SFP【1-10 Pieces Per Package】
NABEYA BI-TECH
Use for compressed spring retention or spring load reduction applications.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hex Socket Head Taper Thread Plug (Float)【1-700 Pieces Per Package】
SUNCO
[Material] Steel, stainless steel SUS316L Stainless steel
[Surface treatment] chromate, trivalent chromate (trivalent white), nickel plating, bright chromate, black oxide film- Volume Discount
- Stock
Configure nowStarting from∗ ： 0.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hex Socket Head Taper Plug, Sink Type, B Type【1-100 Pieces Per Package】
NISSAN SCREW
The reference diameter position is closer to the upper surface of the plug than the JIS R thread and becomes flush with the female thread member when tightened. For general hydraulic pressure equipment. Hardness 32 to 42HRC product.- Volume Discount
Configure nowStarting from∗ ： 0.48 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plastic Hex Socket Head Taper Plug
SUNCO
Seal by screwing in the female taper pipe screw. At that time the standard diameter is set so that the end is nearly flush with the mounting surface.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 7.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
GOSHO Plug (GD)【1-300 Pieces Per Package】
GOSHO WORKS
[Features]
· The GD type plug is a general dry seal type plug with a standard diameter position based on the American standard dry seal pipe thread (NPTF) standardized in ANSIB2.2.
· GoshoGD series is a dry-seal type hex socket plug that uses NPTF to provide strength even without using glue, and features excellent durability and long-lasting performance.- Volume Discount
Configure nowStarting from∗ ： 0.71 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
PEEK (Polyetheretherketone) Taper Plug
NIPPON CHEMICAL SCREW
[Shape] Standard
[Mount hole shape] Hex hole
[Material] PEEK
[Surface treatment] None nominal thread designation (R) 1/8 1/4 3/8
[Length (mm)] 8 11 12- Volume Discount
Configure nowStarting from∗ ： 3.44 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hex Socket Head Taper Plug, Sink Type, DB Type
NISSAN SCREW
Requires no sealant, and becomes flush with the female thread member when tightened. For overseas partner products, hydraulic equipment or automobiles.- Volume Discount
Configure nowStarting from∗ ： 0.82 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hex Socket Head Taper Plug, Sink Type, NB Type
NISSAN SCREW
The reference diameter position is closer to the upper surface of the plug than the JIS R thread and becomes flush with the female thread member when tightened. For general hydraulic pressure equipment.- Volume Discount
Configure nowStarting from∗ ： 0.30 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Plug (NPTF (Sink (DB)))【1-100 Pieces Per Package】
NISSAN SCREW
[Shape] Standard
[Mount hole shape] Hex hole
[Material] Alloy steel for structures
[Surface treatment] Black oxide film plug
[Type] Sink plug nominal thread designation (NPT/NPTF) 1/16 1/8 1/4 3/8 1/2
[Length] ±0.4 (mm) 6.35 10.3 13.5
[Sales unit] Discrete (can be purchased single units)- Volume Discount
Configure nowStarting from∗ ： 0.72 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
GOSHO Plug (JOHS)
GOSHO WORKS
[Features]
· The JOHS type further improves on the GPF. It is a series for use in high pressure upgraded to up to 500kgf/cm².
· Highly reliable plug that offers optimal safety for hydraulic machinery requiring high pressurization and compactification.- Volume Discount
Configure nowStarting from∗ ： 3.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Taper Sink Plug【14 Pieces Per Package】
TRUSCO NAKAYAMA
Feature
· Stopper for piping.
Applications
· General hydraulic equipment.- Volume Discount
Configure nowStarting from∗ ： 11.41 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Flange Hex Socket Head Screwed Plug _SPN-L
NABEYA BI-TECH
Screw plug with high hydraulic specifications. Metric fine thread and pipe parallel thread are standardized.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 4.60 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hex Socket Screw Plug With Flange_SFF
NABEYA BI-TECH
Can be used for high hydraulic pressure applications up to a dynamic pressure of 49 MPa. For increased pressure, improved compactness and safety in hydraulic equipment.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2.99 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hex Socket Head Taper Plug, Float Type, A Type【1-1,000 Pieces Per Package】
NISSAN SCREW
Depending on the position of the reference diameter, there are two types: the sinking type and the floating type. [Features]They are used for sealing in areas such as hydraulic systems, pneumatic systems, pumps and automobiles.- Volume Discount
Configure nowStarting from∗ ： 0.29 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
GOSHO (GM)【1-500 Pieces Per Package】
GOSHO WORKS
[Features]
· The GM type plug is a level seal type (flush type) developed by Gosho. When the plug is screwed into PT (pipe taper) female threading specified in JISB0203, a reference diameter is established near the large end face so that its large end face is almost flush with the mounting face.
· It recently has become the indispensable primary plug for hydraulic and pneumatic equipment.
· It has the advantages of a GM type plug and is a level seal type, so it becomes flush with the embedded and installed main body for a pleasing external appearance and also facilitates miniaturization of machinery
· Comes with a tightening interference, which enables substantial tightening, allowing it to withstand great internal pressure.
· The plug is subject to cold plastic working for high precision, and is heat processed to allow it to be used under high pressure.- Volume Discount
Configure nowStarting from∗ ： 0.49 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
NS Flange Plug
NISSAN SCREW
The use of O-rings guarantees excellent tightness. Material: Steel / Surface treatment: Black oxide coating.- Volume Discount
Configure nowStarting from∗ ： 2.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Configure nowStarting from∗ ： 0.76 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 3.42 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 0.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Shape |
| Mounting Hole Shape |
| Nominal of Thread (M) |
| Nominal of Thread (R) |
| Nominal of Thread (G) |
| Nominal of Thread (NPT/NPTF) |
| Length(mm) |
| Material |
| Surface Treatment |
| Plug Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | SUNCO | NABEYA BI-TECH | GOSHO WORKS | SUNCO | OHKITA | NABEYA BI-TECH | OHKITA | NABEYA BI-TECH | SUNCO | NISSAN SCREW | SUNCO | GOSHO WORKS | NIPPON CHEMICAL SCREW | NISSAN SCREW | NISSAN SCREW | NISSAN SCREW | GOSHO WORKS | TRUSCO NAKAYAMA | NABEYA BI-TECH | NABEYA BI-TECH | NISSAN SCREW | GOSHO WORKS | NISSAN SCREW | GOSHO WORKS | GOSHO WORKS | SUNCO |
| Product Series | Hex Socket Head Taper Plug (Sink)【1-1,000 Pieces Per Package】 | Hex Socket Head Taper Plug, GJ Type【1-500 Pieces Per Package】 | Hex Socket Head Taper Thread Plug (Float)【1-700 Pieces Per Package】 | Hex Socket Head Taper Plug, Sink Type, B Type【1-100 Pieces Per Package】 | Hex Socket Head Taper Plug, Float Type, A Type【1-1,000 Pieces Per Package】 | |||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| |||||||||||||||||||||
| Starting from∗ | 0.32 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 1.12 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.38 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 5.87 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.82 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 6.61 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 1.26 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 6.09 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.30 € *Unit price with basic configuration Volume Discount | 3.44 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.33 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.48 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 7.13 € *Unit price with basic configuration Volume Discount | 0.71 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 3.44 € *Unit price with basic configuration Volume Discount | 0.82 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.30 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.72 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 3.45 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 11.41 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 4.60 € *Unit price with basic configuration Volume Discount | 2.99 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.29 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.49 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 2.94 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.76 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 3.42 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.78 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 6 Days | Same day | 5 Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 6 Days |
| Specifications |
| |||||||||||||||||||||||||||
| Shape | Flanged | Flanged | Standard | Flanged | Standard | Standard | Standard | Flanged | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Flanged | Standard | Flanged | Flanged | Standard | Standard | Flanged | Standard | Flanged | Standard |
| Mounting Hole Shape | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket | Hex Socket |
| Nominal of Thread (M) | 8 ～ 48 | 8 ～ 48 | - | 5 ～ 27 | - | - | 8 ～ 33 | 10 ～ 48 | 3 ～ 68 | 12 ～ 36 | - | - | - | - | - | - | - | - | - | - | 10 ～ 48 | - | - | - | - | - | - | - |
| Nominal of Thread (R) | - | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | - | - | - | - | 1 ～ 3/8 | 1 ～ 3/8 | 1/4 ～ 3/8 | - | 1/8 ～ 3/8 | - | 1 ～ 3/8 | - | - | - | - | - | 1 ～ 3/8 | 1 ～ 3/8 | - | - | - | 1/4 ～ 3/8 |
| Nominal of Thread (G) | 1 ～ 3/8 | 1 ～ 3/8 | - | - | - | - | - | 1 ～ 3/8 | - | - | - | - | - | - | - | - | - | - | 1/4 ～ 1/8 | - | 1 ～ 3/8 | 1 ～ 3/8 | - | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - |
| Nominal of Thread (NPT/NPTF) | - | - | - | - | - | 1 ～ 3/8 | - | - | - | - | - | - | - | 1 ～ 3/8 | - | 1/2 ～ 3/8 | - | 1/2 ～ 3/8 | - | 1/4 | - | - | - | - | - | 1 ～ 3/8 | - | - |
| Length(mm) | 8 ～ 16 | - | 6 ～ 22 | 6.5 ～ 16 | 8 ～ 26 | 6 ～ 22 | 6 ～ 8 | 8 ～ 16 | 3 ～ 25 | 10 ～ 18 | 7 ～ 24 | 6 ～ 16.5 | 8 ～ 12 | 7.9 ～ 19.6 | 8 ～ 12 | 6.35 ～ 13.5 | 6 ～ 19 | 6.35 ～ 13.5 | 10 ～ 12 | 10 | 8 ～ 16 | 10 ～ 21 | 7 ～ 19 | 6 ～ 22 | 10 ～ 20 | 6.35 ～ 16.7 | 8 ～ 20 | 7 ～ 10 |
| Material | Steel | Steel | Stainless Steel ～ Steel | Steel | Stainless Steel ～ Steel | Stainless Steel | Steel | Steel | Steel | Steel | Stainless Steel ～ Steel | Steel | Plastic | Stainless Steel ～ Steel | Plastic | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Steel | Stainless Steel ～ Steel | Steel | Stainless Steel ～ Steel | Steel | Steel |
| Surface Treatment | - | - | Chromate ～ Not Provided | Black Oxide ～ Not Provided | Not Provided ～ Tempered Collar | Not Provided | Black Oxide | Chromate | Black Oxide | Black Oxide | Chromate ～ Not Provided | Black Oxide ～ Chromate | Not Provided | Not Provided | Not Provided | Black Oxide | Black Oxide | - | - | - | Chromate | Black Oxide | Barrel, Passivation ～ Black Oxide | Bright Chrome Plating ～ Not Provided | - | Nickel Plating ～ Not Provided | - | Not Provided |
| Plug Type | - | - | Sunk Head Plug | - | Floating Plug | Sunk Head Plug | - | - | - | - | Floating Plug | Sunk Head Plug | Sunk Head Plug | Floating Plug | - | Sunk Head Plug | Sunk Head Plug | Sunk Head Plug | - | Sunk Head Plug | - | - | Floating Plug | Sunk Head Plug | - | Sunk Head Plug | - | Sunk Head Plug |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Shape
- Standard
- Flanged
- Square Head
-
Mounting Hole Shape
- Hex Socket
- Hex Socket (Through)
- No Screw Hole
-
Nominal of Thread (M)
-
Nominal of Thread (R)
-
Nominal of Thread (G)
-
Nominal of Thread (NPT/NPTF)
-
Length(mm)
-
Material
-
Surface Treatment
-
Plug Type
- Floating Plug
- Sunk Head Plug
Brand
-
- MISUMI (0)
- GOSHO WORKS (6)
- NISSAN SCREW (6)
- NABEYA BI-TECH (5)
- SUNCO (5)
- GANTER (2)
- OHKITA (2)
- NIPPON CHEMICAL SCREW (1)
- TRUSCO NAKAYAMA (1)
- NORELEM (0)
- KIPP (0)
- FESTO (0)
- PHOENIX CONTACT (0)
- SAKAMURA (0)
- REYHER (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw plugs (metric, imperial)
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.