Bearing housings / block shape / internal thread / circlip / deep groove ball bearing / material selectable / coating selectable

Click on this image to zoom in.

Promotional pricing
Volume Discount

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Bearings with Housing

Technical Drawing - Bearings with Housing

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Bearings with Housing

Type		Material		Surface Treatment	Accessory
h Selectable	h Configurable	Bearing	Housing	Housing	Retaining Ring
BGBKB	BGBFB	Steel	EN 1.1191 Equiv.	Black Oxide	Spring Steel
BGBK	BGBF		EN 1.1191 Equiv.	Electroless Nickel Plating	EN 1.4301 Equiv.
BGBKA	BGBFA		2000 Aluminum Alloy	Clear Anodize
BGBKSA	BGBFSA	Stainless Steel	2000 Aluminum Alloy	Clear Anodize
BGBKS	BGBFS	Stainless Steel	EN 1.4301 Equiv.	-

* Bearings with Rubber Seals (VV and DD) are all made of steel.

Further specifications can be found under the tab More information.
Information about tolerances can be found under ball bearing table / tolerances as PDF

Composition of a Product Code - Bearings with Housing

Part Number			-	h

Type	Bearing	Seal
BGBK BGBFS	6000 6204	VV ZZ	- -	30 55

Note: the bearing number used is included in the bearing housing part number.

Alterations - Bearings with Housing

Bottom Mount/Retained:Related Image

General Information - Bearings with Housing

Bearing housing assortment - flange bearing - pedestal bearing T-shape - pedestal bearing L-shape - flange bearing housing - bearing housing straight - bearing with housing

Bearings with Housing/Bearing Housings/Bearing Units Selection Details

- Housing material: aluminum, steel, stainless steel

- Coatings: uncoated, burnished, anodized, nickel-plated

- Ball bearing material: steel, stainless steel

- ISO tolerances: Ball bearing table/tolerances available as PDF

- bearing housing types: round flange, square flange, compact flange, guide flange, T-shape, L-shape, block shape

- Ball bearing types: deep groove ball bearings, angular ball bearings

- Inner diameter: from 3 mm to 50 mm

The variety of bearing housings can be found in the Overview of the Types of Pedestal Bearings available as a PDF.

The different designs of the flange bearings can be found in the Overview of the Types of Flange Bearing Housing available as PDF.

Description/Basics

Bearing housings are highly robust and allow for easy and quick assembly. They are used to accommodate rotating machine elements in mechanical engineering. The housing bearings are generally provided for receiving rotary shafts or torsional shafts. Bearing housing types include pedestal bearings, flange bearings, tension bearings, and pillow blocks. They can be fitted with simple ball bearings. However, there are bearing housings in which angular contact ball bearings are installed that can also absorb axial forces. Housing bearings are available with single-row, double-row and three-row deep-groove ball bearings or angular contact ball bearings. The different designs of the bearing housings can be used horizontally or vertically. For horizontal mounting, MISUMI offers bearing housings as a vertical pedestal bearing in L- and T-shape, as well as a square bearing block. Flange bearing housings, also called flange bearings, are often used for vertical mounting. A bearing unit from MISUMI, whether a pedestal bearing or a flange bearing, is available in double or triple bearings (with rolling bearings) to absorb any lever forces.
The ball bearings are secured in the bearing housings with retaining rings or bearing covers. The bearing can thus be replaced as needed.

Two-row and multi-row bearing housings

Multi-row bearing housings are well-suited for applications subjected to lever forces. They can contribute to increased rotational stability as a flange bearing housing or a pedestal bearing housing.
The flange bearing with angular ball bearing and screwed bearing cover can be used as a fixed bearing. In this case, a floating bearing is recommended in the assembly group.
The combination of fixed and floating bearings can ensure length compensation. This prevents an undesirable compression of a shaft or a threaded drive. A compression can create an imbalance and thus vibrations in an application and lead to inaccuracy

Example of double row flange bearing - three row flange bearing - flange bearing housing with grooved ball bearing - flange bearing housing with angular ball bearing - bearing with housing

Example – multi-row bearing housing – (1) deep groove ball bearing, (2) flange bearing housing, (3) bearing cover, (4) bearing cover screw, (5) angular ball bearing, (6) spacer sleeve, (7) spacer sleeve for inner ring

Ball bearing seals for bearing housings

ZZ (2Z): double encapsulated
VV (2RZ): contactless rubber seal
DD (2RS): contact rubber seal (slightly increased friction)

Areas of Application

MISUMI’s bearing housings, flange bearings and pedestal bearings can be used in almost all applications. Bearing housings are often used as flange bearings or pedestal bearings for the bearing of ball screws and rotary shafts. In addition, they are often found in conveyor belts, or in the bearings of shafts in timing belts, as well as chain transmission. As a fixed and floating bearing, the bearing units can withstand high loads and speeds of rotation. In addition, the encapsulated or sealed bearings are protected from external influences.

Materials

Bearing unit housings are available in steel, stainless steel, and aluminum. Due to the alterations of selecting the ball bearings, a pedestal bearing housing or flange bearing housing can consist of various types of materials. The bearing housings are optionally installed with steel or stainless steel ball bearings. In addition, a bearing housing that can be used as a fixed bearing can additionally be provided on the bearing housing with a rubber seal.

Coatings

MISUMI’s pedestal bearings and flange bearings made of steel can be optionally burnished, painted, chemically nickel-plated. The aluminum bearing housings can be anodized to provide the best possible protection against corrosion depending on the need or the environmental conditions.

Dimensions

Types of pedestal bearings

Shape	Mounting method	Features
T-shape (extruded)		- economically extruded housing - up to 30% less expensive than milled housings - higher security thanks to rounded corners
T-shape		- stable despite its narrow design - available for high positioning accuracy with groove - optionally with lubricant for low particle formation
L-shape		- Low width
Block shape (internal thread)		- Fastened from underneath through the internal thread - Compact design for limited installation space
Block shape		- Low assembly height
Straight		- Fastening from the front - Compact design for limited installation space - Offset design with height accuracy +/- 0.02 mm

Table – Application of pedestal bearings

Flange bearing designs

Ball bearing	Design	utilisation
Easy		- Can be used at several shaft positions - Space-saving version available with small diameter
Easy	With centering collar	- Often used to secure multiple locations - The centering collar can be used for positioning
Double		- Suitable for heavy loads - Additional support of the shaft - Length freely selectable
Double	With centering collar	- Suitable for heavy loads - The centering collar can be used for positioning - Length freely selectable

Table – Flange Bearing Application

Instructions for Use / Installation Information - Bearings with Housing

Installation Information

When assembling bearing housings, care must be taken to ensure that they are installed without tension to prevent vibration, noise and damage. The holes or threads on the mounting surface should therefore be positioned as accurately as possible to prevent stresses on the shaft or spindle. In addition, dowel pins in the base plate can be a helpful option. Also, when installing the bearing housings, make sure that the contact surfaces are clean.
In addition, MISUMI offers special types of bearing housings, which have a positioning groove on the underside to predetermine a precise alignment.

Bearing housing assembly with dowel pin - bearing housing assembly with keyway - pedestal bearing positioning - pedestal bearing housing assembly

Application example – pedestal bearing mounting with dowel pin, pedestal bearing mounting with keyway, (1) dowel pin

The alteration [NA] allows for the bearing housings and ball bearings not to be delivered pre-assembled. This can significantly simplify assembly depending on the assembly procedure.
In some variants with angular contact bearings, the bearings must be greased during assembly.

Flange bearing housing with female thread

MISUMI offers another special form with the flange bearing with female thread. This flange bearing has the advantage that it can be mounted from the front and the rear. This flange bearing housing provides high mounting flexibility and the ability to standardize and reduce the variety of bearing housings.

Female threaded bearing housing - flange-type female threaded bearing housing - flange-type and female threaded bearing

Application example – (1) Flange bearing housing assembly with female thread, (2) flange bearing housing mounting with counterbore

Bearing housing for axial load

If high axial forces occur, MISUMI offers a special form of flange bearings in the combination of needle bearings for radial forces and axial ball bearings for axial forces.

Flange bearing housing with axial ball bearings - flange bearings with needle bearings and axial bearing - flange bearing

Application example – (1) bearing housing with needle bearing and BGCT axial ball bearing, (F) load direction

Maintenance

For bearing housings, the installed bearing can be replaced after the service life has been reached. If the bearings are pressed into the bearing housing, it is recommended to replace the bearing together with the housing. The bearing number installed in the MISUMI bearing housing is discernible from the article number of the bearing unit.
Further information about the various application of bearings can be found under the tab More Information.
Note : After determining the bearing number, you can enter it in the search window to determine the load values and specifications of the bearing for the calculation.

Application examples

Application example - flange bearing housing with angular ball bearing - flange bearing with three ball bearings - fixed bearing - bearing with housing

Application example of a flange bearing housing
(1) Collar, (2) Bearing lock nut, (3) Deep groove ball bearing, (4) Housing, (5) Rotary shaft, (6) O-ring, (7) Angular ball bearing, (8) Collar

Application example - pedestal bearing housing with conveyor belt - pedestal bearing for conveyor belt - bearing with housing

Application example of a pedestal bearing with conveyor belt
(1) Pedestal bearing, (2) Rotary shaft, (3) Conveyor belt, (4) Idler for flat belts, (5) Collar

Application example - bearing housing front mount - bearing housing straight - bearing housing with cross hole - bearing with housing

Application example of a bearing housing
(1) Bearing housing, (2) Metal washer, (3) Screw, (4) Mounting plate, (5) Nut

Application example - Flange bearing housing with clamping ring - Flange bearing with adjusting ring - Flange bearing - Flange bearing with two ball bearings

Application example of a flange bearing housing with clamping ring
(1) Flange bearing, (2) Clamping ring

Supplementary Article

Rotary shafts

Drive shafts

Bearing Lock Nuts

Washers / Collars (Metal)

Screws

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
BGBKB6204ZZ-40
BGBKB6204ZZ-40

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Bearing I.D. d (mm)	Bearing Material	Holder Material	Thickness T (mm)	Holder Surface Treatment	Height h (mm)	Bearing Part Number	Seals	Holder Width L (mm)	Height Indication
	29.98 €	1	Available	10 Days	10	-	[Steel] Steel	EN 1.1191 Equiv.	20	Black Oxide	-	6204	ZZ (Double Shield)	60	Height Selection
	-	1		10 Days	10	20	[Steel] Steel	EN 1.1191 Equiv.	20	Black Oxide	40	6204	ZZ (Double Shield)	60	Height Selection

Back to the Category Bearings with Housing

Technical Drawing - Bearings with Housing

Specification Tables - Bearings with Housing

Part Number			h		d	D_H7		dh	B	H	L	L₁	T	M (Coarse)	Unit Price
Type	Bearing No.	Seal	Selectable	Configurable 1mm Increment											h Selectable					h Configurable
Type	Bearing No.	Seal	Selectable	Configurable 1mm Increment			Tolerance								BGBKB	BGBK	BGBKA	BGBKSA	BGBKS	BGBFB	BGBF	BGBFA	BGBFSA	BGBFS
h Selectable BGBKB BGBK BGBKA BGBKSA BGBKS	623	ZZ Double Shielded (x1.0) *VV Non-Contact Sealed Rubber Seal (x1.1) DD Contact Sealed Rubber Seal (x1.1)	15 20 25	15~30	3	10	+ 0.015 0	7	4	h+9	20	10	10	M4				-	-				-	-
	624				4	13	+ 0.018 0	9	5	h+11	22	14	10					-	-				-	-
	605				5	14		10	5	h+11	24	16	10					-	-				-	-
	625		20 25 30	20~30	5	16		12	5	h+12	28	16	10					-	-				-	-
	606				6	17		13	6	h+13	34	22	12	M5
	626				6	19	+ 0.021 0	15	6	h+14	36	24	12
	608				8	22		18	7	h+15	38	26	12
	628		25 30	25~30	8	24		20	8	h+16	34	22	15
	6900		25 30 40	25~40	10	22		19	6	h+15	32	20	12
	6000					26		22	8	h+17	38	26	15
	6200					30		24	9	h+19	40	28	15
	6901				12	24		21	6	h+16	36	24	12
	6001					28		24	8	h+18	40	28	15
	6201					32	+ 0.025 0	26	10	h+20	42	30	16
h Configurable BGBFB BGBF BGBFA BGBFSA BGBFS	6902		30 40 50	30~50	15	28	+ 0.021 0	25	7	h+18	42	30	12
	6002					32	+ 0.025 0	28	9	h+20	50	36	15	M6
	6202					35	+ 0.025 0	29	11	h+22	44	30	17
	6903				17	30	+ 0.021 0	27	7	h+19	42	30	13
	6003					35	+ 0.025 0	31	10	h+22	50	36	16
	6203					40		34	12	h+24	48	36	20
	6904		40 50 60	40~60	20	37		34	9	h+23	45	31	15
	6004					42		36	12	h+25	54	38	19	M8
	6204					47		40	14	h+28	60	44	20
	6005				25	47		41	12	h+28	62	46	19				-	-	-			-	-	-
	6205		50 80	50~80	25	52	+ 0.030 0	45	15	h+31	70	50	22	M10			-	-	-			-	-	-
	6006				30	55		48	13	h+32	74	54	20				-	-	-			-	-	-
	6206				30	62		55	16	h+36	82	62	23				-	-	-			-	-	-

The price of sealed VV and DD are the price shown in the table multiplied by 1.1.
Check for available sizes in the price list. * No. 623, 624, 605 and 606 are not available for VV (Non-contact Sealed).

Alterations - Bearings with Housing

Bottom Mount/Retained:Related Image

Products homepage

Basic information

Shape	Bottom Mount	Bearing Used	Deep Groove Ball Bearings	Number of Bearings	Single
Retaining Ring	Provided	Type	Bearings with Housings

Configure

2Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Bearing I.D. d(mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Height h(mm)
15

20

25

30

40

50

60

80
Clear
Type
- BGBF
- BGBFA
- BGBFB
- BGBFS
- BGBFSA
- BGBK
- BGBKA
- BGBKB
- BGBKS
- BGBKSA
Clear
Bearing Material
- Steel
  - Steel
- Stainless Steel
Clear
Holder Material
- EN 1.1191 Equiv.
- EN 1.4301 Equiv.
- EN AW-2017 Equiv.
  - Aluminum Alloy 2000 series
Clear
Thickness T(mm)
10

12

13

15

16

17

19

20

22

23
Clear
Holder Surface Treatment
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
- Not Provided
Clear
Bearing Part Number
605

606

608

623

624

625

626

628

6000

6001

6002

6003

6004

6005

6006

6200

6201

6202

6203

6204

6205

6206

6900

6901

6902

6903

6904
Clear
Seals
- DD (Contact Rubber Seal)
- VV (Non-Contact Rubber Seal)
- ZZ (Double Shield)
Clear
Holder Width L(mm)
20

22

24

28

32

34

36

38

40

42

44

45

48

50

54

60

62

70

74

82
Clear
Height Indication
- Height Configurable
- Height Selection
Clear
Filter by CAD data type
- 2D
- 3D
Clear