Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!
KYOCERA
60° Triangle Negative with Hole TNGG16○○-25R "Medium to Rough" Low-Resistance
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 6 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Medium to deep grinding | Negative | Right-hand / Left-hand | 0.4 | - |
KYOCERA
60° Triangle Positive with Hole TBMT ○○DP "Finishing"
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel | Finish | Pozidriv | No-hand | 0.2 | - |
KYOCERA
60° Triangle Positive with Hole TBGT "Finishing"
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel / Stainless Steel | Finish | Pozidriv | Left-hand | 0.4 | - |
KYOCERA
60° Triangle Positive with Hole TCGT "Low Feed"
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel / Stainless Steel / Cast Iron | Medium grinding | Pozidriv | Right-hand / Left-hand | 0.2 | - |
KYOCERA
60° Triangle Positive with Hole TPMT "Medium Finishing"
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel / Stainless Steel / Cast Iron | Medium grinding | Pozidriv | No-hand | 0.2 ~ 0.4 | - |
KYOCERA
60° Triangle Positive with Hole TPGH "Finishing"
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Finish | Pozidriv | Right-hand | 0.2 ~ 0.4 | - |
KYOCERA
60° Triangle Positive with Hole TPET "Finishing"
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel / Stainless Steel | Finish | Pozidriv | Right-hand | Other | - |
KYOCERA
60° Triangle Positive with Hole TPGB without Breaker "Cast Iron"
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel / Stainless Steel / Cast Iron | Medium grinding | Pozidriv | No-hand | 0.2 | - |
KYOCERA
60° Triangle Positive without Hole TPMR "Finishing"
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel / Stainless Steel / Cast Iron | Finish | Pozidriv | No-hand | 0.4 | - |
KYOCERA
60° Triangle Positive without Hole TPMR "Medium Finishing"
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Stainless Steel / Heat-resistant alloy, titanium alloy | Medium grinding | Pozidriv | No-hand | 0.8 | - |
KYOCERA
60° Triangle Positive without Hole TPGN without Breaker "Cast Iron"
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Medium grinding | Pozidriv | No-hand | 0.4 | - |
KYOCERA
60° Triangle Negative, CBN Diamond TNGA
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | High Hardness Material | - | Negative | No-hand | 0.2 ~ 0.8 | - |
KYOCERA
60° Triangle Positive, CBN Diamond TPGB
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 1 | High Hardness Material | - | Pozidriv | No-hand | 0.2 ~ 0.4 | - |
KYOCERA
60° Triangle Positive, CBN Diamond TPGW
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | High Hardness Material | - | Pozidriv | No-hand | 0.4 | - |
KYOCERA
Tip for Lathe, CBN Diamond, Positive TBMT
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 1 | Non-ferrous metal / Heat-resistant alloy, titanium alloy | - | Pozidriv | No-hand | 0.2 | - |
KYOCERA
Tip for Lathe, CBN Diamond, Positive TPGB
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 1 | Non-ferrous metal / Heat-resistant alloy, titanium alloy | - | Pozidriv | No-hand | 0.2 ~ 0.4 | - |
KYOCERA
Tip for Lathe, CBN Diamond, Positive TPMH
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 1 | Non-ferrous metal / Heat-resistant alloy, titanium alloy | - | Pozidriv | No-hand | 0.2 | - |
KYOCERA
Outer Diameter Thread Cutting Tip 16ER / L○○ISO
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel | - | Pozidriv | Right-hand | Other | Outer Diameter |
KYOCERA
Outer Diameter Thread Cutting Tip 22ER / L○○ISO
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel | - | Pozidriv | Right-hand | Other | Outer Diameter |
KYOCERA
Inner Diameter Thread Cutting Tip 11IR / L○○ISO-TF
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel | - | Pozidriv | Right-hand | Other | Internal Diameter |
KYOCERA
Inner Diameter Thread Cutting Tip 11IR / L○○ISO
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | - | Pozidriv | Right-hand | Other | Internal Diameter |
KYOCERA
Outer Diameter Thread Cutting Tip 22ER / L○○60
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel | - | Pozidriv | Right-hand | Other | Outer Diameter |
SANDVIK
CoroThread 266 V-Shaped 55° Without Finishing Blade
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | - | - | Right-hand / Left-hand | Other | Outer Diameter / Internal Diameter |
SANDVIK
CoroThread 266 UN 60° With Finishing Blade
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Finish | - | Right-hand / Left-hand | - | Outer Diameter / Internal Diameter |
SANDVIK
CoroThread 266 NPT 60° NPSC, NPTR, LINEPIPE1) With Finishing Blade
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Finish | - | Right-hand / Left-hand | - | Outer Diameter / Internal Diameter |
SANDVIK
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Finish | - | Right-hand / Left-hand | - | Outer Diameter / Internal Diameter |
SANDVIK
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Finish | - | Right-hand | - | Outer Diameter / Internal Diameter |
SANDVIK
Round 30° With Finishing Blade
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Finish | - | Right-hand / Left-hand | - | Outer Diameter / Internal Diameter |
SANDVIK
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Finish | - | Right-hand | - | Outer Diameter |
SANDVIK
ACME Trapezoid 29° Thread Crest, With Chamfering Blade
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | - | - | Right-hand / Left-hand | - | Outer Diameter / Internal Diameter |
SANDVIK
API 60° With Finishing Blade, For Shoulder Connections
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Finish | - | Right-hand | - | Outer Diameter / Internal Diameter |
SANDVIK
API Round 60° With Finishing Blade
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Finish | - | Right-hand | - | Outer Diameter / Internal Diameter |
SANDVIK
API With Finishing Blade, For Tubing & Casing
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | - | - | Right-hand | - | Outer Diameter / Internal Diameter |
SANDVIK
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Grooving / Parting | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | - | - | Right-hand / Left-hand | Other | - |
SANDVIK
For Negative Insert Screw Clamp
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel / Stainless Steel / Cast Iron | Finish / Medium grinding | - | No-hand | Other | - |
SANDVIK
T-Max U Lock Whitworth 55° (BSW, BSF, BSP) With Finishing Blade
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Finish | - | Right-hand / Left-hand | - | Internal Diameter |
SANDVIK
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Finish / Medium grinding | Negative | No-hand | 1.2 | - |
SANDVIK
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel / Stainless Steel | - | - | No-hand | 0.4 | - |
SANDVIK
T-Max U-Lock Threading Insert R / L166.0..MM..
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Threading | 3 | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | - | - | Left-hand | - | Internal Diameter |
SANDVIK
CoroTurn 111 Triangular Shaped 60°
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Finish / Medium grinding | Pozidriv | No-hand | 0.2 ~ 0.8 | - |
SANDVIK
Negative Insert T-Max P Triangular Shaped 60°
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | - | Negative | No-hand | 0.4 ~ 1.6 | - |
SANDVIK
CoroTurn 107 Positive Insert Triangular Shaped 60°
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Non-ferrous metal / High Hardness Material | - | Pozidriv | No-hand | 0.2 ~ 0.8 | - |
SANDVIK
Positive Insert For Turning (Triangular Shaped 60°)
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Outer Diameter/Inner Diameter | 3 | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | - | Pozidriv | Right-hand / Left-hand / No-hand | 0.4 ~ 1.2 | - |
KYOCERA
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | - | - | Cast Iron | Rough cutting | Negative | - | 0.8 | - |
NGK SPARK PLUG
Insert For Back-Turning (Without Breaker), TBP-FR / LV
Shape | Application | Available corners | work material | Breaker Use | Rake angle | Cutting Direction | Nose R | O.D./ I.D. (For Threading) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | Other | - | Stainless Steel / Heat-resistant alloy, titanium alloy | - | - | Right-hand | Other | - |