Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Available corners
  • Turning Inserts

      • T-MaxP Insert X-Line WNMG

          SANDVIK

          T-MaxP Insert X-Line WNMG

          [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Hex 80° insert· Negative insert
          Ler mais
          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
          W (Hexagonal Type)Outer Diameter/Inner Diameter6Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingNegativeNo-hand0.4 ~ 1.2-
          Preço (excluindo IVA) a partir de:
          22.35 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • CoroTurn 107 Diamond Shaped 35°

            SANDVIK

            CoroTurn 107 Diamond Shaped 35°

            [Features]Carbide-coated insert for outer-diameter machining of small componentsLeft/right handed insertDiamond-shaped 35° insertPositive insertFor general engineering and machining heat-resistant alloysFor finishing
            Ler mais
            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
            V (35° Diamond-Shaped)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinish / Medium grindingPozidrivRight-hand / Left-hand / No-hand0.2 ~ Other-
            Preço (excluindo IVA) a partir de:
            19.30 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • T-MaxP Insert X-Line CNMG

              SANDVIK

              T-MaxP Insert X-Line CNMG

              [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Diamond-shaped 80° insert· Negative insert
              Ler mais
              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
              C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness MaterialFinish / Medium grindingNegativeNo-hand0.4 ~ 1.6-
              Preço (excluindo IVA) a partir de:
              14.83 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • T-MaxP Insert X-Line DNMG

                SANDVIK

                T-MaxP Insert X-Line DNMG

                [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Diamond-shaped 55° insert· Negative insert
                Ler mais
                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                D (55° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingNegativeNo-hand0.4 ~ 0.8-
                Preço (excluindo IVA) a partir de:
                27.58 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • SANDVIK CoroThread 266 Insert for Thread Turning

                  SANDVIK

                  SANDVIK CoroThread 266 Insert for Thread Turning

                  [Specifications]・Work material: Steel, Stainless Steel, Cast Iron, Non-ferrous metal, Heat-resistant alloy, titanium alloy, High Hardness Material・Cutting Direction: Right-hand, Left-hand・Grade type: CBN, Hard metal・eClass-5.1: 21011901, 21011902[Features]・Optimize your tool path・iLock interface・Precision coolant solution
                  Ler mais
                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                  ---Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material--Right-hand / Left-hand--
                  Preço (excluindo IVA) a partir de:
                  44.08 €
                  Data de envio regular:
                  5 dias úteis
                  Configurar
                • Diamond Shape 35° / Positive with Hole VPGT

                    KYOCERA

                    Diamond Shape 35° / Positive with Hole VPGT

                    [Specifications]· Shape: V (35° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                    Ler mais
                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                    V (35° Diamond-Shaped)Outer Diameter/Inner Diameter2Stainless SteelFinishPozidrivNo-handOther-
                    Preço (excluindo IVA) a partir de:
                    16.51 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                    • OSG

                      EcoCut Insert XCNT / XCET

                      [Features]· 4 tools in one. Flattening the bases of holes. High-efficiency machining of internal diameters.
                      Ler mais
                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                      Other--Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand / No-hand--
                      Preço (excluindo IVA) a partir de:
                      11.77 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • Ceramic Tip (for Turning)

                        SANDVIK

                        Ceramic Tip (for Turning)

                        Unique shape exhibits high performance
                        Ler mais
                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                        T (Triangle)Outer Diameter/Inner Diameter3Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material-NegativeNo-hand0.8 ~ 1.2-
                        Preço (excluindo IVA) a partir de:
                        22.67 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • Planet Cutter Series Chip for High Pro Planet Cutter Series PC-CTI

                          OSG

                          Planet Cutter Series Chip for High Pro Planet Cutter Series PC-CTI

                          OSG Bit (for Milling) Planet Cutter Series Insert for High Pro Planet Cutter Series PC-CTI
                          Ler mais
                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                          OtherThreading-Steel / Non-ferrous metal-----
                          Preço (excluindo IVA) a partir de:
                          23.04 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade

                            SANDVIK

                            CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade

                            [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor 55° Whitworth threadsMachining pitch: for 5 threads
                            Ler mais
                            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                            T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinish-Right-hand / Left-hand-Outer Diameter / Internal Diameter
                            Preço (excluindo IVA) a partir de:
                            43.78 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • CoroCut 1 / 2 For Parting

                              SANDVIK

                              CoroCut 1 / 2 For Parting

                              [Features]CoroCut 2 insertsSolid carbide-coated tipFor parting and groovingThe rail lock provides high clamp rigidity2-cutting-edge specificationFor partingFor high-feed machiningSeat size: GWidth: 3.0 mm
                              Ler mais
                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                              OtherGrooving / Parting2Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand / No-hand0.2 ~ Other-
                              Preço (excluindo IVA) a partir de:
                              40.69 €
                              Data de envio regular:
                              6 dias úteis
                              Configurar
                            • CoroTurn 107 Triangular Shaped 60°

                                SANDVIK

                                CoroTurn 107 Triangular Shaped 60°

                                [Features]Carbide-coated insert for outer-diameter machining of small componentsPrecision classTriangular-shaped insertLeft/right handed insertPositive insertFor general engineering and machining heat-resistant alloysFor finishing
                                Ler mais
                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinish / Medium grindingPozidrivRight-hand / Left-hand / No-hand0.2 ~ Other-
                                Preço (excluindo IVA) a partir de:
                                11.41 €
                                Data de envio regular:
                                6 dias úteis
                                Configurar
                              • Outer Diameter Grooving Tip GBA32 / GBA43

                                  KYOCERA

                                  Outer Diameter Grooving Tip GBA32 / GBA43

                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                  OtherGrooving / Parting-Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material--Right-hand / Left-hand0.2 ~ Other-
                                  Preço (excluindo IVA) a partir de:
                                  20.07 €
                                  Data de envio regular:
                                  6 dias úteis
                                  Configurar
                                • T-Max P Negative Insert For Turning (Triangular Shaped 60°)

                                    SANDVIK

                                    T-Max P Negative Insert For Turning (Triangular Shaped 60°)

                                    [Features]Carbide-coated insertTriangular-shaped insertNegative insertFor machining general steel and low-carbon steelFor finishing
                                    Ler mais
                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                    T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingNegativeRight-hand / No-hand0.2 ~ Other-
                                    Preço (excluindo IVA) a partir de:
                                    10.75 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • T-Max P Negative Insert For Turning (Hexagonal Shaped 80°)

                                      SANDVIK

                                      T-Max P Negative Insert For Turning (Hexagonal Shaped 80°)

                                      [Features]Carbide-coated insertHexagonal-shaped 80° insertNegative insertFor machining general steel and stainless steelFor semi-finishing
                                      Ler mais
                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                      W (Hexagonal Type)Outer Diameter/Inner Diameter4 / 6Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingNegativeNo-hand0.4 ~ 1.6-
                                      Preço (excluindo IVA) a partir de:
                                      16.40 €
                                      Data de envio regular:
                                      6 dias úteis
                                      Configurar
                                    • Kyocera Turning Insert PV720 PVD Cermet

                                        KYOCERA

                                        Kyocera Turning Insert PV720 PVD Cermet

                                        [Features]· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.· Realizes both high-efficiency machining and a high-grade finished surface.[Applications]· For lathe turning· PV720: The foremost recommended PVD cermet for steel machining
                                        Ler mais
                                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                        ----Finish----
                                        Preço (excluindo IVA) a partir de:
                                        7.61 €
                                        Data de envio regular:
                                        8 dias úteis
                                        Configurar
                                      • Positive Tip for T-Max S Turning Tool

                                          SANDVIK

                                          Positive Tip for T-Max S Turning Tool

                                          Unique shape exhibits high performance
                                          Ler mais
                                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                          T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material--No-hand0.2 ~ 1.2-
                                          Preço (excluindo IVA) a partir de:
                                          9.65 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar
                                        • CORO-TURN
                                          • Volume Discount

                                          SANDVIK

                                          CORO-TURN

                                          Unique shape exhibits high performance
                                          Ler mais
                                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                          D (55° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingPozidrivNo-hand0.2 ~ Other-
                                          Preço (excluindo IVA) a partir de:
                                          14.94 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar
                                        • Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Intermediate Cutting"

                                            KYOCERA

                                            Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Intermediate Cutting"

                                            [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
                                            Ler mais
                                            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                            C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast IronMedium grindingPozidrivNo-hand0.2 ~ Other-
                                            Preço (excluindo IVA) a partir de:
                                            14.21 €
                                            Data de envio regular:
                                            6 dias úteis
                                            Configurar
                                          • T-Max Q-Cut For Grooving

                                              SANDVIK

                                              T-Max Q-Cut For Grooving

                                              [Features]T-Max Q-Cut insertSolid carbide-coated insertFor parting and groovingSingle-edge specificationFor groovingFor low-feed machiningWidth: 5.0 mm
                                              Ler mais
                                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                              OtherGrooving / Parting1Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--No-hand0.2 ~ Other-
                                              Preço (excluindo IVA) a partir de:
                                              23.75 €
                                              Data de envio regular:
                                              6 dias úteis
                                              Configurar
                                            • T-Max Q-Cut (151.3 Type) For Inner Diameter Grooving

                                                SANDVIK

                                                T-Max Q-Cut (151.3 Type) For Inner Diameter Grooving

                                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                OtherGrooving / Parting1Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--No-hand0.2 ~ Other-
                                                Preço (excluindo IVA) a partir de:
                                                22.98 €
                                                Data de envio regular:
                                                6 dias úteis
                                                Configurar
                                              • CoroThread 266 Metric 60° With Finishing Blade

                                                  SANDVIK

                                                  CoroThread 266 Metric 60° With Finishing Blade

                                                  [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor metric threadsMachining pitch: for 5.0 mm
                                                  Ler mais
                                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                  T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinish-Right-hand / Left-hand-Outer Diameter / Internal Diameter
                                                  Preço (excluindo IVA) a partir de:
                                                  43.93 €
                                                  Data de envio regular:
                                                  6 dias úteis
                                                  Configurar
                                                • ISO Trapezoid 30° Thread Crest, With Chamfering Blade

                                                    SANDVIK

                                                    ISO Trapezoid 30° Thread Crest, With Chamfering Blade

                                                    [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor trapezoidal 30° threadsMachining pitch: for 8 mm
                                                    Ler mais
                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                    T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand-Outer Diameter / Internal Diameter
                                                    Preço (excluindo IVA) a partir de:
                                                    56.75 €
                                                    Data de envio regular:
                                                    6 dias úteis
                                                    Configurar
                                                  • STUB-ACME 29° Thread Crest, With Chamfering Blade

                                                      SANDVIK

                                                      STUB-ACME 29° Thread Crest, With Chamfering Blade

                                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                      T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand-Outer Diameter / Internal Diameter
                                                      Preço (excluindo IVA) a partir de:
                                                      56.75 €
                                                      Data de envio regular:
                                                      6 dias úteis
                                                      Configurar
                                                    • T-Max P Negative Insert For Turning (Square Shaped 90°)

                                                        SANDVIK

                                                        T-Max P Negative Insert For Turning (Square Shaped 90°)

                                                        [Features]Carbide-coated insertSquare-shaped insertNegative insertFor machining general steelFor semi-finishing
                                                        Ler mais
                                                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                        S (Rectangular)Outer Diameter/Inner Diameter4Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingNegativeNo-hand0.4 ~ Other-
                                                        Preço (excluindo IVA) a partir de:
                                                        10.77 €
                                                        Data de envio regular:
                                                        6 dias úteis
                                                        Configurar
                                                      • T-Max Insert For Turning

                                                          SANDVIK

                                                          T-Max Insert For Turning

                                                          [Features]T-Max S, carbide-coated insert for general machiningPrecision classSquare-shaped insertPositive insertFor general steel machiningWithout breaker
                                                          Ler mais
                                                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                          S (Rectangular) / T (Triangle)Outer Diameter/Inner Diameter3 / 4Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material--No-hand0.4 ~ Other-
                                                          Preço (excluindo IVA) a partir de:
                                                          8.53 €
                                                          Data de envio regular:
                                                          6 dias úteis
                                                          Configurar
                                                        • CoroCut 3 For Grooving / Profiling

                                                            SANDVIK

                                                            CoroCut 3 For Grooving / Profiling

                                                            [Features]CoroCut 3 insert3-cutting-edge specificationCarbide-coated insertFor shallow groovingFor profilingFull RGroove width: 1.5 mm
                                                            Ler mais
                                                            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                            T (Triangle)Grooving / Parting3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--No-hand0.4 ~ Other-
                                                            Preço (excluindo IVA) a partir de:
                                                            70.77 €
                                                            Data de envio regular:
                                                            6 dias úteis
                                                            Configurar
                                                          • CoroCut XS Insert For Front Turning / Back Turning

                                                              SANDVIK

                                                              CoroCut XS Insert For Front Turning / Back Turning

                                                              [Features]CoroCut XS insertFor outer-diameter machining of small componentsCarbide-coated insertFor back turningNose R: 0.20 mm
                                                              Ler mais
                                                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                              OtherOuter Diameter/Inner Diameter2Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand0.2 ~ OtherOuter Diameter
                                                              Preço (excluindo IVA) a partir de:
                                                              54.08 €
                                                              Data de envio regular:
                                                              6 dias úteis
                                                              Configurar
                                                            • CoroTurn 107 Round Insert For Turning

                                                                SANDVIK

                                                                CoroTurn 107 Round Insert For Turning

                                                                [Features]Carbide-coated insert for outer-diameter machining of small componentsRound insertPositive insertFor machining heat-resistant alloysFor semi-finishing
                                                                Ler mais
                                                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                R (Circular)Outer Diameter/Inner Diameter1Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloyMedium grindingPozidrivNo-handOther-
                                                                Preço (excluindo IVA) a partir de:
                                                                12.67 €
                                                                Data de envio regular:
                                                                6 dias úteis
                                                                Configurar
                                                              • Carmex Thread Cutting Tip (TRAPEZ / for Trapezoidal Screw)

                                                                  NOGAJAPAN

                                                                  Carmex Thread Cutting Tip (TRAPEZ / for Trapezoidal Screw)

                                                                  [Features]· BMA: Ultra-fine particle carbide with TiAlN coating. Versatile grade that can be used for difficult-to-cut materials at medium to high speed ranges.[Applications]· Pitch For Threading
                                                                  Ler mais
                                                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                  ---------
                                                                  Preço (excluindo IVA) a partir de:
                                                                  28.46 €
                                                                  Data de envio regular:
                                                                  6 dias úteis
                                                                  Configurar
                                                                • Kyocera Turning Insert CA530 CVD Coating

                                                                    KYOCERA

                                                                    Kyocera Turning Insert CA530 CVD Coating

                                                                    [Features]· CA530: Special tough substrate with high stability and tough coating with excellent abrasion resistance.· Supports general to heavy intermittent machining of steel (with a focus on stability).[Applications]· For lathe turning· CA530: Supports general purpose to heavy intermittent machining of steel (focus on stability)
                                                                    Ler mais
                                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                    ----Finish----
                                                                    Preço (excluindo IVA) a partir de:
                                                                    8.14 €
                                                                    Data de envio regular:
                                                                    8 dias úteis
                                                                    Configurar
                                                                  • Kyocera Cutting Insert PR1535 PVD Coating

                                                                      KYOCERA

                                                                      Kyocera Cutting Insert PR1535 PVD Coating

                                                                      [Features]· PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.[Applications]· For Cutting Off· PR1535: Stainless steel cutoff machining (foremost recommended material)
                                                                      Ler mais
                                                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                      ---------
                                                                      Preço (excluindo IVA) a partir de:
                                                                      21.58 €
                                                                      Data de envio regular:
                                                                      6 dias úteis
                                                                      Configurar
                                                                    • Kyocera Turning Insert PV720 PVD Cermet

                                                                        KYOCERA

                                                                        Kyocera Turning Insert PV720 PVD Cermet

                                                                        [Features]· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.· Realizes both high-efficiency machining and a high-grade finished surface.[Applications]· For lathe turning· PV720: The foremost recommended PVD cermet for steel machining
                                                                        Ler mais
                                                                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                        ----Finish / Medium grinding / Light Cutting----
                                                                        Preço (excluindo IVA) a partir de:
                                                                        9.09 €
                                                                        Data de envio regular:
                                                                        8 dias úteis
                                                                        Configurar
                                                                      • Kyocera Turning Insert PV720 PVD Cermet

                                                                          KYOCERA

                                                                          Kyocera Turning Insert PV720 PVD Cermet

                                                                          [Features]· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.· Realizes both high-efficiency machining and a high-grade finished surface.[Applications]· For lathe turning· PV720: The foremost recommended PVD cermet for steel machining
                                                                          Ler mais
                                                                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                          ----Finish----
                                                                          Preço (excluindo IVA) a partir de:
                                                                          12.03 €
                                                                          Data de envio regular:
                                                                          8 dias úteis
                                                                          Configurar
                                                                        • Sandvik CoroThread 266 Thread-Cutting Tip

                                                                            SANDVIK

                                                                            Sandvik CoroThread 266 Thread-Cutting Tip

                                                                            [Features]· CoroThread 266, Thread Cutting Tip· Coated carbide tip.· New concept tip achieves simple installation and has a high clamp rigidity guide rail[Applications]· For internal threading machining
                                                                            Ler mais
                                                                            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                            ------Right-hand--
                                                                            Preço (excluindo IVA) a partir de:
                                                                            52.44 €
                                                                            Data de envio regular:
                                                                            6 dias úteis
                                                                            Configurar
                                                                          • Carbide Insert CCMT

                                                                              WIDIA

                                                                              Carbide Insert CCMT【10 unidades】

                                                                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                              C (80° Diamond-Shape)--Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material-Pozidriv---
                                                                              Preço (excluindo IVA) a partir de:
                                                                              15.86 €
                                                                              Data de envio regular:
                                                                              6 dias úteis
                                                                              Configurar
                                                                            • SANDVIK CoroThread 266 Insert for Grooving

                                                                                SANDVIK

                                                                                SANDVIK CoroThread 266 Insert for Grooving

                                                                                [Specifications]・Work material: Steel, Stainless Steel, Cast Iron, Non-ferrous metal, Heat-resistant alloy, titanium alloy・Insert shape: CoroThread 254・Cutting Direction: Right-hand, Left-hand・Grade type: Hard metal・Suitable for which type of machining?: Groove turning・Insert type: Insert with bore and geometry・eClass-5.1: 21011902[Features]・Optimize your tool path・iLock interface・Precision coolant solution・For grooving
                                                                                Ler mais
                                                                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                ---Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand--
                                                                                Preço (excluindo IVA) a partir de:
                                                                                39.77 €
                                                                                Data de envio regular:
                                                                                5 dias úteis
                                                                                Configurar
                                                                              • Outer Diameter Threading Tool Holder KTT Type, Compatible Chip

                                                                                  KYOCERA

                                                                                  Outer Diameter Threading Tool Holder KTT Type, Compatible Chip

                                                                                  Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.
                                                                                  Ler mais
                                                                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                  T (Triangle)Threading-Steel / Stainless Steel--Right-hand / Left-hand0.2 ~ Other-
                                                                                  Preço (excluindo IVA) a partir de:
                                                                                  30.77 €
                                                                                  Data de envio regular:
                                                                                  6 dias úteis
                                                                                  Configurar
                                                                                • CERATIZIT HYPERCOAT Tip

                                                                                    OSG

                                                                                    CERATIZIT HYPERCOAT Tip

                                                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                    C (80° Diamond-Shape)Other-Steel / Stainless Steel / Cast Iron-NegativeNo-hand0.8-
                                                                                    Preço (excluindo IVA) a partir de:
                                                                                    8.42 €
                                                                                    Data de envio regular:
                                                                                    6 dias úteis
                                                                                    Configurar
                                                                                  • 80° Hexagon Type Negative with Hole WNMG○○CQ "Finishing to Medium Lifting"
                                                                                    • Volume Discount

                                                                                    KYOCERA

                                                                                    80° Hexagon Type Negative with Hole WNMG○○CQ "Finishing to Medium Lifting"

                                                                                    [Specifications]· Shape: W (Hexagon)· Number of Available Corners: 6· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
                                                                                    Ler mais
                                                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                    W (Hexagonal Type)Outer Diameter/Inner Diameter6SteelMedium grindingNegativeNo-hand0.8-
                                                                                    Preço (excluindo IVA) a partir de:
                                                                                    8.67 €
                                                                                    Data de envio regular:
                                                                                    6 dias úteis
                                                                                    Configurar
                                                                                  • Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"
                                                                                    • Volume Discount

                                                                                    KYOCERA

                                                                                    Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"

                                                                                    [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
                                                                                    Ler mais
                                                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                    C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Heat-resistant alloy, titanium alloyMedium grindingPozidrivNo-hand0.4 ~ 0.8-
                                                                                    Preço (excluindo IVA) a partir de:
                                                                                    7.73 €
                                                                                    Data de envio regular:
                                                                                    6 dias úteis
                                                                                    Configurar
                                                                                  • Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed"

                                                                                      KYOCERA

                                                                                      Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed"

                                                                                      [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
                                                                                      Ler mais
                                                                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                      C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyMedium grindingPozidrivRight-hand / Left-hand0.2 ~ Other-
                                                                                      Preço (excluindo IVA) a partir de:
                                                                                      14.21 €
                                                                                      Data de envio regular:
                                                                                      6 dias úteis
                                                                                      Configurar
                                                                                    • 60° Triangle Positive with Hole TPMT○○GP "Finishing"
                                                                                      • Volume Discount

                                                                                      KYOCERA

                                                                                      60° Triangle Positive with Hole TPMT○○GP "Finishing"

                                                                                      [Specifications]· Shape: T (Triangle)· Number of Usable Corners: 3· Rake Angle: Positive· Handedness: No Handedness[Applications]· Machining Applications: For O.D., I.D.· Breaker Applications: Finishing
                                                                                      Ler mais
                                                                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                      T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast IronFinishPozidrivNo-hand0.4-
                                                                                      Preço (excluindo IVA) a partir de:
                                                                                      5.42 €
                                                                                      Data de envio regular:
                                                                                      6 dias úteis
                                                                                      Configurar
                                                                                    • 60° Triangle Positive without Hole TPMR "Medium Cutting"
                                                                                      • Volume Discount

                                                                                      KYOCERA

                                                                                      60° Triangle Positive without Hole TPMR "Medium Cutting"

                                                                                      [Specifications]· Shape: T (Triangle)· Number of Available Corners: 3· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
                                                                                      Ler mais
                                                                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                      T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast IronMedium grindingPozidrivNo-hand0.4 ~ 0.8-
                                                                                      Preço (excluindo IVA) a partir de:
                                                                                      5.43 €
                                                                                      Data de envio regular:
                                                                                      6 dias úteis
                                                                                      Configurar
                                                                                    • Diamond Shape 35° / Positive with Hole VBMT
                                                                                      • Volume Discount

                                                                                      KYOCERA

                                                                                      Diamond Shape 35° / Positive with Hole VBMT

                                                                                      [Specifications]· Shape: V (35° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                                                                                      Ler mais
                                                                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                      V (35° Diamond-Shaped)Outer Diameter/Inner Diameter2SteelFinish / Medium grindingPozidrivNo-hand0.2 ~ 0.8-
                                                                                      Preço (excluindo IVA) a partir de:
                                                                                      13.20 €
                                                                                      Data de envio regular:
                                                                                      6 dias úteis
                                                                                      Configurar