Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Shape
  • Application
  • Available corners
  • work material
  • Breaker Use
  • Rake angle

Turning Inserts (Breaker Use: Finish)

    • T-MaxP Insert X-Line WNMG

        SANDVIK

        T-MaxP Insert X-Line WNMG

        [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Hex 80° insert· Negative insert
        Ler mais
        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
        W (Hexagonal Type)Outer Diameter/Inner Diameter6Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinishNegativeNo-hand0.4 ~ 0.8-
        Preço (excluindo IVA) a partir de:
        22.35 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • CoroTurn 107 Diamond Shaped 35°

          SANDVIK

          CoroTurn 107 Diamond Shaped 35°

          [Features]Carbide-coated insert for outer-diameter machining of small componentsLeft/right handed insertDiamond-shaped 35° insertPositive insertFor general engineering and machining heat-resistant alloysFor finishing
          Ler mais
          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
          V (35° Diamond-Shaped)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinishPozidrivRight-hand / Left-hand / No-hand0.2 ~ Other-
          Preço (excluindo IVA) a partir de:
          19.30 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • T-MaxP Insert X-Line CNMG

            SANDVIK

            T-MaxP Insert X-Line CNMG

            [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Diamond-shaped 80° insert· Negative insert
            Ler mais
            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
            C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness MaterialFinishNegativeNo-hand0.4 ~ 0.8-
            Preço (excluindo IVA) a partir de:
            20.56 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • T-MaxP Insert X-Line DNMG

              SANDVIK

              T-MaxP Insert X-Line DNMG

              [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Diamond-shaped 55° insert· Negative insert
              Ler mais
              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
              D (55° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinishNegativeNo-hand0.4 ~ 0.8-
              Preço (excluindo IVA) a partir de:
              28.60 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • Diamond Shape 35° / Positive with Hole VPGT

                KYOCERA

                Diamond Shape 35° / Positive with Hole VPGT

                [Specifications]· Shape: V (35° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                Ler mais
                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                V (35° Diamond-Shaped)Outer Diameter/Inner Diameter2Stainless SteelFinishPozidrivNo-handOther-
                Preço (excluindo IVA) a partir de:
                16.51 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade

                  SANDVIK

                  CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade

                  [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor 55° Whitworth threadsMachining pitch: for 5 threads
                  Ler mais
                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                  T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinish-Right-hand / Left-hand-Outer Diameter / Internal Diameter
                  Preço (excluindo IVA) a partir de:
                  43.78 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
                • CoroTurn 107 Triangular Shaped 60°

                    SANDVIK

                    CoroTurn 107 Triangular Shaped 60°

                    [Features]Carbide-coated insert for outer-diameter machining of small componentsPrecision classTriangular-shaped insertLeft/right handed insertPositive insertFor general engineering and machining heat-resistant alloysFor finishing
                    Ler mais
                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                    T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinishPozidrivRight-hand / Left-hand / No-hand0.2 ~ Other-
                    Preço (excluindo IVA) a partir de:
                    13.06 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • T-Max P Negative Insert For Turning (Triangular Shaped 60°)

                      SANDVIK

                      T-Max P Negative Insert For Turning (Triangular Shaped 60°)

                      [Features]Carbide-coated insertTriangular-shaped insertNegative insertFor machining general steel and low-carbon steelFor finishing
                      Ler mais
                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                      T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinishNegativeRight-hand / No-hand0.2 ~ 1.2-
                      Preço (excluindo IVA) a partir de:
                      10.75 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • T-Max P Negative Insert For Turning (Hexagonal Shaped 80°)

                        SANDVIK

                        T-Max P Negative Insert For Turning (Hexagonal Shaped 80°)

                        [Features]Carbide-coated insertHexagonal-shaped 80° insertNegative insertFor machining general steel and stainless steelFor semi-finishing
                        Ler mais
                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                        W (Hexagonal Type)Outer Diameter/Inner Diameter6Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinishNegativeNo-hand0.4 ~ 1.2-
                        Preço (excluindo IVA) a partir de:
                        16.40 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • Kyocera Turning Insert PV720 PVD Cermet

                          KYOCERA

                          Kyocera Turning Insert PV720 PVD Cermet

                          [Features]· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.· Realizes both high-efficiency machining and a high-grade finished surface.[Applications]· For lathe turning· PV720: The foremost recommended PVD cermet for steel machining
                          Ler mais
                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                          ----Finish----
                          Preço (excluindo IVA) a partir de:
                          7.61 €
                          Data de envio regular:
                          8 dias úteis
                          Configurar
                        • CORO-TURN
                          • Volume Discount

                          SANDVIK

                          CORO-TURN

                          Unique shape exhibits high performance
                          Ler mais
                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                          D (55° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinishPozidrivNo-hand0.2 ~ 0.8-
                          Preço (excluindo IVA) a partir de:
                          16.37 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • CoroThread 266 Metric 60° With Finishing Blade

                            SANDVIK

                            CoroThread 266 Metric 60° With Finishing Blade

                            [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor metric threadsMachining pitch: for 5.0 mm
                            Ler mais
                            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                            T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinish-Right-hand / Left-hand-Outer Diameter / Internal Diameter
                            Preço (excluindo IVA) a partir de:
                            43.93 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • T-Max P Negative Insert For Turning (Square Shaped 90°)

                              SANDVIK

                              T-Max P Negative Insert For Turning (Square Shaped 90°)

                              [Features]Carbide-coated insertSquare-shaped insertNegative insertFor machining general steelFor semi-finishing
                              Ler mais
                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                              S (Rectangular)Outer Diameter/Inner Diameter4Steel / Stainless Steel / Heat-resistant alloy, titanium alloyFinishNegativeNo-hand0.4 ~ 1.2-
                              Preço (excluindo IVA) a partir de:
                              13.55 €
                              Data de envio regular:
                              6 dias úteis
                              Configurar
                            • Kyocera Turning Insert CA530 CVD Coating

                                KYOCERA

                                Kyocera Turning Insert CA530 CVD Coating

                                [Features]· CA530: Special tough substrate with high stability and tough coating with excellent abrasion resistance.· Supports general to heavy intermittent machining of steel (with a focus on stability).[Applications]· For lathe turning· CA530: Supports general purpose to heavy intermittent machining of steel (focus on stability)
                                Ler mais
                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                ----Finish----
                                Preço (excluindo IVA) a partir de:
                                8.14 €
                                Data de envio regular:
                                8 dias úteis
                                Configurar
                              • Kyocera Turning Insert PV720 PVD Cermet

                                  KYOCERA

                                  Kyocera Turning Insert PV720 PVD Cermet

                                  [Features]· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.· Realizes both high-efficiency machining and a high-grade finished surface.[Applications]· For lathe turning· PV720: The foremost recommended PVD cermet for steel machining
                                  Ler mais
                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                  ----Finish----
                                  Preço (excluindo IVA) a partir de:
                                  9.09 €
                                  Data de envio regular:
                                  8 dias úteis
                                  Configurar
                                • Kyocera Turning Insert PV720 PVD Cermet

                                    KYOCERA

                                    Kyocera Turning Insert PV720 PVD Cermet

                                    [Features]· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.· Realizes both high-efficiency machining and a high-grade finished surface.[Applications]· For lathe turning· PV720: The foremost recommended PVD cermet for steel machining
                                    Ler mais
                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                    ----Finish----
                                    Preço (excluindo IVA) a partir de:
                                    12.03 €
                                    Data de envio regular:
                                    8 dias úteis
                                    Configurar
                                  • 60° Triangle Positive with Hole TPMT○○GP "Finishing"
                                    • Volume Discount

                                    KYOCERA

                                    60° Triangle Positive with Hole TPMT○○GP "Finishing"

                                    [Specifications]· Shape: T (Triangle)· Number of Usable Corners: 3· Rake Angle: Positive· Handedness: No Handedness[Applications]· Machining Applications: For O.D., I.D.· Breaker Applications: Finishing
                                    Ler mais
                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                    T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast IronFinishPozidrivNo-hand0.4-
                                    Preço (excluindo IVA) a partir de:
                                    5.42 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • Diamond Shape 35° / Positive with Hole VBMT
                                    • Volume Discount

                                    KYOCERA

                                    Diamond Shape 35° / Positive with Hole VBMT

                                    [Specifications]· Shape: V (35° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                                    Ler mais
                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                    V (35° Diamond-Shaped)Outer Diameter/Inner Diameter2SteelFinishPozidrivNo-hand0.2 ~ 0.8-
                                    Preço (excluindo IVA) a partir de:
                                    13.20 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • Diamond Shape 35° / Positive with Hole VCMT

                                      KYOCERA

                                      Diamond Shape 35° / Positive with Hole VCMT

                                      [Specifications]· Shape: V (35° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                                      Ler mais
                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                      V (35° Diamond-Shaped)Outer Diameter/Inner Diameter2Steel / Stainless SteelFinishPozidrivNo-hand0.2-
                                      Preço (excluindo IVA) a partir de:
                                      13.20 €
                                      Data de envio regular:
                                      6 dias úteis
                                      Configurar
                                    • MJ 60° With Finishing Blade

                                        SANDVIK

                                        MJ 60° With Finishing Blade

                                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                        T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinish-Right-hand / Left-hand-Outer Diameter
                                        Preço (excluindo IVA) a partir de:
                                        45.41 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • T-Max U Lock UN 60° With Finishing Blade

                                          SANDVIK

                                          T-Max U Lock UN 60° With Finishing Blade

                                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                          T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness MaterialFinish-Right-hand / Left-hand-Internal Diameter
                                          Preço (excluindo IVA) a partir de:
                                          41.21 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar
                                        • CoroTurn 111 Hexagonal Shaped 80°

                                            SANDVIK

                                            CoroTurn 111 Hexagonal Shaped 80°

                                            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                            W (Hexagonal Type)Outer Diameter/Inner Diameter6Steel / Stainless SteelFinishPozidrivNo-hand0.2 ~ 0.4-
                                            Preço (excluindo IVA) a partir de:
                                            16.53 €
                                            Data de envio regular:
                                            6 dias úteis
                                            Configurar
                                          • CoroTurn 107 Positive Insert For Turning (Triangular Shaped 60°)

                                              SANDVIK

                                              CoroTurn 107 Positive Insert For Turning (Triangular Shaped 60°)

                                              [Features]Carbide-coated insert for outer-diameter machining of small components and general inner-diameter machiningTriangular-shaped insertWiper insertPositive insertFor machining heat-resistant alloysFor finishing
                                              Ler mais
                                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                              T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness MaterialFinishPozidrivNo-hand0.2 ~ 0.8-
                                              Preço (excluindo IVA) a partir de:
                                              10.91 €
                                              Data de envio regular:
                                              6 dias úteis
                                              Configurar
                                            • CoroTurn 107 Positive Insert For Turning (Square Shaped 90°)

                                                SANDVIK

                                                CoroTurn 107 Positive Insert For Turning (Square Shaped 90°)

                                                [Features]A carbide-coated insert for machining the general inner diameters and outer diameters of small componentsSquare-shaped insertPositive insertFor machining stainless steelFor finishing
                                                Ler mais
                                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                S (Rectangular)Outer Diameter/Inner Diameter4Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinishPozidrivNo-hand0.4 ~ 0.8-
                                                Preço (excluindo IVA) a partir de:
                                                17.15 €
                                                Data de envio regular:
                                                6 dias úteis
                                                Configurar
                                              • Kyocera Turning Insert PV720 PVD Cermet

                                                  KYOCERA

                                                  Kyocera Turning Insert PV720 PVD Cermet

                                                  [Features]· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.· Realizes both high-efficiency machining and a high-grade finished surface.[Applications]· For lathe turning· PV720: The foremost recommended PVD cermet for steel machining
                                                  Ler mais
                                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                  ----Finish----
                                                  Preço (excluindo IVA) a partir de:
                                                  6.71 €
                                                  Data de envio regular:
                                                  8 dias úteis
                                                  Configurar
                                                • Kyocera Turning Insert CA525 CVD Coating

                                                    KYOCERA

                                                    Kyocera Turning Insert CA525 CVD Coating

                                                    [Features]· CA525: Special substrate with excellent high-temperature distortion resistance properties and toughened film with a reinforced interface achieve stable machining and long life.· Our first recommended grade for intermittent through general machining of steel.[Applications]· For lathe turning· CA525: The foremost recommended general purpose grade supporting rough to intermittent machining of steel
                                                    Ler mais
                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                    ----Finish----
                                                    Preço (excluindo IVA) a partir de:
                                                    9.69 €
                                                    Data de envio regular:
                                                    9 dias úteis
                                                    Configurar
                                                  • Kyocera Turning Insert TN620 Cermet

                                                      KYOCERA

                                                      Kyocera Turning Insert TN620 Cermet

                                                      [Features]· TN620: Special reinforcing technology (hybrid technology) achieves both superior fracture resistance and wear resistance.· Achieves stable machining of steel and an excellent finished surface.[Applications]· For lathe turning· TN620: The foremost recommended cermet for steel machining
                                                      Ler mais
                                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                      ----Finish----
                                                      Preço (excluindo IVA) a partir de:
                                                      6.71 €
                                                      Data de envio regular:
                                                      9 dias úteis
                                                      Configurar
                                                    • Kyocera Turning Insert TN620 Cermet

                                                        KYOCERA

                                                        Kyocera Turning Insert TN620 Cermet

                                                        [Features]· TN620: Special reinforcing technology (hybrid technology) achieves both superior fracture resistance and wear resistance.· Achieves stable machining of steel and an excellent finished surface.[Applications]· For lathe turning· TN620: The foremost recommended cermet for steel machining
                                                        Ler mais
                                                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                        ----Finish----
                                                        Preço (excluindo IVA) a partir de:
                                                        8.14 €
                                                        Data de envio regular:
                                                        6 dias úteis
                                                        Configurar
                                                      • Lathe Tip (Negative) TNGG

                                                          MISUMI

                                                          Lathe Tip (Negative) TNGG【10 unidades】

                                                          Achieves the high finish surface roughness with the use of the cermet material
                                                          Ler mais
                                                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                          T (Triangle)Outer Diameter/Inner Diameter6Steel / Stainless SteelFinishNegativeRight-hand / Left-hand0.4 ~ 0.8-
                                                          Preço (excluindo IVA) a partir de:
                                                          107.16 €
                                                          Data de envio regular:
                                                          5 dias úteis
                                                          Configurar
                                                        • Negative Tip for T-Max P Turning Tool
                                                          • Volume Discount

                                                          SANDVIK

                                                          Negative Tip for T-Max P Turning Tool

                                                          Unique shape exhibits high performance
                                                          Ler mais
                                                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                          C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinishNegativeNo-hand0.4 ~ 0.8-
                                                          Preço (excluindo IVA) a partir de:
                                                          23.40 €
                                                          Data de envio regular:
                                                          6 dias úteis
                                                          Configurar
                                                        • CORO-TURN 107 Positive Tip for Machining

                                                            SANDVIK

                                                            CORO-TURN 107 Positive Tip for Machining

                                                            Unique shape exhibits high performance
                                                            Ler mais
                                                            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                            C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinishPozidrivNo-hand0.2 ~ 0.8-
                                                            Preço (excluindo IVA) a partir de:
                                                            15.16 €
                                                            Data de envio regular:
                                                            6 dias úteis
                                                            Configurar
                                                          • T-MAX P for Turning

                                                              SANDVIK

                                                              T-MAX P for Turning

                                                              Unique shape exhibits high performance
                                                              Ler mais
                                                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                              D (55° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Heat-resistant alloy, titanium alloyFinishNegativeNo-hand0.4 ~ 1.2-
                                                              Preço (excluindo IVA) a partir de:
                                                              21.71 €
                                                              Data de envio regular:
                                                              6 dias úteis
                                                              Configurar
                                                            • X-Line Chip (Negative)
                                                              • Volume Discount

                                                              SANDVIK

                                                              X-Line Chip (Negative)

                                                              Unique shape exhibits high performance
                                                              Ler mais
                                                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                              T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness MaterialFinishNegativeNo-hand0.4 ~ 0.8-
                                                              Preço (excluindo IVA) a partir de:
                                                              19.22 €
                                                              Data de envio regular:
                                                              6 dias úteis
                                                              Configurar
                                                            • T-Max P Chip for Lathe Turning

                                                                SANDVIK

                                                                T-Max P Chip for Lathe Turning

                                                                Unique shape exhibits high performance
                                                                Ler mais
                                                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                V (35° Diamond-Shaped)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Heat-resistant alloy, titanium alloyFinishNegativeNo-hand0.8-
                                                                Preço (excluindo IVA) a partir de:
                                                                33.89 €
                                                                Data de envio regular:
                                                                6 dias úteis
                                                                Configurar
                                                              • Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge
                                                                • Volume Discount

                                                                KYOCERA

                                                                Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge

                                                                [Work materials]· Carbon steel and alloy steel· Stainless steel· Gray Cast Iron and Ductile Cast Iron[Insert Grade]· Cermet (TN6020)· MEGACOAT cermet (PV7010, PV7025)· PVD cermet (PV7020)· CVD coating (CA515, CA525, CA530, CA5505, CA5515, CA5525)
                                                                Ler mais
                                                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelFinishNegativeNo-hand0.8-
                                                                Preço (excluindo IVA) a partir de:
                                                                8.14 €
                                                                Data de envio regular:
                                                                6 dias úteis
                                                                Configurar
                                                              • Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing"
                                                                • Volume Discount

                                                                KYOCERA

                                                                Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing"

                                                                [Work materials]· Carbon steel and alloy steel· Stainless steel[Insert Grade]· Cermet (TN6010, TN6020)· MEGACOAT cermet (PV7010, PV7025)· CVD coating (CA515, CA525, CA5515, CA5525)
                                                                Ler mais
                                                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelFinishNegativeNo-hand0.2 ~ 1.2-
                                                                Preço (excluindo IVA) a partir de:
                                                                8.14 €
                                                                Data de envio regular:
                                                                6 dias úteis
                                                                Configurar
                                                              • Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing"
                                                                • Volume Discount

                                                                KYOCERA

                                                                Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing"

                                                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                C (80° Diamond-Shape)Outer Diameter/Inner Diameter4Steel / Stainless Steel / Cast IronFinishNegativeNo-hand0.2 ~ 0.8-
                                                                Preço (excluindo IVA) a partir de:
                                                                8.14 €
                                                                Data de envio regular:
                                                                6 dias úteis
                                                                Configurar
                                                              • Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R / L-S "for Finishing"

                                                                  KYOCERA

                                                                  Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R / L-S "for Finishing"

                                                                  [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                                                                  Ler mais
                                                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                  C (80° Diamond-Shape)Outer Diameter/Inner Diameter4Steel / Stainless Steel / Cast IronFinishNegativeRight-hand0.4-
                                                                  Preço (excluindo IVA) a partir de:
                                                                  12.99 €
                                                                  Data de envio regular:
                                                                  6 dias úteis
                                                                  Configurar
                                                                • Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GP "for Finishing"

                                                                    KYOCERA

                                                                    Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GP "for Finishing"

                                                                    [Specifications]· Shape: D (55° Diamond)· Number of Usable Corners: 4· Rake Angle: Negative· Handedness: No Handedness[Applications]· Machining Applications: For O.D., I.D.· Breaker Applications: Finishing
                                                                    Ler mais
                                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                    D (55° Diamond-Shape)Outer Diameter/Inner Diameter4Steel / Stainless SteelFinishNegativeNo-hand0.4 ~ 0.8-
                                                                    Preço (excluindo IVA) a partir de:
                                                                    10.99 €
                                                                    Data de envio regular:
                                                                    6 dias úteis
                                                                    Configurar
                                                                  • Square 90°, Negative, with Hole SNMG12○○-XP "Finishing", Soft Steel
                                                                    • Volume Discount

                                                                    KYOCERA

                                                                    Square 90°, Negative, with Hole SNMG12○○-XP "Finishing", Soft Steel

                                                                    [Specifications]· Shape: S (Quadrilateral)· Number of Available Corners: 8· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                                                                    Ler mais
                                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                    S (Rectangular)Outer Diameter/Inner Diameter8SteelFinishNegativeNo-hand0.8-
                                                                    Preço (excluindo IVA) a partir de:
                                                                    10.66 €
                                                                    Data de envio regular:
                                                                    6 dias úteis
                                                                    Configurar
                                                                  • 60° Triangle Negative with Hole TNMG○○GP "Finishing"
                                                                    • Volume Discount

                                                                    KYOCERA

                                                                    60° Triangle Negative with Hole TNMG○○GP "Finishing"

                                                                    [Specifications]· Shape: T (Triangle)· Number of Usable Corners: 6· Rake Angle: Negative· Handedness: No Handedness[Applications]· Machining Applications: For O.D., I.D.· Breaker Applications: Finishing
                                                                    Ler mais
                                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                    T (Triangle)Outer Diameter/Inner Diameter6Steel / Stainless SteelFinishNegativeNo-hand0.2 ~ 0.8-
                                                                    Preço (excluindo IVA) a partir de:
                                                                    7.14 €
                                                                    Data de envio regular:
                                                                    6 dias úteis
                                                                    Configurar
                                                                  • 60° Triangle Negative with Hole TNGG16○○-S "Finishing"

                                                                      KYOCERA

                                                                      60° Triangle Negative with Hole TNGG16○○-S "Finishing"

                                                                      [Specifications]· Shape: T (Triangle)· Number of Available Corners: 6· Rake Angle: Negative[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                                                                      Ler mais
                                                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                      T (Triangle)Outer Diameter/Inner Diameter6Steel / Stainless SteelFinishNegativeRight-hand / Left-hand0.2 ~ 0.4-
                                                                      Preço (excluindo IVA) a partir de:
                                                                      10.16 €
                                                                      Data de envio regular:
                                                                      6 dias úteis
                                                                      Configurar
                                                                    • Turning Insert Diamond 35°, Negative, with Hole, VNMG○○GP, "for Finishing"
                                                                      • Volume Discount

                                                                      KYOCERA

                                                                      Turning Insert Diamond 35°, Negative, with Hole, VNMG○○GP, "for Finishing"

                                                                      [Specifications]· Shape: V (35° Diamond)· Number of Usable Corners: 4· Rake Angle: Negative· Handedness: No Handedness[Applications]· Machining Applications: For O.D., I.D.· Breaker Applications: Finishing
                                                                      Ler mais
                                                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                      V (35° Diamond-Shaped)Outer Diameter/Inner Diameter4SteelFinishNegativeNo-hand0.4 ~ 0.8-
                                                                      Preço (excluindo IVA) a partir de:
                                                                      12.50 €
                                                                      Data de envio regular:
                                                                      6 dias úteis
                                                                      Configurar
                                                                    • Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-GF "for Finishing"

                                                                        KYOCERA

                                                                        Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-GF "for Finishing"

                                                                        [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                                                                        Ler mais
                                                                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                        C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Stainless SteelFinishPozidrivNo-handOther-
                                                                        Preço (excluindo IVA) a partir de:
                                                                        15.00 €
                                                                        Data de envio regular:
                                                                        6 dias úteis
                                                                        Configurar
                                                                      • Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing"

                                                                          KYOCERA

                                                                          Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing"

                                                                          [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                                                                          Ler mais
                                                                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                          C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast IronFinishPozidrivLeft-hand0.2 ~ Other-
                                                                          Preço (excluindo IVA) a partir de:
                                                                          16.03 €
                                                                          Data de envio regular:
                                                                          6 dias úteis
                                                                          Configurar