Spiral Taps

• 

  • DESCONTO
  • Volume Discount

  OSG

  A Tap Series, Spiral Tap, A-SFT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified	1-8UNC ～ M56	0.25 ～ 5.5	1.5P ～ 2.5P	Powder high-speed steel / Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Preço (excluindo IVA) a partir de:

  16.04 €

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  REX TOOLS

  Hand tap set

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M3 ～ Mf32	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  12.85 €

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount
  • Stock

  OSG

  Spiral Tap Series, General Purpose EX-SFT

  Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified	1UN ～ M56	0.25 ～ 48	2.5P ～ 3P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  7.97 €

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless EX-SUS-SFT

  Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified / Whitworth	1UN ～ M42	0.4 ～ 48	2.5P ～ 3P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  8.81 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  CC-HL-SFT, HSSE spiral-fluted cutting tap for blind holes, Helicoil EG-UNJF

  For general steels, stainless steels, aluminum - Developed for rigid tapping on CNC machines - For thread insert

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  45.10 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  WERA

  Tapping head

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  7.75 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  REX TOOLS

  Treaded tool holder

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M3 - M10 ～ M5 - M12	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  9.08 €

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

  Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M36	0.4 ～ 4	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  14.47 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, General Purpose Sewing Machine (SM) Screw, EX-SFT-SM

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Sewing Machine	SM1/4 ～ SM15/64	20 ～ 56	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  10.88 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  A Tap Series, Spiral Tap, Long Shank A-LT-SFT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.25 ～ 3	2.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Preço (excluindo IVA) a partir de:

  24.50 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  S-SFT, HSSE spiral-fluted cutting tap for blind holes, UNF

  General purpose tapping in steels and stainless steels

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  27.00 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  OSG

  TIN-SFT, HSSE spiral-fluted cutting tap for blind holes, Metric

  [Specifications]・HSSE spiral-fluted cutting tap for blind holes・TIN coating・For steels up to 850 N/mm2・Metric

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  22.10 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  OSG

  CC-NEO-SFT, HSSE spiral-fluted cutting tap for blind holes, MJ

  For general steels, stainless steels, aluminum - Variable helix for better chip evacuation

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  31.00 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  OSG

  H-HL-SFT, Powder metal low spiral-fluted cutting tap for blind holes, Helicoil EG-MJ

  For hardened steels up to 45 HRC - For thread insert

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  41.40 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  REX TOOLS

  CNC tapping head set

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  85.57 €

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  • Volume Discount

  REX TOOLS

  Thread gauge

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  8.03 €

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  SANDVIK

  SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter / Unified / Whitworth	G 1" ～ M48	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  17.98 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, High-Speed Synchronized Tap for Aluminium, HS-AL-SFT

  Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M6	0.4 ～ 1	3P	Vanadium High-Speed Steel	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  13.15 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  OSG

  Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

  Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1 ～ M30	0.25 ～ 3.5	1.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  8.69 €

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, Low Spiral LW-SFT

  Debris is chopped into fine pieces and expelled backward thanks to the grooves with a weak twist, allowing for stable tapping. Also has good chipping resistance qualities.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M6	1	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  9.50 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT

  Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	0.5 ～ 1.5	3P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Preço (excluindo IVA) a partir de:

  32.98 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  YAMAWA MFG

  Coating Spiral Tap AU+ SP

  Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M12	0.4 ～ 1.75	2.5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Preço (excluindo IVA) a partir de:

  21.93 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  YAMAWA MFG

  Long Shank Spiral Tap LS-SP(LS-N-SP)

  * LS-N-SP will switch to LS-SP as soon as the stock runs out.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M16	2	2.5P	High-speed steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  96.97 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  SG Spiral Tap SGSP

  [Features] -Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M12	1.5	2.5	Alloy HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Spiral Tap	For through hole / For blind hole	Available

  Preço (excluindo IVA) a partir de:

  62.89 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  V-TI-SFT, Powder metal low spiral-fluted cutting tap for blind holes, Metric

  [Specifications]・Powder metal low spiral-fluted cutting tap for blind holes・Multilayer TiCN coating・For Titanium alloys・Metric

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  47.50 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  OSG

  V-TI-SFT, Powder metal low spiral-fluted cutting tap for blind holes, UNJF

  [Specifications]・Powder metal low spiral-fluted cutting tap for blind holes・Multilayer TiCN coating・For Titanium alloys・UNJF

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  68.00 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  OSG

  S-SFT, HSSE spiral-fluted cutting tap for blind holes, BSF

  General purpose tapping in steels and stainless steels

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  36.90 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  OSG

  S-SFT, HSSE spiral-fluted cutting tap for blind holes, BA

  General purpose tapping in steels and stainless steels

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  20.20 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  OSG

  V-EM-SFT, HSSE spiral-fluted cutting tap for blind holes, Metric

  For die cast aluminum - Center through coolant, with end cut, for pre-FORM Ed cast holes

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  55.60 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  OSG

  CC-LT-SFT, HSSE spiral-fluted cutting tap for blind holes, Metric

  For general steels, stainless steels, aluminum - Long reach threading

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  50.80 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  OSG

  HXL-SFT, HSSE low spiral-fluted cutting tap for blind holes, UNC

  For steels and cast iron - For horizontal applications in oil and heavy industry

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  110.40 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  WERA

  Tapping combo head

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  13.28 €

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount

  REX TOOLS

  Die metric

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M2 ～ M12	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  4.53 €

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  • Volume Discount

  RUKO

  Hand tap, Finish tap

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2	-	-	High-speed steel	-	Hand Tap	-	-

  Preço (excluindo IVA) a partir de:

  5.32 €

  Data de envio regular:

  3 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  Carbide Spiral Tap

  [Features] -Carbide tap with uncoated spiral flute-Can be used for machining blind holes-Suitable for mass production of aluminium and copper alloys

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	0.5 ～ 1.5	1.5 P ～ 2.5 P	Carbide	Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  33.14 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 unidades】

  [Features] -Multi-use tap for all materials from general steel, heat treated steel to stainless steel-Efficient chip removal due to short thread form and special flute shape.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M12	0.4 ～ 1.75	2.5 P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  50.83 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  TiN Coated High-Speed Steel Spiral Tap【1 a 5 unidades】

  The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	0.5 ～ 1.5	1.5 P ～ 2.5 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Spiral Tap	For blind hole	Available

  Preço (excluindo IVA) a partir de:

  14.23 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  High-Speed Steel Spiral Tap【10 unidades】

  [Features] -High speed uncoated steel tap with spiral flutes-Suitable for machining blind holes-Effective for materials with continuous chips such as carbon steel and steel alloys.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M12	0.4 ～ 1.75	2.5 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  71.27 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  MISUMI

  MT Series High-Speed Steel Spiral Tap

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.4 ～ 3	2.5 P	Cobalt HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Spiral Tap	For blind hole	N/A

  Preço (excluindo IVA) a partir de:

  7.62 €

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  NACHI(FUJIKOSHI)

  G Spiral Tap for Deep Holes in Stainless Steel GSPS

  Suited for stainless steel and materials that produce a lot of swarf.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8 ～ M16	1.25 ～ 2	2.5P	Alloy HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Spiral Tap	For blind hole	Available

  Preço (excluindo IVA) a partir de:

  33.01 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT

  Combining spiral tap with knurled flutes has brought in highly rigid edges. Assure long-lasting, stable machining of nickel-based alloy (40 - 45 HRC) processed under aging treatment.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M4 ～ M8	0.7 ～ 1.25	2.5P	Powder high-speed steel	Nickel-based alloy (Inconel, etc.)[◎]	Spiral Tap	For through hole	Available

  Preço (excluindo IVA) a partir de:

  22.41 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

  Allows internal threading of stainless steel with a water soluble cutting fluid.Tool material: Vanadium high speed steelHole type: For blind holesMaterial: General steel/stainless steel.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.4 ～ 3	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎]	Spiral Tap	For blind hole	Available

  Preço (excluindo IVA) a partir de:

  17.56 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, Tin Coated, TIN-SFT

  The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1.4 ～ M16	0.3 ～ 2	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Preço (excluindo IVA) a partir de:

  16.04 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT

  The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M16	0.5 ～ 2	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Preço (excluindo IVA) a partir de:

  23.77 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT

  Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.Tool material: Powder metal high-speed steelThread type: MetricHole type: For blind holesMaterial: General steel / heat-treated steelCoating: Surface treatment for steel.

  Ler mais

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M12	0.5 ～ 1.75	2.5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	Spiral Tap	For blind hole	Available

  Preço (excluindo IVA) a partir de:

  17.33 €

  Data de envio regular:

  6 dias úteis

  Configurar