GANTER Clamping Levers（Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Clamping bolts, upward clamping, Stainless Steel
GANTER
Stainless Steel-Clamping bolts GN 918.6 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.
The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 83.52 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamping kits
GANTER
With clamping kits GN 511.1 swivel clamp mountings GN 482 can be combined with T-Swivel clamp mountings GN 483 and attachment clamp mountings GN 484 with the same k-dimensions into swivel clamp mounting
joints.
The centering bushing positions the swivel clamp mountings in relation to each other. During assembly, the knurled threaded bushing is inserted by the clamping screw itself and by pressing into one of the two swivel
clamp mountings and so serves to clamp the articulated joint.
The matching clamping kits are shown in the dimensional tables of the appropriate swivel clamp mountings.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 4.66 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Clamping kits, Zinc die casting / Stainless Steel
GANTER
For clamp mountings, the clamping kits GN 511 replace the hexagon socket screw DIN 912. It is used on all clamping points where repeated clamping actions are required, e.g. for adjusting a stop mechanism.
The matching clamping kits for each clamping thread are listed in the dimensional tables of the clamp mountings.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Clamping levers with eccentrical cam, Lever zinc die casting
GANTER
Clamping levers with eccentrical cam GN 927.4 with Stainless Steel-threaded stud are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
There are no loose components since they are all assembled and mounted in their correct order.
Type A has the following benefits:
The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
With these clamping levers with eccentrical cam GN 927.4 , clamping forces of up to 8 kN can be reached.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 12.42 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamping levers, Steel
GANTER
The official DIN standard sheet specifies additional sizes 40 - M5 / B5.- Volume Discount
Starting from∗ ： 6.48 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Control levers, Steel
GANTER
The cover hides fasteners (see assembly instructions) and provides a printing facility for any symbol or logo.
On assembly, the cover is pushed in by hand and can be removed with a screw driver via a suitable slot.
Control levers GN 750 can also be supplied as standard with:
Square DIN 79 V + Bore diameter
Keyway DIN 6885 K + Bore diameter- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 20.56 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Eccentrical cams, radial clamping, Steel
GANTER
Eccentrical cams GN 918 allow the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. The cam not only has the advantage that the clamping effect is of the same magnitude over the whole of the clamping surface (i.e. in every angular position), but also that it is self-arresting in every position.
The ball lever is linked with the eccentric cam via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the "readjustment" of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the eccentric cam can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 54.30 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Short clamping levers, Steel
GANTER
Short clamping levers, Steel- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 8.56 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Stainless Steel-Clamp nuts with double lever
GANTER
Stainless Steel-Clamp nuts with double lever- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 12.82 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Stainless Steel-Clamp nuts with double lever, AISI 316L (A4)
GANTER
Stainless Steel-Clamp nuts with double lever, AISI 316L (A4)- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 17.34 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Stainless Steel-Clamp nuts, AISI 316L (A4)
GANTER
Stainless Steel-Clamp nuts, AISI 316L (A4)- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 11.76 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Stainless-Steel-Clamp-nuts AISI 304
GANTER
Stainless-Steel-Clamp-nuts AISI 304- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 8.18 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Adjustable hand levers for set collars (GN 311)
GANTER
For set collars of the standard families GN 706... and GN 707..., the adjustable hand levers GN 311 replace the hexagon socket screw DIN 912. That allows the set collars to be adjusted easily and quickly without tools.The table of dimensions of the set collars shows the corresponding hand lever for the respective set collar size d1.Under GN 706.4, semi-split set collars GN 706.2 are generally offered with clamping levers.- Volume Discount
Starting from∗ ： 12.40 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat adjustable hand levers, zinc die casting, bushing Stainless Steel (GN 302.1)
GANTER
Adjustable hand levers GN 302.1 have a straight lever, not inclined, being parallel to the clamping space.Adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.- Volume Discount
Starting from∗ ： 8.56 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat adjustable tension levers, Zinc die casting, bushing Stainless Steel (GN 126.1)
GANTER
Flat adjustable tension levers GN 126.1 are characterized by their low height and the timelessly elegant design.They are ideal whenever swiveling in a confined space is required or the lever is to be clamped in a particular position. The threaded insert / bored bushing is moveably attached to the handle with serrations.Pulling the lever disengages the serrations, allowing it to be swiveled to the ideal clamping position. On “releasing” the handle, the serrations re-engage automatically.- Volume Discount
Starting from∗ ： 23.96 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat adjustable tension levers, zinc die casting, bushing steel (GN 126)
GANTER
Flat adjustable tension levers GN 126 are characterized by their low height and the timelessly elegant design.They are ideal whenever swiveling in a confined space is required or the lever is to be clamped in a particular position. The threaded insert / bored bushing is moveably attached to the handle with serrations.Pulling the lever disengages the serrations, allowing it to be swiveled to the ideal clamping position. On “releasing” the handle, the serrations re-engage automatically.- Volume Discount
Starting from∗ ： 14.78 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat adjustable tension levers, zinc die casting, threaded stud Stainless Steel (GN126.1)
GANTER
Flat adjustable tension levers GN 126.1 are characterized by their low height and the timelessly elegant design.They are ideal whenever swiveling in a confined space is required or the lever is to be clamped in a particular position. The threaded insert / bored bushing is moveably attached to the handle with serrations.Pulling the lever disengages the serrations, allowing it to be swiveled to the ideal clamping position. On “releasing” the handle, the serrations re-engage automatically.- Volume Discount
Starting from∗ ： 25.60 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 9.90 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 7.62 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 62.26 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 63.06 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat adjustable hand levers, Zinc die casting, threaded stud Stainless Steel (GN302.1)
GANTER
- Volume Discount
Starting from∗ ： 5.96 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat adjustable hand levers, zinc die casting, bushing Stainless Steel (GN 302.1)
GANTER
- Volume Discount
Starting from∗ ： 8.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 5.02 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 9.70 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Type Clamp |
| Type operation |
| Operation Direction |
| Shape |
| L-Shaped Clamp Lever Shape |
| Lever Shape with Knob |
| Mounting Section Type |
| Rotating Radius R(mm) |
| Main Body Material |
| Main Body Surface Treatment |
| Mounting Section Material |
| Mounting Section Surface Treatment |
| Knob Material |
| Surface Treatment of knob |
| Adjustment screw for gap |
| Mounting Section Diameter d(mm) and/or Diameter |
| Mounting Section Length L(mm) |
| Mounting Section Diameter C(mm) |
| Mounting Section Thickness h(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Product Series | Clamping levers with eccentrical cam, Lever zinc die casting | Stainless Steel-Clamp nuts with double lever, AISI 316L (A4) | Flat adjustable hand levers, zinc die casting, bushing Stainless Steel (GN 302.1) | Flat adjustable tension levers, Zinc die casting, bushing Stainless Steel (GN 126.1) | Flat adjustable tension levers, zinc die casting, bushing steel (GN 126) | Flat adjustable tension levers, zinc die casting, threaded stud Stainless Steel (GN126.1) | Adjustable hand levers releasing button, zinc die casting, threaded stud st | Adjustable hand levers, Zinc die casting, Bushing, Stainless Steel | Flat adjustable hand levers, Zinc die casting, threaded stud Stainless Steel (GN302.1) | Flat adjustable hand levers, zinc die casting, bushing Stainless Steel (GN 302.1) | Adjustable hand levers releasing button, zinc die casting, bushing steel zi | ||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||
| Starting from∗ | 83.52 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 4.66 € *Unit price with basic configuration Volume Discount | 7.26 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 12.42 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 6.48 € *Unit price with basic configuration Volume Discount | 20.56 € *Unit price with basic configuration Volume Discount | 54.30 € *Unit price with basic configuration Volume Discount | 8.56 € *Unit price with basic configuration Volume Discount | 12.82 € *Unit price with basic configuration Volume Discount | 17.34 € *Unit price with basic configuration Volume Discount | 11.76 € *Unit price with basic configuration Volume Discount | 8.18 € *Unit price with basic configuration Volume Discount | 12.40 € *Unit price with basic configuration Volume Discount | 8.56 € *Unit price with basic configuration Volume Discount | 23.96 € *Unit price with basic configuration Volume Discount | 14.78 € *Unit price with basic configuration Volume Discount | 25.60 € *Unit price with basic configuration Volume Discount | 9.90 € *Unit price with basic configuration Volume Discount | 7.62 € *Unit price with basic configuration Volume Discount | 62.26 € *Unit price with basic configuration Volume Discount | 63.06 € *Unit price with basic configuration Volume Discount | 5.96 € *Unit price with basic configuration Volume Discount | 8.36 € *Unit price with basic configuration Volume Discount | 5.02 € *Unit price with basic configuration Volume Discount | 9.70 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | 7 Days | Same day | Same day | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type Clamp | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type operation | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operation Direction | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| L-Shaped Clamp Lever Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lever Shape with Knob | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Rotating Radius R(mm) | - | - | - | 63 ～ 101 | 50 ～ 200 | - | - | - | - | - | 63 ～ 100 | 63 ～ 160 | 30 ～ 45 | 30 ～ 78 | 120 ～ 145 | 120 ～ 145 | 120 ～ 145 | - | - | - | - | - | - | - | - |
| Main Body Material | - | - | - | - | - | - | - | - | - | Stainless Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Knob Material | - | - | - | - | - | - | - | - | - | - | Stainless Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment of knob | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Adjustment screw for gap | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Diameter d(mm) and/or Diameter | - | 4 ～ 6 | 4 ～ 6 | - | 20 | - | - | - | - | - | - | - | 4 ～ 6 | 4 ～ 12 | 8 ～ 16 | 8 ～ 16 | 10 ～ 16 | - | - | - | - | - | - | - | - |
| Mounting Section Length L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Diameter C(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Thickness h(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Application
- Clamp
- Operation
- Related Components
-
Type Clamp
-
Type operation
-
Operation Direction
-
Shape
-
L-Shaped Clamp Lever Shape
-
Lever Shape with Knob
-
Mounting Section Type
- Male thread
- Female Thread
- Round Hole
- Square Hole
-
Rotating Radius R(mm)
- 25
- 26
- 30
- 33.5
- 36.2
- 39
- 39.9
- 40
- 40.1
- 42
- 43
- 44
- 45
- 46.5
- 47.5
- 47.9
- 48
- 50
- 52.3
- 55
- 59.5
- 60
- 62
- 63
- 63.5
- 64
- 64.5
- 64.9
- 65
- 65.2
- 67
- 68
- 70
- 70.4
- 71.5
- 74
- 75
- 75.5
- 76
- 78
- 78.5
- 79
- 79.5
- 80
- 80.2
- 80.3
- 81
- 81.1
- 82
- 83
- 84
- 84.5
- 85
- 87
- 88
- 88.1
- 88.5
- 89
- 90
- 92
- 93
- 94.5
- 95
- 95.4
- 96
- 96.8
- 97
- 99
- 99.9
- 100
- 101
- 102
- 104
- 106
- 108
- 109
- 109.9
- 110
- 110.9
- 111
- 114
- 115
- 118
- 119
- 120
- 121
- 123
- 123.5
- 125
- 126
- 126.5
- 127
- 128
- 128.5
- 130
- 131
- 132
- 134
- 134.5
- 136
- 138
- 140
- 145
- 146
- 148
- 150
- 152
- 157
- 160
- 170
- 180
- 187.5
- 190
- 200
- 230
- 300
- 400
-
Main Body Material
- Stainless Steel
- Steel
- Zinc Alloy
- Polyamide
- Nylon
- Aluminum
- Other
-
Main Body Surface Treatment
-
Mounting Section Material
-
Mounting Section Surface Treatment
-
Knob Material
-
Surface Treatment of knob
-
Adjustment screw for gap
-
Mounting Section Diameter d(mm) and/or Diameter
-
Mounting Section Length L(mm)
-
Mounting Section Diameter C(mm)
-
Mounting Section Thickness h(mm)
Narrow search by specifying Brand
-
- MISUMI (19)
- NORELEM (264)
- KIPP (152)
- ESCO (117)
- GANTER (70)
- HALDER (47)
- KONISHI MFG (30)
- IMAO CORPORATION (25)
- NABEYA BI-TECH (21)
- ELESA (18)
- EUROFLEX (3)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Clamping Levers
-
- Telescopic Slide Rails
- Fasteners, Draw Latches
- Latch Handles, Locks, Keys
- Wires, Chains, Metal Fittings, Small Work Pieces
- Parts, Small Work Pieces
- Hooks and Shackels
- Handles
- Clamping Knobs
- Clamping Levers
- Rotation Handles, Crank Handles
- Handles / Bow handles / Cup handles / Trough handles / Carrying handles
- Hinges
- Building Hardware / Interiors / Exteriors
-
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.